"PORT_ICOM" is not defined.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The new icom.o isn't in drivers/serial/Makefile.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixup after mid-air collision between Christoph adding
time_interpolator.mask, and me removing a static time_interpolator struct
from hpet.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Sascha Hauer

Here is an updated version of the patch:

- updated the patch according to Russell's comments
- added proper sysrq handling
- update rx counter

Sascha Hauer

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

Add missing RTCCON definitions

Signed-off-by: Ben Dooks 

Signed-off-by: Russell King

Patch from Marc Singer

As requested, this patch removes the
include/asm-arm/arch-lh7a40x/serial.h header.

Patch from Sascha Hauser

Update H720x for system timer changes.

Convert all platform serial tables to use a serial8250 platform device
rather than declaring a static table in
include/asm-arm/arch-*/serial.h.  This change integrates patches from
Sascha Hauser to update H720x serial support, and Tony Lindgren to
update OMAP serial support.

The PC110 touchpad driver used to just assume that the hardware
exists, even though in fact the hw is extremely rare indeed, and
just requesting all the resources might stomp on some _other_
hardware.

Try to minimize the damage by realizing that the touchpad hw only
exists on old ISA-only hardware, and if we have found a PCI device,
we should not try to load the touchpad driver.

Verified to fix things for Andries Brouwer. 

We should not claim to have filled in the ring_pages[] array
until we actually _do_ fill it in. It will confuse the code
that frees the structure if we claim there are pages there
that don't exist.

Noted by Darrick Wong.

Yes, they might be useful somewhere else too, but the EFI
discovery code is so fragile that it's not worth the bother.

EFI people informed.

I've got a Sony CDU33A drive with COR334 controller.  The Linux cdu31a
driver was not updated for 2.6 kernel so it does not work.

Here are patches that try to make the driver working with 2.6
kernel:
  - fix the timeout values in header file
  - Make the driver work in 2.6.X
  - Added workaround to fix hard lockups on eject
  - Fixed door locking problem after mounting empty drive
  - Set double-speed drives to double speed by default
  - Removed all readahead things - not needed anymore

It does work on my system. I also know that it's still broken - it uses 
cli(), MODULE_PARM and it's also not very fast (I _never_ reached full
300KB/s with it, but I know that it's possible in Windows) and probably 
many other things (I'm new to Linux kernel) - so I'm waiting for comments.

They happen with "bk cset -x" - it only undoes the data
changes, not the metadata updates.

For some as-yet unclear reason, it seems to break legacy
32-bit apps on x86-64.

Cset exclude: ak@suse.de[torvalds]|ChangeSet|20041102230307|11901

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

XFER_xxx is not necessarily "legacy IDE 'stuff'"

This is todays BK on a x86:

  CC [M]  drivers/usb/storage/freecom.o
In file included from include/linux/hdreg.h:4,
                 from drivers/usb/storage/freecom.c:32:
include/linux/ata.h:197: error: parse error before "u32"
...
and so on for tens of lines.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

I'm not setting the rover pointer at all.  Here's a patch to
fix that.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a mirred action is created it takes two references to the
device (dev_get_by_index + dev_hold), but only drops one when
it gets destroyed. It also leaks a reference when a mirred action
is replaced.
Signed-off-by: Patrick McHardy <kaber@trash.ne>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch gets rid of an unused global counter in neighbour.c.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the return codes from sendmsg/recvmsg when a signal happens.
Instead of always returning ERESTARTSYS (which confuses X11 rather badly) it
should return EINTR for non-blocking operations.
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a missing _bh in the 23 August locking update. 
Without this any attempt to read from /proc/net/decnet_cache causes a
'scheduling while atomic' crash.
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes broken packets, noticed by Matthias Andree <matthias.andree@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moxa is short the final cleanup from the tty changes so has extra wakeup
calls that can go

into ppc970.osdl.org:/home/torvalds/v2.6/linux

From: Alan Cox <alan@lxorguk.ukuu.org.uk>
(some changes by me - bart)

The current driver looks at fields before it is safe to, we move the
mod15rm bug handler to be a fixup and this ensures the probe has been
completed before we use the ident data.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Alan Cox <alan@lxorguk.ukuu.org.uk>
(some changes by me - bart)

We add probe_hwif_init_with_fixup (seperate naming as requested by
Bartlomiej). This runs a fixup on present interfaces before attaching
the drives. In order to be useful we need also an _with_fixup version
of ide_register_hw function. 

The sometimes troublesome undecoded slave detector is moved to its own
function and exported so that ide-cs and the upcoming delkin_cb can both
use it (along with any arch specific cf/pcmcia drivers I don't know
about). The non-relevant checks for this scenario are removed.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Chris Wedgwood <cw@f00f.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>