- 21 Dec, 2019 1 commit
-
-
Quinn Tran authored
Session is stuck if driver sees FW has received a PRLI. Driver allows FW to finish with processing of PRLI by checking back with FW at a later time to see if the PRLI has finished. Instead, driver failed to push forward after re-checking PRLI completion. Fixes: ce0ba496 ("scsi: qla2xxx: Fix stuck login session") Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20191217220617.28084-9-hmadhani@marvell.comSigned-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
- 20 Dec, 2019 37 commits
-
-
Quinn Tran authored
This patch does not change any any functionality. Link: https://lore.kernel.org/r/20191217220617.28084-8-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch adds more details when D-Port diag async event is generated by the firmware. Link: https://lore.kernel.org/r/20191217220617.28084-7-hmadhani@marvell.comSigned-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Himanshu Madhani authored
logout_on_delete flag should not be set if the topology is Loop. This patch fixes unintentional logout during loop topology. Link: https://lore.kernel.org/r/20191217220617.28084-6-hmadhani@marvell.comSigned-off-by:
-
Shyam Sundar authored
This patch removes unused qla2x00_async_logout_done from the code. Link: https://lore.kernel.org/r/20191217220617.28084-5-hmadhani@marvell.comSigned-off-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
-
Shyam Sundar authored
This patch adds a shadow variable to hold disc_state history for the fcport and prints state transition when the logging is enabled. Link: https://lore.kernel.org/r/20191217220617.28084-4-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
On timeout, SRB pointer was cleared from outstanding command array and dropped. It was not allowed to go through the done process and cleanup. This patch will abort the SRB where FW will return it with an error status and resume the normal cleanup. Link: https://lore.kernel.org/r/20191217220617.28084-3-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
During cable pull test case, if the port is disconnected for time larger than devloss timeout, driver does not mark path offline. In such case, instead of notifying SCSI-ML of loop down, driver goes into endless loop of device relogin because defer flag is set. With newer handling of device relogin in driver discovery, defer flag is now redundant. This patch removes defer flag and cleans up code handling port lost indication to SCSI-ML. Link: https://lore.kernel.org/r/20191217220617.28084-2-hmadhani@marvell.comSigned-off-by:
Quinn Tran <qtran@marvell.com> Signed-off-by:
-
Thomas Hellstrom authored
These errors typically occur with swiotlb when the swiotlb buffer is full. But they are transient and would typically unnecessarily worry a user. Instead of errors, print debug messages. Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20191203193052.7583-2-thomas_os@shipmail.orgAcked-by:
Jim Gill <jgill@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
With swiotlb, the first byte of the sense buffer may in some cases be uninitialized since we use DMA_FROM_DEVICE, and the device incorrectly doesn't clear it. In those cases, clear it after DMA unmapping. Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20191203193052.7583-1-thomas_os@shipmail.orgSuggested-by:
Vishal Bhakta <vbhakta@vmware.com> Acked-by:
-
Nathan Chancellor authored
Clang warns: ../drivers/scsi/csiostor/csio_scsi.c:1386:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] csio_lnodes_exit(hw, 1); ^ ../drivers/scsi/csiostor/csio_scsi.c:1382:2: note: previous statement is here if (*buf != '1') ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: a3667aae ("[SCSI] csiostor: Chelsio FCoE offload driver") Link: https://github.com/ClangBuiltLinux/linux/issues/818 Link: https://lore.kernel.org/r/20191218014726.8455-1-natechancellor@gmail.comSigned-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns: ../drivers/scsi/aic7xxx/aic7xxx_core.c:2317:5: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if ((syncrate->sxfr_u2 & ST_SXFR) != 0) ^ ../drivers/scsi/aic7xxx/aic7xxx_core.c:2310:4: note: previous statement is here if (syncrate == &ahc_syncrates[maxsync]) ^ 1 warning generated. This warning occurs because there is a space amongst the tabs on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. This has been a problem since the beginning of git history hence no fixes tag. Link: https://github.com/ClangBuiltLinux/linux/issues/817 Link: https://lore.kernel.org/r/20191218014220.52746-1-natechancellor@gmail.comSigned-off-by: -
Nathan Chancellor authored
Clang warns: ../drivers/scsi/qla4xxx/ql4_os.c:4148:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (ha->fw_dump) ^ ../drivers/scsi/qla4xxx/ql4_os.c:4144:2: note: previous statement is here if (ha->queues) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 068237c8 ("[SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure") Link: https://github.com/ClangBuiltLinux/linux/issues/819 Link: https://lore.kernel.org/r/20191218015252.20890-1-natechancellor@gmail.comAcked-by:Manish Rangankar <mrangankar@marvell.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Aditya Pakki authored
In ft_recv_write_data(), the pointer ep is dereferenced first and then asserts for NULL. The patch removes the unnecessary assertion. Link: https://lore.kernel.org/r/20191217212214.30722-1-pakki001@umn.eduReviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Chen Zhou authored
Fix sparse warning: drivers/scsi/initio.c:1643:5: warning: symbol 'initio_state_7' was not declared. Should it be static? Link: https://lore.kernel.org/r/20191217134309.41649-1-chenzhou10@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
-
Chen Zhou authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function ibmvscsis_send_messages: drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1888:19: warning: variable iue set but not used [-Wunused-but-set-variable] drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function ibmvscsis_queue_data_in: drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3806:8: warning: variable sd set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20191213064042.161840-1-chenzhou10@huawei.comReported-by:
-
Chen Zhou authored
Fix the typo "GPOI" -> "GPIO" in comment. Link: https://lore.kernel.org/r/20191212023556.72618-1-chenzhou10@huawei.comSigned-off-by:
-
Bart Van Assche authored
This patch fixes the following compiler warning: In file included from drivers/scsi/scsi_error.c:46: drivers/scsi/scsi_error.c: In function 'scsi_eh_target_reset': drivers/scsi/scsi_logging.h:65:81: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] 65 | LOGGING(SCSI_LOG_ERROR_SHIFT, SCSI_LOG_ERROR_BITS, LEVEL,CMD); | ^ drivers/scsi/scsi_error.c:1562:4: note: in expansion of macro 'SCSI_LOG_ERROR_RECOVERY' 1562 | SCSI_LOG_ERROR_RECOVERY(3, | ^~~~~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20191209174205.190025-1-bvanassche@acm.orgSigned-off-by:Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Sheeba B authored
Attach power off hook to Cadence UFS driver. Link: https://lore.kernel.org/r/1576491432-631-1-git-send-email-sheebab@cadence.comReviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
Sheeba B <sheebab@cadence.com> Signed-off-by:
-
Stanley Chu authored
Similar to suspend, ufshcd interrupt can be disabled since there won't be any host controller transaction expected till clocks ungated. Link: https://lore.kernel.org/r/1575721321-8071-3-git-send-email-stanley.chu@mediatek.comReviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Stanley Chu authored
During suspend flow, interrupt shall be disabled before disabling clocks to avoid potential system hang due to accessing host registers after host clocks are disabled. For example, if an interrupt comes with IRQF_IRQPOLL flag configured with the misrouted interrupt recovery feature enabled, ufshcd ISR may be triggered even if nothing shall be done for UFS. In this case, system hang may happen if UFS interrupt status register is accessed with host clocks disabled. Link: https://lore.kernel.org/r/1575721321-8071-2-git-send-email-stanley.chu@mediatek.comReviewed-by:
-
Dan Carpenter authored
We know that "check_for_bkops" is non-zero on this side of the || because it was checked on the other side. Link: https://lore.kernel.org/r/20191213104935.wgpq2epaz6zh5zus@kili.mountainReviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
We introduced a few new error paths, but we can't return directly, we first have to unlock "hba->clk_scaling_lock" first. Fixes: a276c19e3e98 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts") Link: https://lore.kernel.org/r/20191213104828.7i64cpoof26rc4fw@kili.mountainReviewed-by: -
Sheeba B authored
Backup L4 attributes duirng manual hibern8 entry and restore the L4 attributes on manual hibern8 exit as per JESD220C. Link: https://lore.kernel.org/r/1575606303-10917-1-git-send-email-sheebab@cadence.comReviewed-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Bean Huo authored
Delete unused structure field tr in structure utp_upiu_req, since no person uses it for task management. Fixes: df032bf2 ("scsi: ufs: Add a bsg endpoint that supports UPIUs") Link: https://lore.kernel.org/r/20191205220912.5696-1-huobean@gmail.comReviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Can Guo authored
Since ufshcd irq resource is allocated with the device resource management aware IRQ request implementation, we don't really need to free up irq during suspend, disabling it during suspend and reenabling it during resume should be good enough. Link: https://lore.kernel.org/r/0101016ed3d69793-22918f99-23bf-495d-8a36-a9c108d1cbce-000000@us-west-2.amazonses.comReviewed-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
-
Can Guo authored
During power mode change, PACP_PWR_Req frame sends PAPowerModeUserData parameters (and they are considered valid by device if Flags[4] - UserDataValid bit is set in the same frame). Currently we don't set these PAPowerModeUserData parameters and hardware always sets UserDataValid bit which would clear all the DL layer timeout values of the peer device after the power mode change. This change sets the PAPowerModeUserData[0..5] to UniPro specification recommended default values, in addition we are also setting the relevant DME_LOCAL_* timer attributes as required by UFS HCI specification. Link: https://lore.kernel.org/r/0101016ed3d688a4-cfaeb1c9-238b-46c4-9c89-d48c410ba325-000000@us-west-2.amazonses.comReviewed-by:
-
Can Guo authored
In queuecommand path, if DMA map fails, it bails out with clock held. In this case, release the clock to keep its usage paired. [mkp: applied by hand] Link: https://lore.kernel.org/r/0101016ed3d66395-1b7e7fce-b74d-42ca-a88a-4db78b795d3b-000000@us-west-2.amazonses.comReviewed-by:
-
Can Guo authored
UFS standard requires DBD field to be set to 1 in MODE SENSE(10). Some card vendors are more strict and check the DBD field, hence respond with CHECK_CONDITION (Sense key set to ILLEGAL_REQUEST and ASC set to INVALID FIELD IN CDB). When host sends MODE SENSE for page caching, as a result of the CHECK_CONDITION response, host assumes that the device doesn't support the cache feature and doesn't send SYNCHRONIZE_CACHE commands to flush the device cache. This can result in data corruption in case of sudden power down when there is data stored in the device cache. This patch fixes the DBD field setting as required in UFS standard. Link: https://lore.kernel.org/r/0101016ed3d657e4-32a6dd52-1505-4312-97ff-2bd3bee59eb7-000000@us-west-2.amazonses.comReviewed-by:
-
Can Guo authored
UFS JEDEC standards require DBD field to be set to 1 in mode sense command. This patch allows LLD to define the setting of DBD, if required. Link: https://lore.kernel.org/r/0101016ed3d643f9-ffd45d6c-c593-4a13-a18f-a32da3d3bb97-000000@us-west-2.amazonses.comReviewed-by:
-
Can Guo authored
In UFS host reset and restore path, before probe, we stop and start the host controller once. After host controller is stopped, the pending requests, if any, are cleared from the doorbell, but no completion IRQ would be raised due to the hba is stopped. These pending requests shall be completed along with the first NOP_OUT command (as it is the first command which can raise a transfer completion IRQ) sent during probe. Since the OCSs of these pending requests are not SUCCESS (because they are not yet literally finished), their UPIUs shall be dumped. When there are multiple pending requests, the UPIU dump can be overwhelming and may lead to stability issues because it is in atomic context. Therefore, before probe, complete these pending requests right after host controller is stopped and silence the UPIU dump from them. Link: https://lore.kernel.org/r/1574751214-8321-5-git-send-email-cang@qti.qualcomm.comReviewed-by:
-
Can Guo authored
To be on the safe side, do not touch lrb after clearing its slot in the lrb_in_use bitmap to avoid messing up the next task which would possibly occupy this lrb. [mkp: applied by hand] Link: https://lore.kernel.org/r/1574751214-8321-4-git-send-email-cang@qti.qualcomm.com Reviewed by: Avri Altman <avri.altman@wdc.com> Reviewed-by:
-
Can Guo authored
Per UFS 3.0 JEDEC standard, the VCCQ2 min voltage is 1.7v and the VCCQ voltage range is 1.14v ~ 1.26v. Update their hard codes accordingly to make sure they work in a safe range compliant for ver 1.0/1.1/2.0/2.1/3.0 UFS devices. Link: https://lore.kernel.org/r/1574751214-8321-3-git-send-email-cang@qti.qualcomm.comReviewed-by:
-
Asutosh Das authored
bkops level should be rechecked upon receiving an exception. Currently the level is being cached and never updated. Update bkops each time the level is checked. Also do not use the cached bkops level value if it is disabled and then enabled. Fixes: afdfff59 (scsi: ufs: handle non spec compliant bkops behaviour by device) Link: https://lore.kernel.org/r/1574751214-8321-2-git-send-email-cang@qti.qualcomm.comReviewed-by:
-
Bart Van Assche authored
Manage TMF tags with blk_{get,put}_request() instead of ufshcd_get_tm_free_slot() / ufshcd_put_tm_slot(). Store a per-request completion pointer in request.end_io_data instead of using a waitqueue to report TMF completion. Cc: Can Guo <cang@codeaurora.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191209181309.196233-3-bvanassche@acm.orgTested-by: -
Bart Van Assche authored
Instead of tracking which tags are in use in the ufs_hba.lrb_in_use bitmask, rely on the block layer tag allocation mechanism. This patch removes the following busy-waiting loop if ufshcd_issue_devman_upiu_cmd() and the block layer accidentally allocate the same tag for a SCSI request: * ufshcd_queuecommand() returns SCSI_MLQUEUE_HOST_BUSY. * The SCSI core requeues the SCSI command. Cc: Can Guo <cang@codeaurora.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191209181309.196233-2-bvanassche@acm.orgTested-by:
-
Kars de Jong authored
The FSC (NCR53CF9x-2 / SYM53CF9x-2) has a different family code than QLogic or Emulex parts. This caused it to be detected as a FAS100A. Unforunately, this meant the configuration of the CONFIG3 register was incorrect. This causes data transfer issues with FAST-SCSI targets. The FSC also has the CONFIG4 register. It can be used to enable a feature called Active Negation which should always be enabled according to the data manual. Link: https://lore.kernel.org/r/20191119202021.28720-3-jongk@linux-m68k.orgReviewed-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Kars de Jong <jongk@linux-m68k.org> Signed-off-by:
-
Kars de Jong authored
The order of the definitions in the esp_rev enum is important. The values are used in comparisons for chip features. Add a comment to the enum explaining this. Also, the actual values for the enum fields are irrelevant, so remove the explicit values (suggested by Geert Uytterhoeven). This makes adding a new field in the middle of the enum easier. Finally, move the PCSCSI definition to the right place in the enum. In its previous location, at the end of the enum, the wrong values are written to the CONFIG3 register when used with FAST-SCSI targets. Link: https://lore.kernel.org/r/20191119202021.28720-2-jongk@linux-m68k.orgSigned-off-by:
-
- 15 Dec, 2019 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "A small collection of -rc fixes. Mostly. One API addition, but that's because we wanted to use it in a fix. There's also a bug fix that is going to render the 5.5 kernel's soft-RoCE driver incompatible with all soft-RoCE versions prior, but it's required to actually implement the protocol according to the RoCE spec and required in order for the soft-RoCE driver to be able to successfully work with actual RoCE hardware. Summary: - Update Steve Wise info - Fix for soft-RoCE crc calculations (will break back compatibility, but only with the soft-RoCE driver, which has had this bug since it was introduced and it is an on-the-wire bug, but will make soft-RoCE fully compatible with real RoCE hardware) - cma init fixup - counters oops fix - fix for mlx4 init/teardown sequence - fix for mkx5 steering rules - introduce a cleanup API, which isn't a fix, but we want to use it in the next fix - fix for mlx5 memory management that uses API in previous patch" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Fix device memory flows IB/core: Introduce rdma_user_mmap_entry_insert_range() API IB/mlx5: Fix steering rule of drop and count IB/mlx4: Follow mirror sequence of device add during device removal RDMA/counter: Prevent auto-binding a QP which are not tracked with res rxe: correctly calculate iCRC for unaligned payloads Update mailmap info for Steve Wise RDMA/cma: add missed unregister_pernet_subsys in init failure
-
