Tracepoint events like lock_acquire and software counters like
pagefaults can recurse into the perf counter code again, avoid that.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090323172417.152096433@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Since the bitfields turned into a bit of a mess, remove them and rely on
good old masks.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090323172417.059499915@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In my system, it takes kerneltop dozens of minutes to
show up usable numbers. Make the default count 100 times
smaller fixed this long startup latency.

I'm not sure if it's the right solution though.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

- perfstat.c can be safely removed now
- perfstat: -s => -a for system wide accounting
- kerneltop: add -S/--stat for perfstat mode
- minor adjustments to kerneltop --help, perfstat --help
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

- can handle sw counters now
- the outputs will look slightly different
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

- kerneltop: --event_id => --event
- kerneltop: can accept SW event types now
- perfstat: it used to implicitly add event -2(task-clock),
	    the new code no longer does this. Shall we?
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kerneltop's MAX_COUNTERS is increased from 8 to 64(the value used by perfstat).
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Initial version of kerneltop.c and perfstat.c.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

We'll have more files in that directory, prepare for that.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: build fix for powerpc

Commit db3a944aca35ae61 ("perf_counter: revamp syscall input ABI")
expanded the hw_event.type field into a union of structs containing
bitfields.  In particular it introduced a type field and a raw_type
field, with the intention that the 1-bit raw_type field should
overlay the most-significant bit of the 8-bit type field, and in fact
perf_counter_alloc() now assumes that (or at least, assumes that
raw_type doesn't overlay any of the bits that are 1 in the values of
PERF_TYPE_{HARDWARE,SOFTWARE,TRACEPOINT}).

Unfortunately this is not true on big-endian systems such as PowerPC,
where bitfields are laid out from left to right, i.e. from most
significant bit to least significant.  This means that setting
hw_event.type = PERF_TYPE_SOFTWARE will set hw_event.raw_type to 1.

This fixes it by making the layout depend on whether or not
__BIG_ENDIAN_BITFIELD is defined.  It's a bit ugly, but that's what
we get for using bitfields in a user/kernel ABI.

Also, that commit didn't fix up some places in arch/powerpc/kernel/
perf_counter.c where hw_event.raw and hw_event.event_id were used.
This fixes them too.
Signed-off-by: Paul Mackerras <paulus@samba.org>

Impact: cleanup

This updates the powerpc perf_counter_interrupt following on from the
"perf_counter: unify irq output code" patch.  Since we now use the
generic perf_counter_output code, which sets the perf_counter_pending
flag directly, we no longer need the need_wakeup variable.

This removes need_wakeup and makes perf_counter_interrupt use
get_perf_counter_pending() instead.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194234.024464535@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: cleanup

Having 3 slightly different copies of the same code around does nobody
any good. First step in revamping the output format.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.929962222@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: modify ABI

The hardware/software classification in hw_event->type became a little
strained due to the addition of tracepoint tracing.

Instead split up the field and provide a type field to explicitly specify
the counter type, while using the event_id field to specify which event to
use.

Raw counters still work as before, only the raw config now goes into
raw_event.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.836807573@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: new perfcounters feature

Enable usage of tracepoints as perf counter events.

tracepoint event ids can be found in /debug/tracing/event/*/*/id
and (for now) are represented as -65536+id in the type field.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.744044174@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: fix crash during perfcounters use

I found another counter free path, create a free_counter() call to
accomodate generic tear-down.

Fixes an RCU bug.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.652078652@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: cleanup

Use the generic software events for context switches.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.283522645@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: fix boot crash

When doing the generic context switch event I ran into some early
boot hangs, which were caused by inf func recursion (event, fault,
event, fault).

I eventually tracked it down to event_list not being initialized
at the time of the first event. Fix this.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.195392657@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: build fix for powerpc

Commit bd753921015e7905 ("perf_counter: software counter event
infrastructure") introduced a use of TIF_PERF_COUNTERS into the core
perfcounter code.  This breaks the build on powerpc because we use
a flag in a per-cpu area to signal wakeups on powerpc rather than
a thread_info flag, because the thread_info flags have to be
manipulated with atomic operations and are thus slower than per-cpu
flags.

This fixes the by changing the core to use an abstracted
set_perf_counter_pending() function, which is defined on x86 to set
the TIF_PERF_COUNTERS flag and on powerpc to set the per-cpu flag
(paca->perf_counter_pending).  It changes the previous powerpc
definition of set_perf_counter_pending to not take an argument and
adds a clear_perf_counter_pending, so as to simplify the definition
on x86.

On x86, set_perf_counter_pending() is defined as a macro.  Defining
it as a static inline in arch/x86/include/asm/perf_counters.h causes
compile failures because <asm/perf_counters.h> gets included early in
<linux/sched.h>, and the definitions of set_tsk_thread_flag etc. are
therefore not available in <asm/perf_counters.h>.  (On powerpc this
problem is avoided by defining set_perf_counter_pending etc. in
<asm/hw_irq.h>.)
Signed-off-by: Paul Mackerras <paulus@samba.org>

Impact: fix boot crash on Intel Perfmon Version 1 systems

Intel Perfmon v1 does not support the global MSRs, nor does
it offer the generalized MSR ranges. So support v2 and later
CPUs only.

Also mark pmc_ops as read-mostly - to avoid false cacheline
sharing.

Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: build fix

In order to compile a kernel with performance counter patches,
<asm/irq_regs.h> has to be included to provide the declaration of
struct pt_regs *get_irq_regs(void);

[ This bug was masked by unrelated x86 header file changes in the
  x86 tree, but occurs in the tip:perfcounters/core standalone
  tree. ]
Signed-off-by: Tim Blechmann <tim@klingt.org>
Orig-LKML-Reference: <20090314142925.49c29c17@thinkpad>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: fix deadlock with perfstat

Fix for the perfstat fubar..

We cannot unconditionally call hrtimer_cancel() without ever having done
hrtimer_init() on the thing.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <1236959027.22447.149.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

I noticed that the counter_list only includes top-level counters, thus
perf_swcounter_event() will miss sw-counters in groups.

Since perf_swcounter_event() also wants an RCU safe list, create a new
event_list that includes all counters and uses RCU list ops and use call_rcu
to free the counter structure.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Use hrtimers to profile timer based sampling for the software time
counters.

This allows platforms without hardware counter support to still
perform sample based profiling.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Provide separate sw counters for major and minor page faults.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

We use the generic software counter infrastructure to provide
page fault events.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Provide generic software counter infrastructure that supports
software events.

This will be used to allow sample based profiling based on software
events such as pagefaults. The current infrastructure can only
provide a count of such events, no place information.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Fix a build warning on 32bit machines by explicitly marking the
constants as 64-bit.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

We need to ensure the enabled=0 write happens before we
start disabling the actual counters, so that a pcm_amd_enable()
will not enable one underneath us.

I think the race is impossible anyway, we always balance the
ops within any one context and perform enable() with IRQs disabled.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Instead of del/add use a move list-op.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

No need to assume the irq_period is 32bit.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: we have gathered quite a few conflicts, need to merge upstream

Conflicts:
	arch/powerpc/kernel/Makefile
	arch/x86/ia32/ia32entry.S
	arch/x86/include/asm/hardirq.h
	arch/x86/include/asm/unistd_32.h
	arch/x86/include/asm/unistd_64.h
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/irq.c
	arch/x86/kernel/syscall_table_32.S
	arch/x86/mm/iomap_32.c
	include/linux/sched.h
	kernel/Makefile
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'audit.b62' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  Audit: remove spaces from audit_log_d_path
  audit: audit_set_auditable defined but not used
  audit: incorrect ref counting in audit tree tag_chunk
  audit: Fix possible return value truncation in audit_get_context()
  audit: ignore terminating NUL in AUDIT_USER_TTY messages
  Audit: fix handling of 'strings' with NULL characters
  make the e->rule.xxx shorter in kernel auditfilter.c
  auditsc: fix kernel-doc notation
  audit: EXECVE record - removed bogus newline

* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: fix da903x warning
  mfd: fix MAINTAINERS entry
  mfd: Use the value of the final spin when reading the AUXADC
  mfd: Storage class should be before const qualifier
  mfd: PASIC3: supply clock_rate to DS1WM via driver_data
  mfd: remove DS1WM clock handling
  mfd: remove unused PASIC3 bus_shift field
  pxa/magician: remove deprecated .bus_shift from PASIC3 platform_data
  mfd: convert PASIC3 to use MFD core
  mfd: convert DS1WM to use MFD core
  mfd: Support active high IRQs on WM835x
  mfd: Use bulk read to fill WM8350 register cache
  mfd: remove duplicated #include from pcf50633

* 'for-linus' of git://repo.or.cz/cris-mirror:
  CRISv32: Remove extraneous space between -I and the path.
  cris: convert obsolete hw_interrupt_type to struct irq_chip
  BUG to BUG_ON changes
  cpumask: use mm_cpumask() wrapper: cris
  cpumask: Use accessors code.: cris
  cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.: cris

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits)
  ACPI: processor: use .notify method instead of installing handler directly
  ACPI: button: use .notify method instead of installing handler directly
  ACPI: support acpi_device_ops .notify methods
  toshiba-acpi: remove MAINTAINERS entry
  ACPI: battery: asynchronous init
  acer-wmi: Update copyright notice & documentation
  acer-wmi: Cleanup the failure cleanup handling
  acer-wmi: Blacklist Acer Aspire One
  video: build fix
  thinkpad-acpi: rework brightness support
  thinkpad-acpi: enhanced debugging messages for the fan subdriver
  thinkpad-acpi: enhanced debugging messages for the hotkey subdriver
  thinkpad-acpi: enhanced debugging messages for rfkill subdrivers
  thinkpad-acpi: restrict access to some firmware LEDs
  thinkpad-acpi: remove HKEY disable functionality
  thinkpad-acpi: add new debug helpers and warn of deprecated atts
  thinkpad-acpi: add missing log levels
  thinkpad-acpi: cleanup debug helpers
  thinkpad-acpi: documentation cleanup
  thinkpad-acpi: drop ibm-acpi alias
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: sh7785lcr: Map whole PCI address space.
  sh: Fix up DSP context save/restore.
  sh: Fix up number of on-chip DMA channels on SH7091.
  sh: update defconfigs.
  sh: Kill off broken direct-mapped cache mode.
  sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.
  sh: Add a command line option for disabling I/O trapping.
  sh: Select ARCH_HIBERNATION_POSSIBLE.
  sh: migor: Fix up CEU use flags.
  input: migor_ts: add wakeup support
  rtc: rtc-sh: use set_irq_wake()
  input: sh_keysc: use enable/disable_irq_wake()
  sh: intc: set_irq_wake() support
  sh: intc: install enable, disable and shutdown callbacks
  clocksource: sh_cmt: use remove_irq() and remove clockevent workaround
  sh: ap325 and Migo-R use new sh_mobile_ceu_info flags
  sh: Fix up -Wformat-security whining.
  sh: ap325rxa: Add ov772x support, again.
  sh: Sanitize asm/mmu.h for assembly use.
  sh: Tidy up sh7786 pinmux table.
  ...