- 27 Nov, 2011 1 commit
-
-
Dan Carpenter authored
The CS420X_IMAC27 was copied from the line before but CS420X_APPLE was clearly intented. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 23 Nov, 2011 4 commits
-
-
Takashi Iwai authored
Use an inline function for the common pattern for assigning a capsrc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(), the initialization of index field is missing. It may work without it casually when the original imux was created by the auto-parser, but it's definitely broken in the case of static configs where no imux was parsed beforehand. Because of this, the auto-mic switching doesn't work properly on some model options. This patch adds the missing initialization of index field. Reported-by: Dmitry Nezhevenko <dion@inhex.net> Cc: <stable@kernel.org> [v3.1] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The PCI SSID 8086:7270 is commonly used for multiple Apple machines, thus we can't use it as identifier for a unique model. Because of this conflict, some machines show weird behavior. For example, MacBook Air shows Front and Surround speakers although only Surround works due to the wrongly overridden pin-configuration for imac27. This patch fixes two things: - Stop the wrong pin-config override of imac27 by removing PCI SSID entry for avoiding the wrong mappings, - Add the generic GPIO setup for Apple machines by checking the codec SSID vendor bits Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
In snd_hda_check_board_codec_sid_config(), not only comparing with the exact value but allow the bit-mask comparison for vendor-only, etc. Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 22 Nov, 2011 5 commits
-
-
Wu Fengguang authored
With the ELD repoll mechanism, we can (and should) fail the ELD reading immediately when find something obviously wrong and let the caller retry after some delay. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Tim Blechmann authored
commit 6175ddf0 optimized the mem*io functions that have been used to send commands to the device. these optimizations somehow corrupted the communication with the lx6464es, that resulted the device to be unusable with kernels after 2.6.33. this patch emulates the memcpy_*_io functions via a loop to avoid these problems. Signed-off-by: Tim Blechmann <tim@klingt.org> LKML-Reference: <4ECB5257.4040600@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Tim Blechmann authored
the command buffer is only accessed from one file, so we can declare the specific functions as static in that file Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
Improve the one-shot ELD repoll to up to 6 retries. Up to now the 300ms looks sufficient for the test boxes. However I'm a bit worried about how well it can fit the wider user base. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
Commit c09403dc has introduced a regression: PCIe versions of RME MADI were no longer detected, because the MADIface ID (0xd5) was used instead of the correct 0xd2. This commit fixes the problem. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 21 Nov, 2011 1 commit
-
-
Dan Carpenter authored
desc->size is supposed to be a le16 type. On a big endian system the current code will set ->size to zero. We fixed a similar bug on the next line but missed this one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 19 Nov, 2011 1 commit
-
-
Takashi Iwai authored
Reported-by: Albert Pool <albertpool@solcon.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 16 Nov, 2011 5 commits
-
-
Takashi Iwai authored
spec->cur_adc isn't set until cs_capture_pcm_prepare() is called although the driver tries to select the connection at init time and at auto-mic switch. This results in the access to the widget NID 0, which is obviously invalid, also a wrong capture source. This patch fixes the issue by issuing the connect-select verb conditionally at appropriate places. Reported-and-tested-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Some stuff was moved from kernel.org to other places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
It looks more natural and saves two lines of code. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
The Intel HDMI chips (ironlake at least) are found to have ~250ms delay between the ELD_Valid=1 hotplug event is send and the ELD buffer becomes actually readable. During the time the ELD buffer is mysteriously all 0. Fix it by scheduling a delayed work to re-read ELD buffer after 300ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
memset(eld) clears eld->proc_entry which will leak the struct snd_info_entry when unloading module. Fix it by - memset only the fields before eld->eld_buffer - set eld->eld_valid to true _after_ all eld fields have been filled Cc: <stable@kernel.org> Cc: Pierre-louis Bossart <pierre-louis.bossart@intel.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Nov, 2011 1 commit
-
-
Jesper Juhl authored
Having just one semicolon after a break statement is enough. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 11 Nov, 2011 1 commit
-
-
Charles Chin authored
Clean up and fix pwr_nids for 92HD71 / 73 / 83 family codecs; remove pwr_mapping which was incorrect. The original pwr_nids support of 92HD83xxx was incorrect and never actually worked before. Now we should have things working correctly without having to hack by DID anymore. It is also not necessary to explicitly turn on all the pins near the beginning of patch_stac92hd83xxx() now, the pins will go though initialization properly. Tested on 92HD66 / 71 / 73 / 75 / 83 / 89 / 91 demo boards. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 10 Nov, 2011 5 commits
-
-
Takashi Iwai authored
-
Thomas Meyer authored
Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
We disabled the check of NO_PRESENCE bit of the default pin-config in commit f4419172 temporarily. One problem was that the first implementation was wrong -- the bit after the shift must be checked. However, this would still give many regressions on machines with broken BIOS. They set this bit wrongly even on active pins. A workaround is to check whether all pins contain this bit. As far as I've checked, broken BIOSen set this bit on all pins, no matter whether active or not. In such a case, the driver should ignore this bit check. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When freeing the vmaster master element, we should release slave-links properly, not only assumig that slaves will be freed soon later. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When a virtual mater control is created, the driver looks for slave elements from the assigned card instance. But this may include the elements of other codecs when multiple codecs are on the same HD-audio bus. This works at the first time, but it'll give Oops when it's once freed and re-created via reconfig sysfs. This patch changes the element-look-up strategy to limit only to the mixer elements of the same codec. Reported-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 09 Nov, 2011 6 commits
-
-
Konstantin Ozerkov authored
Detection code improved by PCI SSID usage. VM optimization now enabled only for known devcices (skip host devices forwarded to VM by VT-d or same kind of technology). For debug/troubleshooting purposes optimization can be forced (on/off) by module parameter: "inside_vm" (boolean). Known devices (PCI SSID): 1af4:1100: Reserved for KVM devices. Note this is not yet implemented for KVM's ICH/AC'97 emulation. 1ab8:xxxx: Parallels ICH/AC'97 emulated sound. [ fixed a minor coding-style issue by tiwai] Signed-off-by: Konstantin Ozerkov <kozerkov@parallels.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Konstantin Ozerkov authored
This is refactoring patch: preparation for add improved detection code. Now all detection code placed in one place. Signed-off-by: Konstantin Ozerkov <kozerkov@parallels.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Alexey Fisher authored
Logitech HD Webcam c510 provide wrong mixer resolution. Add it to "res = 384" quirk. Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Julian Wollrath authored
Fix the not working internal mic on Dell Vostro 3500 laptop by introducing the new model dell-vostro-3500. Signed-off-by: Julian Wollrath <jwollrath@web.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
David Henningsson authored
According to the bug reporter, model=auto is needed to make the internal microphone work. BugLink: https://bugs.launchpad.net/bugs/819699 Reported-by: Andrej (agno01) Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 08 Nov, 2011 6 commits
-
-
Takashi Iwai authored
In the recent usb-audio driver, the initialization of volume ranges may be delayed when the device doesn't respond well at the probing time. But the volume quirks for certain devices are applied only in mixer_ctl_feature_info() thus only at the very first probe and will be missing when the volume range is initialized later. This patch moves the volume quirk code to be always called from the volume-range extraction (get_min_max()), so that the quirks are properly applied in the later init time. Reported-and-tested-by: Alexey Fisher <bug-track@fisher-privat.net> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
-
Takashi Iwai authored
When a Realtek codec has a matrix-style capture-source selection, we need to scan all connections instead of only imux items. Otherwise some input might be kept unmuted. Although the corresponding input must be dead so there should be no input from it, it's still safer to mute the route completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Denis V. Lunev authored
The recently merged 228cf793 looks a bit hackish while it is not. The change was quite simple. In a virtualized environment the patch unhacks old kludge introduced for old broken AC97 hardware. This patch adds proper comment to "unkludge" code. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Konstantin Ozerkov <kozerkov@parallels.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Linus Torvalds authored
.. with new name. Because nothing says "really solid kernel release" like naming it after an extinct animal that just happened to be in the news lately.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omapLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ...
-
- 07 Nov, 2011 4 commits
-
-
Al Viro authored
Mountpoint crossing is similar to following procfs symlinks - we do not get ->d_revalidate() called for dentry we have arrived at, with unpleasant consequences for NFS4. Simple way to reproduce the problem in mainline: cat >/tmp/a.c <<'EOF' #include <unistd.h> #include <fcntl.h> #include <stdio.h> main() { struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1}; if (fcntl(0, F_SETLK, &fl)) perror("setlk"); } EOF cc /tmp/a.c -o /tmp/test then on nfs4: mount --bind file1 file2 /tmp/test < file1 # ok /tmp/test < file2 # spews "setlk: No locks available"... What happens is the missing call of ->d_revalidate() after mountpoint crossing and that's where NFS4 would issue OPEN request to server. The fix is simple - treat mountpoint crossing the same way we deal with following procfs-style symlinks. I.e. set LOOKUP_JUMPED... Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Fix live annotation in the --stdio interface perf top tui: Don't recalc column widths considering just the first page perf report: Add progress bar when processing time ordered events perf hists browser: Warn about lost events perf tools: Fix a typo of command name as trace-cmd perf hists: Fix recalculation of total_period when sorting entries perf header: Fix build on old systems perf ui browser: Handle K_RESIZE in dialog windows perf ui browser: No need to switch char sets that often perf hists browser: Use K_TIMER perf ui: Rename ui__warning_paranoid to ui__error_paranoid perf ui: Reimplement the popup windows using libslang perf ui: Reimplement ui__popup_menu using ui__browser perf ui: Reimplement ui_helpline using libslang perf ui: Improve handling sigwinch a bit perf ui progress: Reimplement using slang perf evlist: Fix grouping of multiple events
-
Tony Lindgren authored
-
Tony Lindgren authored
Commit 32aaeffb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
-