- 27 Sep, 2020 32 commits
-
-
Nicolas Dufresne authored
As per spec, the CAPTURE resolution should be automatically set based on the OUTPUT resolution. This patch properly propagate width/height to the capture when the OUTPUT format is set and override the user provided width/height with configured OUTPUT resolution when the CAPTURE fmt is updated. This also prevents userspace from selecting a CAPTURE resolution that is too small, avoiding kernel oops. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
Add the files: Documentation/admin-guide/media/rkisp1.rst Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst to the Rockchip ISP driver entry in the MAINTAINERS file. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
Add the file 'rkisp1.rst' that documents the rkisp1 driver. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
The metadata formats V4L2_META_FMT_RK_ISP1_PARAMS, V4L2_META_FMT_RK_ISP1_STAT_3A are currently described in two files under drivers/staging/media/rkisp1/Documentation/media/uapi/v4l This patch moves the description to one file: Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst The patch also extends the description and adds the rst file to toctree. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
This patch changes the device configuration to support capture of V4L2_PIX_FMT_GREY video. The 'write_format' field of the format description should be planar. Also the array 'pixm->plane_fmt' that describes the planes should be memset to 0 before filling it since the the cb, cr planes should be 0. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
The capture has a mapping of the mbus code needed for each pixelformat. This can be used to simplify the link validation by comparing the mbus code in the capture with the code in the resizer. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
Add support to more YUV encoded media bus formats on the resizer's source pad. The patch defines an array rkisp1_rsz_yuv_formats[] with the list of supported YUV media bus formats and their {hv}div values. The {hv}div are used in the function 'rkisp1_rsz_config' instead of the macros RKISP1_MBUS_FMT_(HV)DIV, and instead of checking the capture format. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
Currently the resizer outputs the same media bus format as the input. This is wrong since the resizer is also used to downscale YUV formats. This patch changes the enumeration of the supported formats. The supported formats on the sink pad should be taken from the isp entity and the supported formats on the source pad should be taken from the capture entity. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
Add a function 'rkisp1_cap_enum_mbus_codes' that receive a pointer to 'v4l2_subdev_mbus_code_enum' and returns the next supported mbus format of the capture. The function assumes that pixel formats with identical 'mbus' are grouped together in the hardcoded arrays, therefore the order of the entries in the array 'rkisp1_sp_fmts' are adjusted. This function is a helper for the media bus enumeration of the source pad of the resizer entity. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
The capture devices supports YUV, RGB, and Bayer formats. Adding V4L2_CAP_IO_MC capability will reflect userspace what format should be set on the resizer in order to stream each of the video formats. The patch adds a 'mbus' field to the struct 'rkisp1_capture_fmt_cfg' which maps the video format to the needed mbus format. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
The selfpath capture does not support bayer formats. Therefore there is no reason to support bayer formats on the selfpath resizer. The selfpath resizer should support only MEDIA_BUS_FMT_YUYV8_2X8. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
It is not clear if the device is able to support format V4L2_PIX_FMT_YUV444M so remove it. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
For Ycbcr packed formats only YUYV can be supported by the driver. This patch removes the other formats. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
According to the TRM [1], the YUV->RGB conversion outputs RGB 888 format with 4 bytes, where the last byte is ignored, using big endian representation: |___X___|___R___|___G___|___B___| 31 24 16 8 0 Which matches format V4L2_PIX_FMT_XBGR32 in little endian representation, so replace it accordingly. "24 bit word". What it means is that 4 bytes are used with 24bit for the RGB and the last byte is ignored. This matches format V4L2_PIX_FMT_XBGR32. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Aditya Pakki authored
delta_run_work() calls delta_get_sync() that increments the reference counter. In case of failure, decrement the reference count by calling delta_put_autosuspend(). Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. And also, when the call of function vpe_runtime_get() failed, we won't call vpe_runtime_put(). Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails inside vpe_runtime_get(). Fixes: 45719127 ("[media] v4l: ti-vpe: Add VPE mem to mem driver") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Thus replace the jump target "err_release_buffers" by "err_pm_putw". Fixes: 152e0bf6 ("media: stm32-dcmi: add power saving support") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Fixes: c5086f13 ("[media] s5p-mfc: Use clock gating only on MFC v5 hardware") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if PM runtime put is not called in error handling paths. Thus call pm_runtime_put_sync() if pm_runtime_get_sync() fails. Fixes: 02afa816 ("media: camss: Add basic runtime PM support") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Fixes: 6eaafbdb ("[media] v4l: rcar-fcp: Keep the coding style consistent") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Fixes: f7e7b48e ("[media] rockchip/rga: v4l2 m2m support") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Fixes: 2a18fbec ("media: rcar-vin: Move pm_runtime_{get,put} out of helpers") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Fixes: 90dedce9 ("media: rcar-vin: add function to manipulate Gen3 chsel value") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dinghao Liu authored
When coda_firmware_request() returns an error code, a pairing runtime PM usage counter decrement is needed to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Also, call pm_runtime_disable() when pm_runtime_get_sync() returns an error code. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
- 26 Sep, 2020 8 commits
-
-
Lad Prabhakar authored
Enable YDS bit if bus_width and data_shift is set to 8 in parallel mode for MEDIA_BUS_FMT_UYVY8_2X8 format. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Lad Prabhakar authored
Add the SoC specific information for RZ/G2H (R8A774E1) SoC. Also add the routing information between CSI2 and VIN (which is similar to R-Car H3 except it lacks CSI41). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Lad Prabhakar authored
Add the MIPI CSI-2 driver support for RZ/G2H (R8A774E1) SoC. The CSI-2 module of RZ/G2H is similar to R-Car H3. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Lad Prabhakar authored
Document support for the VIN module in the Renesas RZ/G2H (R8A774E1) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Lad Prabhakar authored
Add the compatible string for RZ/G2H (R8A774E1) to the list of supported SoCs. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Xiaolong Huang authored
In bttv_probe if some functions such as pci_enable_device, pci_set_dma_mask and request_mem_region fails the allocated memory for btv should be released. Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Vaibhav Gupta authored
With the support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. The required operations are done by PCI core. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Lad Prabhakar authored
The rcar-vin driver also supports RZ/G{1,2} SoC's, update the description to reflect this. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-