Change the return type of "if (!bank || type == ACA_HWIP_TYPE_UNKNOW)"
to be bool instead of int.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_aca.c:185 aca_bank_hwip_is_matched() warn: signedness bug returning '(-22)'

Fixes: f5e4cc84 ("drm/amdgpu: implement RAS ACA driver framework")
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch
the limit from firmware instead of using cached values.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Replace [1] with [].  Silences UBSAN warnings.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039926Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 5f38ac54.
This causes issues with rebooting and the 7800XT.

Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: stable@vger.kernel.org
Fixes: 5f38ac54 ("drm/amd/pm: fix the high voltage and temperature issue")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3062Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Color caps changed between HW versions, which caused the DCN10 color
state sections in the DTN log to no longer match DCN2+ state. Create a
color state log specific to DCN2.0 and hook it up to DCN2 family
drivers. Instead of reading gamut remap reg values, display gamut remap
matrix data in fixed 31.32.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add color caps information for DPP and MPC block to show HW color caps.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Address kdoc for eDP Panel Replay feature in 'amdgpu_dm_crtc_set_panel_sr_feature()'

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_crtc.c:100: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * The DRM vblank counter enable/disable action is used as the trigger
   to enable

Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Color caps changed between HW versions, which caused the DCN10 color
state sections in the DTN log to no longer match DCN3+ state. Create a
color state log specific to DCN3.0 and hook it up to DCN3.0+ and DCN3.1+
drivers.

rfc-v2:
- detail RAM mode for gamcor and blnd gamma blocks
- add MPC gamut remap matrix log

v3:
- read MPC gamut remap matrix in fixed 31.32 format
- extend to DCN3.0+ and DCN3.1+ drivers (Harry)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_reg_state_sysfs_fini could be invoked at the
time when asic_func is even not initialized, i.e.,
amdgpu_discovery_init fails for some reason.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

skip call ras_late_init callback if ras block is not supported.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Ony if vram vendor info is available, show in sysfs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For GFX 9.4.3 APUs, the current method of fetching vram vendor
information is not reliable. Avoid fetching the information.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

update the power cap setting for smu_v13.0.0/smu_v13.0.7

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2356Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The power source flag should be updated when
[1] System receives an interrupt indicating that the power source
has changed.
[2] System resumes from suspend or runtime suspend
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- FW Release 0.0.201.0
- Fix resizing video window for dcn321
- Fix timing bandwidth calculation for HDMI
- Fix null-deref in dml2 assigned pipe search
- Add GART memory support for dmcub
- Add power_state and pme_pending flag
- Add usb4_bw_alloc_support flag
- Revert "Rework DC Z10 restore
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

 - Add debug flag for Replay IPS visual confirm
 - Remove unused debug flags that should not
   be controlled inside Replay FSM
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Because ABM will wait VStart to start getting histogram data,
 it will cause we can't enter IPS while full screnn video playing.

[How]
Modify the panel refresh rate to the maximun multiple of current
 refresh rate.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
It has been found a regression caused by enabling this feature during ODM to
MPC combine switch when user is resizing video window. The transition is
only needed when the feature is enabled. During the transition driver will
temporary switch to use max dppclk level through SMU set hard min interface.
The interface times out and fail to configure the max dpp clock level, which caused
system issue as the desired clock can't be set. We will continue investigating
the issue and root cause the issue where max dppclk level can't be reached.
But for now we have to disable this feature as this feature will cause us to hit this
problem in common use cases during video playback unfortunately. The issue
is dcn321 specific so it won't impact other dcn revisions.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
In dump file, GART memory can be accessed while frame buffer cannot.

[How]
Add GART memory support for dmcub.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit e6f82bd4.

It caused intermittent hangs when enabling IPS on static screen.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[what]
Adding power_state to dc.h and pme_pending flag to clk_mgr_internal.h
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
With IPS enabled a system hangs once PSR is active.
PSR active triggers transition to IPS2 state.
While in IPS2 an access to dcn registers results in hard hang.
Existing check doesn't cover for PSR sequence.

[How]
Safeguard register access by disabling idle optimization in atomic commit
and crtc scanout. It will be re-enabled on next vblank.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
NULL-deref regression after:
"drm/amd/display: Fix dml2 assigned pipe search"

[How]
Add verification for potential NULLs

Fixes: d451b534 ("drm/amd/display: Fix dml2 assigned pipe search")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
dc should have a flag for DM to enable usb4_bw_alloc in dptx

[How]
- Add usb4_bw_alloc_support flag in dc_config
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Logging DCN3 MPC state was following DCN1 implementation that doesn't
consider new DCN3 MPC color blocks. Create new elements according to
DCN3 MPC color caps and a new DCN3-specific function for reading MPC
data.

v3:
- remove gamut remap reg reading in favor of fixed31_32 matrix data
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why && How]
The current bandwidth calculation for timing doesn't account for
certain HDMI modes overhead which leads to DSC can't be enabled.
Add support to calculate the actual bandwidth for these HDMI modes.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We want to be able to read the MPC's gamut remap matrix similar to
what we do with .dpp_get_gamut_remap functions. On the other hand, we
don't need a hook here because only DCN3+ has the MPC gamut remap
block, being absent in previous families.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DCN3 DPP color state was uncollected and some state elements from DCN1
doesn't fit DCN3. Create new elements according to DCN3 color caps and
fill them up for DTN log output.

rfc-v2:
- fix reading of gamcor and blnd gamma states
- remove gamut remap register in favor of gamut remap matrix reading
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Instead of read gamut remap data from hw values, convert HW register
values (S2D13) into a fixed-point 31.32 matrix for color state log.
Change DCN10 log to print data in the format of the gamut remap matrix.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We want to be able to read the DPP's gamut remap matrix.

v2:
- code-style and doc comments clean-up (Melissa)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prepare to hook up color state log according to the DCN version.

v3:
- put functions in single line (Siqueira)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions

The 'status' variable in 'core_link_read_dpcd()' &
'core_link_write_dpcd()' was uninitialized.

Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'.

Cc: stable@vger.kernel.org
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support page retirement handling in debug mode.

v2: revert smu_v13_0_6_get_ecc_info directly.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 6fe08f56.
We use debug mode flag instead of this interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the below gcc with W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_replay.c:262: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Set REPLAY power optimization flags and coasting vtotal.
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_replay.c:284: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * send Replay general cmd to DMUB.

Fixes: e379787c ("drm/amd/display: Add some functions for Panel Replay")
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:645 amdgpu_gfx_enable_kcq() warn: inconsistent indenting

Cc: Le Ma <Le.Ma@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

update smu v13.0.6 message to allow guest driver set gfx clock.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support retiring multiple MCA error address pages in
one in-band query for umc v12_0.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add interface to check mca umc status.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>