Pull ACPI fix from Rafael Wysocki:
 "Fix the sorting of _CST output data in the ACPI processor idle driver
  (Kuan-Wei Chiu)"

* tag 'acpi-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: processor_idle: Fix invalid comparison with insertion sort for latency

Pull power management fixes from Rafael Wysocki:
 "Fix two issues related to boost frequencies handling, one in the
  cpufreq core and one in the ACPI cpufreq driver (Mario Limonciello)"

* tag 'pm-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: ACPI: Mark boost policy as enabled when setting boost
  cpufreq: Allow drivers to advertise boost enabled

Pull thermal control fixes from Rafael Wysocki:
 "These fix a possible NULL pointer dereference in a thermal governor,
  fix up the handling of thermal zones enabled before their temperature
  can be determined and fix list sorting during thermal zone temperature
  updates.

  Specifics:

   - Prevent the Power Allocator thermal governor from dereferencing a
     NULL pointer if it is bound to a tripless thermal zone (Nícolas
     Prado)

   - Prevent thermal zones enabled too early from staying effectively
     dormant forever because their temperature cannot be determined
     initially (Rafael Wysocki)

   - Fix list sorting during thermal zone temperature updates to ensure
     the proper ordering of trip crossing notifications (Rafael
     Wysocki)"

* tag 'thermal-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Fix list sorting in __thermal_zone_device_update()
  thermal: core: Call monitor_thermal_zone() if zone temperature is invalid
  thermal: gov_power_allocator: Return early in manage if trip_max is NULL

Pull devicetree fix from Rob Herring:

 - One fix for PASemi Nemo board interrupts

* tag 'devicetree-fixes-for-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of/irq: Disable "interrupt-map" parsing for PASEMI Nemo

Pull smb server fixes from Steve French:

 - fix access flags to address fuse incompatibility

 - fix device type returned by get filesystem info

* tag '6.10-rc6-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: discard write access to the directory open
  ksmbd: return FILE_DEVICE_DISK instead of super magic

Merge tag 'linux_kselftest-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan
 "Fixes to clang build failures to timerns, vDSO tests and fixes to vDSO
  makefile"

* tag 'linux_kselftest-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/vDSO: remove duplicate compiler invocations from Makefile
  selftests/vDSO: remove partially duplicated "all:" target in Makefile
  selftests/vDSO: fix clang build errors and warnings
  selftest/timerns: fix clang build failures for abs() calls

crst_table_free() used to work with NULL pointers before the conversion
to ptdescs.  Since crst_table_free() can be called with a NULL pointer
(error handling in crst_table_upgrade() add an explicit check.

Also add the same check to base_crst_free() for consistency reasons.

In real life this should not happen, since order two GFP_KERNEL
allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used.
Reported-by: Yunseong Kim <yskelg@gmail.com>
Fixes: 6326c26c ("s390: convert various pgalloc functions to use ptdescs")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Once again, we've broken PASEMI Nemo boards with its incomplete
"interrupt-map" translations. Commit 935df1bd ("of/irq: Factor out
parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
changed the behavior resulting in the existing work-around not taking
effect. Rework the work-around to just skip parsing "interrupt-map" up
front by using the of_irq_imap_abusers list.

Fixes: 935df1bd ("of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/86ed8ba2sp.wl-maz@kernel.orgSigned-off-by: Rob Herring (Arm) <robh@kernel.org>

Merge tag 'perf-tools-fixes-for-v6.10-2024-07-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "Fix performance issue for v6.10

  These address the performance issues reported by Matt, Namhyung and
  Linus. Recently perf changed the processing of the comm string and DSO
  using sorted arrays but this caused it to sort the array whenever
  adding a new entry.

  This caused a performance issue and the fix is to enhance the sorting
  by finding the insertion point in the sorted array and to shift
  righthand side using memmove()"

* tag 'perf-tools-fixes-for-v6.10-2024-07-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf dsos: When adding a dso into sorted dsos maintain the sort order
  perf comm str: Avoid sort during insert

The order in which lists are sorted in __thermal_zone_device_update()
is reverse with respect to what it should be due to a mistake in
thermal_trip_notify_cmp().

Fix it and observe that it is not necessary to sort the lists in
different orders.  They can both be sorted in ascending order if
way_down_list is walked in reverse order which allows the code to
be slightly more straightforward (and less prone to silly mistakes).

Fixes: 7454f2c4 ("thermal: core: Sort trip point crossing notifications by temperature")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12481676.O9o76ZdvQC@rjwysocki.net

dsos__add would add at the end of the dso array possibly requiring a
later find to re-sort the array. Patterns of find then add were
becoming O(n*log n) due to the sorts. Change the add routine to be
O(n) rather than O(1) but to maintain the sorted-ness of the dsos
array so that later finds don't need the O(n*log n) sort.

Fixes: 3f4ac23a ("perf dsos: Switch backing storage to array from rbtree/list")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Steinar Gunderson <sesse@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Link: https://lore.kernel.org/r/20240703172117.810918-3-irogers@google.comSigned-off-by: Namhyung Kim <namhyung@kernel.org>

The array is sorted, so just move the elements and insert in order.

Fixes: 13ca6287 ("perf comm: Add reference count checking to 'struct comm_str'")
Reported-by: Matt Fleming <matt@readmodwrite.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Matt Fleming <matt@readmodwrite.com>
Cc: Steinar Gunderson <sesse@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240703172117.810918-2-irogers@google.comSigned-off-by: Namhyung Kim <namhyung@kernel.org>

Pull clk fixes from Stephen Boyd:
 "A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:

   - Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
     set the alpha enable bit and not set bits that don't exist

   - Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
     warnings

   - Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
     correct

   - Fix the min/max rate clamping logic in the Allwinner driver that
     got broken in v6.9

   - Limit runtime PM enabling in the Mediatek driver to only
     mt8183-mfgcfg so that system wide resume doesn't break on other
     Mediatek SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
  clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
  clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
  clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
  clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
  clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents

Pull powerpc fixes from Michael Ellerman:

 - Fix unnecessary copy to 0 when kernel is booted at address 0

 - Fix usercopy crash when dumping dtl via debugfs

 - Avoid possible crash when PCI hotplug races with error handling

 - Fix kexec crash caused by scv being disabled before other CPUs
   call-in

 - Fix powerpc selftests build with USERCFLAGS set

Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.

* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix build with USERCFLAGS set
  powerpc/pseries: Fix scv instruction crash with kexec
  powerpc/eeh: avoid possible crash when edev->pdev changes
  powerpc/pseries: Whitelist dtl slub object for copying to userspace
  powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0

Pull smb client fix from Steve French:
 "Fix for smb3 readahead performance regression"

* tag '6.10-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix read-performance regression by dropping readahead expansion

Pull i2c fix from Wolfram Sang:
 "An i2c driver fix"

* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr

Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:

  $ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
  ...
  gcc -Wno-error    cache_shape.c ...
  cache_shape.c:18:10: fatal error: utils.h: No such file or directory
     18 | #include "utils.h"
        |          ^~~~~~~~~
  compilation terminated.

This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.

Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.

Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.

With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:

  $ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
  ...
  gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"'
  -I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error
  cache_shape.c ...

Fixes: 5553a793 ("selftests/powerpc: Add flags.mk to support pmu buildable")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240706120833.909853-1-mpe@ellerman.id.au

Merge tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity fix from Mimi Zohar:
 "A single bug fix to properly remove all of the securityfs IMA
  measurement lists"

* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: fix wrong zero-assignment during securityfs dentry remove

The Makefile open-codes compiler invocations that ../lib.mk already
provides.

Avoid this by using a Make feature that allows setting per-target
variables, which in this case are: CFLAGS and LDFLAGS. This approach
generates the exact same compiler invocations as before, but removes all
of the code duplication, along with the quirky mangled variable names.
So now the Makefile is smaller, less unusual, and easier to read.

The new dependencies are listed after including lib.mk, in order to
let lib.mk provide the first target ("all:"), and are grouped together
with their respective source file dependencies, for visual clarity.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

There were a couple of errors here:

1. TEST_GEN_PROGS was incorrectly prepending $(OUTPUT) to each program
to be built. However, lib.mk already does that because it assumes "bare"
program names are passed in, so this ended up creating
$(OUTPUT)/$(OUTPUT)/file.c, which of course won't work as intended.

2. lib.mk was included before TEST_GEN_PROGS was set, which led to
lib.mk's "all:" target not seeing anything to rebuild.

So nothing worked, which caused the author to force things by creating
an "all:" target locally--while still including ../lib.mk.

Fix all of this by including ../lib.mk at the right place, and removing
the $(OUTPUT) prefix to the programs to be built, and removing the
duplicate "all:" target.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

When building with clang, via:

    make LLVM=1 -C tools/testing/selftests

...there are several warnings, and an error. This fixes all of those and
allows these tests to run and pass.

1. Fix linker error (undefined reference to memcpy) by providing a local
   version of memcpy.

2. clang complains about using this form:

    if (g = h & 0xf0000000)

...so factor out the assignment into a separate step.

3. The code is passing a signed const char* to elf_hash(), which expects
   a const unsigned char *. There are several callers, so fix this at
   the source by allowing the function to accept a signed argument, and
   then converting to unsigned operations, once inside the function.

4. clang doesn't have __attribute__((externally_visible)) and generates
   a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem
   to require that attribute in order to build, run and pass tests here,
   so remove it.
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Pull pci update from Bjorn Helgaas:

 - Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
   Synopsys DesignWare eDMA driver and reflect that he is no longer at
   Synopsys and isn't in a position to maintain the DesignWare xData
   traffic generator (Bjorn Helgaas)

* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
  MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for the CMODX example in the recently added icache flushing
   prctl()

 - A fix to the perf driver to avoid corrupting event data on counter
   overflows when external overflow handlers are in use

 - A fix to clear all hardware performance monitor events on boot, to
   avoid dangling events firmware or previously booted kernels from
   triggering spuriously

 - A fix to the perf event probing logic to avoid erroneously reporting
   the presence of unimplemented counters. This also prevents some
   implemented counters from being reported

 - A build fix for the vector sigreturn selftest on clang

 - A fix to ftrace, which now requires the previously optional index
   argument to ftrace_graph_ret_addr()

 - A fix to avoid deadlocking if kexec crash handling triggers in an
   interrupt context

* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: kexec: Avoid deadlock in kexec crash path
  riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
  riscv: selftests: Fix vsetivli args for clang
  perf: RISC-V: Check standard event availability
  drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
  drivers/perf: riscv: Do not update the event data if uptodate
  documentation: Fix riscv cmodx example

When building with clang, via:

    make LLVM=1 -C tools/testing/selftests

...clang warns about mismatches between the expected and required
integer length being supplied to abs(3).

Fix this by using the correct variant of abs(3): labs(3) or llabs(3), in
these cases.
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Pull drm fixes from Daniel Vetter:
 "Just small fixes all over here, all quiet as it should.

  drivers:

   - amd: mostly amdgpu display fixes + radeon vm NULL deref fix

   - xe: migration error handling + typoed register name in gt setup

   - i915: usb-c fix to shut up warnings on MTL+

   - panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
     wrongly

   - panel quirks

   - nouveau: NULL deref in get_modes

  drm core:

   - fbdev big endian fix for the dma memory backed variant

  drivers/firmware:

   - fix sysfb refcounting"

* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
  drm/xe/mcr: Avoid clobbering DSS steering
  drm/xe: fix error handling in xe_migrate_update_pgtables
  drm/ttm: Always take the bo delayed cleanup path for imported bos
  drm/fbdev-generic: Fix framebuffer on big endian devices
  drm/panthor: Fix sync-only jobs
  drm/panthor: Don't check the array stride on empty uobj arrays
  drm/amdgpu/atomfirmware: silence UBSAN warning
  drm/radeon: check bo_va->bo is non-NULL before using it
  drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
  drm/amd/display: Update efficiency bandwidth for dcn351
  drm/amd/display: Fix refresh rate range for some panel
  drm/amd/display: Account for cursor prefetch BW in DML1 mode support
  drm/amd/display: Add refresh rate range check
  drm/amd/display: Reset freesync config before update new state
  drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
  drm: panel-orientation-quirks: Add quirk for Valve Galileo
  drm/i915/display: For MTL+ platforms skip mg dp programming
  drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
  firmware: sysfb: Fix reference count of sysfb parent device

Pull gpio fixes from Bartosz Golaszewski:
 "Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
  driver:

   - add two OF lookup quirks for TSC2005 and MIPS Lantiq

   - don't try to figure out bgpio_bits from the 'ngpios' property in
     gpio-mmio"

* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: of: add polarity quirk for TSC2005
  gpio: mmio: do not calculate bgpio_bits via "ngpios"
  gpiolib: of: fix lookup quirk for MIPS Lantiq

Pull TPM fixes from Jarkko Sakkinen:
 "This contains the fixes for !chip->auth condition, preventing the
  breakage of:
   - tpm_ftpm_tee.c
   - tpm_i2c_nuvoton.c
   - tpm_ibmvtpm.c
   - tpm_tis_i2c_cr50.c
   - tpm_vtpm_proxy.c

  All drivers will continue to work as they did in 6.9, except a single
  warning (dev_warn() not WARN()) is printed to klog only to inform that
  authenticated sessions are not enabled"

* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
  tpm: Address !chip->auth in tpm_buf_append_name()
  tpm: Address !chip->auth in tpm2_*_auth_session()

Pull kvm fix from Paolo Bonzini:

 - s390: fix support for z16 systems

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix LPSWEY handling

may_open() does not allow a directory to be opened with the write access.
However, some writing flags set by client result in adding write access
on server, making ksmbd incompatible with FUSE file system. Simply, let's
discard the write access when opening a directory.

list_add corruption. next is NULL.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:26!
pc : __list_add_valid+0x88/0xbc
lr : __list_add_valid+0x88/0xbc
Call trace:
__list_add_valid+0x88/0xbc
fuse_finish_open+0x11c/0x170
fuse_open_common+0x284/0x5e8
fuse_dir_open+0x14/0x24
do_dentry_open+0x2a4/0x4e0
dentry_open+0x50/0x80
smb2_open+0xbe4/0x15a4
handle_ksmbd_work+0x478/0x5ec
process_one_work+0x1b4/0x448
worker_thread+0x25c/0x430
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20

Cc: stable@vger.kernel.org
Signed-off-by: Yoonho Shin <yoonho.shin@samsung.com>
Signed-off-by: Hobin Woo <hobin.woo@samsung.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'i2c-host-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

This tag includes a nice fix in the PNX driver that has been
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.

Merge tag 'amd-drm-fixes-6.10-2024-07-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.10-2024-07-03:

amdgpu:
- Freesync fixes
- DML1 bandwidth fix
- DCN 3.5 fixes
- DML2 fix
- Silence an UBSAN warning

radeon:
- GPUVM fix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703184723.1981997-1-alexander.deucher@amd.com

DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low".  In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493.

Fixes: d0d89493 ("Input: tsc2004/5 - switch to using generic device properties")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZoWXwYtwgJIxi-hD@google.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Merge tag 'kvm-s390-master-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fix z16 support

The z16 support might fail with the lpswey instruction. Provide a
handler.

Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*().  Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.

Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 1085b827 ("tpm: Add the rest of the session HMAC API")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name().  Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.

Cc: stable@vger.kernel.org # v6.10+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: d0a25bb9 ("tpm: Add HMAC session name/handle append")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause
a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in
tpm2_*_auth_session().

Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 699e3efd ("tpm: Add HMAC session start and end functions")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Pull btrfs fixes from David Sterba:

 - fix folio refcounting when releasing them (encoded write, dummy
   extent buffer)

 - fix out of bounds read when checking qgroup inherit data

 - fix how configurable chunk size is handled in zoned mode

 - in the ref-verify tool, fix uninitialized return value when checking
   extent owner ref and simple quota are not enabled

* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
  btrfs: fix folio refcount in btrfs_do_encoded_write()
  btrfs: fix uninitialized return value in the ref-verify tool
  btrfs: always do the basic checks for btrfs_qgroup_inherit structure
  btrfs: zoned: fix calc_available_free_space() for zoned mode

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, wireless and netfilter.

  There's one fix for power management with Intel's e1000e here,
  Thorsten tells us there's another problem that started in v6.9. We're
  trying to wrap that up but I don't think it's blocking.

  Current release - new code bugs:

   - wifi: mac80211: disable softirqs for queued frame handling

   - af_unix: fix uninit-value in __unix_walk_scc(), with the new
     garbage collection algo

  Previous releases - regressions:

   - Bluetooth:
      - qca: fix BT enable failure for QCA6390 after warm reboot
      - add quirk to ignore reserved PHY bits in LE Extended Adv Report,
        abused by some Broadcom controllers found on Apple machines

   - wifi: wilc1000: fix ies_len type in connect path

  Previous releases - always broken:

   - tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
     avoid premature timeouts

   - net: make sure skb_datagram_iter maps fragments page by page, in
     case we somehow get compound highmem mixed in

   - eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
     queues are used

  Misc:

   - MAINTAINERS: Remembering Larry Finger"

* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  bnxt_en: Fix the resource check condition for RSS contexts
  mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
  inet_diag: Initialize pad field in struct inet_diag_req_v2
  tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
  selftests: make order checking verbose in msg_zerocopy selftest
  selftests: fix OOM in msg_zerocopy selftest
  ice: use proper macro for testing bit
  ice: Reject pin requests with unsupported flags
  ice: Don't process extts if PTP is disabled
  ice: Fix improper extts handling
  selftest: af_unix: Add test case for backtrack after finalising SCC.
  af_unix: Fix uninit-value in __unix_walk_scc()
  bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
  net: rswitch: Avoid use-after-free in rswitch_poll()
  netfilter: nf_tables: unconditionally flush pending work before notifier
  wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
  wifi: iwlwifi: mvm: avoid link lookup in statistics
  wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
  wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
  wifi: wilc1000: fix ies_len type in connect path
  ...

Commit 202aa0d4 ("thermal: core: Do not call handle_thermal_trip()
if zone temperature is invalid") caused __thermal_zone_device_update()
to return early if the current thermal zone temperature was invalid.

This was done to avoid running handle_thermal_trip() and governor
callbacks in that case which led to confusion.  However, it went too
far because monitor_thermal_zone() still needs to be called even when
the zone temperature is invalid to ensure that it will be updated
eventually in case thermal polling is enabled and the driver has no
other means to notify the core of zone temperature changes (for example,
it does not register an interrupt handler or ACPI notifier).

Also if the .set_trips() zone callback is expected to set up monitoring
interrupts for a thermal zone, it has to be provided with valid
boundaries and that can only happen if the zone temperature is known.

Accordingly, to ensure that __thermal_zone_device_update() will
run again after a failing zone temperature check, make it call
monitor_thermal_zone() regardless of whether or not the zone
temperature is valid and make the latter schedule a thermal zone
temperature update if the zone temperature is invalid even if
polling is not enabled for the thermal zone.

Fixes: 202aa0d4 ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid")
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2764814.mvXUDI8C0e@rjwysocki.net
[ rjw: Changed THERMAL_RECHECK_DELAY_MS to 250 ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>