Fairly pointless coding-style cleanups which I've been sitting on for ages.
The ramdisk driver is still buggy: it drops pagecache when unmounted.  I
still need to fix this.

Apparently it also displays data corruption under load even when not
unmounted.

Correct the cache setup bits for the 5407. This enables the write
buffers properly (despite what the previous comment said). This
combined with fixed cache flushing code provides a nice performance
boost on the 5407.

Also fix the ROMfs setup to only move the ROMfs region if it is actually
configured.

Added ELF relocation type defines.  These are needed by the module
loading code for m68knommu.

This adds the configuration option to enable the uClinux shared flat
binary support.  The code support is already in the binfmt_load code,
just the config option is missing.

Fix a number of memory leaks in the uClinux binfmt_flat loader.  All are
related to not cleaning up properly on failure conditions.

From: Janet Morgan <janetmor@us.ibm.com>

It looks like aio_nr and aio_max_nr were intended to be sysctl parameters.

From: Christoph Hellwig <hch@lst.de>

I've just grepped over the tree for reamining MOD_INC_USE_COUNT users, and
ftape is a really horrible one, it relies on MOD_{INC,DEV}_USE_COUNT in the
most horrible places + it's own bookkepping and the <= 2.4 may unload
hooks.  And although I don't have the hardware I can guarantee it doesn't
work as expected.

So let's just remove the module_exit handler and mark it unremovable, if
someone wants to fix up ftape later it's fine with me, but it's a really
scary driver..

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch that adds C99 initializers to the file.

From: Matt Domsch <Matt_Domsch@dell.com>

Patch below applies to both 2.4.25 and 2.6.3, and replaces the public
domain statement and non-warranty with the GPL, as is permitted by the code
being in the public domain, and is done with legal advice.

From: Gerd Knorr <kraxel@bytesex.org>

"options tuner type=2" is just there for historical reasons and should
only be used/needed if the main driver doesn't allow to configure the
tuner type.  I'm not sure whenever I can remove that altogether without
breaking anything.  There are several users of the tuner module, some
outside the standard kernel tree ...

> >         if (type < TUNERS) {
> > +               t->type = type;
> >                 printk("tuner: type forced to %d (%s) [insmod]\n",
> >                        t->type,tuners[t->type].name);
> >                 set_type(client,type);

That is wrong, it will break in other corner cases, it may cause the
set_type() function not doing the initializations.

The prink can also be dropped because set_type does that too.  The patch
below removes that.  It also makes the kernel messages a bit more verbose
and adds support for two new tuners.

From: mcgrof@studorgs.rutgers.edu (Luis R. Rodriguez)

Complete the migration from Kconfig's undocumented "enable" to "select".

From: Pragnesh Sampat <pragnesh.sampat@timesys.com>

The file initramfs_data.cpio is slightly different when generated on
cygwin, compared to linux, which causes the kernel to panic with the
message "no cpio magic" (See Documentation/early-userspace/README).

The problem in cpio generation is due to the difference in sprintf
modifiers on cygwin.  The code uses "%08ZX" for strlen of a device node.
printf man pages discourages "Z" and has 'z' instead.  Both of these are
not available on cygwin sprintf (at least some versions of cygwin).  The
net result of all of this is that the generated file literally contains
"ZX" and then the strlen after that and messes up that 110 offset etc.  The
file is 516 bytes long on the system that I tested and on linux it is 512
bytes.

The fix below just uses "%08X" for that field.

From: Urban Widmark <urban@teststation.com>

Add the necessary bits for loop-over-smbfs.

From: Michael Frank <mhf@linuxmail.org>

From: "Martin J. Bligh" <mbligh@aracnet.com>

There's no real need to BUG and stop the system from booting if the BIOS
spec'ed apicid for the boot CPU isn't correct - we can continue perfectly
well with the real one.

From: "ZIGLIO, Frediano, VF-IT" <Frediano.Ziglio@vodafone.com>

Add a new driver for the SF16FMR2 Radio card.

From: Martin Hicks <mort@wildopensource.com>

This is a patch based on one that Jack Steiner sent to the ia64 list in
November.  The original thread can be found at:

http://marc.theaimsgroup.com/?l=linux-ia64&m=106869606922555&w=2

I created the little wrapper function that was requested.  I think the only
other arch, other than ia64, that doesn't at least include asm-generic/tlb.h
is arm.


Something appears broken in TLB flushing on IA64 (& possibly other
architectures).  Functionally, it works but performance is bad on systems
with large cpu counts.

The result is that TLB flushing in exit_mmap() is frequently being done via
IPIs to all cpus rather than with a "ptc" instruction or with a new
context..

From: Sam Ravnborg <sam@ravnborg.org>

Corrected check for missing ncurses-devel when executing "make menuconfig".
Now tell user to install 'ncurses-devel' if check fails.

From: Thomas Davis <tadavis@lbl.gov>

Doing a 'make rpm' will fail with the current RH9/Fedora RPM macros.

The failure message is this:

Processing files: kernel-debuginfo-2.6.3rc1mm1-12
error: Could not open %files file /usr/src/redhat/BUILD/kernel-2.6.3rc1mm1/debugfiles.list: No such file or directory

The fix is this patch:

From: Christophe Saout <christophe@saout.de>

Adds a crypto module for device-mapper.  The intent here is to remove
cryptoloop ASAP, to pull the remapping gunk out of the loops driver and to
migrate people onto dm-crypt.  It is on-disk compatible with existing
cryptolop installations.

See http://www.saout.de/misc/dm-crypt/ for usage details.

From: Andi Kleen <ak@suse.de>

Make the "hm, page reserved twice" message dependent on CONFIG_DEBUG_BOOTMEM.

From: Willem Riede <wrlk@riede.org>


The onstream drives, be they scsi, atapi, ieee1394 or usb, are supported by the
osst driver.  When the drives were new, code was introduced in ide-tape
independently, but never really maintained since.  There are issues with the
drives I found and dealt with in osst, that ide-tape doesn't address.

So this code in ide-tape is both redundant and imperfect.  I assumed from
http://marc.theaimsgroup.com/?l=linux-kernel&m=107550547613846&w=2 that there
was buy in for removing it.

When this patch is applied, ide-tape will refuse to attach to an onstream DI
drive, and will write to syslog to use ide-scsi + osst instead.

From: BlaisorBlade <blaisorblade_spam@yahoo.it>

An exhausted do_swap_page() should return VM_FAULT_OOM rather than -ENOMEM.

From: "David S. Miller" <davem@redhat.com>

From: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

If I create some kmem cache on 64-bit with like 3 u32's in it, it should
silently just work and not warn.

From: Davide Libenzi <davidel@xmailserver.org>

A potential race can happen in epoll_ctl(EPOLL_CTL_MOD) where an event can
happen in between f_op->poll() and the lock on ep->lock (we cannot call
f_op->poll() inside a lock, and the f_op->poll() callback does not carry
any info at the current time - missing wake_up_info() already ;).  In that
case the event would be removed.  We can easily leave the event inside the
ready list and have the ep_send_events() logic do the job for us at later
time.  (Thanks to david.lee@teracruz.com for reporting the thing, since it
shouldn't have been a nice one ;)

From: Anton Blanchard <anton@samba.org>

Add clock_was_set to all architectures.  I'm disappointed this wasnt done by
whoever wrote the code.

(It is a callback which the arch-specific RTC-updating code must make when
someone sets the time).

From: Brian Gerst <bgerst@didntduck.org>

Cleans up some leftovers from the old module loader:

- Remove unused defines from modules.h

- Remove unused file modsetver.h

From: Alex Goddard <agoddard@purdue.edu>

How to debug module loading problems.  The wording is a slightly changed
version of what Rusty said.

From: MAEDA Naoaki <maeda.naoaki@jp.fujitsu.com>

I am testing PCI hot-plug in 2.6.2 kernel, but sometimes a struct resource
tree in kernel/resource.c was broken if multiple hot-plug requests are
issued at the same time.

The reason is lots of drivers call release_region() on hot removal, and
__release_region(), which is invoked by release_region() macro, changes the
tree without holding a writer lock for resource_lock.

I think __release_region() must hold a writer lock as well as
__request_region() does.

A following patch fixes the issue in my environment.

From: Tim Hockin <thockin@sun.com>

Remove the max_anon via dynamically allocation.  We also change the
idr_pre_get() interface to take a gfp mask, which should have always been
there.

From: Philippe Elie <phil.el@wanadoo.fr>

From: Will Cohen <wcohen@redhat.com>

Add oprofile support for Pentium Mobile (P6 core).  Pentium Mobile needs to
unmask LVPTC vector, since it doesn't hurt other P6 core based cpus we do
it unconditionally for all these.

This patch require userspace tools >= 0.8 (only in sourceforge cvs currently)

From: Philippe Elie <phil.el@wanadoo.fr>

From: Zwane Mwaikambo <zwane@arm.linux.org.uk>

This patch adds infrastructure code and enables ARM to utilise the timer
int oprofile driver.  There is PMU code under development for the XScale
but that is still forthcoming.  In the meantime you can use the timer int
driver with an updated Oprofile-CVS userspace (SF is a bit slow, please
allow 24hrs).

From: Philippe Elie <phil.el@wanadoo.fr>

From: Zwane Mwaikambo <zwane@arm.linux.org.uk>

The nmi_timer_int oprofile driver was enabling itself unconditionally if an
SMP kernel was being used on a UP system without an IOAPIC.

Tested on a P5 using NMI timer int driver and UP system using timer int
driver both running an SMP kernel.

2004-02-11  Zwane Mwaikambo <zwane@arm.linux.org.uk>

	* arch/i386/kernel/nmi.c: export nmi_active
	* arch/i386/oprofile/nmi_timer_int.c: use it to check if owe can use
	  an nmi interrupt

Some machines appear to have BIOS problems which are causing 3c59x adapters
to come up in a powered-off state when WOL and PM are enabled.

So bring back the 2.4 `enable_wol' module option which disables wake-on-lan
unless the user specifically asked for it.

From: Arjan van de Ven <arjanv@redhat.com>

I have 4Kb stacks + IRQ stacks working in my tree.  The biggest part of the
4K-stacks work is changing hardcoded 8Kb assumptions to the proper,
pre-existing define for this.  That part of the patch is appropriate in
general, even when 4Kb stacks might not be.

The recent change to /proc/partitions which prevents it from displaying
removeable media accidentally caused 128 NBD and 16 ramdisk partitions to
appear in /proc/partitions instead.

So add a specific gendisk flag which says "don't show me in /proc/partitions"
and use that.

From: Christoph Hellwig <hch@lst.de>

Don't try to display the per-cpu information for CPUs which aren't there.

From: Neil Brown <neilb@cse.unsw.edu.au>,

From: Miquel van Smoorenburg <miquels@cistron.nl>

While I was stress-testing NFS/XFS on 2.6.1/2.6.2-rc, I found that
sometimes my "dd" would exit with:

	#  dd if=/dev/zero bs=4096 > /mnt/file
	dd: writing `standard output': Invalid argument
	1100753+0 records in
	1100752+0 records out

After adding some debug printk's to the server and client code and some
tcpdump-ing, I found that the NFSERR_INVAL was returned by nfsd_commit on
the server.

Turns out that the "offset" argument is off_t instead of loff_t.  It isn't
used at all (unfortunately), but it _is_ checked for sanity, so that's
where the error came from.

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

I falled again on the crash in con_do_write() with driver->data beeing
NULL.  It happens during boot, when userland is playing open/close games
with tty's, I was intentionally typing keys like mad during boot trying to
trigger another problem when this one poped up.

Looking at the code, I'm not sure how protected we are by the above (tty)
layer, paulus told me to not rely on anything like locking coming from
there, so I decided to extend the scope of the console semaphore one more
bit to cover races between calls to con_open, con_close and con_write.
Note that in con_do_write, I intentionally drop the semaphore to avoid
keeping it held when waiting on the local buffer, and I added some sanity
checks on tty->driver_data with some printk's in case we still have an open
race by the tty layer.  At least, now, the couple vc_allocated &
tty->driver_data should be protected though.

From: Kingsley Cheung <kingsley@aurema.com>

Is is possible to examine the data of tasks currently existing in the system
which are not threads of the same thread group.

For example, the only task in the group where init is group leader is itself:

gen2 02:50:44 ~: ls /proc/1/task
1

However, I can then read the contents of 'stat' for any other task in the
system:

gen2 02:49:45 ~: cat /proc/1/task/$$/stat
1669 (bash) S 1668 1669 1669 34816 1730 256 1480 6479 12 4 8 5 5 17 15 0 1 0
+8065 3252224 451 4294967295 134512640 134955932 3221225104 3221222840
+4294960144 0 65536 3686404 1266761467 3222442959 0 0 17 0 0 0

I had a look at fs/proc/base.c and found that the 'lookup' functions for
these directories were checking that the task in question existed, but
overlooked the following:

1.  In the function proc_pid_lookup, a check is required to ensure that
    the task in question is a thread group leader.  Without the check, any
    task can have its data retrieved accordingly.  Consider the following.
    There is a multithreaded process 1777.

gen2 23:22:47 /proc/1777: ls task
1777  1778  1779  1780  1781  1782  1783  1784  1785  1786  1787  1788

However, I can read the stat file for its thread 1778 as follows:

gen2 23:22:50 /proc/1777: cat /proc/1778/stat
1778 (multithreadtest) T 1777 1777 1672 34816 1672 64 0 0 0 0 14 17 0 0 15 0 12 0 8871 24727552 104 4294967295 134512640 134515104 3221222496 1077365276 4294960144 0 0 0 0 3222479248 0 0 -1 1 0 0

But 1778 is not meant to show up in /proc/, as intended right?:

gen2 23:22:56 /proc/1777: ls /proc/
1     1365  1661  1793  881        dma          kcore       scsi
10    1371  1662  18    9          driver       kmsg        self
1014  1372  1663  2     909        execdomains  loadavg     slabinfo
1032  14    1664  3     963        fb           locks       stat
1062  15    1665  4     966        filesystems  mdstat      swaps
1066  16    1666  5     buddyinfo  fs           meminfo     sys
1067  1605  1669  6     bus        ide          misc        sysrq-trigger
1087  1610  1670  7     cmdline    interrupts   modules     sysvipc
1095  1611  1671  736   cpuinfo    iomem        mounts      tty
11    1641  1672  8     crypto     ioports      mtrr        uptime
12    1658  17    807   devices    irq          net         version
13    1660  1777  810   diskstats  kallsyms     partitions  vmstat

2.  The other part of the bug is in the function proc_task_lookup.  Here
    there needs to be a check that the task X is indeed a thread of the
    thread group Y when we read /proc/<Y>/task/<X>.

Right now, this check does not exist, which allows for any existing
task to have its data read from another thread group directory.  The
following reads the stat directory of my bash shell from the thread
group 1.

gen2 23:28:07 ~: cd /proc/1
gen2 23:28:10 /proc/1: ls
auxv     cwd      exe  maps  mounts  stat   status  wchan
cmdline  environ  fd   mem   root    statm  task
gen2 23:28:11 /proc/1: ls task
1
gen2 23:28:27 /proc/1: cat task/$$/stat
1671 (bash) S 1670 1671 1671 34817 1802 256 1953 8101 12 4 10 6 9 26 15 0 1 0 5789 3252224 454 4294967295 134512640 134955932 3221225104 3221222840 4294960144 0 65536 3686404 1266761467 3222442959 0 0 17 0 0 0