- 03 Jun, 2023 1 commit
-
-
Jakub Kicinski authored
Make sure all relevant headers are included, we allocate memory, use memcpy() and Linux types without including the headers. Signed-off-by:Jakub Kicinski <kuba@kernel.org>
-
- 02 Jun, 2023 11 commits
-
-
Guillaume Nault authored
Callers of flowi4_update_output() never try to update ->flowi4_tos: * ip_route_connect() updates ->flowi4_tos with its own current value. * ip_route_newports() has two users: tcp_v4_connect() and dccp_v4_connect. Both initialise fl4 with ip_route_connect(), which in turn sets ->flowi4_tos with RT_TOS(inet_sk(sk)->tos) and ->flowi4_scope based on SOCK_LOCALROUTE. Then ip_route_newports() updates ->flowi4_tos with RT_CONN_FLAGS(sk), which is the same as RT_TOS(inet_sk(sk)->tos), unless SOCK_LOCALROUTE is set on the socket. In that case, the lowest order bit is set to 1, to eventually inform ip_route_output_key_hash() to restrict the scope to RT_SCOPE_LINK. This is equivalent to properly setting ->flowi4_scope as ip_route_connect() did. * ip_vs_xmit.c initialises ->flowi4_tos with memset(0), then calls flowi4_update_output() with tos=0. * sctp_v4_get_dst() uses the same RT_CONN_FLAGS_TOS() when initialising ->flowi4_tos and when calling flowi4_update_output(). In the end, ->flowi4_tos never changes. So let's just drop the tos parameter. This will simplify the conversion of ->flowi4_tos from __u8 to dscp_t. Signed-off-by:Guillaume Nault <gnault@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Moritz Fischer authored
The gotos for cleanup aren't required, the function might as well just return the actual error code. Signed-off-by:
Moritz Fischer <moritzf@google.com> Reviewed-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by:
-
Jiapeng Chong authored
No functional modification involved. net/ipv4/ip_gre.c:192 ipgre_err() warn: inconsistent indenting. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5375Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Jakub Kicinski authored
Make sure we don't generate premature POLLIN events. Signed-off-by:
-
Jakub Kicinski authored
TLS does not override .poll() so TLS-enabled socket will generate an event whenever data arrives at the TCP socket. This leads to unnecessary wakeups on slow connections. Signed-off-by:
-
Zhengchao Shao authored
The test case shown in [1] triggers the kernel to access the null pointer. Therefore, add related test cases to mq. The test results are as follows: ./tdc.py -e 0531 1..1 ok 1 0531 - Replace mq with invalid parent ID ./tdc.py -c mq 1..8 ok 1 ce7d - Add mq Qdisc to multi-queue device (4 queues) ok 2 2f82 - Add mq Qdisc to multi-queue device (256 queues) ok 3 c525 - Add duplicate mq Qdisc ok 4 128a - Delete nonexistent mq Qdisc ok 5 03a9 - Delete mq Qdisc twice ok 6 be0f - Add mq Qdisc to single-queue device ok 7 1023 - Show mq class ok 8 0531 - Replace mq with invalid parent ID [1] https://lore.kernel.org/all/20230527093747.3583502-1-shaozhengchao@huawei.com/Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by:
Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20230601012250.52738-1-shaozhengchao@huawei.comSigned-off-by:
-
Florian Fainelli authored
Add the ability to read the PHY maintained LPI counter which is in the Clause 45 vendor space, device address 7, offset 0x803F. The counter is cleared on read. Signed-off-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230531231729.1873932-1-florian.fainelli@broadcom.comSigned-off-by:
-
Heiner Kallweit authored
In addition to properly handling probe deferrals dev_err_probe() conveniently combines printing an error message with returning the errno. So let's use it for every error path in rtl_init_one() to simplify the code. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/f0596a19-d517-e301-b649-304f9247b75a@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Oleksij Rempel says: ==================== Extend dt-bindings for PSE-PD controllers and update prtt1c dts This patch set comes in response to issues identified while adding PoDL PSE support to the stm32 prtt1c device tree. The existing pse-pd device tree bindings did not allow node name patterns like "ethernet-pse-0" and "ethernet-pse-1", leading to validation failures. To address these false positives in validation, the device tree bindings are extended to support these node name patterns. Alongside this, an example node is added to aid in the improved validation process. ==================== Link: https://lore.kernel.org/r/20230531102113.3353065-1-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
Extend the pattern matching for PSE-PD controller nodes to allow -N suffixes. This enables the use of multiple "ethernet-pse" nodes without the need for a "reg" property. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Jiri Pirko authored
In the offending fixes commit I mistakenly removed the reply message of the port new command. I was under impression it is a new port notification, partly due to the "notify" in the name of the helper function. Bring the code sending reply with new port message back, this time putting it directly to devlink_nl_cmd_port_new_doit() Fixes: c496daeb ("devlink: remove duplicate port notification") Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
-
- 01 Jun, 2023 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/sfc/tc.c 622ab656 ("sfc: fix error unwinds in TC offload") b6583d5e ("sfc: support TC decap rules matching on enc_src_port") net/mptcp/protocol.c 5b825727 ("mptcp: add annotations around msk->subflow accesses") e76c8ef5 ("mptcp: refactor mptcp_stream_accept()") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Happy Wear a Dress Day. Fairly standard-sized batch of fixes, accounting for the lack of sub-tree submissions this week. The mlx5 IRQ fixes are notable, people were complaining about that. No fires burning. Current release - regressions: - eth: mlx5e: - multiple fixes for dynamic IRQ allocation - prevent encap offload when neigh update is running - eth: mana: fix perf regression: remove rx_cqes, tx_cqes counters Current release - new code bugs: - eth: mlx5e: DR, add missing mutex init/destroy in pattern manager Previous releases - always broken: - tcp: deny tcp_disconnect() when threads are waiting - sched: prevent ingress Qdiscs from getting installed in random locations in the hierarchy and moving around - sched: flower: fix possible OOB write in fl_set_geneve_opt() - netlink: fix NETLINK_LIST_MEMBERSHIPS length report - udp6: fix race condition in udp6_sendmsg & connect - tcp: fix mishandling when the sack compression is deferred - rtnetlink: validate link attributes set at creation time - mptcp: fix connect timeout handling - eth: stmmac: fix call trace when stmmac_xdp_xmit() is invoked - eth: amd-xgbe: fix the false linkup in xgbe_phy_status - eth: mlx5e: - fix corner cases in internal buffer configuration - drain health before unregistering devlink - usb: qmi_wwan: set DTR quirk for BroadMobi BM818 Misc: - tcp: return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set" * tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits) mptcp: fix active subflow finalization mptcp: add annotations around sk->sk_shutdown accesses mptcp: fix data race around msk->first access mptcp: consolidate passive msk socket initialization mptcp: add annotations around msk->subflow accesses mptcp: fix connect timeout handling rtnetlink: add the missing IFLA_GRO_ tb check in validate_linkmsg rtnetlink: move IFLA_GSO_ tb check to validate_linkmsg rtnetlink: call validate_linkmsg in rtnl_create_link ice: recycle/free all of the fragments from multi-buffer frame net: phy: mxl-gpy: extend interrupt fix to all impacted variants net: renesas: rswitch: Fix return value in error path of xmit net: dsa: mv88e6xxx: Increase wait after reset deactivation net: ipa: Use correct value for IPA_STATUS_SIZE tcp: fix mishandling when the sack compression is deferred. net/sched: flower: fix possible OOB write in fl_set_geneve_opt() sfc: fix error unwinds in TC offload net/mlx5: Read embedded cpu after init bit cleared net/mlx5e: Fix error handling in mlx5e_refresh_tirs net/mlx5: Ensure af_desc.mask is properly initialized ... -
Mike Christie authored
When switching from kthreads to vhost_tasks two bugs were added: 1. The vhost worker tasks's now show up as processes so scripts doing ps or ps a would not incorrectly detect the vhost task as another process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but vhost tasks's didn't disable or add support for them. To fix both bugs, this switches the vhost task to be thread in the process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that SIGKILL/STOP support is required because CLONE_THREAD requires CLONE_SIGHAND which requires those 2 signals to be supported. This is a modified version of the patch written by Mike Christie <michael.christie@oracle.com> which was a modified version of patch originally written by Linus. Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER. Including ignoring signals, setting up the register state, and having get_signal return instead of calling do_group_exit. Tidied up the vhost_task abstraction so that the definition of vhost_task only needs to be visible inside of vhost_task.c. Making it easier to review the code and tell what needs to be done where. As part of this the main loop has been moved from vhost_worker into vhost_task_fn. vhost_worker now returns true if work was done. The main loop has been updated to call get_signal which handles SIGSTOP, freezing, and collects the message that tells the thread to exit as part of process exit. This collection clears __fatal_signal_pending. This collection is not guaranteed to clear signal_pending() so clear that explicitly so the schedule() sleeps. For now the vhost thread continues to exist and run work until the last file descriptor is closed and the release function is called as part of freeing struct file. To avoid hangs in the coredump rendezvous and when killing threads in a multi-threaded exec. The coredump code and de_thread have been modified to ignore vhost threads. Remvoing the special case for exec appears to require teaching vhost_dev_flush how to directly complete transactions in case the vhost thread is no longer running. Removing the special case for coredump rendezvous requires either the above fix needed for exec or moving the coredump rendezvous into get_signal. Fixes: 6e890c5d ("vhost: use vhost_tasks for worker threads") Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Co-developed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-05-31 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Read embedded cpu after init bit cleared net/mlx5e: Fix error handling in mlx5e_refresh_tirs net/mlx5: Ensure af_desc.mask is properly initialized net/mlx5: Fix setting of irq->map.index for static IRQ case net/mlx5: Remove rmap also in case dynamic MSIX not supported ==================== Link: https://lore.kernel.org/r/20230601031051.131529-1-saeed@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes for connect timeout, access annotations, and subflow init Patch 1 allows the SO_SNDTIMEO sockopt to correctly change the connect timeout on MPTCP sockets. Patches 2-5 add READ_ONCE()/WRITE_ONCE() annotations to fix KCSAN issues. Patch 6 correctly initializes some subflow fields on outgoing connections. ==================== Link: https://lore.kernel.org/r/20230531-send-net-20230531-v1-0-47750c420571@kernel.orgSigned-off-by:
-
Paolo Abeni authored
Active subflow are inserted into the connection list at creation time. When the MPJ handshake completes successfully, a new subflow creation netlink event is generated correctly, but the current code wrongly avoid initializing a couple of subflow data. The above will cause misbehavior on a few exceptional events: unneeded mptcp-level retransmission on msk-level sequence wrap-around and infinite mapping fallback even when a MPJ socket is present. Address the issue factoring out the needed initialization in a new helper and invoking the latter from __mptcp_finish_join() time for passive subflow and from mptcp_finish_join() for active ones. Fixes: 0530020a ("mptcp: track and update contiguous data status") Cc: stable@vger.kernel.org Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
Christoph reported the mptcp variant of a recently addressed plain TCP issue. Similar to commit e14cadfd ("tcp: add annotations around sk->sk_shutdown accesses") add READ/WRITE ONCE annotations to silence KCSAN reports around lockless sk_shutdown access. Fixes: 71ba088c ("mptcp: cleanup accept and poll") Reported-by:
Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/401Reviewed-by:
-
Paolo Abeni authored
The first subflow socket is accessed outside the msk socket lock by mptcp_subflow_fail(), we need to annotate each write access with WRITE_ONCE, but a few spots still lacks it. Fixes: 76a13b31 ("mptcp: invoke MP_FAIL response when needed") Reviewed-by:
-
Paolo Abeni authored
When the msk socket is cloned at MPC handshake time, a few fields are initialized in a racy way outside mptcp_sk_clone() and the msk socket lock. The above is due historical reasons: before commit a88d0092 ("mptcp: simplify subflow_syn_recv_sock()") as the first subflow socket carrying all the needed date was not available yet at msk creation time We can now refactor the code moving the missing initialization bit under the socket lock, removing the init race and avoiding some code duplication. This will also simplify the next patch, as all msk->first write access are now under the msk socket lock. Fixes: 0397c6d8 ("mptcp: keep unaccepted MPC subflow into join list") Reviewed-by:
-
Paolo Abeni authored
The MPTCP can access the first subflow socket in a few spots outside the socket lock scope. That is actually safe, as MPTCP will delete the socket itself only after the msk sock close(). Still the such accesses causes a few KCSAN splats, as reported by Christoph. Silence the harmless warning adding a few annotation around the relevant accesses. Fixes: 71ba088c ("mptcp: cleanup accept and poll") Reported-by:
-
Paolo Abeni authored
Ondrej reported a functional issue WRT timeout handling on connect with a nice reproducer. The problem is that the current mptcp connect waits for both the MPTCP socket level timeout, and the first subflow socket timeout. The latter is not influenced/touched by the exposed setsockopt(). Overall the above makes the SO_SNDTIMEO a no-op on connect. Since mptcp_connect is invoked via inet_stream_connect and the latter properly handle the MPTCP level timeout, we can address the issue making the nested subflow level connect always unblocking. This also allow simplifying a bit the code, dropping an ugly hack to handle the fastopen and custom proto_ops connect. The issues predates the blamed commit below, but the current resolution requires the infrastructure introduced there. Fixes: 54f1944e ("mptcp: factor out mptcp_connect()") Reported-by:
Ondrej Mosnacek <omosnace@redhat.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/399 Cc: stable@vger.kernel.org Reviewed-by:
-
Jakub Kicinski authored
Xin Long says: ==================== rtnetlink: a couple of fixes in linkmsg validation validate_linkmsg() was introduced to do linkmsg validation for existing links. However, the new created links also need this linkmsg validation. Add validate_linkmsg() check for link creating in Patch 1, and add more tb checks into validate_linkmsg() in Patch 2 and 3. ==================== Link: https://lore.kernel.org/r/cover.1685548598.git.lucien.xin@gmail.comSigned-off-by:
-
Xin Long authored
This fixes the issue that dev gro_max_size and gso_ipv4_max_size can be set to a huge value: # ip link add dummy1 type dummy # ip link set dummy1 gro_max_size 4294967295 # ip -d link show dummy1 dummy addrgenmode eui64 ... gro_max_size 4294967295 Fixes: 0fe79f28 ("net: allow gro_max_size to exceed 65536") Fixes: 9eefedd5 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Reported-by:Xiumei Mu <xmu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
-
Xin Long authored
These IFLA_GSO_* tb check should also be done for the new created link, otherwise, they can be set to a huge value when creating links: # ip link add dummy1 gso_max_size 4294967295 type dummy # ip -d link show dummy1 dummy addrgenmode eui64 ... gso_max_size 4294967295 Fixes: 46e6b992 ("rtnetlink: allow GSO maximums to be set on device creation") Fixes: 9eefedd5 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Signed-off-by: -
Xin Long authored
validate_linkmsg() was introduced by commit 1840bb13 ("[RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK") to validate tb[IFLA_ADDRESS/BROADCAST] for existing links. The same check should also be done for newly created links. This patch adds validate_linkmsg() call in rtnl_create_link(), to avoid the invalid address set when creating some devices like: # ip link add dummy0 type dummy # ip link add link dummy0 name mac0 address 01:02 type macsec Fixes: 0e06877c ("[RTNETLINK]: rtnl_link: allow specifying initial device address") Signed-off-by:
-
Maciej Fijalkowski authored
The ice driver caches next_to_clean value at the beginning of ice_clean_rx_irq() in order to remember the first buffer that has to be freed/recycled after main Rx processing loop. The end boundary is indicated by first descriptor of frame that Rx processing loop has ended its duties. Note that if mentioned loop ended in the middle of gathering multi-buffer frame, next_to_clean would be pointing to the descriptor in the middle of the frame BUT freeing/recycling stage will stop at the first descriptor. This means that next iteration of ice_clean_rx_irq() will miss the (first_desc, next_to_clean - 1) entries. When running various 9K MTU workloads, such splats were observed: [ 540.780716] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 540.787787] #PF: supervisor read access in kernel mode [ 540.793002] #PF: error_code(0x0000) - not-present page [ 540.798218] PGD 0 P4D 0 [ 540.800801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 540.805231] CPU: 18 PID: 3984 Comm: xskxceiver Tainted: G W 6.3.0-rc7+ #96 [ 540.813619] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 540.824209] RIP: 0010:ice_clean_rx_irq+0x2b6/0xf00 [ice] [ 540.829678] Code: 74 24 10 e9 aa 00 00 00 8b 55 78 41 31 57 10 41 09 c4 4d 85 ff 0f 84 83 00 00 00 49 8b 57 08 41 8b 4f 1c 65 8b 35 1a fa 4b 3f <48> 8b 02 48 c1 e8 3a 39 c6 0f 85 a2 00 00 00 f6 42 08 02 0f 85 98 [ 540.848717] RSP: 0018:ffffc9000f42fc50 EFLAGS: 00010282 [ 540.854029] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 000000000000fffe [ 540.861272] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff [ 540.868519] RBP: ffff88984a05ac00 R08: 0000000000000000 R09: dead000000000100 [ 540.875760] R10: ffff88983fffcd00 R11: 000000000010f2b8 R12: 0000000000000004 [ 540.883008] R13: 0000000000000003 R14: 0000000000000800 R15: ffff889847a10040 [ 540.890253] FS: 00007f6ddf7fe640(0000) GS:ffff88afdf800000(0000) knlGS:0000000000000000 [ 540.898465] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.904299] CR2: 0000000000000000 CR3: 000000010d3da001 CR4: 00000000007706e0 [ 540.911542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 540.918789] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 540.926032] PKRU: 55555554 [ 540.928790] Call Trace: [ 540.931276] <TASK> [ 540.933418] ice_napi_poll+0x4ca/0x6d0 [ice] [ 540.937804] ? __pfx_ice_napi_poll+0x10/0x10 [ice] [ 540.942716] napi_busy_loop+0xd7/0x320 [ 540.946537] xsk_recvmsg+0x143/0x170 [ 540.950178] sock_recvmsg+0x99/0xa0 [ 540.953729] __sys_recvfrom+0xa8/0x120 [ 540.957543] ? do_futex+0xbd/0x1d0 [ 540.961008] ? __x64_sys_futex+0x73/0x1d0 [ 540.965083] __x64_sys_recvfrom+0x20/0x30 [ 540.969155] do_syscall_64+0x38/0x90 [ 540.972796] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 540.977934] RIP: 0033:0x7f6de5f27934 To fix this, set cached_ntc to first_desc so that at the end, when freeing/recycling buffers, descriptors from first to ntc are not missed. Fixes: 2fba7dc5 ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230531154457.3216621-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Xu Liang authored
The interrupt fix in commit 97a89ed1 should be applied on all variants of GPY2xx PHY and GPY115C. Fixes: 97a89ed1 ("net: phy: mxl-gpy: disable interrupts on GPY215 by default") Signed-off-by:
Xu Liang <lxu@maxlinear.com> Reviewed-by:
-
Yoshihiro Shimoda authored
Fix return value in the error path of rswitch_start_xmit(). If TX queues are full, this function should return NETDEV_TX_BUSY. Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20230529073817.1145208-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Linus Torvalds authored
Merge tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A single patch to use a flexible array rather than a zero-length one" * tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: Replace zero-length array with flexible-array member
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox fix from Jassi Brar: "Fix missing mutex unlock in mailbox-test" * tag 'mailbox-fixes-6.4-rc5' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mailbox-test: fix a locking issue in mbox_test_message_write()
-
Andreas Svensson authored
A switch held in reset by default needs to wait longer until we can reliably detect it. An issue was observed when testing on the Marvell 88E6393X (Link Street). The driver failed to detect the switch on some upstarts. Increasing the wait time after reset deactivation solves this issue. The updated wait time is now also the same as the wait time in the mv88e6xxx_hardware_reset function. Fixes: 7b75e49d ("net: dsa: mv88e6xxx: wait after reset deactivation") Signed-off-by:
Andreas Svensson <andreas.svensson@axis.com> Reviewed-by:
-
Gustavo A. R. Silva authored
Zero-length and one-element arrays are deprecated, and we are moving towards adopting C99 flexible-array members, instead. Address the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: sound/firewire/amdtp-stream.c: In function ‘build_it_pkt_header’: sound/firewire/amdtp-stream.c:694:17: warning: ‘generate_cip_header’ accessing 8 bytes in a region of size 0 [-Wstringop-overflow=] 694 | generate_cip_header(s, cip_header, data_block_counter, syt); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/firewire/amdtp-stream.c:694:17: note: referencing argument 2 of type ‘__be32[2]’ {aka ‘unsigned int[2]’} sound/firewire/amdtp-stream.c:667:13: note: in a call to function ‘generate_cip_header’ 667 | static void generate_cip_header(struct amdtp_stream *s, __be32 cip_header[2], | ^~~~~~~~~~~~~~~~~~~ This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/303 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/ZHT0V3SpvHyxCv5W@workSigned-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - Regression fix for overlong long timeouts during initialization on some Logitech Unifying devices (Bastien Nocera) - error handling and overflow fixes for Wacom driver (Denis Arefev, Jason Gerecke, Nikita Zhandarovich) * tag 'for-linus-2023060101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-hidpp: Handle timeout differently from busy HID: wacom: Add error check to wacom_parse_and_register() HID: google: add jewel USB id HID: wacom: avoid integer overflow in wacom_intuos_inout() HID: wacom: Check for string overflow from strscpy calls
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fix from Damien Le Moal: - Fix ata_find_dev() use of the device number to find a struct ata_device for a port. This addresses issues with some passthrough commands with libsas managed devices. * tag 'ata-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-scsi: Use correct device no in ata_find_dev()
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: "Eight server fixes (most also for stable): - Two fixes for uninitialized pointer reads (rename and link) - Fix potential UAF in oplock break - Two fixes for potential out of bound reads in negotiate - Fix crediting bug - Two fixes for xfstests (allocation size fix for test 694 and lookup issue shown by test 464)" * tag '6.4-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd: ksmbd: call putname after using the last component ksmbd: fix incorrect AllocationSize set in smb2_get_info ksmbd: fix UAF issue from opinfo->conn ksmbd: fix multiple out-of-bounds read during context decoding ksmbd: fix slab-out-of-bounds read in smb2_handle_negotiate ksmbd: fix credit count leakage ksmbd: fix uninitialized pointer read in smb2_create_link() ksmbd: fix uninitialized pointer read in ksmbd_vfs_rename() -
Paolo Abeni authored
David Howells says: ==================== splice, net: Handle MSG_SPLICE_PAGES in Chelsio-TLS Here are patches to make Chelsio-TLS handle the MSG_SPLICE_PAGES internal sendmsg flag. MSG_SPLICE_PAGES is an internal hint that tells the protocol that it should splice the pages supplied if it can. Its sendpage implementation is then turned into a wrapper around that. ==================== Link: https://lore.kernel.org/r/20230531110008.642903-1-dhowells@redhat.comSigned-off-by:
-
David Howells authored
Convert chtls_sendpage() to use sendmsg() with MSG_SPLICE_PAGES rather than directly splicing in the pages itself. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Ayush Sawal <ayush.sawal@chelsio.com> cc: "David S. Miller" <davem@davemloft.net> cc: Eric Dumazet <edumazet@google.com> cc: Jakub Kicinski <kuba@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: netdev@vger.kernel.org Signed-off-by:
-
David Howells authored
Make Chelsio's TLS offload sendmsg() support MSG_SPLICE_PAGES, splicing in pages from the source iterator if possible and copying the data in otherwise. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Signed-off-by:
-
