- 10 Feb, 2016 40 commits
-
-
Tejun Heo authored
[ Upstream commit 8d91f8b1 ] @console_may_schedule tracks whether console_sem was acquired through lock or trylock. If the former, we're inside a sleepable context and console_conditional_schedule() performs cond_resched(). This allows console drivers which use console_lock for synchronization to yield while performing time-consuming operations such as scrolling. However, the actual console outputting is performed while holding irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule before starting outputting lines. Also, only a few drivers call console_conditional_schedule() to begin with. This means that when a lot of lines need to be output by console_unlock(), for example on a console registration, the task doing console_unlock() may not yield for a long time on a non-preemptible kernel. If this happens with a slow console devices, for example a serial console, the outputting task may occupy the cpu for a very long time. Long enough to trigger softlockup and/or RCU stall warnings, which in turn pile more messages, sometimes enough to trigger the next cycle of warnings incapacitating the system. Fix it by making console_unlock() insert cond_resched() between lines if @console_may_schedule. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Calvin Owens <calvinowens@fb.com> Acked-by:
Jan Kara <jack@suse.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Kyle McMartin <kyle@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Vitaly Kuznetsov authored
[ Upstream commit 7625b3a0 ] Commit 08d78658 ("panic: release stale console lock to always get the logbuf printed out") introduced an unwanted bad unlock balance report when panic() is called directly and not from OOPS (e.g. from out_of_memory()). The difference is that in case of OOPS we disable locks debug in oops_enter() and on direct panic call nobody does that. Fixes: 08d78658 ("panic: release stale console lock to always get the logbuf printed out") Reported-by:
kernel test robot <ying.huang@linux.intel.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Baoquan He <bhe@redhat.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Jan Kara <jack@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 08d78658 ] In some cases we may end up killing the CPU holding the console lock while still having valuable data in logbuf. E.g. I'm observing the following: - A crash is happening on one CPU and console_unlock() is being called on some other. - console_unlock() tries to print out the buffer before releasing the lock and on slow console it takes time. - in the meanwhile crashing CPU does lots of printk()-s with valuable data (which go to the logbuf) and sends IPIs to all other CPUs. - console_unlock() finishes printing previous chunk and enables interrupts before trying to print out the rest, the CPU catches the IPI and never releases console lock. This is not the only possible case: in VT/fb subsystems we have many other console_lock()/console_unlock() users. Non-masked interrupts (or receiving NMI in case of extreme slowness) will have the same result. Getting the whole console buffer printed out on crash should be top priority. [akpm@linux-foundation.org: tweak comment text] Signed-off-by:
-
Martijn Coenen authored
[ Upstream commit 6611d8d7 ] A spare array holding mem cgroup threshold events is kept around to make sure we can always safely deregister an event and have an array to store the new set of events in. In the scenario where we're going from 1 to 0 registered events, the pointer to the primary array containing 1 event is copied to the spare slot, and then the spare slot is freed because no events are left. However, it is freed before calling synchronize_rcu(), which means readers may still be accessing threshold->primary after it is freed. Fixed by only freeing after synchronize_rcu(). Signed-off-by:
Martijn Coenen <maco@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Naoya Horiguchi authored
[ Upstream commit d96b339f ] I saw the following BUG_ON triggered in a testcase where a process calls madvise(MADV_SOFT_OFFLINE) on thps, along with a background process that calls migratepages command repeatedly (doing ping-pong among different NUMA nodes) for the first process: Soft offlining page 0x60000 at 0x700000600000 __get_any_page: 0x60000 free buddy page page:ffffea0001800000 count:0 mapcount:-127 mapping: (null) index:0x1 flags: 0x1fffc0000000000() page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0) ------------[ cut here ]------------ kernel BUG at /src/linux-dev/include/linux/mm.h:342! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: cfg80211 rfkill crc32c_intel serio_raw virtio_balloon i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi CPU: 3 PID: 3035 Comm: test_alloc_gene Tainted: G O 4.4.0-rc8-v4.4-rc8-160107-1501-00000-rc8+ #74 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88007c63d5c0 ti: ffff88007c210000 task.ti: ffff88007c210000 RIP: 0010:[<ffffffff8118998c>] [<ffffffff8118998c>] put_page+0x5c/0x60 RSP: 0018:ffff88007c213e00 EFLAGS: 00010246 Call Trace: put_hwpoison_page+0x4e/0x80 soft_offline_page+0x501/0x520 SyS_madvise+0x6bc/0x6f0 entry_SYSCALL_64_fastpath+0x12/0x6a Code: 8b fc ff ff 5b 5d c3 48 89 df e8 b0 fa ff ff 48 89 df 31 f6 e8 c6 7d ff ff 5b 5d c3 48 c7 c6 08 54 a2 81 48 89 df e8 a4 c5 01 00 <0f> 0b 66 90 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b 47 RIP [<ffffffff8118998c>] put_page+0x5c/0x60 RSP <ffff88007c213e00> The root cause resides in get_any_page() which retries to get a refcount of the page to be soft-offlined. This function calls put_hwpoison_page(), expecting that the target page is putback to LRU list. But it can be also freed to buddy. So the second check need to care about such case. Fixes: af8fae7c ("mm/memory-failure.c: clean up soft_offline_page()") Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by:
-
Kyeongdon Kim authored
[ Upstream commit d913897a ] When we're using LZ4 multi compression streams for zram swap, we found out page allocation failure message in system running test. That was not only once, but a few(2 - 5 times per test). Also, some failure cases were continually occurring to try allocation order 3. In order to make parallel compression private data, we should call kzalloc() with order 2/3 in runtime(lzo/lz4). But if there is no order 2/3 size memory to allocate in that time, page allocation fails. This patch makes to use vmalloc() as fallback of kmalloc(), this prevents page alloc failure warning. After using this, we never found warning message in running test, also It could reduce process startup latency about 60-120ms in each case. For reference a call trace : Binder_1: page allocation failure: order:3, mode:0x10c0d0 CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20 Call trace: dump_backtrace+0x0/0x270 show_stack+0x10/0x1c dump_stack+0x1c/0x28 warn_alloc_failed+0xfc/0x11c __alloc_pages_nodemask+0x724/0x7f0 __get_free_pages+0x14/0x5c kmalloc_order_trace+0x38/0xd8 zcomp_lz4_create+0x2c/0x38 zcomp_strm_alloc+0x34/0x78 zcomp_strm_multi_find+0x124/0x1ec zcomp_strm_find+0xc/0x18 zram_bvec_rw+0x2fc/0x780 zram_make_request+0x25c/0x2d4 generic_make_request+0x80/0xbc submit_bio+0xa4/0x15c __swap_writepage+0x218/0x230 swap_writepage+0x3c/0x4c shrink_page_list+0x51c/0x8d0 shrink_inactive_list+0x3f8/0x60c shrink_lruvec+0x33c/0x4cc shrink_zone+0x3c/0x100 try_to_free_pages+0x2b8/0x54c __alloc_pages_nodemask+0x514/0x7f0 __get_free_pages+0x14/0x5c proc_info_read+0x50/0xe4 vfs_read+0xa0/0x12c SyS_read+0x44/0x74 DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB [minchan@kernel.org: change vmalloc gfp and adding comment about gfp] [sergey.senozhatsky@gmail.com: tweak comments and styles] Signed-off-by:
Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sergey Senozhatsky authored
[ Upstream commit 3d5fe03a ] We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by:
-
xuejiufei authored
[ Upstream commit bef5502d ] We have found that migration source will trigger a BUG that the refcount of mle is already zero before put when the target is down during migration. The situation is as follows: dlm_migrate_lockres dlm_add_migration_mle dlm_mark_lockres_migrating dlm_get_mle_inuse <<<<<< Now the refcount of the mle is 2. dlm_send_one_lockres and wait for the target to become the new master. <<<<<< o2hb detect the target down and clean the migration mle. Now the refcount is 1. dlm_migrate_lockres woken, and put the mle twice when found the target goes down which trigger the BUG with the following message: "ERROR: bad mle: ". Signed-off-by:
Jiufei Xue <xuejiufei@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sergey Senozhatsky authored
[ Upstream commit 72214a24 ] In Python3+ print is a function so the old syntax is not correct anymore: $ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old File "./scripts/bloat-o-meter", line 61 print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \ ^ SyntaxError: invalid syntax Fix by calling print as a function. Tested on python 2.7.11, 3.5.1 Signed-off-by:
-
Laura Abbott authored
[ Upstream commit ea535e41 ] In include/asm-generic/sections.h: /* * Usage guidelines: * _text, _data: architecture specific, don't use them in * arch-independent code * [_stext, _etext]: contains .text.* sections, may also contain * .rodata.* * and/or .init.* sections _text is not guaranteed across architectures. Architectures such as ARM may reuse parts which are not actually text and erroneously trigger a bug. Switch to using _stext which is guaranteed to contain text sections. Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com> Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sudip Mukherjee authored
[ Upstream commit 601f1db6 ] The build of m32104ut_defconfig for m32r arch was failing for long long time with the error: ERROR: "memory_start" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [drivers/scsi/sg.ko] undefined! ERROR: "memory_start" [drivers/scsi/sg.ko] undefined! ERROR: "memory_end" [drivers/i2c/i2c-dev.ko] undefined! ERROR: "memory_start" [drivers/i2c/i2c-dev.ko] undefined! As done in other architectures export the symbols to fix the error. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 01b9b0b2 ] In some cases tmp_bug can be not filled in cifs_filldir and stay uninitialized, therefore its printk with "%s" modifier can leak content of kernelspace memory. If old content of this buffer does not contain '\0' access bejond end of allocated object can crash the host. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Steve French <sfrench@localhost.localdomain> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Rabin Vincent authored
[ Upstream commit 820962dc ] cifs_call_async() queues the MID to the pending list and calls smb_send_rqst(). If smb_send_rqst() performs a partial send, it sets the tcpStatus to CifsNeedReconnect and returns an error code to cifs_call_async(). In this case, cifs_call_async() removes the MID from the list and returns to the caller. However, cifs_call_async() releases the server mutex _before_ removing the MID. This means that a cifs_reconnect() can race with this function and manage to remove the MID from the list and delete the entry before cifs_call_async() calls cifs_delete_mid(). This leads to various crashes due to the use after free in cifs_delete_mid(). Task1 Task2 cifs_call_async(): - rc = -EAGAIN - mutex_unlock(srv_mutex) cifs_reconnect(): - mutex_lock(srv_mutex) - mutex_unlock(srv_mutex) - list_delete(mid) - mid->callback() cifs_writev_callback(): - mutex_lock(srv_mutex) - delete(mid) - mutex_unlock(srv_mutex) - cifs_delete_mid(mid) <---- use after free Fix this by removing the MID in cifs_call_async() before releasing the srv_mutex. Also hold the srv_mutex in cifs_reconnect() until the MIDs are moved out of the pending list. Signed-off-by:
Rabin Vincent <rabin.vincent@axis.com> Acked-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Jamie Bainbridge authored
[ Upstream commit ec7147a9 ] Under some conditions, CIFS can repeatedly call the cifs_dbg() logging wrapper. If done rapidly enough, the console framebuffer can softlockup or "rcu_sched self-detected stall". Apply the built-in log ratelimiters to prevent such hangs. Signed-off-by:
Jamie Bainbridge <jamie.bainbridge@gmail.com> Signed-off-by:
Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 0b456f04 ] The useful macros embed message level in the name. Thus, it cleans up the code a bit. In cases when it was plain printk() the conversion was done to info level. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 55d83e0d ] This patch converts custom dumper to use native print_hex_dump() instead. The cifs_dump_mem() will have an offsets per each line which differs it from the original code. In the dump_smb() we may use native print_hex_dump() as well. It will show slightly different output in ASCII part when character is unprintable, otherwise it keeps same structure. Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit 525fd5a9 ] The value returned by sys_personality has type "long int". It is saved to a variable of type "int", which is not a problem yet because the type of task_struct->pesonality is "unsigned int". The problem is the sign extension from "int" to "long int" that happens on return from sys_sparc64_personality. For example, a userspace call personality((unsigned) -EINVAL) will result to any subsequent personality call, including absolutely harmless read-only personality(0xffffffff) call, failing with errno set to EINVAL. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Cc: <stable@vger.kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Carlo Caione authored
[ Upstream commit e10c3219 ] While in sdhci_execute_tuning() the choice whether or not to enable the tuning is done on the actual timing, in the mmc_sdio_init_uhs_card() the check is done on the capability of the card. This difference is causing some issues with some SDIO cards in DDR50 mode where the CDM19 is wrongly issued. With this patch we modify the check in both mmc_(sd|sdio)_init_uhs_card() functions to take the proper decision only according to the actual timing specification. Cc: stable@vger.kernel.org Signed-off-by:
Carlo Caione <carlo@endlessm.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Weijun Yang authored
[ Upstream commit 4324f6de ] As SD Specifications Part1 Physical Layer Specification Version 3.01 says, CMD19 tuning is available for unlocked cards in transfer state of 1.8V signaling mode. The small difference between v3.00 and 3.01 spec means that CMD19 tuning is also available for DDR50 mode. Signed-off-by:
Weijun Yang <york.yang@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
-
Adrian Hunter authored
[ Upstream commit 63e415c6 ] For each MMC, SD and SDIO there is code that holds the clock, calls ops->execute_tuning, and releases the clock. Simplify the code a bit by providing a separate function to do that. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Andrew Gabbasov authored
[ Upstream commit 4b75bffc ] In mmc_init_card function some of the branches in error handling paths go to "err" label, which skips removing of newly allocated card structure, that will actually not be used. Fix that by using proper "free_card" label. Also, some messages in these branches are reported as warnings, although the operation processing is not continued. Change these messages to error level. Signed-off-by:
Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 0bcb7efd ] commit 4956e109 ("ARM: 6244/1: mmci: add variant data and default MCICLOCK support") added variant data for ARM, U300 and Ux500 variants. The Nomadik NHK8815/8820 variant was erroneously labeled as a U300 variant, and when the proper Nomadik variant was later introduced in commit 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik MMCI variant") this was not fixes. Let's say this fixes the latter commit as there was no proper Nomadik support until then. Cc: stable@vger.kernel.org Fixes: 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik...") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Mans Rullgard authored
[ Upstream commit 2895b2ca ] Cyclic transfer callbacks rely on block completion interrupts which were disabled in commit ff7b05f2 ("dmaengine/dw_dmac: Don't handle block interrupts"). This re-enables block interrupts so the cyclic callbacks can work. Other transfer types are not affected as they set the INT_EN bit only on the last block. Fixes: ff7b05f2 ("dmaengine/dw_dmac: Don't handle block interrupts") Signed-off-by:
Mans Rullgard <mans@mansr.com> Reviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mans Rullgard authored
[ Upstream commit df3bb8a0 ] Commit 61e183f8 ("dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resume") moved some channel initialisation to a new function which must be called before starting a transfer. This updates dw_dma_cyclic_start() to use dwc_dostart() like the other modes, thus ensuring dwc_initialize() gets called and removing some code duplication. Fixes: 61e183f8 ("dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resume") Signed-off-by:
-
Jarkko Nikula authored
[ Upstream commit 550da64b ] The same error message is printed from different functions. Add a function name to error message in order to make it easier to grep error from sources. Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by:
-
Greg Kurz authored
[ Upstream commit b4d7f161 ] The get and set operations got exchanged by mistake when moving the code from book3s.c to powerpc.c. Fixes: 3840edc8 Cc: stable@vger.kernel.org # 3.18+ Signed-off-by:
Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Helge Deller authored
[ Upstream commit e60fc5aa ] On a 64bit kernel build the compiler aligns the _sifields union in the struct siginfo_t on a 64bit address. The __ARCH_SI_PREAMBLE_SIZE define compensates for this alignment and thus fixes the wait testcase of the strace package. The symptoms of a wrong __ARCH_SI_PREAMBLE_SIZE value is that _sigchld.si_stime variable is missed to be copied and thus after a copy_siginfo() will have uninitialized values. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Minchan Kim authored
[ Upstream commit 21ea9fb6 ] In balloon_page_dequeue, pages_lock should cover the loop (ie, list_for_each_entry_safe). Otherwise, the cursor page could be isolated by compaction and then list_del by isolation could poison the page->lru.{prev,next} so the loop finally could access wrong address like this. This patch fixes the bug. general protection fault: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 2 PID: 82 Comm: vballoon Not tainted 4.4.0-rc5-mm1-access_bit+ #1906 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800a7ff0000 ti: ffff8800a7fec000 task.ti: ffff8800a7fec000 RIP: 0010:[<ffffffff8115e754>] [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130 RSP: 0018:ffff8800a7fefdc0 EFLAGS: 00010246 RAX: ffff88013fff9a70 RBX: ffffea000056fe00 RCX: 0000000000002b7d RDX: ffff88013fff9a70 RSI: ffffea000056fe00 RDI: ffff88013fff9a68 RBP: ffff8800a7fefde8 R08: ffffea000056fda0 R09: 0000000000000000 R10: ffff8800a7fefd90 R11: 0000000000000001 R12: dead0000000000e0 R13: ffffea000056fe20 R14: ffff880138809070 R15: ffff880138809060 FS: 0000000000000000(0000) GS:ffff88013fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f229c10e000 CR3: 00000000b8b53000 CR4: 00000000000006a0 Stack: 0000000000000100 ffff880138809088 ffff880138809000 ffff880138809060 0000000000000046 ffff8800a7fefe28 ffffffff812c86d3 ffff880138809020 ffff880138809000 fffffffffff91900 0000000000000100 ffff880138809060 Call Trace: [<ffffffff812c86d3>] leak_balloon+0x93/0x1a0 [<ffffffff812c8bc7>] balloon+0x217/0x2a0 [<ffffffff8143739e>] ? __schedule+0x31e/0x8b0 [<ffffffff81078160>] ? abort_exclusive_wait+0xb0/0xb0 [<ffffffff812c89b0>] ? update_balloon_stats+0xf0/0xf0 [<ffffffff8105b6e9>] kthread+0xc9/0xe0 [<ffffffff8105b620>] ? kthread_park+0x60/0x60 [<ffffffff8143b4af>] ret_from_fork+0x3f/0x70 [<ffffffff8105b620>] ? kthread_park+0x60/0x60 Code: 8d 60 e0 0f 84 af 00 00 00 48 8b 43 20 a8 01 75 3b 48 89 d8 f0 0f ba 28 00 72 10 48 8b 03 f6 c4 08 75 2f 48 89 df e8 8c 83 f9 ff <49> 8b 44 24 20 4d 8d 6c 24 20 48 83 e8 20 4d 39 f5 74 7a 4c 89 RIP [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130 RSP <ffff8800a7fefdc0> ---[ end trace 43cf28060d708d5f ]--- Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Cc: <stable@vger.kernel.org> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Rafael Aquini <aquini@redhat.com> Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 6544a1df ] When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d1 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Cc: stable@vger.kernel.org Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dave Chinner authored
[ Upstream commit 7d6a13f0 ] When we do dquot readahead in log recovery, we do not use a verifier as the underlying buffer may not have dquots in it. e.g. the allocation operation hasn't yet been replayed. Hence we do not want to fail recovery because we detect an operation to be replayed has not been run yet. This problem was addressed for inodes in commit d8914002 ("xfs: inode buffers may not be valid during recovery readahead") but the problem was not recognised to exist for dquots and their buffers as the dquot readahead did not have a verifier. The result of not using a verifier is that when the buffer is then next read to replay a dquot modification, the dquot buffer verifier will only be attached to the buffer if *readahead is not complete*. Hence we can read the buffer, replay the dquot changes and then add it to the delwri submission list without it having a verifier attached to it. This then generates warnings in xfs_buf_ioapply(), which catches and warns about this case. Fix this and make it handle the same readahead verifier error cases as for inode buffers by adding a new readahead verifier that has a write operation as well as a read operation that marks the buffer as not done if any corruption is detected. Also make sure we don't run readahead if the dquot buffer has been marked as cancelled by recovery. This will result in readahead either succeeding and the buffer having a valid write verifier, or readahead failing and the buffer state requiring the subsequent read to resubmit the IO with the new verifier. In either case, this will result in the buffer always ending up with a valid write verifier on it. Note: we also need to fix the inode buffer readahead error handling to mark the buffer with EIO. Brian noticed the code I copied from there wrong during review, so fix it at the same time. Add comments linking the two functions that handle readahead verifier errors together so we don't forget this behavioural link in future. cc: <stable@vger.kernel.org> # 3.12 - current Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Dave Chinner authored
[ Upstream commit b79f4a1c ] When we do inode readahead in log recovery, we do can do the readahead before we've replayed the icreate transaction that stamps the buffer with inode cores. The inode readahead verifier catches this and marks the buffer as !done to indicate that it doesn't yet contain valid inodes. In adding buffer error notification (i.e. setting b_error = -EIO at the same time as as we clear the done flag) to such a readahead verifier failure, we can then get subsequent inode recovery failing with this error: XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32 This occurs when readahead completion races with icreate item replay such as: inode readahead find buffer lock buffer submit RA io .... icreate recovery xfs_trans_get_buffer find buffer lock buffer <blocks on RA completion> ..... <ra completion> fails verifier clear XBF_DONE set bp->b_error = -EIO release and unlock buffer <icreate gains lock> icreate initialises buffer marks buffer as done adds buffer to delayed write queue releases buffer At this point, we have an initialised inode buffer that is up to date but has an -EIO state registered against it. When we finally get to recovering an inode in that buffer: inode item recovery xfs_trans_read_buffer find buffer lock buffer sees XBF_DONE is set, returns buffer sees bp->b_error is set fail log recovery! Essentially, we need xfs_trans_get_buf_map() to clear the error status of the buffer when doing a lookup. This function returns uninitialised buffers, so the buffer returned can not be in an error state and none of the code that uses this function expects b_error to be set on return. Indeed, there is an ASSERT(!bp->b_error); in the transaction case in xfs_trans_get_buf_map() that would have caught this if log recovery used transactions.... This patch firstly changes the inode readahead failure to set -EIO on the buffer, and secondly changes xfs_buf_get_map() to never return a buffer with an error state set so this first change doesn't cause unexpected log recovery failures. cc: <stable@vger.kernel.org> # 3.12 - current Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit bcb7825a ] The normalization pass in the sorting routine of the relative exception table serves two purposes: - it ensures that the address fields of the exception table entries are fully ordered, so that no ambiguities arise between entries with identical instruction offsets (i.e., when two instructions that are exactly 8 bytes apart each have an exception table entry associated with them) - it ensures that the offsets of both the instruction and the fixup fields of each entry are relative to their final location after sorting. Commit eb608fb3 ("s390/exceptions: switch to relative exception table entries") ported the relative exception table format from x86, but modified the sorting routine to only normalize the instruction offset field and not the fixup offset field. The result is that the fixup offset of each entry will be relative to the original location of the entry before sorting, likely leading to crashes when those entries are dereferenced. Fixes: eb608fb3 ("s390/exceptions: switch to relative exception table entries") Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit 0a882cad ] fdo#93634 Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit 0754fb29 ] I was seeing some really weird behaviour where piping UML's output somewhere would cause output to get duplicated: $ ./vmlinux | head -n 40 Checking that ptrace can change system call numbers...Core dump limits : soft - 0 hard - NONE OK Checking syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Checking advanced syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Core dump limits : soft - 0 hard - NONE This is because these tests do a fork() which duplicates the non-empty stdout buffer, then glibc flushes the duplicated buffer as each child exits. A simple workaround is to flush before forking. Cc: stable@vger.kernel.org Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit 9f2dfda2 ] An inverted return value check in hostfs_mknod() caused the function to return success after handling it as an error (and cleaning up). It resulted in the following segfault when trying to bind() a named unix socket: Pid: 198, comm: a.out Not tainted 4.4.0-rc4 RIP: 0033:[<0000000061077df6>] RSP: 00000000daae5d60 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006092a460 RCX: 00000000dfc54208 RDX: 0000000061073ef1 RSI: 0000000000000070 RDI: 00000000e027d600 RBP: 00000000daae5de0 R08: 00000000da980ac0 R09: 0000000000000000 R10: 0000000000000003 R11: 00007fb1ae08f72a R12: 0000000000000000 R13: 000000006092a460 R14: 00000000daaa97c0 R15: 00000000daaa9a88 Kernel panic - not syncing: Kernel mode fault at addr 0x40, ip 0x61077df6 CPU: 0 PID: 198 Comm: a.out Not tainted 4.4.0-rc4 #1 Stack: e027d620 dfc54208 0000006f da981398 61bee000 0000c1ed daae5de0 0000006e e027d620 dfcd4208 00000005 6092a460 Call Trace: [<60dedc67>] SyS_bind+0xf7/0x110 [<600587be>] handle_syscall+0x7e/0x80 [<60066ad7>] userspace+0x3e7/0x4e0 [<6006321f>] ? save_registers+0x1f/0x40 [<6006c88e>] ? arch_prctl+0x1be/0x1f0 [<60054985>] fork_handler+0x85/0x90 Let's also get rid of the "cosmic ray protection" while we're at it. Fixes: e9193059 "hostfs: fix races in dentry_name() and inode_name()" Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit 385277bf ] When there is an error copying a chunk dm-snapshot can incorrectly hold associated bios indefinitely, resulting in hung IO. The function copy_callback sets pe->error if there was error copying the chunk, and then calls complete_exception. complete_exception calls pending_complete on error, otherwise it calls commit_exception with commit_callback (and commit_callback calls complete_exception). The persistent exception store (dm-snap-persistent.c) assumes that calls to prepare_exception and commit_exception are paired. persistent_prepare_exception increases ps->pending_count and persistent_commit_exception decreases it. If there is a copy error, persistent_prepare_exception is called but persistent_commit_exception is not. This results in the variable ps->pending_count never returning to zero and that causes some pending exceptions (and their associated bios) to be held forever. Fix this by unconditionally calling commit_exception regardless of whether the copy was successful. A new "valid" parameter is added to commit_exception -- when the copy fails this parameter is set to zero so that the chunk that failed to copy (and all following chunks) is not recorded in the snapshot store. Also, remove commit_callback now that it is merely a wrapper around pending_complete. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Jeff Layton authored
[ Upstream commit 7f3697e2 ] Dmitry reported that he was able to reproduce the WARN_ON_ONCE that fires in locks_free_lock_context when the flc_posix list isn't empty. The problem turns out to be that we're basically rebuilding the file_lock from scratch in fcntl_setlk when we discover that the setlk has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END, then we may end up with fl_start and fl_end values that differ from when the lock was initially set, if the file position or length of the file has changed in the interim. Fix this by just reusing the same lock request structure, and simply override fl_type value with F_UNLCK as appropriate. That ensures that we really are unlocking the lock that was initially set. While we're there, make sure that we do pop a WARN_ON_ONCE if the removal ever fails. Also return -EBADF in this event, since that's what we would have returned if the close had happened earlier. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Fixes: c293621b (stale POSIX lock handling) Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
-
Jeff Layton authored
[ Upstream commit 8116bf4c ] Signed-off-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 006bda75 ] Update and fix some 7265 PCI IDs entries. CC: <stable@vger.kernel.org> [3.13+] Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Grygorii Strashko authored
[ Upstream commit 8ff0ef99 ] On -RT and if kernel is booting with "threadirqs" cmd line parameter, PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler()) will be forced threaded and, as result, will generate warnings like this: WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174() irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts Backtrace: (warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40) (warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174) (handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8) (handle_irq_event) from (handle_simple_irq+0x90/0x118) (handle_simple_irq) from (generic_handle_irq+0x30/0x44) (generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c) (dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c) (irq_forced_thread_fn) from (irq_thread+0x128/0x204) This happens because all of them invoke generic_handle_irq() from the requested handler. generic_handle_irq() grabs raw_locks and thus needs to run in raw-IRQ context. This issue was originally reproduced on TI dra7-evem, but, as was identified during discussion [1], other hosts can also suffer from this issue. Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers IRQF_NO_THREAD explicitly. [1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com [bhelgaas: add stable tag, fix typos] Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> (for imx6) CC: stable@vger.kernel.org CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Kukjin Kim <kgene@kernel.org> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Richard Zhu <Richard.Zhu@freescale.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com> CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
