Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... and switch of the obvious get_sb_bdev() users to ->mount()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

eventual replacement for ->get_sb() - does *not* get vfsmount,
return ERR_PTR(error) or root of subtree to be mounted.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

nameidata_to_filp() drops nd->path or transfers it to opened
file.  In the former case it's a Bad Idea(tm) to do mnt_drop_write()
on nd->path.mnt, since we might race with umount and vfsmount in
question might be gone already.

Fix: don't drop it, then...  IOW, have nameidata_to_filp() grab nd->path
in case it transfers it to file and do path_drop() in callers.  After
they are through with accessing nd->path...
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge branch 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
  and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm

* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: register xen pci notifier
  xen: initialize cpu masks for pv guests in xen_smp_init
  xen: add a missing #include to arch/x86/pci/xen.c
  xen: mask the MTRR feature from the cpuid
  xen: make hvc_xen console work for dom0.
  xen: add the direct mapping area for ISA bus access
  xen: Initialize xenbus for dom0.
  xen: use vcpu_ops to setup cpu masks
  xen: map a dummy page for local apic and ioapic in xen_set_fixmap
  xen: remap MSIs into pirqs when running as initial domain
  xen: remap GSIs as pirqs when running as initial domain
  xen: introduce XEN_DOM0 as a silent option
  xen: map MSIs into pirqs
  xen: support GSI -> pirq remapping in PV on HVM guests
  xen: add xen hvm acpi_register_gsi variant
  acpi: use indirect call to register gsi in different modes
  xen: implement xen_hvm_register_pirq
  xen: get the maximum number of pirqs from xen
  xen: support pirq != irq

* 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits)
  X86/PCI: Remove the dependency on isapnp_disable.
  xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
  MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.
  x86: xen: Sanitse irq handling (part two)
  swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
  MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.
  xen/pci: Request ACS when Xen-SWIOTLB is activated.
  xen-pcifront: Xen PCI frontend driver.
  xenbus: prevent warnings on unhandled enumeration values
  xenbus: Xen paravirtualised PCI hotplug support.
  xen/x86/PCI: Add support for the Xen PCI subsystem
  x86: Introduce x86_msi_ops
  msi: Introduce default_[teardown|setup]_msi_irqs with fallback.
  x86/PCI: Export pci_walk_bus function.
  x86/PCI: make sure _PAGE_IOMAP it set on pci mappings
  x86/PCI: Clean up pci_cache_line_size
  xen: fix shared irq device passthrough
  xen: Provide a variant of xen_poll_irq with timeout.
  xen: Find an unbound irq number in reverse order (high to low).
  xen: statically initialize cpu_evtchn_mask_p
  ...

Fix up trivial conflicts in drivers/pci/Makefile

* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  scripts/package: don't break if %{_smp_mflags} isn't set
  kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (39 commits)
  Revert "namespace: add source file location exceptions"
  Coccinelle: Add contextual message
  Coccinelle: Fix documentation
  Coccinelle: Find doubled arguments to boolean or bit operators.
  Coccinelle: Find nested lock+irqsave functions that use the same flags variables.
  namespace: add source file location exceptions
  scripts/extract-ikconfig: add support for bzip2, lzma and lzo
  kbuild: check return value of asprintf()
  scripts/namespace.pl: improve to get more correct results
  scripts/namespace.pl: some bug fixes
  scripts/namespace.pl: update file exclusion list
  scripts/namespace.pl: fix wrong source path
  Coccinelle: Use the -no_show_diff option for org and report mode
  Coccinelle: Add a new mode named 'chain'
  Coccinelle: Use new comment format to explain kfree.cocci
  Coccinelle: Improve user information with a new kind of comment
  Coccinelle: Update documentation
  MAINTAINERS: Coccinelle: Update email address
  Documentation/kbuild: modules.txt cleanup
  Documentation/kbuild: major edit of modules.txt sections 5-8
  ...

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits)
  kbuild: convert `arch/tile' to the kconfig mainmenu upgrade
  README: cite nconfig
  Revert "kconfig: Temporarily disable dependency warnings"
  kconfig: Use PATH_MAX instead of 128 for path buffer sizes.
  kconfig: Fix realloc usage()
  kconfig: Propagate const
  kconfig: Don't go out from read config loop when you read new symbol
  kconfig: fix menuconfig on debian lenny
  kbuild: migrate all arch to the kconfig mainmenu upgrade
  kconfig: expand file names
  kconfig: use the file's name of sourced file
  kconfig: constify file name
  kconfig: don't emit warning upon rootmenu's prompt redefinition
  kconfig: replace KERNELVERSION usage by the mainmenu's prompt
  kconfig: delay gconf window initialization
  kconfig: expand by default the rootmenu's prompt
  kconfig: add a symbol string expansion helper
  kconfig: regen parser
  kconfig: implement the `mainmenu' directive
  kconfig: allow PACKAGE to be defined on the compiler's command-line
  ...

Fix up trivial conflict in arch/mn10300/Kconfig

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (73 commits)
  power: Revert "power_supply: Mark twl4030_charger as broken"
  mfd: Fix a memory leak when unload mc13xxx-core module
  mfd: Fix resource reclaim for max8998
  mfd: Remove unneeded ret value checking for max8998 register updates
  mfd: Add free max8998->ono irq in max8998_irq_exit()
  mfd: Fix resource reclaim in pcf50633_remove()
  omap4: pandaboard: fix up mmc card detect logic
  mfd: Fix ezx_pcap_probe error path
  mfd: Fix off-by-one value range checking for tps6507x
  mfd: Remove __devinitdata from tc6393xb_mmc_resources
  mfd: Add WM831x SPI support
  mfd: Factor out WM831x I2C I/O from the core driver
  mfd: Remove DEBUG defines from mc13xxx-core
  mfd: Fix jz4740_adc_set_enabled
  mfd: Add TPS658621C device ID
  mfd: Fix twl-irq function declaration warnings
  regulator: max8998 BUCK1/2 voltage change with use of GPIOs
  mfd: Voltages and GPIOs platform_data definitions for max8998
  regulator: max8998 BUCK1/2 internal voltages and indexes defined
  mfd: Support for ICs compliant with max8998
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code
  watchdog: add support for Broadcom BCM63xx built-in watchdog
  watchdog: f71808e_wdt: add support for the F71889FG
  watchdog: MachZ: fix debug macro
  watchdog: it8712f_wdt: Add module parameter for alternative reset sources
  watchdog: it8712f_wdt: Add comments for config/control register names
  watchdog: it87_wdt: Add support for watchdogs with 8b timers
  watchdog: it87_wdt: Add support for IT8720F watchdog
  watchdog:  Use static const char * const where possible
  watchdog: iTCO_wdt: Cleanup warning messages
  watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg DeviceIDs

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: BUG_ON fix: check if page has buffers before calling page_buffers()

The iTCO_wdt driver erroneously releases the pci_dev, and causes PCI hotremove
to fail because of an incorrect usage count.

The probe for this driver does a for_each_pci_dev() which gets a reference for
a pci_dev when iTCO_wdt_init() is successful.  The for_each_pci_dev() loop
puts a reference for a pci_dev when iTCO_wdt_init() fails, so the
iTCO_wdt_init() does not need to do any pci_dev_put()'s.

The only pci_dev_put() that is required is in the iTCO_wdt_cleanup() function.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The missing definitions are now in.

This reverts commit 23886839.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Properly free irq and unregister max8998->rtc device in
max8998_i2c_probe() error path and max8998_i2c_remove().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

i2c_smbus_write_byte_data() returns zero or negative value,
therefore no need to check if ret is greater than zero or not.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Calling sysfs_remove_group() to remove sysfs entries
and unregister bl_pdev in pcf50633_remove().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

For MMC1 Controller, card detect interrupt source is
twl6030 which is non-gpio. The card detect call back function provides
card present/absent status by reading MMC Control register present
on twl6030. This functionality was introduced in mfd tree on
track to kernel.org

Sync pandaboard to the same and make mmc work.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

return -ENOMEM if create_singlethread_workqueue failed.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

If bytes == (TPS6507X_MAX_REGISTER + 1), we have a buffer overflow when
doing memcpy(&msg[1], src, bytes).
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

This static struct resource tc6393xb_mmc_resources[] is used in resume function,
therefore the data can not be wiped after init.

Also, this causes a section mismatch.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Implement support for controlling WM831x and WM832x devices using SPI.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

In preparation for the addition of SPI support for the WM831x move the I2C
specific code into a separate file with a separate Kconfig option so the
I2C support can be excluded from the build.

Also update the 1133-EV1 PMIC module support for SMDK6410 to use the new
symbol.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

DEBUG and VERBOSE_DEBUG are not used.
Reported-by: David Jander <david@protonic.nl>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

When enabled is false, clear BIT(engine) of JZ_REG_ADC_ENABLE register.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The interface for this device should be identical to that of the
TPS658521A.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Fixes following sparse warnings for twl4030 and twl6030 irq files.

drivers/mfd/twl4030-irq.c:783:5: warning: symbol 'twl4030_init_irq' was not
declared. Should it be static?
drivers/mfd/twl4030-irq.c:863:5: warning: symbol 'twl4030_exit_irq' was not
declared. Should it be static?
drivers/mfd/twl4030-irq.c:873:5: warning: symbol 'twl4030_init_chip_irq' was
not declared. Should it be static?

drivers/mfd/twl6030-irq.c:226:5: warning: symbol 'twl6030_init_irq' was not
declared. Should it be static?
drivers/mfd/twl6030-irq.c:290:5: warning: symbol 'twl6030_exit_irq' was not
declared. Should it be static?
Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

max8998_pmic_probe:
- modified to check if valid pins are defined at platform
data
- maximal voltage values (predefined at platform data) are uploaded to
max8998 device

max8998_set_voltage_buck:
- BUCK1/2 voltages change between values already defined
- Checks if valid GPIO pins are passed from platform data
- If requested voltage cannot be satisfied from already defined values,
then one of free slots is used
- Predefined maximum voltages (as defined at platform data) are always
available
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

BUCK1/2 internal voltages and indexes defined in the struct max8998_data
max_get_voltage_register now uses index values to chose proper register
More generic BUCK1/2 registers names provided
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The chip TRM documentation contradicts itself about this bit, page 174
of swcu050e says bit should be 0 for clear-on-read behavior, while
page 487 says it should be 1. Testing shows it should be 1, so set
the .set_cor flag accordingly. This is needed for upcoming BCI
charging driver to function.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

When the cell data_size is 0, the resulting platform_data pointer will be
set to ZERO_SIZE_PTR. That could be misleading for device drivers running
a NULL check on thei platform_data pointer before dereferencing it.
Signed-off-by: Brian Harring <ferringb@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Now that we have twl4030 charger driver, add back it's platform_data
(which was removed by f7ea2dc5
as unused).
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The mfd driver for MC13783 recently got support for MC13892 and was
renamed accordingly from mc13783-core to mc13xxx-core.  Do the same for
rtc-mc13783.

The only relevant change is to use platform id's to tell the platform bus
that this driver is responsible for mc13892-rtc devices, too.
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Adding card detect callback function and card detect configuration
function for MMC1 Controller on OMAP4.

Card detect configuration function does initial configuration of the
MMC Control & PullUp-PullDown registers of Phoenix.

For MMC1 Controller, card detect interrupt source is
twl6030 which is non-gpio. The card detect call back function provides
card present/absent status by reading MMC Control register present
on twl6030.

Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect,
the suspend/resume initialization which was done in omap_hsmmc_gpio_init
previously is moved to the probe thus making it generic for both OMAP3 &
OMAP4.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mc13892 is the companion PMIC for Freescale's i.MX51.  It's similar enough
to mc13782 to support it in a single driver.

This patch introduces enough compatibility cruft to keep all users of the
superseded mc13783 driver unchanged.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>