This conditional is missing a bang, with the intent
being to break when the retry count reaches zero.

Fixes: 476d96ca ("ibmvnic: Bound waits for device queries")
Suggested-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

In commit 4b1373de ("net: ipv6: addr: perform strict checks also for
doit handlers") we add strict check for inet6_rtm_getaddr(). But we did
the invalid header values check before checking if NETLINK_F_STRICT_CHK
is set. This may break backwards compatibility if user already set the
ifm->ifa_prefixlen, ifm->ifa_flags, ifm->ifa_scope in their netlink code.

I didn't move the nlmsg_len check because I thought it's a valid check.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 4b1373de ("net: ipv6: addr: perform strict checks also for doit handlers")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

Without I2C, we get a link failure:

drivers/ptp/ptp_clockmatrix.o: In function `idtcm_xfer.isra.3':
ptp_clockmatrix.c:(.text+0xcc): undefined reference to `i2c_transfer'
drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_init':
ptp_clockmatrix.c:(.init.text+0x14): undefined reference to `i2c_register_driver'
drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_exit':
ptp_clockmatrix.c:(.exit.text+0x10): undefined reference to `i2c_del_driver'

Fixes: 3a6ba7dc ("ptp: Add a ptp clock driver for IDT ClockMatrix.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

After executing "ethtool -C eth0 rx-usecs-irq 0", the box becomes
unresponsive, likely due to interrupt livelock.  It appears that
a minimum clamp value for the irq timer is computed, but is never
applied.

Fix by applying the corrected clamp value.

Fixes: 74706afa ("bnxt_en: Update interrupt coalescing logic.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

I no longer work at Savoir-faire Linux but even though MAINTAINERS is
up-to-date, some emails are still sent to my old email address.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

Add myself and Sean as maintainers for rmnet driver.
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

Driver doesn't accommodate the configuration for max number
of multicast mac addresses, in such particular case it leaves
the device with improper/invalid multicast configuration state,
causing connectivity issues (in lacp bonding like scenarios).
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lan78xx driver accesses the PHY registers through MDIO bus over USB
connection. When performing a suspend/resume, the PHY registers can be
accessed before the USB connection is resumed. This will generate an
error and will prevent the device to resume correctly.
This patch adds the dependency between the MDIO bus and USB device to
allow correct handling of suspend/resume.

Fixes: ce85e13a ("lan78xx: Update to use phylib instead of mii_if_info.")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2019-12-11

The following pull-request contains BPF updates for your *net* tree.

We've added 8 non-merge commits during the last 1 day(s) which contain
a total of 10 files changed, 126 insertions(+), 18 deletions(-).

The main changes are:

1) Make BPF trampoline co-exist with ftrace-based tracers, from Alexei.

2) Fix build in minimal configurations, from Arnd.

3) Fix mips, riscv bpf_tail_call limit, from Paul.

4) Fix bpftool segfault, from Toke.

5) Fix samples/bpf, from Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, open() is called from the user program and it calls the syscall
'sys_openat', not the 'sys_open'. This leads to an error of the program
of user side, due to the fact that the counter maps are zero since no
function such 'sys_open' is called.

This commit adds the kernel bpf program which are attached to the
tracepoint 'sys_enter_openat' and 'sys_enter_openat'.

Fixes: 1da236b6 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Previously, when this sample is added, commit 1c47910e
("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and
'sys_write' has been used without no prefixes. But currently there are
no exact symbols with these under kallsyms and this leads to failure.

This commit changes exact compare to substring compare to keep compatible
with exact symbol or prefixed symbol.

Fixes: 1c47910e ("samples/bpf: add perf_event+bpf example")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205080114.19766-2-danieltimlee@gmail.com

Add simple test script to execute funciton graph tracer while BPF trampoline
attaches and detaches from the functions being graph traced.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191209000114.1876138-4-ast@kernel.org

Make BPF trampoline attach its generated assembly code to kernel functions via
register_ftrace_direct() API. It helps ftrace-based tracers co-exist with BPF
trampoline on the same kernel function. It also switches attaching logic from
arch specific text_poke to generic ftrace that is available on many
architectures. text_poke is still necessary for bpf-to-bpf attach and for
bpf_tail_call optimization.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191209000114.1876138-3-ast@kernel.org

When the kptr_restrict sysctl is set, the kernel can fail to return
jited_ksyms or jited_prog_insns, but still have positive values in
nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when
trying to dump the program because it only checks the len fields not
the actual pointers to the instructions and ksyms.

Fix this by adding the missing checks.

Fixes: 71bb428f ("tools: bpf: add bpftool")
Fixes: f84192ee ("tools: bpftool: resolve calls without using imm field")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com

Building with -Werror showed another failure:

kernel/bpf/btf.c: In function 'btf_get_prog_ctx_type.isra.31':
kernel/bpf/btf.c:3508:63: error: array subscript 0 is above array bounds of 'u8[0]' {aka 'unsigned char[0]'} [-Werror=array-bounds]
  ctx_type = btf_type_member(conv_struct) + bpf_ctx_convert_map[prog_type] * 2;

I don't actually understand why the array is empty, but a similar
fix has addressed a related problem, so I suppose we can do the
same thing here.

Fixes: ce27709b ("bpf: Fix build in minimal configurations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210203553.2941035-1-arnd@arndb.de

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in MIPS' JIT compiler to allow
33 tail calls.

Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.com

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls.  I tested it using the above selftest on an emulated
RISCV64.

Fixes: 2353ecc6 ("bpf, riscv: add BPF JIT for RV64G")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com

In netpoll the napi handler could be called with budget equal to zero.
Current ENA napi handler doesn't take that into consideration.

The napi handler handles Rx packets in a do-while loop.
Currently, the budget check happens only after decrementing the
budget, therefore the napi handler, in rare cases, could run over
MAX_INT packets.

In addition to that, this moves all budget related variables to int
calculation and stop mixing u32 to avoid ambiguity

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tuong Lien says:

====================
tipc: fix some issues

This series consists of some bug-fixes for TIPC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function 'tipc_disc_rcv()', the 'msg_peer_net_hash()' is called
to read the header data field but after the message skb has been freed,
that might result in a garbage value...

This commit fixes it by defining a new local variable to store the data
first, just like the other header fields' handling.

Fixes: f73b1281 ("tipc: improve throughput between nodes in netns")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a user message is sent, TIPC will check if the socket has faced a
congestion at link layer. If that happens, it will make a sleep to wait
for the congestion to disappear. This leaves a gap for other users to
take over the socket (e.g. multi threads) since the socket is released
as well. Also, in case of connectionless (e.g. SOCK_RDM), user is free
to send messages to various destinations (e.g. via 'sendto()'), then
the socket's preformatted header has to be updated correspondingly
prior to the actual payload message building.

Unfortunately, the latter action is done before the first action which
causes a condition issue that the destination of a certain message can
be modified incorrectly in the middle, leading to wrong destination
when that message is built. Consequently, when the message is sent to
the link layer, it gets stuck there forever because the peer node will
simply reject it. After a number of retransmission attempts, the link
is eventually taken down and the retransmission failure is reported.

This commit fixes the problem by rearranging the order of actions to
prevent the race condition from occurring, so the message building is
'atomic' and its header will not be modified by anyone.

Fixes: 365ad353 ("tipc: reduce risk of user starvation during link congestion")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit c55c8eda ("tipc: smooth change between replicast and
broadcast"), we allow instant switching between replicast and broadcast
by sending a dummy 'SYN' packet on the last used link to synchronize
packets on the links. The 'SYN' message is an object of link congestion
also, so if that happens, a 'SOCK_WAKEUP' will be scheduled to be sent
back to the socket...
However, in that commit, we simply use the same socket 'cong_link_cnt'
counter for both the 'SYN' & normal payload message sending. Therefore,
if both the replicast & broadcast links are congested, the counter will
be not updated correctly but overwritten by the latter congestion.
Later on, when the 'SOCK_WAKEUP' messages are processed, the counter is
reduced one by one and eventually overflowed. Consequently, further
activities on the socket will only wait for the false congestion signal
to disappear but never been met.

Because sending the 'SYN' message is vital for the mechanism, it should
be done anyway. This commit fixes the issue by marking the message with
an error code e.g. 'TIPC_ERR_NO_PORT', so its sending should not face a
link congestion, there is no need to touch the socket 'cong_link_cnt'
either. In addition, in the event of any error (e.g. -ENOBUFS), we will
purge the entire payload message queue and make a return immediately.

Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current rbtree for service ranges in the name table is built based
on the 'lower' & 'upper' range values resulting in a flaw in the rbtree
searching. Some issues have been observed in case of range overlapping:

Case #1: unable to withdraw a name entry:
After some name services are bound, all of them are withdrawn by user
but one remains in the name table forever. This corrupts the table and
that service becomes dummy i.e. no real port.
E.g.

                /
           {22, 22}
              /
             /
   --->  {10, 50}
           /  \
          /    \
    {10, 30}  {20, 60}

The node {10, 30} cannot be removed since the rbtree searching stops at
the node's ancestor i.e. {10, 50}, so starting from it will never reach
the finding node.

Case #2: failed to send data in some cases:
E.g. Two service ranges: {20, 60}, {10, 50} are bound. The rbtree for
this service will be one of the two cases below depending on the order
of the bindings:

        {20, 60}             {10, 50} <--
          /  \                 /  \
         /    \               /    \
    {10, 50}  NIL <--       NIL  {20, 60}

          (a)                    (b)

Now, try to send some data to service {30}, there will be two results:
(a): Failed, no route to host.
(b): Ok.

The reason is that the rbtree searching will stop at the pointing node
as shown above.

Case #3: Same as case #2b above but if the data sending's scope is
local and the {10, 50} is published by a peer node, then it will result
in 'no route to host' even though the other {20, 60} is for example on
the local node which should be able to get the data.

The issues are actually due to the way we built the rbtree. This commit
fixes it by introducing an additional field to each node - named 'max',
which is the largest 'upper' of that node subtree. The 'max' value for
each subtrees will be propagated correctly whenever a node is inserted/
removed or the tree is rebalanced by the augmented rbtree callbacks.

By this way, we can change the rbtree searching appoarch to solve the
issues above. Another benefit from this is that we can now improve the
searching for a next range matching e.g. in case of multicast, so get
rid of the unneeded looping over all nodes in the tree.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Error recovery fixes.

This patch series contains fixes mostly for the error recovery feature
and related areas.  Please queue the series for -stable also.  Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The VF driver also needs to create the health reporters since
VFs are also involved in firmware reset and recovery.  Modify
bnxt_dl_register() and bnxt_dl_unregister() so that they can
be called by the VFs to register/unregister devlink.  Only the PF
will register the devlink parameters.  With devlink registered,
we can now create the health reporters on the VFs.

Fixes: 6763c779 ("bnxt_en: Add new FW devlink_health_reporter")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the logic to properly check the fw capabilities and create the
devlink health reporters only when needed.  The current code creates
the reporters unconditionally as long as bp->fw_health is valid, and
that's not correct.

Call bnxt_dl_fw_reporters_create() directly from the init and reset
code path instead of from bnxt_dl_register().  This allows the
reporters to be adjusted when capabilities change.  The same
applies to bnxt_dl_fw_reporters_destroy().

Fixes: 6763c779 ("bnxt_en: Add new FW devlink_health_reporter")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After fixing the allocation of bp->fw_health in the previous patch,
the driver will not go through the fw reset and recovery code paths
if bp->fw_health allocation fails.  So we can now remove the
unnecessary NULL checks.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bp->fw_health needs to be allocated for either the firmware initiated
reset feature or the driver initiated error recovery feature.  The
current code is not allocating bp->fw_health for all the necessary cases.
This patch corrects the logic to allocate bp->fw_health correctly when
needed.  If allocation fails, we clear the feature flags.

We also add the the missing kfree(bp->fw_health) when the driver is
unloaded.  If we get an async reset message from the firmware, we also
need to make sure that we have a valid bp->fw_health before proceeding.

Fixes: 07f83d72 ("bnxt_en: Discover firmware error recovery capabilities.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If any change happened in the configuration of VF in VM while
collecting live dump, there could be a race and firmware can return
more data than allocated dump length. Fix it by keeping track of
the accumulated core dump length copied so far and abort the copy
with error code if the next chunk of core dump will exceed the
original dump length.

Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will trigger new context memory to be rediscovered and allocated
during the re-probe process after a firmware reset.  Without this, the
newly reset firmware does not have valid context memory and the driver
will eventually fail to allocate some resources.

Fixes: ec5d31e3 ("bnxt_en: Handle firmware reset status during IF_UP.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The logic needs to check both bp->total_irqs and the reserved IRQs in
hw_resc->resv_irqs if applicable and see if both are enough to cover
the L2 and RDMA requested vectors.  The current code is only checking
bp->total_irqs and can fail in some code paths, such as the TX timeout
code path with the RDMA driver requesting vectors after recovery.  In
this code path, we have not reserved enough MSIX resources for the
RDMA driver yet.

Fixes: 75720e63 ("bnxt_en: Keep track of reserved IRQs.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devm_acpi_dev_add_driver_gpios() returns -ENXIO if CONFIG_ACPI
is disabled (e.g. on device tree platforms).
In this case, nxp-nci will silently fail to probe.

The other NFC drivers only log a debug message if
devm_acpi_dev_add_driver_gpios() fails.
Do the same in nxp-nci to fix this problem.

Fixes: ad0acfd6 ("NFC: nxp-nci: Get rid of code duplication in ->probe()")
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the following command currently fails:

 [root@fedora tc-testing]# ./tdc.py -l
 The following test case IDs are not unique:
 {'6f5e'}
 Please correct them before continuing.

this happens because there are two tests having the same id:

 [root@fedora tc-testing]# grep -r 6f5e tc-tests/*
 tc-tests/actions/pedit.json:        "id": "6f5e",
 tc-tests/filters/basic.json:        "id": "6f5e",

fix it replacing the latest duplicate id with a brand new one:

 [root@fedora tc-testing]# sed -i 's/6f5e//1' tc-tests/filters/basic.json
 [root@fedora tc-testing]# ./tdc.py -i

Fixes: 4717b053 ("tc-testing: Introduced tdc tests for basic filter")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fjes_acpi_add() misses a check for platform_device_register_simple().
Add a check to fix it.

Fixes: 658d439b ("fjes: Introduce FUJITSU Extended Socket Network Device driver")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is softlockup when using TPACKET_V3:
...
NMI watchdog: BUG: soft lockup - CPU#2 stuck for 60010ms!
(__irq_svc) from [<c0558a0c>] (_raw_spin_unlock_irqrestore+0x44/0x54)
(_raw_spin_unlock_irqrestore) from [<c027b7e8>] (mod_timer+0x210/0x25c)
(mod_timer) from [<c0549c30>]
(prb_retire_rx_blk_timer_expired+0x68/0x11c)
(prb_retire_rx_blk_timer_expired) from [<c027a7ac>]
(call_timer_fn+0x90/0x17c)
(call_timer_fn) from [<c027ab6c>] (run_timer_softirq+0x2d4/0x2fc)
(run_timer_softirq) from [<c021eaf4>] (__do_softirq+0x218/0x318)
(__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac)
(irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4)
(msa_irq_exit) from [<c0209cf0>] (handle_IPI+0x650/0x7f4)
(handle_IPI) from [<c02015bc>] (gic_handle_irq+0x108/0x118)
(gic_handle_irq) from [<c0558ee4>] (__irq_usr+0x44/0x5c)
...

If __ethtool_get_link_ksettings() is failed in
prb_calc_retire_blk_tmo(), msec and tmo will be zero, so tov_in_jiffies
is zero and the timer expire for retire_blk_timer is turn to
mod_timer(&pkc->retire_blk_timer, jiffies + 0),
which will trigger cpu usage of softirq is 100%.

Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Tested-by: Xiao Jiangfeng <xiaojiangfeng@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TI CPSW(s) driver produces warning with DMA API debug options enabled:

WARNING: CPU: 0 PID: 1033 at kernel/dma/debug.c:1025 check_unmap+0x4a8/0x968
DMA-API: cpsw 48484000.ethernet: device driver frees DMA memory with different size
 [device address=0x00000000abc6aa02] [map size=64 bytes] [unmap size=42 bytes]
CPU: 0 PID: 1033 Comm: ping Not tainted 5.3.0-dirty #41
Hardware name: Generic DRA72X (Flattened Device Tree)
[<c0112c60>] (unwind_backtrace) from [<c010d270>] (show_stack+0x10/0x14)
[<c010d270>] (show_stack) from [<c09bc564>] (dump_stack+0xd8/0x110)
[<c09bc564>] (dump_stack) from [<c013b93c>] (__warn+0xe0/0x10c)
[<c013b93c>] (__warn) from [<c013b9ac>] (warn_slowpath_fmt+0x44/0x6c)
[<c013b9ac>] (warn_slowpath_fmt) from [<c01e0368>] (check_unmap+0x4a8/0x968)
[<c01e0368>] (check_unmap) from [<c01e08a8>] (debug_dma_unmap_page+0x80/0x90)
[<c01e08a8>] (debug_dma_unmap_page) from [<c0752414>] (__cpdma_chan_free+0x114/0x16c)
[<c0752414>] (__cpdma_chan_free) from [<c07525c4>] (__cpdma_chan_process+0x158/0x17c)
[<c07525c4>] (__cpdma_chan_process) from [<c0753690>] (cpdma_chan_process+0x3c/0x5c)
[<c0753690>] (cpdma_chan_process) from [<c0758660>] (cpsw_tx_mq_poll+0x48/0x94)
[<c0758660>] (cpsw_tx_mq_poll) from [<c0803018>] (net_rx_action+0x108/0x4e4)
[<c0803018>] (net_rx_action) from [<c010230c>] (__do_softirq+0xec/0x598)
[<c010230c>] (__do_softirq) from [<c0143914>] (do_softirq.part.4+0x68/0x74)
[<c0143914>] (do_softirq.part.4) from [<c0143a44>] (__local_bh_enable_ip+0x124/0x17c)
[<c0143a44>] (__local_bh_enable_ip) from [<c0871590>] (ip_finish_output2+0x294/0xb7c)
[<c0871590>] (ip_finish_output2) from [<c0875440>] (ip_output+0x210/0x364)
[<c0875440>] (ip_output) from [<c0875e2c>] (ip_send_skb+0x1c/0xf8)
[<c0875e2c>] (ip_send_skb) from [<c08a7fd4>] (raw_sendmsg+0x9a8/0xc74)
[<c08a7fd4>] (raw_sendmsg) from [<c07d6b90>] (sock_sendmsg+0x14/0x24)
[<c07d6b90>] (sock_sendmsg) from [<c07d8260>] (__sys_sendto+0xbc/0x100)
[<c07d8260>] (__sys_sendto) from [<c01011ac>] (__sys_trace_return+0x0/0x14)
Exception stack(0xea9a7fa8 to 0xea9a7ff0)
...

The reason is that cpdma_chan_submit_si() now stores original buffer length
(sw_len) in CPDMA descriptor instead of adjusted buffer length (hw_len)
used to map the buffer.

Hence, fix an issue by passing correct buffer length in CPDMA descriptor.

Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Fixes: 6670acac ("net: ethernet: ti: davinci_cpdma: add dma mapped submit")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Wait for rcu grace period after releasing netns in ctnetlink,
   from Florian Westphal.

2) Incorrect command type in flowtable offload ndo invocation,
   from wenxu.

3) Incorrect callback type in flowtable offload flow tuple
   updates, also from wenxu.

4) Fix compile warning on flowtable offload infrastructure due to
   possible reference to uninitialized variable, from Nathan Chancellor.

5) Do not inline nf_ct_resolve_clash(), this is called from slow
   path / stress situations. From Florian Westphal.

6) Missing IPv6 flow selector description in flowtable offload.

7) Missing check for NETDEV_UNREGISTER in nf_tables offload
   infrastructure, from wenxu.

8) Update NAT selftest to use randomized netns names, from
   Florian Westphal.

9) Restore nfqueue bridge support, from Marco Oliverio.

10) Compilation warning in SCTP_CHUNKMAP_*() on xt_sctp header.
    From Phil Sutter.

11) Fix bogus lookup/get match for non-anonymous rbtree sets.

12) Missing netlink validation for NFT_SET_ELEM_INTERVAL_END
    elements.

13) Missing netlink validation for NFT_DATA_VALUE after
    nft_data_init().

14) If rule specifies no actions, offload infrastructure returns
    EOPNOTSUPP.

15) Module refcount leak in object updates.

16) Missing sanitization for ARP traffic from br_netfilter, from
    Eric Dumazet.

17) Compilation breakage on big-endian due to incorrect memcpy()
    size in the flowtable offload infrastructure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In function 'memcpy',
     inlined from 'flow_offload_mangle' at net/netfilter/nf_flow_table_offload.c:112:2,
     inlined from 'flow_offload_port_dnat' at net/netfilter/nf_flow_table_offload.c:373:2,
     inlined from 'nf_flow_rule_route_ipv4' at net/netfilter/nf_flow_table_offload.c:424:3:
./include/linux/string.h:376:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
   376 |    __read_overflow2();
       |    ^~~~~~~~~~~~~~~~~~

The original u8* was done in the hope to make this more adaptable but
consensus is to keep this like it is in tc pedit.

Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This is needed, because if the flag X25_ACCPT_APPRV_FLAG is not set on a
socket (manual call confirmation) and the channel is cleared by remote
before the manual call confirmation was sent, this situation needs to
be handled.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

When creating the second host in h2_create(), two addresses are assigned
to the interface, but only one is deleted. When running the test twice
in a row the following error is observed:

$ ./router_bridge_vlan.sh
TEST: ping                                                          [ OK ]
TEST: ping6                                                         [ OK ]
TEST: vlan                                                          [ OK ]
$ ./router_bridge_vlan.sh
RTNETLINK answers: File exists
TEST: ping                                                          [ OK ]
TEST: ping6                                                         [ OK ]
TEST: vlan                                                          [ OK ]

Fix this by deleting the address during cleanup.

Fixes: 5b1e7f9e ("selftests: forwarding: Test routed bridge interface")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>