- 01 Aug, 2018 5 commits
-
-
Gustavo A. R. Silva authored
There is a potential execution path in which variable *err* is returned without being properly initialized previously. Fix this by initializing variable *err* to 0. Addresses-Coverity-ID: 1472116 ("Uninitialized scalar variable") Fixes: 0ec13877 ("net/mlx5e: Gather all XDP pre-requisite checks in a single function") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Fixes the following sparse warning: drivers/net/ethernet/qlogic/qed/qed_cxt.c:1534:6: warning: symbol 'qed_cm_init_pf' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_dev.c:233:4: warning: symbol 'qed_init_qm_get_num_tcs' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_dev.c:238:5: warning: symbol 'qed_init_qm_get_num_vfs' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_dev.c:246:5: warning: symbol 'qed_init_qm_get_num_pf_rls' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_dev.c:264:5: warning: symbol 'qed_init_qm_get_num_vports' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_dev.c:276:5: warning: symbol 'qed_init_qm_get_num_pqs' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_mcp.c:573:5: warning: symbol 'qed_mcp_nvm_wr_cmd' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_mcp.c:3012:1: warning: symbol '__qed_mcp_resc_lock' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_dcbx.c:870:6: warning: symbol 'qed_dcbx_aen' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_debug.c:7841:5: warning: symbol 'qed_dbg_nvm_image_length' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_debug.c:7857:5: warning: symbol 'qed_dbg_nvm_image' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_sriov.c:675:6: warning: symbol '_qed_iov_pf_sanity_check' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_sriov.c:690:6: warning: symbol 'qed_iov_pf_sanity_check' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_sriov.c:3982:6: warning: symbol 'qed_iov_pf_get_pending_events' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_vf.c:172:5: warning: symbol '_qed_vf_pf_release' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_rdma.c:137:5: warning: symbol 'qed_rdma_get_sb_id' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_rdma.c:709:5: warning: symbol 'qed_rdma_stop' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_ll2.c:161:6: warning: symbol 'qed_ll2b_complete_rx_packet' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_roce.c:160:6: warning: symbol 'qed_roce_free_cid_pair' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_iwarp.c:380:12: warning: symbol 'iwarp_state_names' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_iwarp.c:946:1: warning: symbol 'qed_iwarp_parse_private_data' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_iwarp.c:971:1: warning: symbol 'qed_iwarp_mpa_reply_arrived' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_iwarp.c:2504:1: warning: symbol 'qed_iwarp_ll2_slowpath' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_iwarp.c:2806:6: warning: symbol 'qed_iwarp_qp_in_error' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_iwarp.c:2827:6: warning: symbol 'qed_iwarp_exception_received' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_iwarp.c:2958:1: warning: symbol 'qed_iwarp_connect_complete' was not declared. Should it be static? drivers/net/ethernet/qlogic/qed/qed_iscsi.c:876:6: warning: symbol 'qed_iscsi_free_connection' was not declared. Should it be static? Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Denis Bolotin <Denis.Bolotin@cavium.com> Signed-off-by:
-
Ka-Cheong Poon authored
This patch removes the IPv6 dependency from RDS. Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Ka-Cheong Poon authored
Currently, rds_ib_conn_alloc() calls rds_ib_recv_alloc_caches() without passing along the gfp_t flag. But rds_ib_recv_alloc_caches() and rds_ib_recv_alloc_cache() should take a gfp_t parameter so that rds_ib_recv_alloc_cache() can call alloc_percpu_gfp() using the correct flag instead of calling alloc_percpu(). Signed-off-by:
-
Ivan Khoronzhuk authored
Replace ugly macroses on functions. Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
- 31 Jul, 2018 8 commits
-
-
Christoph Hellwig authored
We never use RCU protection for it, just a lot of cargo-cult rcu_deference_protects calls. Note that we do keep the kfree_rcu call for it, as the references through struct sock are RCU protected and thus might require a grace period before freeing. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Jason Wang authored
We don't maintain tx counters in rx stats any more. There's no need for an extra container of rq stats. Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jason Wang authored
Commit 5b8f3c8d ("virtio_net: Add XDP related stats") tries to count TX XDP stats in virtnet_receive(). This will cause several issues: - virtnet_xdp_sq() was called without checking whether or not XDP is set. This may cause out of bound access when there's no enough txq for XDP. - Stats were updated even if there's no XDP/XDP_TX. Fixing this by reusing virtnet_xdp_xmit() for XDP_TX which can counts TX XDP counter itself and remove the unnecessary tx stats embedded in rx stats. Reported-by: syzbot+604f8271211546f5b3c7@syzkaller.appspotmail.com Fixes: 5b8f3c8d ("virtio_net: Add XDP related stats") Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== xsk: improvements to RX queue check and replace First 3 patches of my recent RFC. The first one make the check against real_num_rx_queues slightly more reliable, while the latter two redefine XDP_QUERY_XSK_UMEM slightly to disallow replacing UMEM in the driver at the stack level. I'm not sure where this lays on the bpf vs net trees scale, but there should be no conflicts with either tree. ==================== Acked-by:
Björn Töpel <bjorn.topel@intel.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Jakub Kicinski authored
Currently drivers have to check if they already have a umem installed for a given queue and return an error if so. Make better use of XDP_QUERY_XSK_UMEM and move this functionality to the core. We need to keep rtnl across the calls now. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Acked-by:
Björn Töpel <bjorn.topel@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Return early and only take the ref on dev once there is no possibility of failing. Signed-off-by:
-
Jakub Kicinski authored
We used to depend on real_num_rx_queues as a upper bound for sanity checks. For AF_XDP socket validation it's useful if the check behaves the same regardless of CONFIG_SYSFS setting. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
Commit 58b99ee3 ("net/mlx5e: Add support for XDP_REDIRECT in device-out side") forgot to return/free the xdp_frame in case the DMA mapping failed, correct this. Also DMA unmap the frame in case mlx5e_xmit_xdp_frame() fails. Fixes: 58b99ee3 ("net/mlx5e: Add support for XDP_REDIRECT in device-out side") Signed-off-by:
-
- 30 Jul, 2018 21 commits
-
-
Yidong Ren authored
This patch implements following ethtool stats fields for netvsc: cpu<n>_tx/rx_packets/bytes cpu<n>_vf_tx/rx_packets/bytes Corresponding per-cpu counters already exist in current code. Exposing these counters will help troubleshooting performance issues. for_each_present_cpu() was used instead of for_each_possible_cpu(). for_each_possible_cpu() would create very long and useless output. It is still being used for internal buffer, but not for ethtool output. There could be an overflow if cpu was added between ethtool call netvsc_get_sset_count() and netvsc_get_ethtool_stats() and netvsc_get_strings(). (still safe if cpu was removed) ethtool makes these three function calls separately. As long as we use ethtool, I can't see any clean solution. Currently and in foreseeable short term, Hyper-V doesn't support cpu hot-plug. Plus, ethtool is for admin use. Unlikely the admin would perform such combo operations. Changes in v2: - Remove cpp style comment - Resubmit after freeze Changes in v3: - Reimplemented with kvmalloc instead of alloc_percpu Changes in v4: - Fixed inconsistent array size - Use kvmalloc_array instead of kvmalloc Signed-off-by:
Yidong Ren <yidren@microsoft.com> Reviewed-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== A test for mirror-to-gretap with team in UL packet path This patchset adds a test for "tc action mirred mirror" where the mirrored-to device is a gretap, and underlay path contains a team device. In patch #1 require_command() is added, which should henceforth be used to declare dependence on a certain tool. In patch #2, two new functions, team_create() and team_destroy(), are added to lib.sh. The newly-added test uses arping, which isn't necessarily available. Therefore patch #3 introduces $ARPING, and a preexisting test is fixed to require_command $ARPING. In patches #4 and #5, two new tests are added. In both cases, a team device is on egress path of a mirrored packet in a mirror-to-gretap scenario. In the first one, the team device is in loadbalance mode, in the second one it's in lacp mode. (The difference in modes necessitates a different testing strategy, hence two test cases instead of just parameterizing one.) ==================== Signed-off-by: -
Petr Machata authored
This tests mirror-to-gretap when an underlay packet path includes a team device which is not in loadbalance mode, but in LACP mode. The test manipulates LAG membership to achieve changes in txability, thus making sure that a driver that offloads mirror-to-gretap doesn't just consider upness of a device. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Petr Machata authored
Test for "tc action mirred egress mirror" that mirrors to gretap when the underlay route points at a VLAN-aware bridge (802.1q), and the traffic egresses the bridge through a team device. Test upping and downing individual team device slaves and verify the traffic flows as expected. Signed-off-by:
-
Petr Machata authored
Instead of relying on "arping" being installed everywhere under that name, introduce a variable $ARPING like the other tools do. Convert an existing test, mirror_gre_vlan_bridge_1q.sh to require_command $ARPING and then invoke arping through the variable. Signed-off-by:
-
Petr Machata authored
Add team_create() and team_destroy() to manage team netdevices. Signed-off-by:
-
Petr Machata authored
The logic for testing whether a certain command is available is used several times in the current code base. The tests in follow-up patches add more requirements like that. Therefore extract the logic into a named function, require_command(), that can be used directly from lib.sh as well as from any test that wishes to declare dependence on some command. Signed-off-by:
-
YueHaibing authored
kfree(NULL) is safe,so this removes NULL check before freeing the mem Signed-off-by:
-
Quentin Schulz authored
The Extended Page Access is a 16-bit register, so change the page parameter of vsc85xx_phy_page_set to a u16. Signed-off-by:
Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Vakul Garg authored
On receipt of a complete tls record, use socket's saved data_ready callback instead of state_change callback. In function tls_queue(), the TLS record is queued in encrypted state. But the decryption happen inline when tls_sw_recvmsg() or tls_sw_splice_read() get invoked. So it should be ok to notify the waiting context about the availability of data as soon as we could collect a full TLS record. For new data availability notification, sk_data_ready callback is more appropriate. It points to sock_def_readable() which wakes up specifically for EPOLLIN event. This is in contrast to the socket callback sk_state_change which points to sock_def_wakeup() which issues a wakeup unconditionally (without event mask). Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== TC: refactor act_mirred packets re-injection This series is aimed at improving the act_mirred redirect performances. Such action is used by OVS to represent TC S/W flows, and it's current largest bottle-neck is the need for a skb_clone() for each packet. The first 2 patches introduce some cleanup and safeguards to allow extending tca_result - we will use it to store RCU protected redirect information - and introduce a clear separation between user-space accessible tcfa_action values and internal values accessible only by the kernel. Then a new tcfa_action value is introduced: TC_ACT_REINJECT, similar to TC_ACT_REDIRECT, but preserving the mirred semantic. Such value is not accessible from user-space. The last patch exploits the newly introduced infrastructure in the act_mirred action, to avoid a skb_clone, when possible. Overall this the above gives a ~10% performance improvement in forwarding tput, when using the TC S/W datapath. v1 -> v2: - preserve the rcu lock in act_bpf - add and use a new action value to reinject the packets, preserving the mirred semantic v2 -> v3: - renamed to new action as TC_ACT_REINJECT - TC_ACT_REINJECT is not exposed to user-space v3 -> v4: - dropped the TC_ACT_REDIRECT patch - report failure via extack, too - rename the new action as TC_ACT_REINSERT - skip clone only if the control action don't touch tcf_result v4 -> v5: - fix a couple of build issue reported by kbuild bot - dont split messages ==================== Signed-off-by: -
Paolo Abeni authored
When mirred is invoked from the ingress path, and it wants to redirect the processed packet, it can now use the TC_ACT_REINSERT action, filling the tcf_result accordingly, and avoiding a per packet skb_clone(). Overall this gives a ~10% improvement in forwarding performance for the TC S/W data path and TC S/W performances are now comparable to the kernel openvswitch datapath. v1 -> v2: use ACT_MIRRED instead of ACT_REDIRECT v2 -> v3: updated after action rename, fixed typo into the commit message v3 -> v4: updated again after action rename, added more comments to the code (JiriP), skip the optimization if the control action need to touch the tcf_result (Paolo) v4 -> v5: fix sparse warning (kbuild bot) Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Paolo Abeni authored
This is similar TC_ACT_REDIRECT, but with a slightly different semantic: - on ingress the mirred skbs are passed to the target device network stack without any additional check not scrubbing. - the rcu-protected stats provided via the tcf_result struct are updated on error conditions. This new tcfa_action value is not exposed to the user-space and can be used only internally by clsact. v1 -> v2: do not touch TC_ACT_REDIRECT code path, introduce a new action type instead v2 -> v3: - rename the new action value TC_ACT_REINJECT, update the helper accordingly - take care of uncloned reinjected packets in XDP generic hook v3 -> v4: - renamed again the new action value (JiriP) v4 -> v5: - fix build error with !NET_CLS_ACT (kbuild bot) Signed-off-by:
-
Paolo Abeni authored
Each lockless action currently does its own RCU locking in ->act(). This allows using plain RCU accessor, even if the context is really RCU BH. This change drops the per action RCU lock, replace the accessors with the _bh variant, cleans up a bit the surrounding code and documents the RCU status in the relevant header. No functional nor performance change is intended. The goal of this patch is clarifying that the RCU critical section used by the tc actions extends up to the classifier's caller. v1 -> v2: - preserve rcu lock in act_bpf: it's needed by eBPF helpers, as pointed out by Daniel v3 -> v4: - fixed some typos in the commit message (JiriP) Signed-off-by:
-
Paolo Abeni authored
Currently, when initializing an action, the user-space can specify and use arbitrary values for the tcfa_action field. If the value is unknown by the kernel, is implicitly threaded as TC_ACT_UNSPEC. This change explicitly checks for unknown values at action creation time, and explicitly convert them to TC_ACT_UNSPEC. No functional changes are introduced, but this will allow introducing tcfa_action values not exposed to user-space in a later patch. Note: we can't use the above to hide TC_ACT_REDIRECT from user-space, as the latter is already part of uAPI. v3 -> v4: - use an helper to check for action validity (JiriP) - emit an extack for invalid actions (JiriP) v4 -> v5: - keep messages on a single line, drop net_warn (Marcelo) Signed-off-by:
-
YueHaibing authored
There are no in-tree callers of cn23xx_dump_iq_regs. Signed-off-by:
-
David S. Miller authored
Christoph Hellwig says: ==================== socket poll related cleanups v2 A couple of cleanups I stumbled upon when studying the networking poll code. Changes since v1: - drop a dispute patch from this series (to be sent separately) ==================== Signed-off-by: -
Christoph Hellwig authored
Fold it into the only caller to make the code simpler and easier to read. Signed-off-by:
-
Christoph Hellwig authored
There is no point in hiding this logic in a helper. Also remove the useless events != 0 check and only busy loop once we know we actually have a poll method. Signed-off-by:
-
Christoph Hellwig authored
For any open socket file descriptor sock->sk->sk_wq->wait will always point to sock->wq->wait. That means we can do the shorter dereference and removal a NULL check and don't have to not worry about any RCU protection. Signed-off-by:
-
Christoph Hellwig authored
The wait_address argument is always directly derived from the filp argument, so remove it. Signed-off-by:
-
- 29 Jul, 2018 6 commits
-
-
YueHaibing authored
Replace calls to kmalloc followed by a memcpy with a direct call to kmemdup. Signed-off-by:
-
YueHaibing authored
Replace calls to kmalloc followed by a memcpy with a direct call to kmemdup. Signed-off-by:
-
YueHaibing authored
net/sched/act_pedit.c:289:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by:
-
YueHaibing authored
There are no in-tree callers of qed_get_cm_pq_idx_rl since it be there, so it can be removed. Signed-off-by:
-
Sean Wang authored
Since driver is devicetree-based, all device type and charateristic can be determined by the compatible string and its data. It's unnecessary to create another dependent function to check chip ID and then decide whether the specific funciton is being supported on a certain device. It can be totally replaced by the existing flag, so a cleanup is made by removing the function and the only user, HWLRO. MT2701 also have a missing HWLRO support in old code, so add it the same patch. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Sean Wang authored
Improve more in the existing code by reusing dma_zalloc_coherent instead of dma_alloc_coherent with __GFP_ZERO or superfluous zeroing buffer. Signed-off-by:
-
