- 18 Dec, 2012 40 commits
-
-
Andrew Vagin authored
Without this patch it is really hard to interpret a bounding set, if CAP_LAST_CAP is unknown for a current kernel. Non-existant capabilities can not be deleted from a bounding set with help of prctl. E.g.: Here are two examples without/with this patch. CapBnd: ffffffe0fdecffff CapBnd: 00000000fdecffff I suggest to hide non-existent capabilities. Here is two reasons. * It's logically and easier for using. * It helps to checkpoint-restore capabilities of tasks, because tasks can be restored on another kernel, where CAP_LAST_CAP is bigger. Signed-off-by:
Andrew Vagin <avagin@openvz.org> Cc: Andrew G. Morgan <morgan@kernel.org> Reviewed-by:
Serge E. Hallyn <serge.hallyn@canonical.com> Cc: Pavel Emelyanov <xemul@parallels.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: James Morris <jmorris@namei.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
Ptrace jailers want to be sure that the tracee can never escape from the control. However if the tracer dies unexpectedly the tracee continues to run in potentially unsafe mode. Add the new ptrace option PTRACE_O_EXITKILL. If the tracer exits it sends SIGKILL to every tracee which has this bit set. Note that the new option is not equal to the last-option << 1. Because currently all options have an event, and the new one starts the eventless group. It uses the random 20 bit, so we have the room for 12 more events, but we can also add the new eventless options below this one. Suggested by Amnon Shiloh. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Tested-by:
Amnon Shiloh <u3557@miso.sublimeip.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Chris Evans <scarybeasts@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eldad Zack authored
Update the documentation for simple_strto* to reflect that it has been obsoleted and advise the usage of kstrto*. Signed-off-by:
Eldad Zack <eldad@fogrefinery.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Joe Perches <joe@perches.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by:
-
Eldad Zack authored
As Bruce Fields pointed out, kstrto* is currently lacking kerneldoc comments. This patch adds kerneldoc comments to common variants of kstrto*: kstrto(u)l, kstrto(u)ll and kstrto(u)int. Signed-off-by:
-
Jarkko Sakkinen authored
keys-ecryptfs.txt was missing from 00-INDEX. Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@intel.com> Signed-off-by:
-
Dave Reisner authored
Option parsing code expects an unsigned integer for the codepage option, but prefixes and stores this option with "cp" before passing to load_nls(). This makes the displayed option in /proc an invalid one. Strip the prefix when printing so that the displayed option is valid for reuse. Signed-off-by:
Dave Reisner <dreisner@archlinux.org> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Jan Kara authored
parse_options() is supposed to return value < 0 on error however we returned 0 (success) in a lot of cases. This actually was not a problem in practice because match_token() used by parse_options() is clever and catches most of the problems for us. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Jan Kara authored
So far FAT either offsets time stamps by sys_tz.minuteswest or leaves them as they are (when tz=UTC mount option is used). However in some cases it is useful if one can specify time stamp offset on his own (e.g. when time zone of the camera connected is different from time zone of the computer, or when HW clock is in UTC and thus sys_tz.minuteswest == 0). So provide a mount option time_offset= which allows user to specify offset in minutes that should be applied to time stamps on the filesystem. akpm: this code would work incorrectly when used via `mount -o remount', because cached inodes would not be updated. But fatfs's fat_remount() is basically a no-op anyway. Signed-off-by:
-
Namjae Jeon authored
Change fatfs so that a warning is emitted when an attempt is made to mount a filesystem with the unsupported `discard' option. ext4 aready does this: http://patchwork.ozlabs.org/patch/192668/Signed-off-by:
Namjae Jeon <linkinjeon@gmail.com> Signed-off-by:
Amit Sahrawat <amit.sahrawat83@gmail.com> Acked-by:
-
Ashish Jangam authored
A driver for the DA9055 PMIC. This has a dependency upon the DA9055 MFD core. Functionally tested on Samsung SMDKV6410. Signed-off-by:
David Dajun Chen <dchen@diasemi.com> Signed-off-by:
Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Sachin Kamat authored
This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Kim, Milo authored
Enabling RTC HW block depends on the default value of TPS65910 register. In some mode, RTC block is disabled by default.(eg. AM3517 Craneboard) In this case, RTC_PWDN(RTC power down) bit should be cleared to enable the RTC HW block. This patch also works in case that RTC block is active by default, because there is no side effect even if the bit is updated again. Tested on AM3517 Craneboard. Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by:
Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Sivaram Nair <sivaramn@nvidia.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Sachin Kamat authored
This code is under #if 0 and not used. Signed-off-by:
-
Tushar Behera authored
rtc-s3c driver is modified to use devm_request_and_ioremap() (combining request_mem_region and ioremap), devm_clk_get() and devm_request_irq() APIs. Since this removes the necessity of freeing the related resources the return path is also simplified. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by:
-
Tushar Behera authored
err_nores label redirects to a simple return statement. Move the return statement to caller location and remove the label. Signed-off-by:
-
Thierry Reding authored
Add an RTC driver for PCF8523 chips by NXP Semiconductors. No support is currently provided for the alarm and interrupt functions. Only the time and date functionality is implemented. Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Devendra Naga authored
Use devm_kzalloc() and remove the error path free and the unload free as devm functions take care of freeing resources. Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by:
-
Devendra Naga authored
rtc_device_register() returns a pointer containing error code in case of error. Use that in the error return. Signed-off-by:
-
Sivaram Nair authored
A cosmetic change to rename the irq name to match the device name. Signed-off-by:
Sivaram Nair <sivaramn@nvidia.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Deepak Sikri authored
The applications can set the RTC hardware to trigger interrupts in one of three modes: * AIE: Alarm interrupt * UIE: Update interrupt (ie: once per second) * PIE: Periodic interrupt (sub-second irqs) The above defined 3 modes are to be supported in the RTC HW in form of interrupts. The SPEAr RTC hardware does not support the later two modes. There have been refinements in the RTC core in mainline related to use of timer queue infrastructure to manage events in RTC. Please refer the below mentioned patch for details: * RTC: Rework RTC code to use timerqueue for events * SHA ID: 6610e089 There have been provisions added to support hardware that do not have support the UIE mode. Please refer the following patch. * rtc: Provide flag for rtc devices that don't support UIE * SHA ID: 4a649903 The patch makes use of the provision defined in the above patch to update the hardware status of UIE mode. Signed-off-by:Deepak Sikri <deepak.sikri@st.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Deepak Sikri authored
clk_{un}prepare is mandatory for platforms using common clock framework. Because for SPEAr we don't do anything in clk_{un}prepare() calls, just call them once in probe/remove. Signed-off-by: -
Viresh Kumar authored
Free the rtc-spear driver from tension of freeing resources :) devm_* derivatives of multiple routines are used while allocating resources, which would be freed automatically by kernel. Signed-off-by:
-
Wei Yongjun authored
In case of error, test_init() needs to call platform_device_del() instead of platform_device_unregister(). Otherwise, we may call platform_device_put() twice. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) [akpm@linux-foundation.org: improve label naming] Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Devendra Naga authored
Replace the kzalloc() and kfree() calls with devm_kzalloc(). Signed-off-by:
Tony Prisk <linux@prisktech.co.nz> Signed-off-by:
-
Roland Stigge authored
Add device tree support to the rtc-imxdi driver. Signed-off-by:
Roland Stigge <stigge@antcom.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Roland Stigge authored
Enable support for i.MX53 in addition to i.MX25 by enabling the driver on ARCH_MXC generally. Signed-off-by:
-
Vaibhav Hiremath authored
OMAP1 RTC driver is used in multiple devices like, OMAPL138 and AM33XX. Driver currently doesn't handle any clocks, which may be right for OMAP1 architecture but in case of AM33XX, the clock/module needs to be enabled in order to access the registers. So convert this driver to runtime pm, which internally handles rest. [afzal@ti.com: handle error path] Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
Afzal Mohammed <afzal@ti.com> Acked-by:
Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
-
Afzal Mohammed authored
rtc-omap driver can be reused for AM33xx RTC. Provide dependency in Kconfig. Signed-off-by:
-
Afzal Mohammed authored
Enhance rtc-omap driver with DT capability Signed-off-by:
-
Afzal Mohammed authored
rtc-omap driver is now capable of handling kicker mechanism, hence remove kicker handling at platform level, instead provide proper device name so that driver can handle kicker mechanism by itself Signed-off-by:
-
Afzal Mohammed authored
OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by:
-
Alan Cox authored
If elf_core_dump() is called and fill_note_info() fails in the kmalloc() then it returns 0 but has not yet initialised all the needed fields. As a result we do a kfree(randomness) after correctly skipping the thread data. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Joe Perches authored
Store the camelcase variables in a hash and only emit a warning on the first use of each new variable. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Joe Perches authored
Even though the kernel doesn't support using floating point constants, add a regex for them. Support forms like: 0x123p1, 123e-1, 1.23, 1.5e23f Signed-off-by:
-
Joe Perches authored
Hexadecimal values are current found in 2 parts. A hex constant like 0x123456abcdef is found as 0 and then x123456abcdef and later coalesced. Instead, reverse the order of the 2 searches in $Constant to find 0x first, then 0 so that the entire hex constant is found all at once. Signed-off-by:
-
Joe Perches authored
switch default case is sometimes written as "default:;". This can cause new cases added below the default to be defective. Suggest adding a break; after empty default cases to avoid fallthrough defects. Fixed indentation in the other semicolon test above it. Suggested-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Joe Perches authored
spinlock_t should always be used. Signed-off-by:
"Luis R. Rodriguez" <mcgrof@do-not-panic.com> Signed-off-by:
-
Joe Perches authored
Blank lines around braces are not unnecessary. Emit a message on the use of these blank lines only when using --strict. int foo(int bar) { something or other.... } is generally written in the kernel as: int foo(int bar) { something or other... } Signed-off-by: -
Joe Perches authored
Preprocessor directives and asm statements should be allowed to have a line continuation. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Joe Perches authored
Some projects might want a longer line length so allow a command line --max-line-length=n control over the long line warnings. The default line length is 80. Signed-off-by:
-
