- 26 May, 2022 35 commits
-
-
James Clark authored
Fix this include path to use perf's copy of the kernel header rather than the one from the root of the repo. This fixes build errors when only applying the perf tools part of a patchset rather than both sides. Reported-by:
German Gomez <german.gomez@arm.com> Signed-off-by:
James Clark <james.clark@arm.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Leo Yan authored
If the slang lib is not installed on the system, perf c2c tool disables TUI mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is missed to set true and thus it wrongly applies UI quirks in the function ui_quirks(). This commit forces to use stdio interface if slang is not supported, and it can avoid to apply the UI quirks and show the correct metric header. Before: ================================================= Shared Cache Line Distribution Pareto ================================================= ------------------------------------------------------------------------------- 0 0 0 99 0 0 0 0xaaaac17d6000 ------------------------------------------------------------------------------- 0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0 0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0 After: ================================================= Shared Cache Line Distribution Pareto ================================================= ------------------------------------------------------------------------------- 0 0 0 99 0 0 0 0xaaaac17d6000 ------------------------------------------------------------------------------- 0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0 0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0 Fixes: 5a1a99cd ("perf c2c report: Add main TUI browser") Reported-by:Joe Mario <jmario@redhat.com> Signed-off-by:
Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.orgSigned-off-by:
-
Namhyung Kim authored
$ sudo ./perf test -v offcpu 88: perf record offcpu profiling tests : --- start --- test child forked, pid 685966 Basic off-cpu test Basic off-cpu test [Success] test child finished with 0 ---- end ---- perf record offcpu profiling tests: Ok Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Ian Rogers <irogers@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Blake Jones <blakejones@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20220518224725.742882-7-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
This covers two different use cases. The first one is cgroup filtering given by -G/--cgroup option which controls the off-cpu profiling for tasks in the given cgroups only. The other use case is cgroup sampling which is enabled by --all-cgroups option and it adds PERF_SAMPLE_CGROUP to the sample_type to set the cgroup id of the task in the sample data. Example output. $ sudo perf record -a --off-cpu --all-cgroups sleep 1 $ sudo perf report --stdio -s comm,cgroup --call-graph=no ... # Samples: 144 of event 'offcpu-time' # Event count (approx.): 48452045427 # # Children Self Command Cgroup # ........ ........ ............... .......................................... # 61.57% 5.60% Chrome_ChildIOT /user.slice/user-657345.slice/user@657345.service/app.slice/... 29.51% 7.38% Web Content /user.slice/user-657345.slice/user@657345.service/app.slice/... 17.48% 1.59% Chrome_IOThread /user.slice/user-657345.slice/user@657345.service/app.slice/... 16.48% 4.12% pipewire-pulse /user.slice/user-657345.slice/user@657345.service/session.slice/... 14.48% 2.07% perf /user.slice/user-657345.slice/user@657345.service/app.slice/... 14.30% 7.15% CompositorTileW /user.slice/user-657345.slice/user@657345.service/app.slice/... 13.33% 6.67% Timer /user.slice/user-657345.slice/user@657345.service/app.slice/... ... Signed-off-by: -
Namhyung Kim authored
Recently sched_switch tracepoint added a new argument for prev_state, but it's hard to handle the change in a BPF program. Instead, we can check the function prototype in BTF before loading the program. Signed-off-by:
-
Namhyung Kim authored
It should honor cpu and task filtering with -a, -C or -p, -t options. Committer testing: # perf record --off-cpu --cpu 1 perf bench sched messaging -l 1000 # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 1.722 [sec] [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 1.446 MB perf.data (7248 samples) ] # # perf script | head -20 perf 97164 [001] 38287.696761: 1 cycles: ffffffffb6070174 native_write_msr+0x4 (vmlinux) perf 97164 [001] 38287.696764: 1 cycles: ffffffffb6070174 native_write_msr+0x4 (vmlinux) perf 97164 [001] 38287.696765: 9 cycles: ffffffffb6070174 native_write_msr+0x4 (vmlinux) perf 97164 [001] 38287.696767: 212 cycles: ffffffffb6070176 native_write_msr+0x6 (vmlinux) perf 97164 [001] 38287.696768: 5130 cycles: ffffffffb6070176 native_write_msr+0x6 (vmlinux) perf 97164 [001] 38287.696770: 123063 cycles: ffffffffb6e0011e syscall_return_via_sysret+0x38 (vmlinux) perf 97164 [001] 38287.696803: 2292748 cycles: ffffffffb636c82d __fput+0xad (vmlinux) swapper 0 [001] 38287.702852: 1927474 cycles: ffffffffb6761378 mwait_idle_with_hints.constprop.0+0x48 (vmlinux) :97513 97513 [001] 38287.767207: 1172536 cycles: ffffffffb612ff65 newidle_balance+0x5 (vmlinux) swapper 0 [001] 38287.769567: 1073081 cycles: ffffffffb618216d ktime_get_mono_fast_ns+0xd (vmlinux) :97533 97533 [001] 38287.770962: 984460 cycles: ffffffffb65b2900 selinux_socket_sendmsg+0x0 (vmlinux) :97540 97540 [001] 38287.772242: 883462 cycles: ffffffffb6d0bf59 irqentry_exit_to_user_mode+0x9 (vmlinux) swapper 0 [001] 38287.773633: 741963 cycles: ffffffffb6761378 mwait_idle_with_hints.constprop.0+0x48 (vmlinux) :97552 97552 [001] 38287.774539: 606680 cycles: ffffffffb62eda0a page_add_file_rmap+0x7a (vmlinux) :97556 97556 [001] 38287.775333: 502254 cycles: ffffffffb634f964 get_obj_cgroup_from_current+0xc4 (vmlinux) :97561 97561 [001] 38287.776163: 427891 cycles: ffffffffb61b1522 cgroup_rstat_updated+0x22 (vmlinux) swapper 0 [001] 38287.776854: 359030 cycles: ffffffffb612fc5e load_balance+0x9ce (vmlinux) :97567 97567 [001] 38287.777312: 330371 cycles: ffffffffb6a8d8d0 skb_set_owner_w+0x0 (vmlinux) :97566 97566 [001] 38287.777589: 311622 cycles: ffffffffb614a7a8 native_queued_spin_lock_slowpath+0x148 (vmlinux) :97512 97512 [001] 38287.777671: 307851 cycles: ffffffffb62e0f35 find_vma+0x55 (vmlinux) # # perf record --off-cpu --cpu 4 perf bench sched messaging -l 1000 # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 1.613 [sec] [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 1.415 MB perf.data (6729 samples) ] # perf script | head -20 perf 97650 [004] 38323.728036: 1 cycles: ffffffffb6070174 native_write_msr+0x4 (vmlinux) perf 97650 [004] 38323.728040: 1 cycles: ffffffffb6070174 native_write_msr+0x4 (vmlinux) perf 97650 [004] 38323.728041: 9 cycles: ffffffffb6070174 native_write_msr+0x4 (vmlinux) perf 97650 [004] 38323.728042: 208 cycles: ffffffffb6070176 native_write_msr+0x6 (vmlinux) perf 97650 [004] 38323.728044: 5026 cycles: ffffffffb6070176 native_write_msr+0x6 (vmlinux) perf 97650 [004] 38323.728046: 119970 cycles: ffffffffb6d0bebc syscall_exit_to_user_mode+0x1c (vmlinux) perf 97650 [004] 38323.728078: 2190103 cycles: 54b756 perf_tool__process_synth_event+0x16 (/home/acme/bin/perf) swapper 0 [004] 38323.783357: 1593139 cycles: ffffffffb6761378 mwait_idle_with_hints.constprop.0+0x48 (vmlinux) swapper 0 [004] 38323.785352: 1593139 cycles: ffffffffb6761378 mwait_idle_with_hints.constprop.0+0x48 (vmlinux) swapper 0 [004] 38323.797330: 1418936 cycles: ffffffffb6761378 mwait_idle_with_hints.constprop.0+0x48 (vmlinux) swapper 0 [004] 38323.802350: 1418936 cycles: ffffffffb6761378 mwait_idle_with_hints.constprop.0+0x48 (vmlinux) swapper 0 [004] 38323.806333: 1418936 cycles: ffffffffb6761378 mwait_idle_with_hints.constprop.0+0x48 (vmlinux) :97996 97996 [004] 38323.807145: 1418936 cycles: 7f5db9be6917 [unknown] ([unknown]) :97959 97959 [004] 38323.807730: 1445074 cycles: ffffffffb6329d36 memcg_slab_post_alloc_hook+0x146 (vmlinux) :97959 97959 [004] 38323.808103: 1341584 cycles: ffffffffb62fd90f get_page_from_freelist+0x112f (vmlinux) :97959 97959 [004] 38323.808451: 1227537 cycles: ffffffffb65b2905 selinux_socket_sendmsg+0x5 (vmlinux) :97959 97959 [004] 38323.808768: 1184321 cycles: ffffffffb6d1ba35 _raw_spin_lock_irqsave+0x15 (vmlinux) :97959 97959 [004] 38323.809073: 1153017 cycles: ffffffffb6a8d92d skb_set_owner_w+0x5d (vmlinux) :97959 97959 [004] 38323.809402: 1126875 cycles: ffffffffb6329c64 memcg_slab_post_alloc_hook+0x74 (vmlinux) :97959 97959 [004] 38323.809695: 1073248 cycles: ffffffffb6e0001d entry_SYSCALL_64+0x1d (vmlinux) # Signed-off-by: -
Namhyung Kim authored
Add --off-cpu option to enable the off-cpu profiling with BPF. It'd use a bpf_output event and rename it to "offcpu-time". Samples will be synthesized at the end of the record session using data from a BPF map which contains the aggregated off-cpu time at context switches. So it needs root privilege to get the off-cpu profiling. Each sample will have a separate user stacktrace so it will skip kernel threads. The sample ip will be set from the stacktrace and other sample data will be updated accordingly. Currently it only handles some basic sample types. The sample timestamp is set to a dummy value just not to bother with other events during the sorting. So it has a very big initial value and increase it on processing each samples. Good thing is that it can be used together with regular profiling like cpu cycles. If you don't want to that, you can use a dummy event to enable off-cpu profiling only. Example output: $ sudo perf record --off-cpu perf bench sched messaging -l 1000 $ sudo perf report --stdio --call-graph=no # Total Lost Samples: 0 # # Samples: 41K of event 'cycles' # Event count (approx.): 42137343851 ... # Samples: 1K of event 'offcpu-time' # Event count (approx.): 587990831640 # # Children Self Command Shared Object Symbol # ........ ........ ............... .................. ......................... # 81.66% 0.00% sched-messaging libc-2.33.so [.] __libc_start_main 81.66% 0.00% sched-messaging perf [.] cmd_bench 81.66% 0.00% sched-messaging perf [.] main 81.66% 0.00% sched-messaging perf [.] run_builtin 81.43% 0.00% sched-messaging perf [.] bench_sched_messaging 40.86% 40.86% sched-messaging libpthread-2.33.so [.] __read 37.66% 37.66% sched-messaging libpthread-2.33.so [.] __write 2.91% 2.91% sched-messaging libc-2.33.so [.] __poll ... As you can see it spent most of off-cpu time in read and write in bench_sched_messaging(). The --call-graph=no was added just to make the output concise here. It uses perf hooks facility to control BPF program during the record session rather than adding new BPF/off-cpu specific calls. Signed-off-by: -
Namhyung Kim authored
Currently evsel__new_idx() sets more sample_type bits when it finds a BPF-output event. But it should honor what's recorded in the perf data file rather than blindly sets the bits. Otherwise it could lead to a parse error when it recorded with a modified sample_type. Signed-off-by:
-
Claire Jensen authored
Counts expected fields for various commands. No testing added for summary mode since it is broken. An example of the summary output is: summary,263831,,instructions:u,1435072,100.0,0.46,insn per cycle ,,,,,1.37,stalled cycles per insn This should be: summary,263831,,instructions:u,1435072,100.0,0.46,insn per cycle summary,,,,,,1.37,stalled cycles per insn The output has 7 fields when it should have 8. Additionally, the newline spacing is wrong, so it was excluded from testing until a fix is made. Committer testing: $ perf test "perf stat CSV output" 88: perf stat CSV output linter : Ok $ $ perf test -v "perf stat CSV output" Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc 88: perf stat CSV output linter : --- start --- test child forked, pid 2622839 Checking CSV output: no args [Success] Checking CSV output: system wide [Skip] paranoid and not root Checking CSV output: system wide [Skip] paranoid and not root Checking CSV output: interval [Success] Checking CSV output: event [Success] Checking CSV output: per core [Skip] paranoid and not root Checking CSV output: per thread [Skip] paranoid and not root Checking CSV output: per die [Skip] paranoid and not root Checking CSV output: per node [Skip] paranoid and not root Checking CSV output: per socket [Skip] paranoid and not root test child finished with 0 ---- end ---- perf stat CSV output linter: Ok $ I did a s/parnoia/paranoid/g on the [Skip] lines. Signed-off-by:Claire Jensen <cjense@google.com> Tested-by:
-
Adrian Hunter authored
System-wide events do not have threads, so do not propagate threads to them. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
-
Adrian Hunter authored
Currently, user_requested_cpus supplants system-wide CPUs when the evlist has_user_cpus. Change that so that system-wide events retain their own CPUs and they are added to all_cpus. Signed-off-by:
-
Adrian Hunter authored
Add comments for 'system_wide' and 'requires_cpu' booleans Signed-off-by:
-
Adrian Hunter authored
Uncore events require a CPU i.e. it cannot be -1. The evsel system_wide flag is intended for events that should be on every CPU, which does not make sense for uncore events because uncore events do not map one-to-one with CPUs. These 2 requirements are not exactly the same, so introduce a new flag 'requires_cpu' for the uncore case. Signed-off-by:
-
Adrian Hunter authored
Print an error message if the predetermined number of mmaps is incorrect. Signed-off-by:
-
Adrian Hunter authored
mmap_per_evsel() will skip events that do not match the CPU, so all CPUs can be iterated in any case. Signed-off-by:
-
Adrian Hunter authored
To support collection of system-wide events with user requested CPUs, all_cpus must be a superset of user_requested_cpus. In order to support all_cpus to be a superset of user_requested_cpus, all_cpus must be used instead of user_requested_cpus when dealing with CPUs of all events instead of CPUs of requested events. Signed-off-by:
-
Adrian Hunter authored
User space tasks can migrate between CPUs, so when tracing selected CPUs, sideband for all CPUs is still needed. This is in preparation for allowing system-wide events on all CPUs while the user requested events are on only user requested CPUs. Signed-off-by:
-
Adrian Hunter authored
Use evlist__add_dummy_on_all_cpus() for switch tracking in preparation for allowing system-wide events on all CPUs while the user requested events are on only user requested CPUs. Signed-off-by:
-
Adrian Hunter authored
Use evlist__add_dummy_on_all_cpus() in record__config_text_poke() in preparation for allowing system-wide events on all CPUs while the user requested events are on only user requested CPUs. Signed-off-by:
-
Adrian Hunter authored
Add evlist__add_dummy_on_all_cpus() to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation. For convenience, add evlist__add_aux_dummy() so that the logic can be used whether or not the event needs to be system-wide. Signed-off-by:
-
Adrian Hunter authored
Factor out evlist__dummy_event() so it can be reused. Signed-off-by:
-
Adrian Hunter authored
Remove auxtrace_mmap_params__set_idx() per_cpu parameter because it isn't needed. Signed-off-by:
-
Adrian Hunter authored
Add mmap_needed to auxtrace_mmap_params. Currently an auxtrace mmap is always attempted even if the event is not an auxtrace event. That works because, when AUX area tracing, there is always an auxtrace event first for every mmap. Prepare for that not being the case, which it won't be when sideband tracking events are allowed on all CPUs even when auxtrace is limited to selected CPUs. Signed-off-by:
-
Adrian Hunter authored
Add a test for system-wide side band even when tracing selected CPUs. The test fails before the patches up to "perf tools: Allow system-wide events to keep their own CPUs" are applied, passes afterwards. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
By adding a feature test for bpf_map_create() and providing a fallback if it isn't present in older versions of libbpf. This also fixes the build with torvalds/master at this point: $ git log --oneline -5 torvalds/master babf0bb9 (torvalds/master) Merge tag 'xfs-5.19-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux e375780b Merge tag 'fsnotify_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs 8b728edc Merge tag 'fs_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs 3f306ea2 Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping fbe86dac Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi $ Coping with: $ git log --oneline -2 d16495a9 d16495a9 libbpf: remove bpf_create_map*() APIs e2371b16 libbpf: start 1.0 development cycle $ As the __weak function fails to build as it calls the now removed bpf_create_map() API. Testing: $ rpm -q libbpf-devel libbpf-devel-0.4.0-2.fc35.x86_64 $ $ make -C tools/perf BUILD_BPF_SKEL=1 LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin $ cat /tmp/build/perf/feature/test-libbpf-bpf_map_create.make.output test-libbpf-bpf_map_create.c: In function ‘main’: test-libbpf-bpf_map_create.c:6:16: error: implicit declaration of function ‘bpf_map_create’; did you mean ‘bpf_map_freeze’? [-Werror=implicit-function-declaration] 6 | return bpf_map_create(0 /* map_type */, NULL /* map_name */, 0, /* key_size */, | ^~~~~~~~~~~~~~ | bpf_map_freeze test-libbpf-bpf_map_create.c:6:87: error: expected expression before ‘,’ token 6 | return bpf_map_create(0 /* map_type */, NULL /* map_name */, 0, /* key_size */, | ^ cc1: all warnings being treated as errors $ $ objdump -dS /tmp/build/perf/perf | grep '<bpf_map_create>:' -A20 000000000058b290 <bpf_map_create>: { 58b290: 55 push %rbp 58b291: 48 89 e5 mov %rsp,%rbp 58b294: 48 83 ec 10 sub $0x10,%rsp 58b298: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 58b29f: 00 00 58b2a1: 48 89 45 f8 mov %rax,-0x8(%rbp) 58b2a5: 31 c0 xor %eax,%eax return bpf_create_map(map_type, key_size, value_size, max_entries, 0); 58b2a7: 48 8b 45 f8 mov -0x8(%rbp),%rax 58b2ab: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax 58b2b2: 00 00 58b2b4: 75 10 jne 58b2c6 <bpf_map_create+0x36> } 58b2b6: c9 leave 58b2b7: 89 d6 mov %edx,%esi 58b2b9: 89 ca mov %ecx,%edx 58b2bb: 44 89 c1 mov %r8d,%ecx return bpf_create_map(map_type, key_size, value_size, max_entries, 0); 58b2be: 45 31 c0 xor %r8d,%r8d $ Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/linux-perf-users/Yo+XvQNKL4K5khl2@kernel.orgSigned-off-by:
-
Jiri Olsa authored
By adding a feature test for btf__raw_data() and providing a fallback if it isn't present in older versions of libbpf. Committer testing: $ rpm -q libbpf-devel libbpf-devel-0.4.0-2.fc35.x86_64 $ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin $ cat /tmp/build/perf/feature/test-libbpf-btf__raw_data.make.output test-libbpf-btf__raw_data.c: In function ‘main’: test-libbpf-btf__raw_data.c:6:9: error: implicit declaration of function ‘btf__raw_data’; did you mean ‘btf__get_raw_data’? [-Werror=implicit-function-declaration] 6 | btf__raw_data(NULL /* btf_ro */, NULL /* size */); | ^~~~~~~~~~~~~ | btf__get_raw_data cc1: all warnings being treated as errors $ objdump -dS /tmp/build/perf/perf | grep '<btf__raw_data>:' -A20 00000000005b3050 <btf__raw_data>: { 5b3050: 55 push %rbp 5b3051: 48 89 e5 mov %rsp,%rbp 5b3054: 48 83 ec 10 sub $0x10,%rsp 5b3058: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 5b305f: 00 00 5b3061: 48 89 45 f8 mov %rax,-0x8(%rbp) 5b3065: 31 c0 xor %eax,%eax return btf__get_raw_data(btf_ro, size); 5b3067: 48 8b 45 f8 mov -0x8(%rbp),%rax 5b306b: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax 5b3072: 00 00 5b3074: 75 06 jne 5b307c <btf__raw_data+0x2c> } 5b3076: c9 leave return btf__get_raw_data(btf_ro, size); 5b3077: e9 14 99 e5 ff jmp 40c990 <btf__get_raw_data@plt> 5b307c: e8 af a7 e5 ff call 40d830 <__stack_chk_fail@plt> 5b3081: 66 66 2e 0f 1f 84 00 data16 cs nopw 0x0(%rax,%rax,1) 5b3088: 00 00 00 00 $ Signed-off-by:Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Jiri Olsa authored
By adding a feature test for bpf_object__next_map() and providing a fallback if it isn't present in older versions of libbpf. Committer testing: $ rpm -q libbpf-devel libbpf-devel-0.4.0-2.fc35.x86_64 $ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin $ cat /tmp/build/perf/feature/test-libbpf-bpf_object__next_map.make.output test-libbpf-bpf_object__next_map.c: In function ‘main’: test-libbpf-bpf_object__next_map.c:6:9: error: implicit declaration of function ‘bpf_object__next_map’; did you mean ‘bpf_object__next’? [-Werror=implicit-function-declaration] 6 | bpf_object__next_map(NULL /* obj */, NULL /* prev */); | ^~~~~~~~~~~~~~~~~~~~ | bpf_object__next cc1: all warnings being treated as errors $ $ objdump -dS /tmp/build/perf/perf | grep '<bpf_object__next_map>:' -A20 00000000005b2e00 <bpf_object__next_map>: { 5b2e00: 55 push %rbp 5b2e01: 48 89 e5 mov %rsp,%rbp 5b2e04: 48 83 ec 10 sub $0x10,%rsp 5b2e08: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 5b2e0f: 00 00 5b2e11: 48 89 45 f8 mov %rax,-0x8(%rbp) 5b2e15: 31 c0 xor %eax,%eax return bpf_map__next(prev, obj); 5b2e17: 48 8b 45 f8 mov -0x8(%rbp),%rax 5b2e1b: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax 5b2e22: 00 00 5b2e24: 75 0f jne 5b2e35 <bpf_object__next_map+0x35> } 5b2e26: c9 leave 5b2e27: 49 89 f8 mov %rdi,%r8 5b2e2a: 48 89 f7 mov %rsi,%rdi return bpf_map__next(prev, obj); 5b2e2d: 4c 89 c6 mov %r8,%rsi 5b2e30: e9 cb b1 e5 ff jmp 40e000 <bpf_map__next@plt> $ Signed-off-by: -
Jiri Olsa authored
By adding a feature test for bpf_object__next_program() and providing a fallback if it isn't present in older versions of libbpf. Committer testing: $ rpm -q libbpf-devel libbpf-devel-0.4.0-2.fc35.x86_64 $ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin $ cat /tmp/build/perf/feature/test-libbpf-bpf_object__next_program.make.output test-libbpf-bpf_object__next_program.c: In function ‘main’: test-libbpf-bpf_object__next_program.c:6:9: error: implicit declaration of function ‘bpf_object__next_program’; did you mean ‘bpf_object__unpin_programs’? [-Werror=implicit-function-declaration] 6 | bpf_object__next_program(NULL /* obj */, NULL /* prev */); | ^~~~~~~~~~~~~~~~~~~~~~~~ | bpf_object__unpin_programs cc1: all warnings being treated as errors $ $ objdump -dS /tmp/build/perf/perf | grep '<bpf_object__next_program>:' -A20 00000000005b2dc0 <bpf_object__next_program>: { 5b2dc0: 55 push %rbp 5b2dc1: 48 89 e5 mov %rsp,%rbp 5b2dc4: 48 83 ec 10 sub $0x10,%rsp 5b2dc8: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax 5b2dcf: 00 00 5b2dd1: 48 89 45 f8 mov %rax,-0x8(%rbp) 5b2dd5: 31 c0 xor %eax,%eax return bpf_program__next(prev, obj); 5b2dd7: 48 8b 45 f8 mov -0x8(%rbp),%rax 5b2ddb: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax 5b2de2: 00 00 5b2de4: 75 0f jne 5b2df5 <bpf_object__next_program+0x35> } 5b2de6: c9 leave 5b2de7: 49 89 f8 mov %rdi,%r8 5b2dea: 48 89 f7 mov %rsi,%rdi return bpf_program__next(prev, obj); 5b2ded: 4c 89 c6 mov %r8,%rsi 5b2df0: e9 3b b4 e5 ff jmp 40e230 <bpf_program__next@plt> $ Signed-off-by: -
Jiri Olsa authored
By adding a feature test for bpf_prog_load() and providing a fallback if it isn't present in older versions of libbpf. Committer testing: $ rpm -q libbpf-devel libbpf-devel-0.4.0-2.fc35.x86_64 $ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin $ cat /tmp/build/perf/feature/test-libbpf-bpf_prog_load.make.output test-libbpf-bpf_prog_load.c: In function ‘main’: test-libbpf-bpf_prog_load.c:6:16: error: implicit declaration of function ‘bpf_prog_load’ [-Werror=implicit-function-declaration] 6 | return bpf_prog_load(0 /* prog_type */, NULL /* prog_name */, | ^~~~~~~~~~~~~ cc1: all warnings being treated as errors $ $ objdump -dS /tmp/build/perf/perf | grep '<bpf_prog_load>:' -A20 00000000005b2d70 <bpf_prog_load>: { 5b2d70: 55 push %rbp 5b2d71: 48 89 ce mov %rcx,%rsi 5b2d74: 4c 89 c8 mov %r9,%rax 5b2d77: 49 89 d2 mov %rdx,%r10 5b2d7a: 4c 89 c2 mov %r8,%rdx 5b2d7d: 48 89 e5 mov %rsp,%rbp 5b2d80: 48 83 ec 18 sub $0x18,%rsp 5b2d84: 64 48 8b 0c 25 28 00 mov %fs:0x28,%rcx 5b2d8b: 00 00 5b2d8d: 48 89 4d f8 mov %rcx,-0x8(%rbp) 5b2d91: 31 c9 xor %ecx,%ecx return bpf_load_program(prog_type, insns, insn_cnt, license, 5b2d93: 41 8b 49 5c mov 0x5c(%r9),%ecx 5b2d97: 51 push %rcx 5b2d98: 4d 8b 49 60 mov 0x60(%r9),%r9 5b2d9c: 4c 89 d1 mov %r10,%rcx 5b2d9f: 44 8b 40 1c mov 0x1c(%rax),%r8d 5b2da3: e8 f8 aa e5 ff call 40d8a0 <bpf_load_program@plt> } $ Signed-off-by: -
Jiri Olsa authored
The btf__load_from_kernel_by_id() only takes one arg, not two. Committer notes: I tested it just with an older libbpf, one where btf__load_from_kernel_by_id() wasn't introduced yet. A test with a newer dynamic libbpf would fail because the btf__load_from_kernel_by_id() is there, but takes just one arg. Fixes: 0ae065a5 ("perf build: Fix check for btf__load_from_kernel_by_id() in libbpf") Signed-off-by:
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs updates from Dave Chinner: "This is a big update with lots of new code. The summary below them all, so I'll just touch on teh higlights. The two main new features are Large Extent Counts and Logged Attribute Replay - these are two new foundational features that we are building more complex future features on top of. For upcoming functionality, we need to be able to store hundreds of millions of xattrs per inode. The Large Extent Count feature removes the limits that prevent this scale of xattr storage, and while we were modifying the on disk extent count format we also increased the number of data extents we support per inode from 2^32 to 2^47. We also need to be able to modify xattrs as part of larger atomic transactions rather than as standalone transactions. The Logged Attribute Replay feature introduces the infrastructure that allows us to use intents to record the attribute modifications in the journal before we start them, hence allowing other atomic transactions to log attribute modification intents and then defer the actual modification to later. If we then crash, log recovery then guarantees that the attribute is replayed in the context of the atomic transaction that logged the intent. A significant chunk of the commits in this merge are for the base attribute replay functionality along with fixes, improvements and cleanups related to this new functioanlity. Allison deserves a big round of thanks for her ongoing work to get this functionality into XFS. There are also many other smaller changes and improvements, so overall this is one of the bigger XFS merge requests in some time. I will be following up next week with another smaller pull request - we already have another round of fixes and improvements to the logged attribute replay functionality just about ready to go. They'll soak and test over the next week, and I'll send a pull request for them near the end of the merge window. Summary: - support for printk message indexing. - large extent counts to provide support for up to 2^47 data extents and 2^32 attribute extents, allowing us to scale beyond 4 billion data extents to billions of xattrs per inode. - conversion of various flags fields to be consistently declared as unsigned bit fields. - improvements to realtime extent accounting and converts them to per-cpu counters to match all the other block and inode accounting. - reworks core log formatting code to reduce iterations, have a shorter, cleaner fast path and generally be easier to understand and maintain. - improvements to rmap btree searches that reduce overhead by up to 30% resulting in xfs_scrub runtime reductions of 15%. - improvements to reflink that remove the size limitations in remapping operations and greatly reduce the size of transaction reservations. - reworks the minimum log size calculations to allow us to change transaction reservations without changing the minimum supported log size. - removal of quota warning support as it has never been used on Linux. - intent whiteouts to allow us to cancel intents that are completed entirely in memory rather than having use CPU and disk bandwidth formatting and writing them into the journal when it is not necessary. This makes rmap, reflink and extent freeing slightly more efficient, but provides massive improvements for.... - Logged Attribute Replay feature support. This is a fundamental change to the way we modify attributes, laying the foundation for future integration of attribute modifications as part of other atomic transactional operations the filesystem performs. - Lots of cleanups and fixes for the logged attribute replay functionality" * tag 'xfs-5.19-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (124 commits) xfs: can't use kmem_zalloc() for attribute buffers xfs: detect empty attr leaf blocks in xfs_attr3_leaf_verify xfs: ATTR_REPLACE algorithm with LARP enabled needs rework xfs: use XFS_DA_OP flags in deferred attr ops xfs: remove xfs_attri_remove_iter xfs: switch attr remove to xfs_attri_set_iter xfs: introduce attr remove initial states into xfs_attr_set_iter xfs: xfs_attr_set_iter() does not need to return EAGAIN xfs: clean up final attr removal in xfs_attr_set_iter xfs: remote xattr removal in xfs_attr_set_iter() is conditional xfs: XFS_DAS_LEAF_REPLACE state only needed if !LARP xfs: split remote attr setting out from replace path xfs: consolidate leaf/node states in xfs_attr_set_iter xfs: kill XFS_DAC_LEAF_ADDNAME_INIT xfs: separate out initial attr_set states xfs: don't set quota warning values xfs: remove warning counters from struct xfs_dquot_res xfs: remove quota warning limit from struct xfs_quota_limits xfs: rework deferred attribute operation setup xfs: make xattri_leaf_bp more useful ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull fsnotify updates from Jan Kara: "The biggest part of this is support for fsnotify inode marks that don't pin inodes in memory but rather get evicted together with the inode (they are useful if userspace needs to exclude receipt of events from potentially large subtrees using fanotify ignore marks). There is also a fix for more consistent handling of events sent to parent and a fix of sparse(1) complaints" * tag 'fsnotify_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: fix incorrect fmode_t casts fsnotify: consistent behavior for parent not watching children fsnotify: introduce mark type iterator fanotify: enable "evictable" inode marks fanotify: use fsnotify group lock helpers fanotify: implement "evictable" inode marks fanotify: factor out helper fanotify_mark_update_flags() fanotify: create helper fanotify_mark_user_flags() fsnotify: allow adding an inode mark without pinning inode dnotify: use fsnotify group lock helpers nfsd: use fsnotify group lock helpers audit: use fsnotify group lock helpers inotify: use fsnotify group lock helpers fsnotify: create helpers for group mark_mutex lock fsnotify: make allow_dups a property of the group fsnotify: pass flags argument to fsnotify_alloc_group() fsnotify: fix wrong lockdep annotations inotify: move control flags from mask to mark flags inotify: show inotify mask flags in proc fdinfo
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull writeback and ext2 cleanups from Jan Kara: "One small ext2 cleanup and one writeback spelling fix" * tag 'fs_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: writeback: fix typo in comment fs: ext2: Fix duplicate included linux/dax.h
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping updates from Christoph Hellwig: - don't over-decrypt memory (Robin Murphy) - takes min align mask into account for the swiotlb max mapping size (Tianyu Lan) - use GFP_ATOMIC in dma-debug (Mikulas Patocka) - fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me) - don't fail on highmem CMA pages in dma_direct_alloc_pages (me) - cleanup swiotlb initialization and share more code with swiotlb-xen (me, Stefano Stabellini) * tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits) dma-direct: don't over-decrypt memory swiotlb: max mapping size takes min align mask into account swiotlb: use the right nslabs-derived sizes in swiotlb_init_late swiotlb: use the right nslabs value in swiotlb_init_remap swiotlb: don't panic when the swiotlb buffer can't be allocated dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm x86: remove cruft from <asm/dma-mapping.h> swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl swiotlb: merge swiotlb-xen initialization into swiotlb swiotlb: provide swiotlb_init variants that remap the buffer swiotlb: pass a gfp_mask argument to swiotlb_init_late swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction swiotlb: make the swiotlb_init interface more useful x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled x86: remove the IOMMU table infrastructure MIPS/octeon: use swiotlb_init instead of open coding it arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region swiotlb: rename swiotlb_late_init_with_default_size ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "This consists of a small set of driver updates (lpfc, ufs, mpt3sas mpi3mr, iscsi target). Apart from that this is mostly small fixes with very few core changes (the biggest one being VPD caching)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits) scsi: target: tcmu: Avoid holding XArray lock when calling lock_page scsi: elx: efct: Remove NULL check after calling container_of() scsi: dpt_i2o: Drop redundant spinlock initialization scsi: qedf: Remove redundant variable op scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver() scsi: fnic: Replace DMA mask of 64 bits with 47 bits scsi: mpi3mr: Add target device related sysfs attributes scsi: mpi3mr: Add shost related sysfs attributes scsi: elx: efct: Remove redundant memset() statement scsi: megaraid_sas: Remove redundant memset() statement scsi: mpi3mr: Return error if dma_alloc_coherent() fails scsi: hisi_sas: Fix rescan after deleting a disk scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset scsi: libsas: Refactor sas_ata_hard_reset() scsi: mpt3sas: Update driver version to 42.100.00.00 scsi: mpt3sas: Fix junk chars displayed while printing ChipName scsi: ipr: Use kobj_to_dev() scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init() scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc() scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc() ...
-
- 25 May, 2022 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "Not much dramatic changes at this time, but we've received quite a lot of changes for ASoC, while there are still a few fixes and quirks for usual HD- and USB-auido. Here are some highlights. ASoC: - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs - Initial stages of Intel AVS driver merge - Introduction of v4 IPC mechanism for SOF - TDM mode support for AK4613 - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780 Others: - A few regression fixes after the USB-audio endpoint management refactoring - More enhancements for Cirrus HD-audio codec support (still ongoing) - Addition of generic serial MIDI driver" * tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits) ALSA: hda/realtek - Add new type for ALC245 ALSA: usb-audio: Configure sync endpoints before data ALSA: ctxfi: fix typo in comment ALSA: cs5535audio: fix typo in comment ALSA: ctxfi: Add SB046x PCI ID ALSA: usb-audio: Add missing ep_idx in fixed EP quirks ALSA: usb-audio: Workaround for clock setup on TEAC devices ALSA: lola: Bounds check loop iterator against streams array size ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv() ASoC: rt1308-sdw: add the default value of register 0xc320 ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic ASoC: rt9120: Fix 3byte read, valule offset typo ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver. ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition() ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR' ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get() ASoC: SOF: mediatek: remove duplicate include in mt8195.c ASoC: SOF: mediatek: Add mt8195 debug dump ASoC: SOF: mediatek: Add mediatek common debug dump ... -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree updates from Rob Herring: "Bindings: - Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm, qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen, Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq, fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers - Convert various Arm Ltd peripheral IP bindings to schemas - New bindings for Menlo board CPLD, DH electronics board CPLD, Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751 GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and Microchip/SMSC LAN95xx USB Ethernet controllers - Add vendor prefix for Enclustra - Add various compatible string additions - Various example fixes and cleanups - Remove unused hisilicon,hi6220-reset binding - Treewide fix properties missing type definition - Drop some empty and unreferenced .txt bindings - Documentation improvements for writing schemas DT driver core: - Drop static IRQ resources for DT platform devices as IRQ setup is dynamic and drivers have all been converted to use platform_get_irq() and friends - Rework memory allocations and frees for overlays - Continue overlay notifier callbacks on successful calls and add unittests - Handle 'interrupts-extended' in early DT IRQ setup - Fix of_property_read_string() errors to match documentation - Ignore disabled nodes in FDT API calls" * tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits) of/irq: fix typo in comment dt-bindings: Fix properties without any type Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example" dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings dt-bindings: timer: samsung,exynos4210-mct: define strict clock order dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems dt-bindings: timer: cdns,ttc: drop unneeded minItems dt-bindings: mailbox: zynqmp_ipi: convert to yaml dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers dt-bindings: net: add schema for ASIX USB Ethernet controllers of/fdt: Ignore disabled memory nodes dt-bindings: arm: fix typos in compatible dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360 dt-bindings: display: convert Arm Komeda to DT schema dt-bindings: display: convert Arm Mali-DP to DT schema dt-bindings: display: convert Arm HDLCD to DT schema dt-bindings: display: convert PL110/PL111 to DT schema dt-bindings: arm: convert vexpress-config to DT schema dt-bindings: arm: convert vexpress-sysregs to DT schema ... -
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Intel PT: - Allow hardware tracing on KVM test programs. In this case, the VM is not running an OS, but only the functions loaded into it by the hypervisor test program, and conveniently, loaded at the same virtual addresses. - Improve documentation: - Add link to perf wiki's page - Cleanups: - Delete now unused perf-with-kcore.sh script - Remove unused machines__find_host() ARM SPE (Statistical Profile Extensions): - Add man page entry. Vendor Events: - Update various Intel event topics - Update various microarch events - Fix various cstate metrics - Fix Alderlake metric groups - Add sapphirerapids events - Add JSON files for ARM Cortex A34, A35, A55, A510, A65, A73, A75, A77, A78, A710, X1, X2 and Neoverse E1 - Update Cortex A57/A72 perf stat: - Introduce stats for the user and system rusage times perf c2c: - Prep work to support ARM systems perf annotate: - Add --percent-limit option perf lock: - Add -t/--thread option for report - Do not discard broken lock stats perf bench: - Add breakpoint benchmarks perf test: - Limit to only run executable scripts in tests - Add basic perf record tests - Add stat record+report test - Add basic stat and topdown group test - Skip several tests when the user hasn't permission to perform them - Fix test case 81 ("perf record tests") on s390x perf version: - debuginfod support improvements perf scripting python: - Expose symbol offset and source information perf build: - Error for BPF skeletons without LIBBPF - Use Python devtools for version autodetection rather than runtime Miscellaneous: - Add riscv64 support to 'perf jitdump' - Various fixes/tidy ups related to cpu_map - Fixes for handling Intel hybrid systems" * tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (122 commits) perf intel-pt: Add guest_code support perf kvm report: Add guest_code support perf script: Add guest_code support perf tools: Add guest_code support perf tools: Factor out thread__set_guest_comm() perf tools: Add machine to machines back pointer perf vendors events arm64: Update Cortex A57/A72 perf vendors events arm64: Arm Neoverse E1 perf vendors events arm64: Arm Cortex-X2 perf vendors events arm64: Arm Cortex-X1 perf vendors events arm64: Arm Cortex-A710 perf vendors events arm64: Arm Cortex-A78 perf vendors events arm64: Arm Cortex-A77 perf vendors events arm64: Arm Cortex-A75 perf vendors events arm64: Arm Cortex-A73 perf vendors events arm64: Arm Cortex-A65 perf vendors events arm64: Arm Cortex-A510 perf vendors events arm64: Arm Cortex-A55 perf vendors events arm64: Arm Cortex-A35 perf vendors events arm64: Arm Cortex-A34 ...
-
Linus Torvalds authored
Merge tag 'checkpatch-new-alloc-check-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull checkpatch update from Gustavo Silva: "kvmalloc() and kvzalloc() functions have now 2-factor multiplication argument forms kvmalloc_array() and kvcalloc(). Add alloc-with-multiplies checks for these new functions" * tag 'checkpatch-new-alloc-check-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: checkpatch: add new alloc functions to alloc with multiplies check
-
