Pull drm fixes from Dave Airlie:
 "Not much to squeeze into rc1, just two small fixes, one for core gem
 and one for shmem-helpers:

  gem:
   - Annotate WW context in error paths

  shmem-helper:
   - Add missing vunmap in error paths"

* tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drm:
  drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error
  drm/shmem-helper: Add missing vunmap on error

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, bpf, can and netfilter.

  A little larger than usual but it's all fixes, no late features. It's
  large partially because of timing, and partially because of follow ups
  to stuff that got merged a week or so before the merge window and
  wasn't as widely tested. Maybe the Bluetooth fixes are a little
  alarming so we'll address that, but the rest seems okay and not scary.

  Notably we're including a fix for the netfilter Kconfig [1], your WiFi
  warning [2] and a bluetooth fix which should unblock syzbot [3].

  Current release - regressions:

   - Bluetooth:
      - don't try to cancel uninitialized works [3]
      - L2CAP: fix use-after-free caused by l2cap_chan_put

   - tls: rx: fix device offload after recent rework

   - devlink: fix UAF on failed reload and leftover locks in mlxsw

  Current release - new code bugs:

   - netfilter:
      - flowtable: fix incorrect Kconfig dependencies [1]
      - nf_tables: fix crash when nf_trace is enabled

   - bpf:
      - use proper target btf when exporting attach_btf_obj_id
      - arm64: fixes for bpf trampoline support

   - Bluetooth:
      - ISO: unlock on error path in iso_sock_setsockopt()
      - ISO: fix info leak in iso_sock_getsockopt()
      - ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
      - ISO: fix memory corruption on iso_pinfo.base
      - ISO: fix not using the correct QoS
      - hci_conn: fix updating ISO QoS PHY

   - phy: dp83867: fix get nvmem cell fail

  Previous releases - regressions:

   - wifi: cfg80211: fix validating BSS pointers in
     __cfg80211_connect_result [2]

   - atm: bring back zatm uAPI after ATM had been removed

   - properly fix old bug making bonding ARP monitor mode not being able
     to work with software devices with lockless Tx

   - tap: fix null-deref on skb->dev in dev_parse_header_protocol

   - revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
     devices and breaks others

   - netfilter:
      - nf_tables: many fixes rejecting cross-object linking which may
        lead to UAFs
      - nf_tables: fix null deref due to zeroed list head
      - nf_tables: validate variable length element extension

   - bgmac: fix a BUG triggered by wrong bytes_compl

   - bcmgenet: indicate MAC is in charge of PHY PM

  Previous releases - always broken:

   - bpf:
      - fix bad pointer deref in bpf_sys_bpf() injected via test infra
      - disallow non-builtin bpf programs calling the prog_run command
      - don't reinit map value in prealloc_lru_pop
      - fix UAFs during the read of map iterator fd
      - fix invalidity check for values in sk local storage map
      - reject sleepable program for non-resched map iterator

   - mptcp:
      - move subflow cleanup in mptcp_destroy_common()
      - do not queue data on closed subflows

   - virtio_net: fix memory leak inside XDP_TX with mergeable

   - vsock: fix memory leak when multiple threads try to connect()

   - rework sk_user_data sharing to prevent psock leaks

   - geneve: fix TOS inheriting for ipv4

   - tunnels & drivers: do not use RT_TOS for IPv6 flowlabel

   - phy: c45 baset1: do not skip aneg configuration if clock role is
     not specified

   - rose: avoid overflow when /proc displays timer information

   - x25: fix call timeouts in blocking connects

   - can: mcp251x: fix race condition on receive interrupt

   - can: j1939:
      - replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
      - fix memory leak of skbs in j1939_session_destroy()

  Misc:

   - docs: bpf: clarify that many things are not uAPI

   - seg6: initialize induction variable to first valid array index (to
     silence clang vs objtool warning)

   - can: ems_usb: fix clang 14's -Wunaligned-access warning"

* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
  net: atm: bring back zatm uAPI
  dpaa2-eth: trace the allocated address instead of page struct
  net: add missing kdoc for struct genl_multicast_group::flags
  nfp: fix use-after-free in area_cache_get()
  MAINTAINERS: use my korg address for mt7601u
  mlxsw: minimal: Fix deadlock in ports creation
  bonding: fix reference count leak in balance-alb mode
  net: usb: qmi_wwan: Add support for Cinterion MV32
  bpf: Shut up kern_sys_bpf warning.
  net/tls: Use RCU API to access tls_ctx->netdev
  tls: rx: device: don't try to copy too much on detach
  tls: rx: device: bound the frag walk
  net_sched: cls_route: remove from list when handle is 0
  selftests: forwarding: Fix failing tests with old libnet
  net: refactor bpf_sk_reuseport_detach()
  net: fix refcount bug in sk_psock_get (2)
  selftests/bpf: Ensure sleepable program is rejected by hash map iter
  selftests/bpf: Add write tests for sk local storage map iterator
  selftests/bpf: Add tests for reading a dangling map iter fd
  bpf: Only allow sleepable program for resched-able iterator
  ...

Pull more ACPI updates from Rafael Wysocki:
 "These fix up direct references to the fwnode field in struct device
  and extend ACPI device properties support.

  Specifics:

   - Replace direct references to the fwnode field in struct device with
     dev_fwnode() and device_match_fwnode() (Andy Shevchenko)

   - Make the ACPI code handling device properties support properties
     with buffer values (Sakari Ailus)"

* tag 'acpi-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: property: Fix error handling in acpi_init_properties()
  ACPI: VIOT: Do not dereference fwnode in struct device
  ACPI: property: Read buffer properties as integers
  ACPI: property: Add support for parsing buffer property UUID
  ACPI: property: Unify integer value reading functions
  ACPI: property: Switch node property referencing from ifs to a switch
  ACPI: property: Move property ref argument parsing into a new function
  ACPI: property: Use acpi_object_type consistently in property ref parsing
  ACPI: property: Tie data nodes to acpi handles
  ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool

Pull more iomap updates from Darrick Wong:
 "In the past 10 days or so I've not heard any ZOMG STOP style
  complaints about removing ->writepage support from gfs2 or zonefs, so
  here's the pull request removing them (and the underlying fs iomap
  support) from the kernel:

   - Remove iomap_writepage and all callers, since the mm apparently
     never called the zonefs or gfs2 writepage functions"

* tag 'iomap-6.0-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: remove iomap_writepage
  zonefs: remove ->writepage
  gfs2: remove ->writepage
  gfs2: stop using generic_writepages in gfs2_ail1_start_one

Merge tag 'drm-misc-next-fixes-2022-08-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

 * gem: Annotate WW context in error paths
 * shmem-helper: Add missing vunmap in error paths
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YvOLPpufsvOJHiNY@linux-uq9g

Pull ceph updates from Ilya Dryomov:
 "We have a good pile of various fixes and cleanups from Xiubo, Jeff,
  Luis and others, almost exclusively in the filesystem.

  Several patches touch files outside of our normal purview to set the
  stage for bringing in Jeff's long awaited ceph+fscrypt series in the
  near future. All of them have appropriate acks and sat in linux-next
  for a while"

* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
  libceph: clean up ceph_osdc_start_request prototype
  libceph: fix ceph_pagelist_reserve() comment typo
  ceph: remove useless check for the folio
  ceph: don't truncate file in atomic_open
  ceph: make f_bsize always equal to f_frsize
  ceph: flush the dirty caps immediatelly when quota is approaching
  libceph: print fsid and epoch with osd id
  libceph: check pointer before assigned to "c->rules[]"
  ceph: don't get the inline data for new creating files
  ceph: update the auth cap when the async create req is forwarded
  ceph: make change_auth_cap_ses a global symbol
  ceph: fix incorrect old_size length in ceph_mds_request_args
  ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
  ceph: call netfs_subreq_terminated with was_async == false
  ceph: convert to generic_file_llseek
  ceph: fix the incorrect comment for the ceph_mds_caps struct
  ceph: don't leak snap_rwsem in handle_cap_grant
  ceph: prevent a client from exceeding the MDS maximum xattr size
  ceph: choose auth MDS for getxattr with the Xs caps
  ceph: add session already open notify support
  ...

Pull more kvm updates from Paolo Bonzini:

 - Xen timer fixes

 - Documentation formatting fixes

 - Make rseq selftest compatible with glibc-2.35

 - Fix handling of illegal LEA reg, reg

 - Cleanup creation of debugfs entries

 - Fix steal time cache handling bug

 - Fixes for MMIO caching

 - Optimize computation of number of LBRs

 - Fix uninitialized field in guest_maxphyaddr < host_maxphyaddr path

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
  KVM: x86/MMU: properly format KVM_CAP_VM_DISABLE_NX_HUGE_PAGES capability table
  Documentation: KVM: extend KVM_CAP_VM_DISABLE_NX_HUGE_PAGES heading underline
  KVM: VMX: Adjust number of LBR records for PERF_CAPABILITIES at refresh
  KVM: VMX: Use proper type-safe functions for vCPU => LBRs helpers
  KVM: x86: Refresh PMU after writes to MSR_IA32_PERF_CAPABILITIES
  KVM: selftests: Test all possible "invalid" PERF_CAPABILITIES.LBR_FMT vals
  KVM: selftests: Use getcpu() instead of sched_getcpu() in rseq_test
  KVM: selftests: Make rseq compatible with glibc-2.35
  KVM: Actually create debugfs in kvm_create_vm()
  KVM: Pass the name of the VM fd to kvm_create_vm_debugfs()
  KVM: Get an fd before creating the VM
  KVM: Shove vcpu stats_id init into kvm_vcpu_init()
  KVM: Shove vm stats_id init into kvm_create_vm()
  KVM: x86/mmu: Add sanity check that MMIO SPTE mask doesn't overlap gen
  KVM: x86/mmu: rename trace function name for asynchronous page fault
  KVM: x86/xen: Stop Xen timer before changing IRQ
  KVM: x86/xen: Initialize Xen timer only once
  KVM: SVM: Disable SEV-ES support if MMIO caching is disable
  KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks change
  KVM: x86: Tag kvm_mmu_x86_module_init() with __init
  ...

Jiri reports that linux-atm does not build without this header.
Bring it back. It's completely dead code but we can't break
the build for user space :(
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Fixes: 052e1f01 ("net: atm: remove support for ZeitNet ZN122x ATM devices")
Link: https://lore.kernel.org/all/8576aef3-37e4-8bae-bab5-08f82a78efd3@kernel.org/
Link: https://lore.kernel.org/r/20220810164547.484378-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We should trace the allocated address instead of page struct.

Fixes: 27c87486 ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge changes adding support for device properties with buffer values
to the ACPI device properties handling code.

* acpi-properties:
  ACPI: property: Fix error handling in acpi_init_properties()
  ACPI: property: Read buffer properties as integers
  ACPI: property: Add support for parsing buffer property UUID
  ACPI: property: Unify integer value reading functions
  ACPI: property: Switch node property referencing from ifs to a switch
  ACPI: property: Move property ref argument parsing into a new function
  ACPI: property: Use acpi_object_type consistently in property ref parsing
  ACPI: property: Tie data nodes to acpi handles
  ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool

Multicast group flags were added in commit 4d54cc32 ("mptcp: avoid
lock_fast usage in accept path"), but it missed adding the kdoc.

Mention which flags go into that field, and do the same for
op structs.

Link: https://lore.kernel.org/r/20220809232012.403730-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull input updates from Dmitry Torokhov:

 - changes to input core to properly queue synthetic events (such as
   autorepeat) and to release multitouch contacts when an input device
   is inhibited or suspended

 - reworked quirk handling in i8042 driver that consolidates multiple
   DMI tables into one and adds several quirks for TUXEDO line of
   laptops

 - update to mt6779 keypad to better reflect organization of the
   hardware

 - changes to mtk-pmic-keys driver preparing it to handle more variants

 - facelift of adp5588-keys driver

 - improvements to iqs7222 driver

 - adjustments to various DT binding documents for input devices

 - other assorted driver fixes.

* tag 'input-for-v5.20-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
  Input: adc-joystick - fix ordering in adc_joystick_probe()
  dt-bindings: input: ariel-pwrbutton: use spi-peripheral-props.yaml
  Input: deactivate MT slots when inhibiting or suspending devices
  Input: properly queue synthetic events
  dt-bindings: input: iqs7222: Use central 'linux,code' definition
  Input: i8042 - add dritek quirk for Acer Aspire One AO532
  dt-bindings: input: gpio-keys: accept also interrupt-extended
  dt-bindings: input: gpio-keys: reference input.yaml and document properties
  dt-bindings: input: gpio-keys: enforce node names to match all properties
  dt-bindings: input: Convert adc-keys to DT schema
  dt-bindings: input: Centralize 'linux,input-type' definition
  dt-bindings: input: Use common 'linux,keycodes' definition
  dt-bindings: input: Centralize 'linux,code' definition
  dt-bindings: input: Increase maximum keycode value to 0x2ff
  Input: mt6779-keypad - implement row/column selection
  Input: mt6779-keypad - match hardware matrix organization
  Input: i8042 - add additional TUXEDO devices to i8042 quirk tables
  Input: goodix - switch use of acpi_gpio_get_*_resource() APIs
  Input: i8042 - add TUXEDO devices to i8042 quirk tables
  Input: i8042 - add debug output for quirks
  ...

area_cache_get() is used to distribute cache->area and set cache->id,
 and if cache->id is not 0 and cache->area->kref refcount is 0, it will
 release the cache->area by nfp_cpp_area_release(). area_cache_get()
 set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire().

But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is
 is already set but the refcount is not increased as expected. At this
 time, calling the nfp_cpp_area_release() will cause use-after-free.

To avoid the use-after-free, set cache->id after area_init() and
 nfp_cpp_area_acquire() complete successfully.

Note: This vulnerability is triggerable by providing emulated device
 equipped with specified configuration.

 BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
  Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1

 Call Trace:
  <TASK>
 nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884)

 Allocated by task 1:
 nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303)
 nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802)
 nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230)
 nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215)
 nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744)

 Freed by task 1:
 kfree (mm/slub.c:4562)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873)
 nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973)
 nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48)
Signed-off-by: Jialiang Wang <wangjialiang0806@163.com>
Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change my address for mt7601u to the main one.

Link: https://lore.kernel.org/r/20220809233843.408004-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Drop devl_lock() / devl_unlock() from ports creation and removal flows
since the devlink instance lock is now taken by mlxsw_core.

Fixes: 72a4c8c9 ("mlxsw: convert driver to use unlocked devlink API during init/fini")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/f4afce5ab0318617f3866b85274be52542d59b32.1660211614.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit d5410ac7 ("net:bonding:support balance-alb interface
with vlan to bridge") introduced a reference count leak by not releasing
the reference acquired by ip_dev_find().  Remedy this by insuring the
reference is released.

Fixes: d5410ac7 ("net:bonding:support balance-alb interface with vlan to bridge")
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/26758.1660194413@famineSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 258fafcd.

The clang -Wformat warning is terminally broken, and the clang people
can't seem to get their act together.

This test program causes a warning with clang:

	#include <stdio.h>

	int main(int argc, char **argv)
	{
		printf("%hhu\n", 'a');
	}

resulting in

  t.c:5:19: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat]
          printf("%hhu\n", 'a');
                  ~~~~     ^~~
                  %d

and apparently clang people consider that a feature, because they don't
want to face the reality of how either C character constants, C
arithmetic, and C varargs functions work.

The rest of the world just shakes their head at that kind of
incompetence, and turns off -Wformat for clang again.

And no, the "you should use a pointless cast to shut this up" is not a
valid answer.  That warning should not exist in the first place, or at
least be optinal with some "-Wformat-me-harder" kind of option.

[ Admittedly, there's also very little reason to *ever* use '%hh[ud]' in
  C, but what little reason there is is entirely about 'I want to see
  only the low 8 bits of the argument'. So I would suggest nobody ever
  use that format in the first place, but if they do, the clang
  behavious is simply always wrong. Because '%hhu' takes an 'int'. It's
  that simple. ]
Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are 2 models for MV32 serials. MV32-W-A is designed
based on Qualcomm SDX62 chip, and MV32-W-B is designed based
on Qualcomm SDX65 chip. So we use 2 different PID to separate it.

Test evidence as below:
T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f3 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F3 USB Mobile Broadband
S:  SerialNumber=d7b4be8d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f4 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F4 USB Mobile Broadband
S:  SerialNumber=d095087d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220810014521.9383-1-slark_xiao@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull in bpf to silence a false positive warning.

* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Shut up kern_sys_bpf warning.

Link: https://lore.kernel.org/r/CAADnVQK589CZN1Q9w8huJqkEyEed+ZMTWqcpA1Rm2CjN3a4XoQ@mail.gmail.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Shut up this warning:
kernel/bpf/syscall.c:5089:5: warning: no previous prototype for function 'kern_sys_bpf' [-Wmissing-prototypes]
int kern_sys_bpf(int cmd, union bpf_attr *attr, unsigned int size)
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

There is unexpected warning on KVM_CAP_VM_DISABLE_NX_HUGE_PAGES capability
table, which cause the table to be rendered as paragraph text instead.

The warning is due to missing colon at capability name and returns keyword,
as well as improper alignment on multi-line returns field.

Fix the warning by adding missing colons and aligning the field.

Link: https://lore.kernel.org/lkml/20220627181937.3be67263@canb.auug.org.au/
Fixes: 084cc29f ("KVM: x86/MMU: Allow NX huge pages to be disabled on a per-vm basis")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Matlack <dmatlack@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-next@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Message-Id: <20220627095151.19339-3-bagasdotme@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Extend heading underline for KVM_CAP_VM_DISABLE_NX_HUGE_PAGE to match
the heading text length.

Link: https://lore.kernel.org/lkml/20220627181937.3be67263@canb.auug.org.au/
Fixes: 084cc29f ("KVM: x86/MMU: Allow NX huge pages to be disabled on a per-vm basis")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Matlack <dmatlack@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-next@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Message-Id: <20220627095151.19339-2-bagasdotme@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Currently, tls_device_down synchronizes with tls_device_resync_rx using
RCU, however, the pointer to netdev is stored using WRITE_ONCE and
loaded using READ_ONCE.

Although such approach is technically correct (rcu_dereference is
essentially a READ_ONCE, and rcu_assign_pointer uses WRITE_ONCE to store
NULL), using special RCU helpers for pointers is more valid, as it
includes additional checks and might change the implementation
transparently to the callers.

Mark the netdev pointer as __rcu and use the correct RCU helpers to
access it. For non-concurrent access pass the right conditions that
guarantee safe access (locks taken, refcount value). Also use the
correct helper in mlx5e, where even READ_ONCE was missing.

The transition to RCU exposes existing issues, fixed by this commit:

1. bond_tls_device_xmit could read netdev twice, and it could become
NULL the second time, after the NULL check passed.

2. Drivers shouldn't stop processing the last packet if tls_device_down
just set netdev to NULL, before tls_dev_del was called. This prevents a
possible packet drop when transitioning to the fallback software mode.

Fixes: 89df6a81 ("net/bonding: Implement TLS TX device offload")
Fixes: c55dcdd4 ("net/tls: Fix use-after-free after the TLS device goes down and up")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/r/20220810081602.1435800-1-maximmi@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Another device offload bug, we use the length of the output
skb as an indication of how much data to copy. But that skb
is sized to offset + record length, and we start from offset.
So we end up double-counting the offset which leads to
skb_copy_bits() returning -EFAULT.
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Tested-by: Ran Rozenstein <ranro@nvidia.com>
Link: https://lore.kernel.org/r/20220809175544.354343-2-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We can't do skb_walk_frags() on the input skbs, because
the input skbs is really just a pointer to the tcp read
queue. We need to bound the "is decrypted" check by the
amount of data in the message.

Note that the walk in tls_device_reencrypt() is after a
CoW so the skb there is safe to walk. Actually in the
current implementation it can't have frags at all, but
whatever, maybe one day it will.
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Tested-by: Ran Rozenstein <ranro@nvidia.com>
Link: https://lore.kernel.org/r/20220809175544.354343-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When a route filter is replaced and the old filter has a 0 handle, the old
one won't be removed from the hashtable, while it will still be freed.

The test was there since before commit 1109c005 ("net: sched: RCU
cls_route"), when a new filter was not allocated when there was an old one.
The old filter was reused and the reinserting would only be necessary if an
old filter was replaced. That was still wrong for the same case where the
old handle was 0.

Remove the old filter from the list independently from its handle value.

This fixes CVE-2022-2588, also reported as ZDI-CAN-17440.
Reported-by: Zhenpeng Lin <zplin@u.northwestern.edu>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Kamal Mostafa <kamal@canonical.com>
Cc: <stable@vger.kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220809170518.164662-1-cascardo@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The custom multipath hash tests use mausezahn in order to test how
changes in various packet fields affect the packet distribution across
the available nexthops.

The tool uses the libnet library for various low-level packet
construction and injection. The library started using the
"SO_BINDTODEVICE" socket option for IPv6 sockets in version 1.1.6 and
for IPv4 sockets in version 1.2.

When the option is not set, packets are not routed according to the
table associated with the VRF master device and tests fail.

Fix this by prefixing the command with "ip vrf exec", which will cause
the route lookup to occur in the VRF routing table. This makes the tests
pass regardless of the libnet library version.

Fixes: 511e8db5 ("selftests: forwarding: Add test for custom multipath hash")
Fixes: 185b0c19 ("selftests: forwarding: Add test for custom multipath hash with IPv4 GRE")
Fixes: b7715acb ("selftests: forwarding: Add test for custom multipath hash with IPv6 GRE")
Reported-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://lore.kernel.org/r/20220809113320.751413-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
bpf 2022-08-10

We've added 23 non-merge commits during the last 7 day(s) which contain
a total of 19 files changed, 424 insertions(+), 35 deletions(-).

The main changes are:

1) Several fixes for BPF map iterator such as UAFs along with selftests, from Hou Tao.

2) Fix BPF syscall program's {copy,strncpy}_from_bpfptr() to not fault, from Jinghao Jia.

3) Reject BPF syscall programs calling BPF_PROG_RUN, from Alexei Starovoitov and YiFei Zhu.

4) Fix attach_btf_obj_id info to pick proper target BTF, from Stanislav Fomichev.

5) BPF design Q/A doc update to clarify what is not stable ABI, from Paul E. McKenney.

6) Fix BPF map's prealloc_lru_pop to not reinitialize, from Kumar Kartikeya Dwivedi.

7) Fix bpf_trampoline_put to avoid leaking ftrace hash, from Jiri Olsa.

8) Fix arm64 JIT to address sparse errors around BPF trampoline, from Xu Kuohai.

9) Fix arm64 JIT to use kvcalloc instead of kcalloc for internal program address
   offset buffer, from Aijun Sun.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
  selftests/bpf: Ensure sleepable program is rejected by hash map iter
  selftests/bpf: Add write tests for sk local storage map iterator
  selftests/bpf: Add tests for reading a dangling map iter fd
  bpf: Only allow sleepable program for resched-able iterator
  bpf: Check the validity of max_rdwr_access for sock local storage map iterator
  bpf: Acquire map uref in .init_seq_private for sock{map,hash} iterator
  bpf: Acquire map uref in .init_seq_private for sock local storage map iterator
  bpf: Acquire map uref in .init_seq_private for hash map iterator
  bpf: Acquire map uref in .init_seq_private for array map iterator
  bpf: Disallow bpf programs call prog_run command.
  bpf, arm64: Fix bpf trampoline instruction endianness
  selftests/bpf: Add test for prealloc_lru_pop bug
  bpf: Don't reinit map value in prealloc_lru_pop
  bpf: Allow calling bpf_prog_test kfuncs in tracing programs
  bpf, arm64: Allocate program buffer using kvcalloc instead of kcalloc
  selftests/bpf: Excercise bpf_obj_get_info_by_fd for bpf2bpf
  bpf: Use proper target btf when exporting attach_btf_obj_id
  mptcp, btf: Add struct mptcp_sock definition when CONFIG_MPTCP is disabled
  bpf: Cleanup ftrace hash in bpf_trampoline_put
  BPF: Fix potential bad pointer dereference in bpf_sys_bpf()
  ...
====================

Link: https://lore.kernel.org/r/20220810190624.10748-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Hawkins Jiawei says:

====================
net: enhancements to sk_user_data field

This patchset fixes refcount bug by adding SK_USER_DATA_PSOCK flag bit in
sk_user_data field. The bug cause following info:

WARNING: CPU: 1 PID: 3605 at lib/refcount.c:19 refcount_warn_saturate+0xf4/0x1e0 lib/refcount.c:19
Modules linked in:
CPU: 1 PID: 3605 Comm: syz-executor208 Not tainted 5.18.0-syzkaller-03023-g7e062cda #0
 <TASK>
 __refcount_add_not_zero include/linux/refcount.h:163 [inline]
 __refcount_inc_not_zero include/linux/refcount.h:227 [inline]
 refcount_inc_not_zero include/linux/refcount.h:245 [inline]
 sk_psock_get+0x3bc/0x410 include/linux/skmsg.h:439
 tls_data_ready+0x6d/0x1b0 net/tls/tls_sw.c:2091
 tcp_data_ready+0x106/0x520 net/ipv4/tcp_input.c:4983
 tcp_data_queue+0x25f2/0x4c90 net/ipv4/tcp_input.c:5057
 tcp_rcv_state_process+0x1774/0x4e80 net/ipv4/tcp_input.c:6659
 tcp_v4_do_rcv+0x339/0x980 net/ipv4/tcp_ipv4.c:1682
 sk_backlog_rcv include/net/sock.h:1061 [inline]
 __release_sock+0x134/0x3b0 net/core/sock.c:2849
 release_sock+0x54/0x1b0 net/core/sock.c:3404
 inet_shutdown+0x1e0/0x430 net/ipv4/af_inet.c:909
 __sys_shutdown_sock net/socket.c:2331 [inline]
 __sys_shutdown_sock net/socket.c:2325 [inline]
 __sys_shutdown+0xf1/0x1b0 net/socket.c:2343
 __do_sys_shutdown net/socket.c:2351 [inline]
 __se_sys_shutdown net/socket.c:2349 [inline]
 __x64_sys_shutdown+0x50/0x70 net/socket.c:2349
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
 </TASK>

To improve code maintainability, this patchset refactors sk_user_data
flags code to be more generic.
====================

Link: https://lore.kernel.org/r/cover.1659676823.git.yin31149@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Refactor sk_user_data dereference using more generic function
__rcu_dereference_sk_user_data_with_flags(), which improve its
maintainability
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Syzkaller reports refcount bug as follows:
------------[ cut here ]------------
refcount_t: saturated; leaking memory.
WARNING: CPU: 1 PID: 3605 at lib/refcount.c:19 refcount_warn_saturate+0xf4/0x1e0 lib/refcount.c:19
Modules linked in:
CPU: 1 PID: 3605 Comm: syz-executor208 Not tainted 5.18.0-syzkaller-03023-g7e062cda #0
 <TASK>
 __refcount_add_not_zero include/linux/refcount.h:163 [inline]
 __refcount_inc_not_zero include/linux/refcount.h:227 [inline]
 refcount_inc_not_zero include/linux/refcount.h:245 [inline]
 sk_psock_get+0x3bc/0x410 include/linux/skmsg.h:439
 tls_data_ready+0x6d/0x1b0 net/tls/tls_sw.c:2091
 tcp_data_ready+0x106/0x520 net/ipv4/tcp_input.c:4983
 tcp_data_queue+0x25f2/0x4c90 net/ipv4/tcp_input.c:5057
 tcp_rcv_state_process+0x1774/0x4e80 net/ipv4/tcp_input.c:6659
 tcp_v4_do_rcv+0x339/0x980 net/ipv4/tcp_ipv4.c:1682
 sk_backlog_rcv include/net/sock.h:1061 [inline]
 __release_sock+0x134/0x3b0 net/core/sock.c:2849
 release_sock+0x54/0x1b0 net/core/sock.c:3404
 inet_shutdown+0x1e0/0x430 net/ipv4/af_inet.c:909
 __sys_shutdown_sock net/socket.c:2331 [inline]
 __sys_shutdown_sock net/socket.c:2325 [inline]
 __sys_shutdown+0xf1/0x1b0 net/socket.c:2343
 __do_sys_shutdown net/socket.c:2351 [inline]
 __se_sys_shutdown net/socket.c:2349 [inline]
 __x64_sys_shutdown+0x50/0x70 net/socket.c:2349
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
 </TASK>

During SMC fallback process in connect syscall, kernel will
replaces TCP with SMC. In order to forward wakeup
smc socket waitqueue after fallback, kernel will sets
clcsk->sk_user_data to origin smc socket in
smc_fback_replace_callbacks().

Later, in shutdown syscall, kernel will calls
sk_psock_get(), which treats the clcsk->sk_user_data
as psock type, triggering the refcnt warning.

So, the root cause is that smc and psock, both will use
sk_user_data field. So they will mismatch this field
easily.

This patch solves it by using another bit(defined as
SK_USER_DATA_PSOCK) in PTRMASK, to mark whether
sk_user_data points to a psock object or not.
This patch depends on a PTRMASK introduced in commit f1ff5ce2
("net, sk_msg: Clear sk_user_data pointer on clone if tagged").

For there will possibly be more flags in the sk_user_data field,
this patch also refactor sk_user_data flags code to be more generic
to improve its maintainability.

Reported-and-tested-by: syzbot+5f26f85569bd179c18ce@syzkaller.appspotmail.com
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Users of GNU ld (BFD) from binutils 2.39+ will observe multiple
instances of a new warning when linking kernels in the form:

  ld: warning: arch/x86/boot/pmjump.o: missing .note.GNU-stack section implies executable stack
  ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
  ld: warning: arch/x86/boot/compressed/vmlinux has a LOAD segment with RWX permissions

Generally, we would like to avoid the stack being executable.  Because
there could be a need for the stack to be executable, assembler sources
have to opt-in to this security feature via explicit creation of the
.note.GNU-stack feature (which compilers create by default) or command
line flag --noexecstack.  Or we can simply tell the linker the
production of such sections is irrelevant and to link the stack as
--noexecstack.

LLVM's LLD linker defaults to -z noexecstack, so this flag isn't
strictly necessary when linking with LLD, only BFD, but it doesn't hurt
to be explicit here for all linkers IMO.  --no-warn-rwx-segments is
currently BFD specific and only available in the current latest release,
so it's wrapped in an ld-option check.

While the kernel makes extensive usage of ELF sections, it doesn't use
permissions from ELF segments.

Link: https://lore.kernel.org/linux-block/3af4127a-f453-4cf7-f133-a181cce06f73@kernel.dk/
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Link: https://github.com/llvm/llvm-project/issues/57009Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Users of GNU ld (BFD) from binutils 2.39+ will observe multiple
instances of a new warning when linking kernels in the form:

  ld: warning: vmlinux: missing .note.GNU-stack section implies executable stack
  ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
  ld: warning: vmlinux has a LOAD segment with RWX permissions

Generally, we would like to avoid the stack being executable.  Because
there could be a need for the stack to be executable, assembler sources
have to opt-in to this security feature via explicit creation of the
.note.GNU-stack feature (which compilers create by default) or command
line flag --noexecstack.  Or we can simply tell the linker the
production of such sections is irrelevant and to link the stack as
--noexecstack.

LLVM's LLD linker defaults to -z noexecstack, so this flag isn't
strictly necessary when linking with LLD, only BFD, but it doesn't hurt
to be explicit here for all linkers IMO.  --no-warn-rwx-segments is
currently BFD specific and only available in the current latest release,
so it's wrapped in an ld-option check.

While the kernel makes extensive usage of ELF sections, it doesn't use
permissions from ELF segments.

Link: https://lore.kernel.org/linux-block/3af4127a-f453-4cf7-f133-a181cce06f73@kernel.dk/
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Link: https://github.com/llvm/llvm-project/issues/57009Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It turns out that gcc-12.1 has some nasty problems with register
allocation on a 32-bit x86 build for the 64-bit values used in the
generic blake2b implementation, where the pattern of 64-bit rotates and
xor operations ends up making gcc generate horrible code.

As a result it ends up with a ridiculously large stack frame for all the
spills it generates, resulting in the following build problem:

    crypto/blake2b_generic.c: In function ‘blake2b_compress_one_generic’:
    crypto/blake2b_generic.c:109:1: error: the frame size of 2640 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

on the same test-case, clang ends up generating a stack frame that is
just 296 bytes (and older gcc versions generate a slightly bigger one at
428 bytes - still nowhere near that almost 3kB monster stack frame of
gcc-12.1).

The issue is fixed both in mainline and the GCC 12 release branch [1],
but current release compilers end up failing the i386 allmodconfig build
due to this issue.

Disable the warning for now by simply raising the frame size for this
one file, just to keep this issue from having people turn off WERROR.

Link: https://lore.kernel.org/all/CAHk-=wjxqgeG2op+=W9sqgsWqCYnavC+SRfVyopu9-31S6xw+Q@mail.gmail.com/
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105930 [1]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - pNFS/flexfiles: Fix infinite looping when the RDMA connection
     errors out

  Bugfixes:
   - NFS: fix port value parsing
   - SUNRPC: Reinitialise the backchannel request buffers before reuse
   - SUNRPC: fix expiry of auth creds
   - NFSv4: Fix races in the legacy idmapper upcall
   - NFS: O_DIRECT fixes from Jeff Layton
   - NFSv4.1: Fix OP_SEQUENCE error handling
   - SUNRPC: Fix an RPC/RDMA performance regression
   - NFS: Fix case insensitive renames
   - NFSv4/pnfs: Fix a use-after-free bug in open
   - NFSv4.1: RECLAIM_COMPLETE must handle EACCES

  Features:
   - NFSv4.1: session trunking enhancements
   - NFSv4.2: READ_PLUS performance optimisations
   - NFS: relax the rules for rsize/wsize mount options
   - NFS: don't unhash dentry during unlink/rename
   - SUNRPC: Fail faster on bad verifier
   - NFS/SUNRPC: Various tracing improvements"

* tag 'nfs-for-5.20-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (46 commits)
  NFS: Improve readpage/writepage tracing
  NFS: Improve O_DIRECT tracing
  NFS: Improve write error tracing
  NFS: don't unhash dentry during unlink/rename
  NFSv4/pnfs: Fix a use-after-free bug in open
  NFS: nfs_async_write_reschedule_io must not recurse into the writeback code
  SUNRPC: Don't reuse bvec on retransmission of the request
  SUNRPC: Reinitialise the backchannel request buffers before reuse
  NFSv4.1: RECLAIM_COMPLETE must handle EACCES
  NFSv4.1 probe offline transports for trunking on session creation
  SUNRPC create a function that probes only offline transports
  SUNRPC export xprt_iter_rewind function
  SUNRPC restructure rpc_clnt_setup_test_and_add_xprt
  NFSv4.1 remove xprt from xprt_switch if session trunking test fails
  SUNRPC create an rpc function that allows xprt removal from rpc_clnt
  SUNRPC enable back offline transports in trunking discovery
  SUNRPC create an iterator to list only OFFLINE xprts
  NFSv4.1 offline trunkable transports on DESTROY_SESSION
  SUNRPC add function to offline remove trunkable transports
  SUNRPC expose functions for offline remote xprt functionality
  ...

Now that the PMU is refreshed when MSR_IA32_PERF_CAPABILITIES is written
by host userspace, zero out the number of LBR records for a vCPU during
PMU refresh if PMU_CAP_LBR_FMT is not set in PERF_CAPABILITIES instead of
handling the check at run-time.

guest_cpuid_has() is expensive due to the linear search of guest CPUID
entries, intel_pmu_lbr_is_enabled() is checked on every VM-Enter, _and_
simply enumerating the same "Model" as the host causes KVM to set the
number of LBR records to a non-zero value.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220727233424.2968356-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Turn vcpu_to_lbr_desc() and vcpu_to_lbr_records() into functions in order
to provide type safety, to document exactly what they return, and to
allow consuming the helpers in vmx.h.  Move the definitions as necessary
(the macros "reference" to_vmx() before its definition).

No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220727233424.2968356-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Refresh the PMU if userspace modifies MSR_IA32_PERF_CAPABILITIES.  KVM
consumes the vCPU's PERF_CAPABILITIES when enumerating PEBS support, but
relies on CPUID updates to refresh the PMU.  I.e. KVM will do the wrong
thing if userspace stuffs PERF_CAPABILITIES _after_ setting guest CPUID.

Opportunistically fix a curly-brace indentation.

Fixes: c59a1f10 ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Cc: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220727233424.2968356-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Test all possible input values to verify that KVM rejects all values
except the exact host value.  Due to the LBR format affecting the core
functionality of LBRs, KVM can't emulate "other" formats, so even though
there are a variety of legal values, KVM should reject anything but an
exact host match.
Suggested-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

sched_getcpu() is glibc dependent and it can simply return the CPU
ID from the registered rseq information, as Florian Weimer pointed.
In this case, it's pointless to compare the return value from
sched_getcpu() and that fetched from the registered rseq information.

Fix the issue by replacing sched_getcpu() with getcpu(), as Florian
suggested. The comments are modified accordingly by replacing
"sched_getcpu()" with "getcpu()".
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20220810104114.6838-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>