- 28 Jun, 2005 40 commits
-
-
Andrew Morton authored
Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
Merge head 'upstream-20050628-1' of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
-
Jeff Garzik authored
-
Tejun Heo authored
This patch removes unnecessary ata_port_start/stop() calls from ahci_port_start/stop(). Signed-off-by:Tejun Heo <htejun@gmail.com>
-
Tejun Heo authored
This patch lengthens the delay between DET setting and clearing for COMMRESET from 400us to 1ms. I couldn't find any requiremen regarding the duration of COMMRESET in SATA I/II specs but AHCI-1.1 10.4.2 states that it should be at least 1ms. Signed-off-by: -
Jeff Garzik authored
Contributions from Alan Cox and maximilian attems.
-
Andrew Morton authored
drivers/block/cfq-iosched.c: In function 'cfq_put_queue': drivers/block/cfq-iosched.c:303: sorry, unimplemented: inlining failed in call to 'cfq_pending_requests': function body not available drivers/block/cfq-iosched.c:1080: sorry, unimplemented: called from here drivers/block/cfq-iosched.c: In function '__cfq_may_queue': drivers/block/cfq-iosched.c:1955: warning: the address of 'cfq_cfqq_must_alloc_slice', will always evaluate as 'true' make[1]: *** [drivers/block/cfq-iosched.o] Error 1 make: *** [drivers/block/cfq-iosched.o] Error 2 Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Komuro authored
"Allied Telesis RE1000 Plus" is not supported at all by kernel 2.6.12. Signed-off-by: komurojun-mbn@nifty.com
-
Edward Falk authored
I fleshed out libata.tmpl a bit while I was taking notes.
-
-
Tobias Klauser authored
The amd8111e driver directly assigns the DMA mask to the dma_mask member of the struct pci_dev instead of using pci_set_dma_mask(). This makes the call to pci_dma_supported() redundant as pci_set_dma_mask() does this check. I do not own this device so I only compile-tested this patch. Signed-off-by:Tobias Klauser <tklauser@nuerscht.ch>
-
David Brownell authored
For boards that invert the SMC91x IRQ line (maybe an FPGA inverts it), the set_irq_type() call can't assume IRQT_RISING. These particular boards currently use OMAP-specific calls to change the trigger type, but the boards break when set_irq_type() stops being a NOP. Signed-off-by:David Brownell <dbrownell@users.sourceforge.net>
-
Jeff Garzik authored
-
Jeff Garzik authored
-
Dominik Brodowski authored
Don't auto-configure yenta sockets for PCMCIA devices if it is connected to the root PCI bus on the x86 or x86_64 architectures. Previously, this was handled by the "ioport_resource"/"iomem_resource" check a few lines below, but with the new ACPI-based resource handling this doesn't catch all cases any longer. pci-yenta-cardbus-fix.patch and this patch should solve the initialization time trouble. However, the ACPI-based PCI resource handling is badly broken, IMHO: - many resources of devices don't show up in the resource trees ( /proc/iomem and /proc/ioports) any longer. This means that PCMCIA, but also possibly other subsystems (ISA, PnP, ...) do not know which resources it cannot use. - verify_root_windows() should fail if there are no iomem _or_ ioport resources, not only if there are no iomem _and_ ioport resources. Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Dominik Brodowski authored
Provide a "modalias" entry in sysfs for PCMCIA devices. Signed-off-by:
-
Dominik Brodowski authored
The PCMCIA card services layer is never setting the i/o map attributes when SS_CAP_STATIC_MAP is specified. Net result, sockets' set_io_map() calls always see requests with most flags clear, meaning 8 bit access. For hardware that always autosizes, that won't matter; and all current STATIC_MAP drivers ignore those attributes. A new driver (for at91rm9200) suffers badly from this, since this forces everything into 8 bit mode and that breaks both (a) cards requiring 16 bit access, and (b) ide-cs; but of course 8-bit cards work OK (as does accessing card attributes). So this patch arranges to pass the attributes down, matching the behavior for non-static mappings (using the first/only I/O window). Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.de> Signed-off-by:
-
Dominik Brodowski authored
register_chrdev() can return errors (negative) other then -EBUSY, so check for any negative error code. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Jar authored
Fix example hash generator in Documentation. Signed-off-by:
-
Dominik Brodowski authored
- properly bail out in set_cis_map if call to socket driver's set_mem_map failed - don't abort do_mem_probe cycle if one entry failed (!CONFIG_PCMCIA_PROBE) - don't do iomem probing in chunks larger than 0x800000 (1 << 23) as yenta_socket and vrc4173_cardu.c fail to set_mem_map for windows equal to or larger than (1 << 24). Signed-off-by:
-
Dominik Brodowski authored
PCMCIA needs CRC32. Signed-off-by:
-
Dominik Brodowski authored
The size of pointers may differ between (userspace) modpost and (kernelspace) modules -- so fix mod_devicetable.h to reflect this possibility. Signed-off-by:
-
Dominik Brodowski authored
Remove the IRQ_INFO2_VALID flag in synclink_cs -- I overlooked it when removing all other users in PCMCIA drivers for 2.6.11. Thanks to Marcelo Tosatti for noticing it. Signed-off-by:
-
Dominik Brodowski authored
randy_dunlap <rdunlap@xenotime.net> Convert deprecated check_region() calls to request/release region. Add return value check on one request_region(). I suspect that it may do an extra release_region(), which should generate a warning message from the kernel. Signed-off-by: -
Dominik Brodowski authored
Properly wait for the class refcount to reach zero. Signed-off-by:
-
Dominik Brodowski authored
Clean up ds.c Signed-off-by:
-
Dominik Brodowski authored
Clean up cs.c Signed-off-by:
-
Dominik Brodowski authored
Move the 16-bit PCMICA resource handling from pcmcia_core.o to pcmcia.o. Signed-off-by:
-
Dominik Brodowski authored
Rename some functions in drivers/pcmcia/ to show they belong to the PCMCIA subsystem. Signed-off-by:
-
Dominik Brodowski authored
Remove unnecessary includes in ds.c and pcmcia_ioctl.c Signed-off-by:
-
Dominik Brodowski authored
Merge struct pcmcia_bus_socket into struct pcmcia_socket. Signed-off-by:
-
Dominik Brodowski authored
make pcmcia_bus_socket->state a bitfield, and rename it pcmcia_state to prepare for struct pcmcia_bus_socket integration into struct pcmcia_socket. Signed-off-by:
-
Dominik Brodowski authored
struct pcmcia_callback isn't needed for each socket, one is enough for all sockets. Signed-off-by:
-
Dominik Brodowski authored
Move all PCMCIA_IOCTL-related code to a different file. Signed-off-by:
-
Dominik Brodowski authored
Add a new config option to control the building of the PCMCIA IOCTL. Currently, it is not yet made public, though the help text is there already. Signed-off-by:
Dominik Brodowski <linux@dominikbrodowksi.net> Signed-off-by:
-
Dominik Brodowski authored
Automatically mark the parent PCI-PCI bridge windows as resources available for PCMCIA usage. Signed-off-by:
-
Dominik Brodowski authored
Make adjust_io and adjust_memory independent of adjust_t to allow for IO resources > x86's IO_SPACE_LIMIT. Signed-off-by:
-
Dominik Brodowski authored
Add some information useful for PCMCIA device driver authors to Documentation/pcmcia/, and reference it in dmesg in case of hash mismatches. Also add a reference to pcmciautils to Documentation/Changes. With recent changes, you don't need to concern yourself with pcmcia-cs even if you have PCMCIA hardware, so the example above the list needed to be adapted as well. Signed-off-by:
-
Jun Komuro authored
Add new pcmcia id_table for fmvj18x_cs and serial_cs. (TDK multi-function card (NetPartner9610 and MobileNetworker3200)) Signed-off-by:
Jun Komuro <komurojun-mbn@nifty.com> Signed-off-by:
-
David Brownell authored
Catch up with some PCMCIA API changes: - Docs say that as of 2.6.11 the PCMCIA IRQInfo2 field is ignored, but it's not yet removed from the API; stop using it anyway. - As of 2.6.13 PCMCIA finally hotplugs and does driver binding without "cardmgr"; add a MODULE_DEVICE_TABLE to support this. Signed-off-by:
-
