- 19 Jun, 2024 4 commits
-
-
Jose Ignacio Tornos Martinez authored
After ecf848eb ("net: usb: ax88179_178a: fix link status when link is set to down/up") to not reset from usbnet_open after the reset from usbnet_probe at initialization stage to speed up this, some issues have been reported. It seems to happen that if the initialization is slower, and some time passes between the probe operation and the open operation, the second reset from open is necessary too to have the device working. The reason is that if there is no activity with the phy, this is "disconnected". In order to improve this, the solution is to detect when the phy is "disconnected", and we can use the phy status register for this. So we will only reset the device from reset operation in this situation, that is, only if necessary. The same bahavior is happening when the device is stopped (link set to down) and later is restarted (link set to up), so if the phy keeps working we only need to enable the mac again, but if enough time passes between the device stop and restart, reset is necessary, and we can detect the situation checking the phy status register too. cc: stable@vger.kernel.org # 6.6+ Fixes: ecf848eb ("net: usb: ax88179_178a: fix link status when link is set to down/up") Reported-by:
Yongqin Liu <yongqin.liu@linaro.org> Reported-by:
Antje Miederhöfer <a.miederhoefer@gmx.de> Reported-by:
Arne Fitzenreiter <arne_f@ipfire.org> Tested-by:
Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xiaolei Wang authored
commit be27b896 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") introduced a problem. When deleting, it prompts "Invalid portTransmitRate 0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable. Only when offload is enabled, speed divider needs to be calculated. Fixes: be27b896 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240617013922.1035854-1-xiaolei.wang@windriver.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Oleksij Rempel authored
Get master/slave configuration for initial system start with the link in down state. This ensures ethtool shows current configuration. Also fixes link reconfiguration with ethtool while in down state, preventing ethtool from displaying outdated configuration. Even though dp83tg720_config_init() is executed periodically as long as the link is in admin up state but no carrier is detected, this is not sufficient for the link in admin down state where dp83tg720_read_status() is not periodically executed. To cover this case, we need an extra read role configuration in dp83tg720_config_aneg(). Fixes: cb80ee2f ("net: phy: Add support for the DP83TG720S Ethernet PHY") Cc: stable@vger.kernel.org Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240614094516.1481231-2-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
In case this PHY is bootstrapped for managed mode, we need to manually wake it. Otherwise no link will be detected. Cc: stable@vger.kernel.org Fixes: cb80ee2f ("net: phy: Add support for the DP83TG720S Ethernet PHY") Signed-off-by:
-
- 18 Jun, 2024 16 commits
-
-
Simon Horman authored
openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to obtain the first character of $ns. Empirically, this is works with bash but not dash. When run with dash these evaluate to an empty string and printing an error to stdout. # dash -c 'ns=client; echo "${ns:0:1}"' 2>error # cat error dash: 1: Bad substitution # bash -c 'ns=client; echo "${ns:0:1}"' 2>error c # cat error This leads to tests that neither pass nor fail. F.e. TEST: arp_ping [START] adding sandbox 'test_arp_ping' Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , } create namespaces ./openvswitch.sh: 282: eval: Bad substitution TEST: ct_connect_v4 [START] adding sandbox 'test_ct_connect_v4' Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , } ./openvswitch.sh: 322: eval: Bad substitution create namespaces Resolve this by making openvswitch.sh a bash script. Fixes: 918423fd ("selftests: openvswitch: add an initial flow programming case") Signed-off-by:Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240617-ovs-selftest-bash-v1-1-7ae6ccd3617b@kernel.orgSigned-off-by:
-
Dan Carpenter authored
On 32bit systems, the "4 * max" multiply can overflow. Use kcalloc() to do the allocation to prevent this. Fixes: 44c494c8 ("ptp: track available ptp vclocks information") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Heng Qi <hengqi@linux.alibaba.com> Link: https://lore.kernel.org/r/ee8110ed-6619-4bd7-9024-28c1f2ac24f4@moroto.mountainSigned-off-by:
-
Xin Long authored
zones_ht is a global hashtable for flow_table with zone as key. However, it does not consider netns when getting a flow_table from zones_ht in tcf_ct_init(), and it means an act_ct action in netns A may get a flow_table that belongs to netns B if it has the same zone value. In Shuang's test with the TOPO: tcf2_c <---> tcf2_sw1 <---> tcf2_sw2 <---> tcf2_s tcf2_sw1 and tcf2_sw2 saw the same flow and used the same flow table, which caused their ct entries entering unexpected states and the TCP connection not able to end normally. This patch fixes the issue simply by adding netns into the key of tcf_ct_flow_table so that an act_ct action gets a flow_table that belongs to its own netns in tcf_ct_init(). Note that for easy coding we don't use tcf_ct_flow_table.nf_ft.net, as the ct_ft is initialized after inserting it to the hashtable in tcf_ct_flow_table_get() and also it requires to implement several functions in rhashtable_params including hashfn, obj_hashfn and obj_cmpfn. Fixes: 64ff70b8 ("net/sched: act_ct: Offload established connections to flow table") Reported-by:
Shuang Li <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Xin Long authored
As it says in commit 3bc07321 ("xfrm: Force a dst refcount before entering the xfrm type handlers"): "Crypto requests might return asynchronous. In this case we leave the rcu protected region, so force a refcount on the skb's destination entry before we enter the xfrm type input/output handlers." On TIPC decryption path it has the same problem, and skb_dst_force() should be called before doing decryption to avoid a possible crash. Shuang reported this issue when this warning is triggered: [] WARNING: include/net/dst.h:337 tipc_sk_rcv+0x1055/0x1ea0 [tipc] [] Kdump: loaded Tainted: G W --------- - - 4.18.0-496.el8.x86_64+debug [] Workqueue: crypto cryptd_queue_worker [] RIP: 0010:tipc_sk_rcv+0x1055/0x1ea0 [tipc] [] Call Trace: [] tipc_sk_mcast_rcv+0x548/0xea0 [tipc] [] tipc_rcv+0xcf5/0x1060 [tipc] [] tipc_aead_decrypt_done+0x215/0x2e0 [tipc] [] cryptd_aead_crypt+0xdb/0x190 [] cryptd_queue_worker+0xed/0x190 [] process_one_work+0x93d/0x17e0 Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Reported-by:
-
David Ruth authored
syzbot found hanging tasks waiting on rtnl_lock [1] A reproducer is available in the syzbot bug. When a request to add multiple actions with the same index is sent, the second request will block forever on the first request. This holds rtnl_lock, and causes tasks to hang. Return -EAGAIN to prevent infinite looping, while keeping documented behavior. [1] INFO: task kworker/1:0:5088 blocked for more than 143 seconds. Not tainted 6.9.0-rc4-syzkaller-00173-g3cdb4559 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/1:0 state:D stack:23744 pid:5088 tgid:5088 ppid:2 flags:0x00004000 Workqueue: events_power_efficient reg_check_chans_work Call Trace: <TASK> context_switch kernel/sched/core.c:5409 [inline] __schedule+0xf15/0x5d00 kernel/sched/core.c:6746 __schedule_loop kernel/sched/core.c:6823 [inline] schedule+0xe7/0x350 kernel/sched/core.c:6838 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6895 __mutex_lock_common kernel/locking/mutex.c:684 [inline] __mutex_lock+0x5b8/0x9c0 kernel/locking/mutex.c:752 wiphy_lock include/net/cfg80211.h:5953 [inline] reg_leave_invalid_chans net/wireless/reg.c:2466 [inline] reg_check_chans_work+0x10a/0x10e0 net/wireless/reg.c:2481 Fixes: 0190c1d4 ("net: sched: atomically check-allocate action") Reported-by: syzbot+b87c222546179f4513a7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b87c222546179f4513a7Signed-off-by:
David Ruth <druth@chromium.org> Reviewed-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240614190326.1349786-1-druth@chromium.orgSigned-off-by:
-
Paolo Abeni authored
Raju Lakkaraju says: ==================== net: lan743x: Fixes for multiple WOL related issues This patch series implement the following fixes: 1. Disable WOL upon resume in order to restore full data path operation 2. Support WOL at both the PHY and MAC appropriately 3. Remove interrupt mask clearing from config_init Patch-3 was sent seperately earlier. Review comments in link: https://lore.kernel.org/lkml/4a565d54-f468-4e32-8a2c-102c1203f72c@lunn.ch/T/ ==================== Link: https://lore.kernel.org/r/20240614171157.190871-1-Raju.Lakkaraju@microchip.comSigned-off-by:
-
Raju Lakkaraju authored
When the system resumes from sleep, the phy_init_hw() function invokes config_init(), which clears all interrupt masks and causes wake events to be lost in subsequent wake sequences. Remove interrupt mask clearing from config_init() and preserve relevant masks in config_intr(). Fixes: 7d901a1e ("net: phy: add Maxlinear GPY115/21x/24x driver") Reviewed-by:
Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by:
-
Raju Lakkaraju authored
Prevent options not supported by the PHY from being requested to it by the MAC Whenever a WOL option is supported by both, the PHY is given priority since that usually leads to better power savings. Fixes: e9e13b6a ("lan743x: fix for potential NULL pointer dereference with bare card") Reviewed-by:
-
Raju Lakkaraju authored
When Wake-on-LAN (WoL) is active and the system is in suspend mode, triggering a system event can wake the system from sleep, which may block the data path. To restore normal data path functionality after waking, disable all wake-up events. Furthermore, clear all Write 1 to Clear (W1C) status bits by writing 1's to them. Fixes: 4d94282a ("lan743x: Add power management support") Reviewed-by:
-
Stefan Wahren authored
The whole mechanism to remember occurred SPI interrupts is not atomic, which could lead to unexpected behavior. So fix this by using atomic bit operations instead. Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20240614145030.7781-1-wahrenst@gmx.netSigned-off-by:
-
Yue Haibing authored
Syzkaller hit a warning: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 7890 at lib/refcount.c:25 refcount_warn_saturate+0xdf/0x1d0 Modules linked in: CPU: 3 PID: 7890 Comm: tun Not tainted 6.10.0-rc3-00100-gcaa4f9578aba-dirty #310 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0xdf/0x1d0 Code: 41 49 04 31 ff 89 de e8 9f 1e cd fe 84 db 75 9c e8 76 26 cd fe c6 05 b6 41 49 04 01 90 48 c7 c7 b8 8e 25 86 e8 d2 05 b5 fe 90 <0f> 0b 90 90 e9 79 ff ff ff e8 53 26 cd fe 0f b6 1 RSP: 0018:ffff8881067b7da0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c72ac RDX: ffff8881026a2140 RSI: ffffffff811c72b5 RDI: 0000000000000001 RBP: ffff8881067b7db0 R08: 0000000000000000 R09: 205b5d3730353139 R10: 0000000000000000 R11: 205d303938375420 R12: ffff8881086500c4 R13: ffff8881086500c4 R14: ffff8881086500b0 R15: ffff888108650040 FS: 00007f5b2961a4c0(0000) GS:ffff88823bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055d7ed36fd18 CR3: 00000001482f6000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0xa3/0xc0 ? __warn+0xa5/0x1c0 ? refcount_warn_saturate+0xdf/0x1d0 ? report_bug+0x1fc/0x2d0 ? refcount_warn_saturate+0xdf/0x1d0 ? handle_bug+0xa1/0x110 ? exc_invalid_op+0x3c/0xb0 ? asm_exc_invalid_op+0x1f/0x30 ? __warn_printk+0xcc/0x140 ? __warn_printk+0xd5/0x140 ? refcount_warn_saturate+0xdf/0x1d0 get_net_ns+0xa4/0xc0 ? __pfx_get_net_ns+0x10/0x10 open_related_ns+0x5a/0x130 __tun_chr_ioctl+0x1616/0x2370 ? __sanitizer_cov_trace_switch+0x58/0xa0 ? __sanitizer_cov_trace_const_cmp2+0x1c/0x30 ? __pfx_tun_chr_ioctl+0x10/0x10 tun_chr_ioctl+0x2f/0x40 __x64_sys_ioctl+0x11b/0x160 x64_sys_call+0x1211/0x20d0 do_syscall_64+0x9e/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5b28f165d7 Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 8 RSP: 002b:00007ffc2b59c5e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5b28f165d7 RDX: 0000000000000000 RSI: 00000000000054e3 RDI: 0000000000000003 RBP: 00007ffc2b59c650 R08: 00007f5b291ed8c0 R09: 00007f5b2961a4c0 R10: 0000000029690010 R11: 0000000000000246 R12: 0000000000400730 R13: 00007ffc2b59cf40 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... This is trigger as below: ns0 ns1 tun_set_iff() //dev is tun0 tun->dev = dev //ip link set tun0 netns ns1 put_net() //ref is 0 __tun_chr_ioctl() //TUNGETDEVNETNS net = dev_net(tun->dev); open_related_ns(&net->ns, get_net_ns); //ns1 get_net_ns() get_net() //addition on 0 Use maybe_get_net() in get_net_ns in case net's ref is zero to fix this Fixes: 0c3e0e3b ("tun: Add ioctl() TUNGETDEVNETNS cmd to allow obtaining real net ns of tun device") Signed-off-by:Yue Haibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20240614131302.2698509-1-yuehaibing@huawei.comSigned-off-by:
-
Eric Dumazet authored
ip6_dst_idev() can return NULL, xfrm6_get_saddr() must act accordingly. syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 12 Comm: kworker/u8:1 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Workqueue: wg-kex-wg1 wg_packet_handshake_send_worker RIP: 0010:xfrm6_get_saddr+0x93/0x130 net/ipv6/xfrm6_policy.c:64 Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 97 00 00 00 4c 8b ab d8 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 86 00 00 00 4d 8b 6d 00 e8 ca 13 47 01 48 b8 00 RSP: 0018:ffffc90000117378 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88807b079dc0 RCX: ffffffff89a0d6d7 RDX: 0000000000000000 RSI: ffffffff89a0d6e9 RDI: ffff88807b079e98 RBP: ffff88807ad73248 R08: 0000000000000007 R09: fffffffffffff000 R10: ffff88807b079dc0 R11: 0000000000000007 R12: ffffc90000117480 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4586d00440 CR3: 0000000079042000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> xfrm_get_saddr net/xfrm/xfrm_policy.c:2452 [inline] xfrm_tmpl_resolve_one net/xfrm/xfrm_policy.c:2481 [inline] xfrm_tmpl_resolve+0xa26/0xf10 net/xfrm/xfrm_policy.c:2541 xfrm_resolve_and_create_bundle+0x140/0x2570 net/xfrm/xfrm_policy.c:2835 xfrm_bundle_lookup net/xfrm/xfrm_policy.c:3070 [inline] xfrm_lookup_with_ifid+0x4d1/0x1e60 net/xfrm/xfrm_policy.c:3201 xfrm_lookup net/xfrm/xfrm_policy.c:3298 [inline] xfrm_lookup_route+0x3b/0x200 net/xfrm/xfrm_policy.c:3309 ip6_dst_lookup_flow+0x15c/0x1d0 net/ipv6/ip6_output.c:1256 send6+0x611/0xd20 drivers/net/wireguard/socket.c:139 wg_socket_send_skb_to_peer+0xf9/0x220 drivers/net/wireguard/socket.c:178 wg_socket_send_buffer_to_peer+0x12b/0x190 drivers/net/wireguard/socket.c:200 wg_packet_send_handshake_initiation+0x227/0x360 drivers/net/wireguard/send.c:40 wg_packet_handshake_send_worker+0x1c/0x30 drivers/net/wireguard/send.c:51 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240615154231.234442-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
syzbot caught a NULL dereference in rt6_probe() [1] Bail out if __in6_dev_get() returns NULL. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cb: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000658-0x000000000000065f] CPU: 1 PID: 22444 Comm: syz-executor.0 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:rt6_probe net/ipv6/route.c:656 [inline] RIP: 0010:find_match+0x8c4/0xf50 net/ipv6/route.c:758 Code: 14 fd f7 48 8b 85 38 ff ff ff 48 c7 45 b0 00 00 00 00 48 8d b8 5c 06 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 19 RSP: 0018:ffffc900034af070 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004521000 RDX: 00000000000000cb RSI: ffffffff8990d0cd RDI: 000000000000065c RBP: ffffc900034af150 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000002 R12: 000000000000000a R13: 1ffff92000695e18 R14: ffff8880244a1d20 R15: 0000000000000000 FS: 00007f4844a5a6c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31b27000 CR3: 000000002d42c000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rt6_nh_find_match+0xfa/0x1a0 net/ipv6/route.c:784 nexthop_for_each_fib6_nh+0x26d/0x4a0 net/ipv4/nexthop.c:1496 __find_rr_leaf+0x6e7/0xe00 net/ipv6/route.c:825 find_rr_leaf net/ipv6/route.c:853 [inline] rt6_select net/ipv6/route.c:897 [inline] fib6_table_lookup+0x57e/0xa30 net/ipv6/route.c:2195 ip6_pol_route+0x1cd/0x1150 net/ipv6/route.c:2231 pol_lookup_func include/net/ip6_fib.h:616 [inline] fib6_rule_lookup+0x386/0x720 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref net/ipv6/route.c:2639 [inline] ip6_route_output_flags+0x1d0/0x640 net/ipv6/route.c:2651 ip6_dst_lookup_tail.constprop.0+0x961/0x1760 net/ipv6/ip6_output.c:1147 ip6_dst_lookup_flow+0x99/0x1d0 net/ipv6/ip6_output.c:1250 rawv6_sendmsg+0xdab/0x4340 net/ipv6/raw.c:898 inet_sendmsg+0x119/0x140 net/ipv4/af_inet.c:853 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_write_iter+0x4b8/0x5c0 net/socket.c:1160 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x6b6/0x1140 fs/read_write.c:590 ksys_write+0x1f8/0x260 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 52e16356 ("[IPV6]: ROUTE: Add router_probe_interval sysctl.") Signed-off-by:
Jason Xing <kerneljasonxing@gmail.com> Reviewed-by:
-
Eric Dumazet authored
syzbot reminds us that in6_dev_get() can return NULL. fib6_nh_init() ip6_validate_gw( &idev ) ip6_route_check_nh( idev ) *idev = in6_dev_get(dev); // can be NULL Oops: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 11237 Comm: syz-executor.3 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b896 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 RIP: 0010:fib6_nh_init+0x640/0x2160 net/ipv6/route.c:3606 Code: 00 00 fc ff df 4c 8b 64 24 58 48 8b 44 24 28 4c 8b 74 24 30 48 89 c1 48 89 44 24 28 48 8d 98 e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 0f 85 b3 17 00 00 8b 1b 31 ff 89 de e8 b8 8b RSP: 0018:ffffc900032775a0 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffffc90003277a54 RDI: ffff88802b3a08d8 RBP: ffffc900032778b0 R08: 00000000000002fc R09: 0000000000000000 R10: 00000000000002fc R11: 0000000000000000 R12: ffff88802b3a08b8 R13: 1ffff9200064eec8 R14: ffffc90003277a00 R15: dffffc0000000000 FS: 00007f940feb06c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000245e8000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip6_route_info_create+0x99e/0x12b0 net/ipv6/route.c:3809 ip6_route_add+0x28/0x160 net/ipv6/route.c:3853 ipv6_route_ioctl+0x588/0x870 net/ipv6/route.c:4483 inet6_ioctl+0x21a/0x280 net/ipv6/af_inet6.c:579 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f940f07cea9 Fixes: 428604fb ("ipv6: do not set routes if disable_ipv6 has been enabled") Reported-by:Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by:
-
Matthieu Baerts (NGI0) authored
It is important to have fixed (sub)test names in TAP, because these names are used to identify them. If they are not fixed, tracking cannot be done. Some subtests from the userspace_pm selftest were using random numbers in their names: the client and server address IDs from $RANDOM, and the client port number randomly picked by the kernel when creating the connection. These values have been replaced by 'client' and 'server' words: that's even more helpful than showing random numbers. Note that the addresses IDs are incremented and decremented in the test: +1 or -1 are then displayed in these cases. Not to loose info that can be useful for debugging in case of issues, these random numbers are now displayed at the beginning of the test. Fixes: f589234e ("selftests: mptcp: userspace_pm: format subtests results in TAP") Cc: stable@vger.kernel.org Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by:
-
Eric Dumazet authored
Some applications were reporting ETIMEDOUT errors on apparently good looking flows, according to packet dumps. We were able to root cause the issue to an accidental setting of tp->retrans_stamp in the following scenario: - client sends TFO SYN with data. - server has TFO disabled, ACKs only SYN but not payload. - client receives SYNACK covering only SYN. - tcp_ack() eats SYN and sets tp->retrans_stamp to 0. - tcp_rcv_fastopen_synack() calls tcp_xmit_retransmit_queue() to retransmit TFO payload w/o SYN, sets tp->retrans_stamp to "now", but we are not in any loss recovery state. - TFO payload is ACKed. - we are not in any loss recovery state, and don't see any dupacks, so we don't get to any code path that clears tp->retrans_stamp. - tp->retrans_stamp stays non-zero for the lifetime of the connection. - after first RTO, tcp_clamp_rto_to_user_timeout() clamps second RTO to 1 jiffy due to bogus tp->retrans_stamp. - on clamped RTO with non-zero icsk_retransmits, retransmits_timed_out() sets start_ts from tp->retrans_stamp from TFO payload retransmit hours/days ago, and computes bogus long elapsed time for loss recovery, and suffers ETIMEDOUT early. Fixes: a7abf3cd ("tcp: consider using standard rtx logic in tcp_rcv_fastopen_synack()") CC: stable@vger.kernel.org Co-developed-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
- 17 Jun, 2024 1 commit
-
-
Gavrilov Ilia authored
syzbot reported a memory leak in nr_create() [0]. Commit 409db27e ("netrom: Fix use-after-free of a listening socket.") added sock_hold() to the nr_heartbeat_expiry() function, where a) a socket has a SOCK_DESTROY flag or b) a listening socket has a SOCK_DEAD flag. But in the case "a," when the SOCK_DESTROY flag is set, the file descriptor has already been closed and the nr_release() function has been called. So it makes no sense to hold the reference count because no one will call another nr_destroy_socket() and put it as in the case "b." nr_connect nr_establish_data_link nr_start_heartbeat nr_release switch (nr->state) case NR_STATE_3 nr->state = NR_STATE_2 sock_set_flag(sk, SOCK_DESTROY); nr_rx_frame nr_process_rx_frame switch (nr->state) case NR_STATE_2 nr_state2_machine() nr_disconnect() nr_sk(sk)->state = NR_STATE_0 sock_set_flag(sk, SOCK_DEAD) nr_heartbeat_expiry switch (nr->state) case NR_STATE_0 if (sock_flag(sk, SOCK_DESTROY) || (sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD))) sock_hold() // ( !!! ) nr_destroy_socket() To fix the memory leak, let's call sock_hold() only for a listening socket. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. [0]: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16 Reported-by: syzbot+d327a1f3b12e1e206c16@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16 Fixes: 409db27e ("netrom: Fix use-after-free of a listening socket.") Signed-off-by:
Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru> Signed-off-by:
-
- 15 Jun, 2024 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-06-11 (ice) This series contains updates to ice driver only. En-Wei Wu resolves IRQ collision during suspend. Paul corrects 200Gbps speed being reported as unknown. Wojciech adds retry mechanism when package download fails. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: implement AQ download pkg retry ice: fix 200G link speed message log ice: avoid IRQ collision to fix init failure on ACPI S3 resume ==================== Link: https://lore.kernel.org/r/20240613154514.1948785-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
-EINVAL will interrupt the dump. The correct error to return if we have more data to dump is -EMSGSIZE. Discovered by doing: for i in `seq 80`; do ip link add type veth; done ./cli.py --dbg-small-recv 5300 --spec netdev.yaml --dump dev-get >> /dev/null [...] nl_len = 64 (48) nl_flags = 0x0 nl_type = 19 nl_len = 20 (4) nl_flags = 0x2 nl_type = 3 error: -22 Fixes: d3d854fd ("netdev-genl: create a simple family for netdev stuff") Reviewed-by:Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-06-14 We've added 8 non-merge commits during the last 2 day(s) which contain a total of 9 files changed, 92 insertions(+), 11 deletions(-). The main changes are: 1) Silence a syzkaller splat under CONFIG_DEBUG_NET=y in pskb_pull_reason() triggered via __bpf_try_make_writable(), from Florian Westphal. 2) Fix removal of kfuncs during linking phase which then throws a kernel build warning via resolve_btfids about unresolved symbols, from Tony Ambardar. 3) Fix a UML x86_64 compilation failure from BPF as pcpu_hot symbol is not available on User Mode Linux, from Maciej Żenczykowski. 4) Fix a register corruption in reg_set_min_max triggering an invariant violation in BPF verifier, from Daniel Borkmann. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Harden __bpf_kfunc tag against linker kfunc removal compiler_types.h: Define __retain for __attribute__((__retain__)) bpf: Avoid splat in pskb_pull_reason bpf: fix UML x86_64 compile failure selftests/bpf: Add test coverage for reg_set_min_max handling bpf: Reduce stack consumption in check_stack_write_fixed_off bpf: Fix reg_set_min_max corruption of fake_reg MAINTAINERS: mailmap: Update Stanislav's email address ==================== Link: https://lore.kernel.org/r/20240614203223.26500-1-daniel@iogearbox.netSigned-off-by:
-
- 14 Jun, 2024 8 commits
-
-
Tony Ambardar authored
BPF kfuncs are often not directly referenced and may be inadvertently removed by optimization steps during kernel builds, thus the __bpf_kfunc tag mitigates against this removal by including the __used macro. However, this macro alone does not prevent removal during linking, and may still yield build warnings (e.g. on mips64el): [...] LD vmlinux BTFIDS vmlinux WARN: resolve_btfids: unresolved symbol bpf_verify_pkcs7_signature WARN: resolve_btfids: unresolved symbol bpf_lookup_user_key WARN: resolve_btfids: unresolved symbol bpf_lookup_system_key WARN: resolve_btfids: unresolved symbol bpf_key_put WARN: resolve_btfids: unresolved symbol bpf_iter_task_next WARN: resolve_btfids: unresolved symbol bpf_iter_css_task_new WARN: resolve_btfids: unresolved symbol bpf_get_file_xattr WARN: resolve_btfids: unresolved symbol bpf_ct_insert_entry WARN: resolve_btfids: unresolved symbol bpf_cgroup_release WARN: resolve_btfids: unresolved symbol bpf_cgroup_from_id WARN: resolve_btfids: unresolved symbol bpf_cgroup_acquire WARN: resolve_btfids: unresolved symbol bpf_arena_free_pages NM System.map SORTTAB vmlinux OBJCOPY vmlinux.32 [...] Update the __bpf_kfunc tag to better guard against linker optimization by including the new __retain compiler macro, which fixes the warnings above. Verify the __retain macro with readelf by checking object flags for 'R': $ readelf -Wa kernel/trace/bpf_trace.o Section Headers: [Nr] Name Type Address Off Size ES Flg Lk Inf Al [...] [178] .text.bpf_key_put PROGBITS 00000000 6420 0050 00 AXR 0 0 8 [...] Key to Flags: [...] R (retain), D (mbind), p (processor specific) Fixes: 57e7c169 ("bpf: Add __bpf_kfunc tag for marking kernel functions as kfuncs") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Tested-by:
Jiri Olsa <jolsa@kernel.org> Reviewed-by:
-
Tony Ambardar authored
Some code includes the __used macro to prevent functions and data from being optimized out. This macro implements __attribute__((__used__)), which operates at the compiler and IR-level, and so still allows a linker to remove objects intended to be kept. Compilers supporting __attribute__((__retain__)) can address this gap by setting the flag SHF_GNU_RETAIN on the section of a function/variable, indicating to the linker the object should be retained. This attribute is available since gcc 11, clang 13, and binutils 2.36. Provide a __retain macro implementing __attribute__((__retain__)), whose first user will be the '__bpf_kfunc' tag. [ Additional remark from discussion: Why is CONFIG_LTO_CLANG added here? The __used macro permits garbage collection at section level, so CLANG_LTO_CLANG without CONFIG_LD_DEAD_CODE_DATA_ELIMINATION should not change final section dynamics? The conditional guard was included to ensure consistent behaviour between __retain and other features forcing split sections. In particular, the same guard is used in vmlinux.lds.h to merge split sections where needed. For example, using __retain in LLVM builds without CONFIG_LTO was failing CI tests on kernel-patches/bpf because the kernel didn't boot properly. And in further testing, the kernel had no issues loading BPF kfunc modules with such split sections, so the module (partial) linking scripts were left alone. ] Signed-off-by:
-
Florian Westphal authored
syzkaller builds (CONFIG_DEBUG_NET=y) frequently trigger a debug hint in pskb_may_pull. We'd like to retain this debug check because it might hint at integer overflows and other issues (kernel code should pull headers, not huge value). In bpf case, this splat isn't interesting at all: such (nonsensical) bpf programs are typically generated by a fuzzer anyway. Do what Eric suggested and suppress such warning. For CONFIG_DEBUG_NET=n we don't need the extra check because pskb_may_pull will do the right thing: return an error without the WARN() backtrace. Fixes: 219eee9c ("net: skbuff: add overflow debug check to pull/push helpers") Reported-by: syzbot+0c4150bff9fff3bf023c@syzkaller.appspotmail.com Suggested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== Various fixes: * cfg80211: wext scan * mac80211: monitor regression, scan counted_by, offload * iwlwifi: locking, 6 GHz scan, remain-on-channel * tag 'wireless-2024-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix monitor channel with chanctx emulation wifi: mac80211: Avoid address calculations via out of bounds array indexing wifi: mac80211: Recalc offload when monitor stop wifi: iwlwifi: scan: correctly check if PSC listen period is needed wifi: iwlwifi: mvm: fix ROC version check wifi: iwlwifi: mvm: unlock mvm mutex wifi: cfg80211: wext: add extra SIOCSIWSCAN data check wifi: cfg80211: wext: set ssids=NULL for passive scans ==================== Link: https://lore.kernel.org/r/20240614085710.24103-3-johannes@sipsolutions.netSigned-off-by:
-
Ondrej Mosnacek authored
As the comment in this function says, the code currently just clears the CIPSO part with IPOPT_NOP, rather than removing it completely and trimming the packet. The other cipso_v4_*_delattr() functions, however, do the proper removal and also calipso_skbuff_delattr() makes an effort to remove the CALIPSO options instead of replacing them with padding. Some routers treat IPv4 packets with anything (even NOPs) in the option header as a special case and take them through a slower processing path. Consequently, hardening guides such as STIG recommend to configure such routers to drop packets with non-empty IP option headers [1][2]. Thus, users might expect NetLabel to produce packets with minimal padding (or at least with no padding when no actual options are present). Implement the proper option removal to address this and to be closer to what the peer functions do. [1] https://www.stigviewer.com/stig/juniper_router_rtr/2019-09-27/finding/V-90937 [2] https://www.stigviewer.com/stig/cisco_ios_xe_router_rtr/2021-03-26/finding/V-217001Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Ondrej Mosnacek authored
As evident from the definition of ip_options_get(), the IP option IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet the loop that walks the IP options to determine the total IP options length in cipso_v4_delopt() doesn't take IPOPT_END into account. Fix it by recognizing the IPOPT_END value as the end of actual options. Fixes: 014ab19a ("selinux: Set socket NetLabel based on connection endpoint") Signed-off-by:
-
Johannes Berg authored
After the channel context emulation, there were reports that changing the monitor channel no longer works. This is because those drivers don't have WANT_MONITOR_VIF, so the setting the channel always exits out quickly. Fix this by always allocating the virtual monitor sdata, and simply not telling the driver about it unless it wanted to. This way, we have an interface/sdata to bind the chanctx to, and the emulation can work correctly. Cc: stable@vger.kernel.org Fixes: 0a44dfc0 ("wifi: mac80211: simplify non-chanctx drivers") Reported-and-tested-by:
Savyasaachi Vanga <savyasaachiv@gmail.com> Closes: https://lore.kernel.org/r/chwoymvpzwtbmzryrlitpwmta5j6mtndocxsyqvdyikqu63lon@gfds653hkknl Link: https://msgid.link/20240612122351.b12d4a109dde.I1831a44417faaab92bea1071209abbe4efbe3fba@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Kenton Groombridge authored
req->n_channels must be set before req->channels[] can be used. This patch fixes one of the issues encountered in [1]. [ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4 [ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]' [...] [ 83.964264] Call Trace: [ 83.964267] <TASK> [ 83.964269] dump_stack_lvl+0x3f/0xc0 [ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110 [ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0 [ 83.964281] __ieee80211_start_scan+0x601/0x990 [ 83.964291] nl80211_trigger_scan+0x874/0x980 [ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160 [ 83.964298] genl_rcv_msg+0x240/0x270 [...] [1] https://bugzilla.kernel.org/show_bug.cgi?id=218810Co-authored-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Kees Cook <kees@kernel.org> Signed-off-by:
Kenton Groombridge <concord@gentoo.org> Link: https://msgid.link/20240605152218.236061-1-concord@gentoo.orgSigned-off-by:
-
- 13 Jun, 2024 8 commits
-
-
Aryan Srivastava authored
Setting frag_size to 0 to indicate kmalloc has been deprecated, use slab_build_skb directly. Fixes: ce098da1 ("skbuff: Introduce slab_build_skb()") Signed-off-by:
Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Reviewed-by:
-
Maciej Żenczykowski authored
pcpu_hot (defined in arch/x86) is not available on user mode linux (ARCH=um) Cc: Andrii Nakryiko <andrii@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Fixes: 1ae69210 ("bpf: inline bpf_get_smp_processor_id() helper") Signed-off-by:
Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20240613173146.2524647-1-maze@google.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Add a test case for the jmp32/k fix to ensure selftests have coverage. Before fix: # ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k [...] ./test_progs -t verifier_or_jmp32_k tester_init:PASS:tester_log_buf 0 nsec process_subtest:PASS:obj_open_mem 0 nsec process_subtest:PASS:specs_alloc 0 nsec run_subtest:PASS:obj_open_mem 0 nsec run_subtest:FAIL:unexpected_load_success unexpected success: 0 #492/1 verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:FAIL #492 verifier_or_jmp32_k:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED After fix: # ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k [...] ./test_progs -t verifier_or_jmp32_k #492/1 verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:OK #492 verifier_or_jmp32_k:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20240613115310.25383-3-daniel@iogearbox.netSigned-off-by:
-
Daniel Borkmann authored
The fake_reg moved into env->fake_reg given it consumes a lot of stack space (120 bytes). Migrate the fake_reg in check_stack_write_fixed_off() as well now that we have it. Signed-off-by:
-
Daniel Borkmann authored
Juan reported that after doing some changes to buzzer [0] and implementing a new fuzzing strategy guided by coverage, they noticed the following in one of the probes: [...] 13: (79) r6 = *(u64 *)(r0 +0) ; R0=map_value(ks=4,vs=8) R6_w=scalar() 14: (b7) r0 = 0 ; R0_w=0 15: (b4) w0 = -1 ; R0_w=0xffffffff 16: (74) w0 >>= 1 ; R0_w=0x7fffffff 17: (5c) w6 &= w0 ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff)) 18: (44) w6 |= 2 ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd)) 19: (56) if w6 != 0x7ffffffd goto pc+1 REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0) 19: R6_w=0x7fffffff 20: (95) exit from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: (14) w6 -= 2147483632 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd)) 22: (76) if w6 s>= 0xe goto pc+1 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd)) 23: (95) exit from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: (14) w6 -= 14 ; R6_w=0 [...] What can be seen here is a register invariant violation on line 19. After the binary-or in line 18, the verifier knows that bit 2 is set but knows nothing about the rest of the content which was loaded from a map value, meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in line 19 the verifier analyzes the branch, it splits the register states in reg_set_min_max() into the registers of the true branch (true_reg1, true_reg2) and the registers of the false branch (false_reg1, false_reg2). Since the test is w6 != 0x7ffffffd, the src_reg is a known constant. Internally, the verifier creates a "fake" register initialized as scalar to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now, for line 19, it is mathematically impossible to take the false branch of this program, yet the verifier analyzes it. It is impossible because the second bit of r6 will be set due to the prior or operation and the constant in the condition has that bit unset (hex(fd) == binary(1111 1101). When the verifier first analyzes the false / fall-through branch, it will compute an intersection between the var_off of r6 and of the constant. This is because the verifier creates a "fake" register initialized to the value of the constant. The intersection result later refines both registers in regs_refine_cond_op(): [...] t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off)); reg1->var_off = tnum_with_subreg(reg1->var_off, t); reg2->var_off = tnum_with_subreg(reg2->var_off, t); [...] Since the verifier is analyzing the false branch of the conditional jump, reg1 is equal to false_reg1 and reg2 is equal to false_reg2, i.e. the reg2 is the "fake" register that was meant to hold a constant value. The resulting var_off of the intersection says that both registers now hold a known value of var_off=(0x7fffffff, 0x0) or in other words: this operation manages to make the verifier think that the "constant" value that was passed in the jump operation now holds a different value. Normally this would not be an issue since it should not influence the true branch, however, false_reg2 and true_reg2 are pointers to the same "fake" register. Meaning, the false branch can influence the results of the true branch. In line 24, the verifier assumes R6_w=0, but the actual runtime value in this case is 1. The fix is simply not passing in the same "fake" register location as inputs to reg_set_min_max(), but instead making a copy. Moving the fake_reg into the env also reduces stack consumption by 120 bytes. With this, the verifier successfully rejects invalid accesses from the test program. [0] https://github.com/google/buzzer Fixes: 67420501 ("bpf: generalize reg_set_min_max() to handle non-const register comparisons") Reported-by:
Juan José López Jaimez <jjlopezjaimez@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and netfilter. Slim pickings this time, probably a combination of summer, DevConf.cz, and the end of first half of the year at corporations. Current release - regressions: - Revert "igc: fix a log entry using uninitialized netdev", it traded lack of netdev name in a printk() for a crash Previous releases - regressions: - Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ - geneve: fix incorrectly setting lengths of inner headers in the skb, confusing the drivers and causing mangled packets - sched: initialize noop_qdisc owner to avoid false-positive recursion detection (recursing on CPU 0), which bubbles up to user space as a sendmsg() error, while noop_qdisc should silently drop - netdevsim: fix backwards compatibility in nsim_get_iflink() Previous releases - always broken: - netfilter: ipset: fix race between namespace cleanup and gc in the list:set type" * tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send() af_unix: Read with MSG_PEEK loops if the first unread byte is OOB bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response gve: Clear napi->skb before dev_kfree_skb_any() ionic: fix use after netif_napi_del() Revert "igc: fix a log entry using uninitialized netdev" net: bridge: mst: fix suspicious rcu usage in br_mst_set_state net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state net/ipv6: Fix the RT cache flush via sysctl using a previous delay net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters gve: ignore nonrelevant GSO type bits when processing TSO headers net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP netfilter: Use flowlabel flow key when re-routing mangled packets netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type netfilter: nft_inner: validate mandatory meta and payload tcp: use signed arithmetic in tcp_rtx_probe0_timed_out() mailmap: map Geliang's new email address mptcp: pm: update add_addr counters after connect mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID mptcp: ensure snd_una is properly initialized on connect ... -
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: "Bugfixes: - NFSv4.2: Fix a memory leak in nfs4_set_security_label - NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long. - NFS: Add appropriate memory barriers to the sillyrename code - Propagate readlink errors in nfs_symlink_filler - NFS: don't invalidate dentries on transient errors - NFS: fix unnecessary synchronous writes in random write workloads - NFSv4.1: enforce rootpath check when deciding whether or not to trunk Other: - Change email address for Trond Myklebust due to email server concerns" * tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: add barriers when testing for NFS_FSDATA_BLOCKED SUNRPC: return proper error from gss_wrap_req_priv NFSv4.1 enforce rootpath check in fs_location query NFS: abort nfs_atomic_open_v23 if name is too long. nfs: don't invalidate dentries on transient errors nfs: Avoid flushing many pages with NFS_FILE_SYNC nfs: propagate readlink errors in nfs_symlink_filler MAINTAINERS: Change email address for Trond Myklebust NFSv4: Fix memory leak in nfs4_set_security_label
-
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblockLinus Torvalds authored
Pull memblock fixes from Mike Rapoport: "Fix validation of NUMA coverage. memblock_validate_numa_coverage() was checking for a unset node ID using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was specified by buggy firmware. Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()" * tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node() memblock: make memblock_set_node() also warn about use of MAX_NUMNODES
-
