- 24 Feb, 2022 18 commits
-
-
Akira Yokosawa authored
Use past tense as the fonts can be installed after the fact. Add suggestion to install "Noto Sans CJK" and "Noto Serif CJK" font families. ("Noto Serif CJK" is optional.) Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/dfefa601-c58d-c86c-953f-5e4454db9409@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Akira Yokosawa authored
Expand comments in LaTeX code and mention some of important points told in changelogs of conf.py changes. Hopefully they can help future contributors in this area. No code change involved. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/bce9261b-1950-3146-07b2-07bd2ec79158@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Akira Yokosawa authored
Quote from Jon's remark [1]: I do notice that Documentation/conf.py is getting large and unapproachable. At some future point, it might be nice to pull all of the latex stuff out into a separate file where it won't scare people who stumble into it by accident. Pull LaTeX preamble settings added since commit 3b4c9632 ("docs: conf.py: adjust the LaTeX document output") out into sphinx/kerneldoc-preamble.sty. It will be copied to the build directory by the added "latex_additional_files" setting in conf.py. As a bonus, LaTeX/TeX code can be maintained without escaping backslashes. To compensate the loss of change history in sphinx/kerneldoc-preamble.sty, here is a list of changes made in conf.py: - f7ebe6b7 ("docs: Activate exCJK only in CJK chapters") - 0afd4df0 ("docs: pdfdocs: Prevent column squeezing by tabulary") - 659653c9 ("docs: pdfdocs: Refactor config for CJK document") - e291ff6f ("docs: pdfdocs: Add CJK-language-specific font settings") - 7eb368cc ("docs: pdfdocs: Choose Serif font as CJK mainfont if possible") - 35382965 ("docs: pdfdocs: Preserve inter-phrase space in Korean translations") - 77abc2c2 ("docs: pdfdocs: One-half spacing for CJK translations") - 788d28a2 ("docs: pdfdocs: Permit AutoFakeSlant for CJK fonts") - 29ac9822 ("docs: pdfdocs: Teach xeCJK about character classes of quotation marks") - 7c5c18bd ("docs: pdfdocs: Fix typo in CJK-language specific font settings") - aa872e06 ("docs: pdfdocs: Adjust \headheight for fancyhdr") - 8716ef41 ("docs: pdfdocs: Tweak width params of TOC") - 66939df5 ("docs: pdfdocs: Switch default CJK font to KR variants") - 7b686a2e ("docs: pdfdocs: Enable CJKspace in TOC for Korean titles") - 5d9158e3 ("docs/translations: Skip CJK contents if suitable fonts not found") - b774cc46 ("docs: pdfdocs: Move CJK monospace font setting to main conf.py") [1]: https://lore.kernel.org/all/87zgmr66cn.fsf@meer.lwn.net/Suggested-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/aaa9dca1-27c0-c414-77f3-c5587db0cc5b@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Naohiro Aota authored
__make_request() and end_that_request_last() do no longer exist. Replace them with the current call-site. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviwed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220222012751.1933194-1-naohiro.aota@wdc.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Yixuan Cao authored
There are some words that need to be fixed. Thanks for Shuah Khan's constructive suggestions. The text has been fixed as follows. a. So, if you'd like to use it, you need to add "page_owner=on" into your boot cmdline. Here, "into" has been replaced with "to". b. ...page owner is disabled in runtime due to no enabling, boot option, runtime overhead is marginal. Here, "no" has been replaced with "not". Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220223134104.2663-1-caoyixuan2019@email.szu.edu.cnSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Akira Yokosawa authored
Currently, when there is no FILE argument following a switch such as -man, -rst, or -none, kernel-doc exits with a warning from perl (long msg folded): Use of uninitialized value $ARGV[0] in pattern match (m//) at ./scripts/kernel-doc line 438. , which is unhelpful. Improve the behavior by adding a check at the bottom of parsing loop. If the argument is absent, display help text and exit with the code of 1 (via usage()). Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/7b136049-a3ba-0eb5-8717-364d773ff914@gmail.com [jc: reworked to fix conflict with pod patches] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
I wanted to clean up these lines, but in the end decided not to touch the old ones and just add my own about POD. I'll leave the cleanup for lawyers. Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-12-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
What for? To improve the script maintainability. 1. License As stated by Jonathan Corbet in the reply to my version 1, the SPDX line is enough. 2. The to-do list comment As suggested by Jonathan Corbet in reply to my version 3, this section doesn't need to be transitioned. And so it is removed for clarity. 3. The historical changelog comments As suggested by Jonathan Corbet in a reply to v3, this section can go. I wanted to keep it, but since it doesn't contain copyright notices, let's just have it clean and simple. 4. The "format of comments" comment block As suggested by Jani Nikula in a reply to my first version of this transformation, Documentation/doc-guide/kernel-doc.rst can serve as the information hub for comment formatting. The section DESCRIPTION already points there, so the original comment block can just be removed. Suggested-by: Jonathan Corbet <corbet@lwn.net> Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-11-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
Aim: unified POD, user more satisfied, script better structured You can see the results with: $ scripts/kernel-doc -help Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-10-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
Aim: unified POD, user more satisfied, script better structured Notes: - The -help token is added. - The entries are sorted alphbetically. Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-9-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
Aim: unified POD, user more satisfied, script better structured A subsection "reStructuredText only" is added for -enable-lineno. Other notes: - paragraphing correction Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-8-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
Aim: unified POD, user more satisfied, script better structured The plurals in -function and -nosymbol are corrected to singulars. That's how the script works now. I think this describes the syntax better. The plurar suggests multiple FILE arguments might be possible. So this seems more coherent. Other notes: - paragraphing correction - article correction Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-7-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
Aim: unified POD, user more happy This section is renamed to "Output format modifiers" to make it simple. To make it even more simple, a subsection is added: "reStructuredText only". Other notes: - paragraphing correction - article correction Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-6-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
Another step in the direction of a uniform POD documentation, which will make users happier. Options land at the end of the script, not to clutter the file top. The default output format is corrected to rst. That's what it is now. A POD delimiting comment is added to the script head, which improves the script logical structure. Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-5-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
Transition the description section into POD. This is one of the standard documentation sections. This adjustment makes the section available for POD and makes it look better. Notes: - an article addition - paragraphing correction Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-4-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
The former usage function is substituted, although not as the -h and -help parameter handler yet. Purpose: Use Pod::Usage to handle documentation printing in an integrated way. Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-3-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tomasz Warniełło authored
The NAME section provides the doc title, while SYNOPSIS contains the basic syntax and usage description, which will be printed in the help document and in the error output produced on wrong script usage. The rationale is to give users simple and succinct enlightment, at the same time structuring the script internally for the maintainers. In the synopsis, Rst-only options are grouped around rst, and the rest is arranged as in the OPTIONS subsections (yet to be translated into POD, check at the end of the series). The third of the basic sections, DESCRIPTION, is added separately. Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-2-tomasz.warniello@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Oscar Shiang authored
There are 2 duplicated words found in osnoise tracer documentation. This patch removes them. Signed-off-by: Oscar Shiang <oscar0225@livemail.tw> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Link: https://lore.kernel.org/r/TYCP286MB1913117487F390E3BCE38B15A1399@TYCP286MB1913.JPNP286.PROD.OUTLOOK.COMSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
- 17 Feb, 2022 1 commit
-
-
Jonathan Corbet authored
Akira says: This series resolves issues listed below: 1. Some of chapter and section counts in Table of Contents (TOC) in large PDF docs collide with chapter/section titles, e.g., Chapters 10, 11, 12, and 13 and Section 10.10 in userspace-api.pdf. 2. In docs of more than 99 pages, page counts in TOC are not aligned properly when maxdepth >= 2 is specified in toctree, e.g., Chapters 10, 12, and 13 in userspace-api.pdf 3. In TOC of Latin-script docs, quotation and apostrophe symbols look too wide, e.g., Section 2.2 in userspace-api.pdf. 4. In TOC of translations, Korean chapter titles lose inter-phrase spaces. 5. On systems without "Noto Sans CJK" fonts, CJK chapters in translations results in full of "TOFU" boxes, with a long build time and a large log file containing lots of missing-font warnings. 6. In translations.pdf built by "make pdfdocs", ascii-art diagrams in CJK are not aligned properly.
-
- 15 Feb, 2022 10 commits
-
-
Akira Yokosawa authored
As LaTeX macros for CJK font settings can have Latin-script font settings as well, settings under Documentation/translations/ can be moved to the main conf.py. By this change, translations.pdf built by top-level "make pdfdocs" can have properly aligned ascii-art diagrams except for Korean ones. For the reason of remaining misalignment in Korean diagrams, see changelog of commit a90dad8f ("docs: pdfdocs: Add conf.py local to translations for ascii-art alignment"). Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/eb87790a-03f4-9f29-c8a3-ef2c3e78ca18@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Akira Yokosawa authored
On systems without "Noto Sans CJK" fonts, CJK chapters in translations.pdf are full of "TOFU" boxes, with a long build time and a large log file containing lots of missing-font warnings. Avoid such waste of time and resources by skipping CJK chapters when CJK fonts are not available. To skip whole chapters, change the definition of \kerneldocBegin{SC|TC|KR|JP} commands so that they can have an argument to be ignored. This works as far as the argument (#1) is not used in the command. In place of skipped contents, put a note on skipped contents at the beginning of the PDF. Change the call sites in index.rst of CJK translations accordingly. When CJK fonts are available, existing command definitions with no argument just work. LaTeX engine will see additional pairs of "{" and "}", which add a level of grouping without having any effect on typesetting. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/3359ca41-b81d-b2c7-e437-7618efbe241d@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Akira Yokosawa authored
Korean (Hangul) titles in Table of Contents of translations.pdf don't have inter-phrase spaces. This is because the CJKspace option of xeCJK is disabled by default. Restore the spaces by enabling the option at the beginning of every document and disable it in the \kerneldocBegin{SC|TC|JP} commands. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/19141b3e-01d9-1f6d-5020-42fbda784831@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Akira Yokosawa authored
xeCJK is enabled in Table of Contents (TOC) so that translations.pdf built by top-level "make pdfdocs" can have its TOC typeset properly. This causes quotation marks and apostrophe symbols appear too wide in Latin-script docs. This is because (1) Sphinx converts ASCII symbols into multi-byte UTF-8 ones in LaTeX and (2) in the SC variant of "Noto CJK" font families, those UTF-8 symbols have full-width glyph. The KR variant of the font families has half-width glyph for those symbols and TOC pages should look nicer when it is used instead. Switch the default CJK font families to the KR variant and teach xeCJK of those symbols' widths. To compensate the switch, teach xeCJK of the width in the SC and TC variants. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/0c8ea878-0a6f-ea01-ab45-4e66c5facee9@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Akira Yokosawa authored
Sphinx has its own set of width parameters of Table of Contents (TOC) for LaTeX defined in its class definition of sphinxmanual.cls. It also inherits parameters for chapter entries from report.cls of original LaTeX base. However, they are optimized assuming small documents with tens of pages and chapters/sections of less than 10. To cope with some of kernel-doc documents with more than 1000 pages and several tens of chapters/sections, definitions of those parameters need to be adjusted. Unfortunately, those parameters are hard coded in the class definitions and need low-level LaTeX coding tricks to redefine. As Sphinx 1.7.9 does not have \sphinxtableofcontentshook, which defines those parameters in later Sphinx versions, for compatibility with both pre-1.8 and later Sphinx versions, empty the hook altogether and redefine \@pnumwidth, \l@chapter, \l@section, and \@subsection commands originally defined in report.cls. Summary of parameter changes: Width of page number (\@pnumwidth): 1.55em -> 2.7em Width of chapter number: 1.5em -> 1.8em Indent of section number: 1.5em -> 1.8em Width of section number: 2.6em -> 3.2em Indent of subsection number: 4.1em -> 5em Width of subsection number: 3.5em -> 4.3em Notes: 1. Parameters for subsection become relevant only when ":maxdepth: 3" is specified under "toctree::" (e.g., RCU/index.rst). They can hold subsection numbers up to 5 digits such as "18.7.13" (in RCU.pdf). 2. Number of chapters in driver-api.pdf is getting closer to 100. When it reaches 100, another set of tweaks will be necessary. 3. The low-level LaTeX trick is mentioned in "Unofficial LaTeX2e reference manual" at: http://latexref.xyz/Table-of-contents-etc_002e.htmlSigned-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/e52b4718-7909-25be-fbc1-76800aa62ae3@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Ethan Dye authored
This fixes some simple grammar errors in the documentation for zram, specifically errors in the optional feature section of the zram documentation. Signed-off-by: Ethan Dye <mrtops03@gmail.com> Link: https://lore.kernel.org/r/20220207235442.95090-1-mrtops03@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tang Yizhou authored
Translate scheduler/sched-energy.rst into Chinese. Signed-off-by: Tang Yizhou <tangyizhou@huawei.com> Reviewed-by: Alex Shi <alexs@kernel.org> Reviewed-by: Yanteng Si <siyanteng@loongson.cn> Link: https://lore.kernel.org/r/20220208020105.14117-1-tangyizhou@huawei.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tang Yizhou authored
Translate power/energy-model.rst into Chinese. Signed-off-by: Tang Yizhou <tangyizhou@huawei.com> Reviewed-by: Alex Shi <alexs@kernel.org> Link: https://lore.kernel.org/r/20220208133716.24070-1-tangyizhou@huawei.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Pali Rohár authored
Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20220210192200.30828-1-pali@kernel.orgSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Frank Rowand authored
Add the spec version to the title line. Explain likely source of "Unknown lines". "Unknown lines" in nested tests are optionally indented. Add "Unknown lines" items to differences between TAP & KTAP list Convert "Major differences between TAP and KTAP" from a bullet list to a table. The bullet list was being formatted as a single paragraph. Reviewed-by: Tim Bird <Tim.Bird@sony.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Link: https://lore.kernel.org/r/20220210233630.3304495-1-frowand.list@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
- 14 Feb, 2022 1 commit
-
-
Akira Yokosawa authored
It turns out that LaTeX enables \write18, which allows (some) shell commands to be executed from the document source, by default. This the often-seen warning during a pdfdocs build: restricted \write18 enabled That is a potential security problem and is entirely unnecessary; nothing in the kernel PDF docs build needs that capability. So disable \write18 explicitly. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/519bd2d9-1bee-03e1-eeb4-d9883c18be0c@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
- 10 Feb, 2022 5 commits
-
-
Jonathan Corbet authored
PDF-generation improvements from Akira Yokasawa; Akira says: This patch set improves conversions of DOT -> PDF and SVG -> PDF for PDF docs. * DOT -> PDF conversion Current scheme uses "dot -Tpdf" (of graphviz). Cons: - openSUSE's dot(1) does not support -Tpdf. - Other distro's dot(1) generates PDFs with unnecessarily wide margins for inclusion into LaTeX docs. Patch 1/4 changes the route to the following two steps: 1. DOT -> SVG by "dot -Tsvg" 2. SVG -> PDF by "rsvg-convert -f pdf" with fallback to convert(1) Pros: - Improved portability across distros - Less space around graphs in final PDF documents Con: - On systems without rsvg-convert, generated PDF will be of raster image. Patch 2/4 avoids raster-image PDF by using "dot -Tpdf" on systems where the option is available. * SVG -> PDF conversion Current scheme uses convert(1) (of ImageMagick) Cons: - Generated PDFs are of raster image. Some of them look blurry. - Raster images tend to be large in size. - convert(1) delegates SVG decoding to rsvg-convert(1). It doesn't cover full range of Inkscape-specific SVG features and fails to convert some of SVG figures properly. Improper conversions are observed with SVGs listed below (incomplete, conversion quality depends on the version of rsvg-convert): - Documentation/userspace-api/media/v4l/selection.svg - Documentation/userspace-api/media/v4l/vbi_525.svg - Documentation/userspace-api/media/v4l/vbi_625.svg - Documentation/userspace-api/media/v4l/vbi_hsync.svg - Documentation/admin-guide/blockdev/drbd/DRBD-8.3-data-packets.svg - Documentation/admin-guide/blockdev/drbd/DRBD-data-packages.svg If you have Inkscape installed as well, convert(1) delegates SVG decoding to inkscape(1) rather than to rsvg-convert(1) and SVGs listed above can be rendered properly. So if Inkscape is required for converting those SVGs properly, why not use it directly in the first place? Patches 3/4 and 4/4 add code to utilize inkscape(1) for SVG -> PDF conversion when it is available. They don't modify any existing requirements for kernel-doc. Patch 3/4 adds the alternative route of SVG -> PDF conversion by inkscape(1). Patch 4/4 delegates warning messages from inkscape(1) to kernellog.verbose as they are likely harmless in command-line uses. Pros: - Generated PDFs are of vector graphics. - Vector graphics tends to be smaller in size and looks nicer when zoomed in. - SVGs drawn by Inkscape are fully supported. On systems without Inkscape, no regression is expected by these two patches.
-
Akira Yokosawa authored
Depending on its version, distro config, and system-setup type, inkscape(1) emits various warning messages which are harmless in command-line uses. List of such warning messages (incomplete, long ones wrapped): - Gtk-Message: hh:mm:ss.nnn: Failed to load module "canberra-gtk-module" - Unable to init server: Could not connect: Connection refused - Failed to get connection - ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_proxy_new_for_name: assertion 'connection != NULL' failed - ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_proxy_call: assertion 'DBUS_IS_G_PROXY (proxy)' failed - ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_connection_register_g_object: assertion 'connection != NULL' failed - ** (inkscape:xxx): WARNING **: hh:mm:ss.nnn: Fonts dir '/usr/share/inkscape/fonts' does not exist and will be ignored. To avoid unnecessary anxiety, capture the message and output it via kernellog.verbose or kernellog.warn depending on the exit code. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/e26a7b53-9155-8394-4a31-6006379b65a5@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Akira Yokosawa authored
Using convert(1) of ImageMagick for SVG -> PDF conversion results in PDFs containing raster (bitmap) images which sometimes look blurry. Ideally speaking, SVG to PDF conversion should retain vector graphics in SVG. rsvg-convert(1) can do such conversions with regard to SVG files generated by dot(1). Unfortunately, rsvg-convert(1) does not cover some of SVG features specific to Inkscape. inkscape(1) of Inkscape naturally covers such SVG features. So add a route in svg2pdf() so that inkscape(1) is used when it is available. Note: After this change, if you have Inkscape installed, ImageMagick nor librsvg are not required. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/3eea2a8d-c52d-ee07-cf7b-83784c6f6e4b@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Akira Yokosawa authored
To prevent any regression on existing build systems, limit the fallback of converting DOT -> raster PDF only when both of the following conditions are met. o dot(1) doesn't support -Tpdf o rsvg-convert(1) is not found While we are here, add kernellog.verbose messages related to rsvg-convert, 'dot -Tpdf', and 'dot -Tsvg' commands. Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/e76f61e1-7366-ba00-b119-8ea6a2499861@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Akira Yokosawa authored
On openSUSE, dot(1) command does not support direct PDF output. On other distros, generated PDF images have unnecessarily wide margins, especially for small graphs. By using dot(1) for DOT -> SVG, then rsvg-convert(1) for SVG -> PDF, more optimal PDF images can be obtained, with the bonus of improved portability across various distros. Add rules in kfigure.py so that the above mentioned route is taken when rsvg-convert(1) is available. Note that rsvg-convert(1) is recommended by sphinx_pre_install. So it is most likely that existing systems for building pdfdocs have rsvg-convert(1) installed. Note: SVG features supported by rsvg-convert(1) vary depending on its version and distro config. For example, the one found on Ubuntu Bionic (version 2.40.20) does poor job in rendering some of SVG files drawn by Inkscape. SVG files generated by dot(1) are converted nicely even with such old versions of rsvg-convert. So this change does not affect the quality of such figures in any way. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/15b56dd3-081a-2469-c3a4-dfc1ca4c6c2d@gmail.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
- 01 Feb, 2022 2 commits
-
-
Tang Yizhou authored
According to the function prototype of rebalance_domains(), its first parameter is *rq* and the document need to be updated. Signed-off-by: Tang Yizhou <tangyizhou@huawei.com> Link: https://lore.kernel.org/r/20211221031818.23186-1-tangyizhou@huawei.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Tang Yizhou authored
Translate core-api/rbtree.rst into Chinese. Signed-off-by: Tang Yizhou <tangyizhou@huawei.com> Reviewed-by: Alex Shi <alexs@kernel.org> Link: https://lore.kernel.org/r/20211225015146.1535-1-tangyizhou@huawei.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
- 27 Jan, 2022 3 commits
-
-
Andy Shevchenko authored
It's unclear from "Submitting Patches" documentation that Reported-by is not supposed to be used against new features. (It's more clear in the section 5.4 "Patch formatting and changelogs" of the "A guide to the Kernel Development Process", where it suggests that change should fix something existing in the kernel. Clarify the Reported-by usage in the "Submitting Patches". Reported-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220127163258.48482-1-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Yanteng Si authored
Translate .../vm/highmem.rst into Chenese. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Alex Shi <alexs@kernel.org> Link: https://lore.kernel.org/r/51e088d1e8659b9411534a5a3ad03d88c79a5297.1643246827.git.siyanteng@loongson.cnSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-
Yanteng Si authored
Translate .../vm/free_page_reporting.rst into Chinese. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Alex Shi <alexs@kernel.org> Link: https://lore.kernel.org/r/4ef77c1be8319fc45b18e9f4c41986095d794562.1643246827.git.siyanteng@loongson.cnSigned-off-by: Jonathan Corbet <corbet@lwn.net>
-