- 09 Jun, 2023 34 commits
-
-
Srinivasan Shanmugam authored
Log when Channel Equalization is successful. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Srinivasan Shanmugam authored
Fix the following checkpatch warnings & error in amdgpu_psp.c WARNING: Comparisons should place the constant on the right side of the test WARNING: braces {} are not necessary for single statement blocks WARNING: please, no space before tabs WARNING: braces {} are not necessary for single statement blocks ERROR: that open brace { should be on the previous line Suggested-by:Christian König <christian.koenig@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
No longer used. Remove it. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Alex Deucher authored
No longer used. Remove it. Reviewed-by:
-
Philip Yang authored
With XNACK on if svm_range_set_attr set the range access or access_in_place attribute, we don't call svm_range_validate_and_map to update GPU mapping. This avoids prefaulting the range pages on system memory if the range is not prefetch to VRAM and not mapped to GPUs. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Include eDP v1.4 panels supported sink rates in debug output, useful info for knowing optimized link rates Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Jerry Zuo <jerry.zuo@amd.com> Reviewed-by:
-
Harshit Mogalapalli authored
We have a NULL check for 'dc_dmub_srv' in dc_dmub_srv_cmd_run_list() but we are dereferencing it before checking. Fix this moving the dereference next to NULL check. This issue is found with Smatch(static analysis tool). Fixes: e97cc04f ("drm/amd/display: refactor dmub commands into single function") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fix the following issues reported by checkpatch: WARNING: please, no space before tabs WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: sizeof *rd should be sizeof(*rd) WARNING: Missing a blank line after declarations WARNING: sizeof rd->id should be sizeof(rd->id) WARNING: static const char * array should probably be static const char * const WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'. WARNING: Prefer seq_puts to seq_printf ERROR: space prohibited after that open parenthesis '(' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: -
YuBiao Wang authored
Enable mcbp under sriov by default. Asics with soc21 supports mcbp now so we should set it enabled. Signed-off-by:
YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by:
Horace Chen <horace.chen@amd.com> Signed-off-by:
-
Xiaomeng Hou authored
PASID_SRC is not actually present in the Interrupt Packet, the field is taken as reserved bits now. So remove it from IV entry to avoid misuse. Signed-off-by:
Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by:
Aaron Liu <aaron.liu@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fix the following checkpatch errors: ERROR: trailing statements should be on next line ERROR: space required after that ',' (ctx:VxV) ERROR: code indent should use tabs where possible Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Horace Chen authored
[Why] This WPTR_POLL_ENABLE is a hardware contigious polling which will cause FCLK and UCLK to keep on a high level. Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by firmware. So to save power, SR-IOV also needs to disable this bit Signed-off-by:
-
Stanley.Yang authored
Query sdma_utcl1_wr_fifo_sed fiel to detect UTCL1_WR_FIFO SED error counts Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
-
Chia-I Wu authored
mgr->ctx_handles should be protected by mgr->lock. v2: improve commit message v3: add a Fixes tag Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Reviewed-by:
-
Mukul Joshi authored
Use the helper function in TTM to get TTM memory limit and set KFD's internal mem limit. This ensures that KFD's TTM mem limit and actual TTM mem limit are exactly same. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
-
Mukul Joshi authored
Use the helper function in TTM to get TTM mem limit and set GTT size to be equal to TTL mem limit. Signed-off-by:
-
Mukul Joshi authored
Add a helper function to get TTM memory limit. This is needed by KFD to set its own internal memory limits. Signed-off-by:
-
Guchun Chen authored
This was left global by accident, the corresponding functions for other hardware types are already static: drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:1072:6: error: no previous prototype for function 'gfx_v9_4_3_disable_gpa_mode' [-Werror,-Wmissing-prototypes] Fixes: 86301129 ("drm/amdgpu: split gc v9_4_3 functionality from gc v9_0") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Guchun Chen authored
Instead of the default one, check the right mqd_backup object. Signed-off-by:
Le Ma <le.ma@amd.com> Signed-off-by:
-
Guchun Chen authored
This should be a typo when intruducing multi-xx support. Reported-by:
-
Tom Rix authored
gcc with W=1 reports drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c: In function ‘dc_dmub_srv_optimized_init_done’: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:184:26: error: variable ‘dmub’ set but not used [-Werror=unused-but-set-variable] 184 | struct dmub_srv *dmub; | ^~~~ The return status is never set. It looks like a call to dmub_srv_get_fw_boot_status is missing. Fixes: 499e4b1c ("drm/amd/display: add mechanism to skip DCN init") Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Tom Rix authored
smatch reports drivers/gpu/drm/amd/amdgpu/../display/modules/power/power_helpers.c:119:31: warning: symbol 'custom_backlight_curve0' was not declared. Should it be static? This variable is only used in its defining file, so it should be static Signed-off-by:
-
Horatio Zhang authored
The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v10_0_hw_fini, which also leads to the call trace. [ 82.340264] Call Trace: [ 82.340265] <TASK> [ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu] [ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu] [ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu] [ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu] [ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu] [ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 82.341529] process_one_work+0x21d/0x3f0 [ 82.341535] worker_thread+0x1fa/0x3c0 [ 82.341538] ? process_one_work+0x3f0/0x3f0 [ 82.341540] kthread+0xff/0x130 [ 82.341544] ? kthread_complete_and_exit+0x20/0x20 [ 82.341547] ret_from_fork+0x22/0x30 Signed-off-by:
Horatio Zhang <Hongkun.Zhang@amd.com> Reviewed-by:
-
Horatio Zhang authored
The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v11_0_hw_fini, which also leads to the call trace. [ 102.980303] Call Trace: [ 102.980303] <TASK> [ 102.980304] gmc_v11_0_hw_fini+0x54/0x90 [amdgpu] [ 102.980357] gmc_v11_0_suspend+0xe/0x20 [amdgpu] [ 102.980409] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu] [ 102.980459] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 102.980520] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu] [ 102.980573] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu] [ 102.980687] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 102.980740] process_one_work+0x21f/0x3f0 [ 102.980741] worker_thread+0x200/0x3e0 [ 102.980742] ? process_one_work+0x3f0/0x3f0 [ 102.980743] kthread+0xfd/0x130 [ 102.980743] ? kthread_complete_and_exit+0x20/0x20 [ 102.980744] ret_from_fork+0x22/0x30 Signed-off-by:
-
Shane Xiao authored
[Why] The selfring doorbell aperture will change when resize FB BAR successfully during gmc sw init, we should reorder the sequence of enabling doorbell selfring aperture. [How] Move enable_doorbell_selfring_aperture from *_common_hw_init to *_common_late_init. This fixes the potential issue that GPU ring its own doorbell when this device is in translated mode when iommu is on. v2: Remove *_enable_doorbell_aperture functions (Christian) v3: Add comments to note that why we need enable doorbell selfring late (Christian) Signed-off-by:Shane Xiao <shane.xiao@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fix following checkpatch errors in amdgpu_display.c ERROR: spaces required around that '=' (ctx:VxW) ERROR: that open brace { should be on the previous line ERROR: else should follow close brace '}' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: -
Srinivasan Shanmugam authored
if check over DSC passthrough is removed, as this is not for MST use case. It is for DP-HDMI pcon use case. sst pcon is detected as sst not mst. In sst pcon dsc passthrough message will not get below log printed Fixes: 9b035d08 ("drm/amd/display: Check & log if receiver supports MST, DSC & FEC.") Suggested-by:
Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
lyndonli authored
Below call trace and errors are observed when reloading amdgpu driver with the module parameter reset_method=3. It should do a default reset when loading or reloading the driver, regardless of the module parameter reset_method. v2: add comments inside and modify commit messages. [ +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed and response status is (0x0) [ +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc [ +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed! [ +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to clear memory with ring turned off. [ +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu] [ +0.000004] Call Trace: [ +0.000003] <TASK> [ +0.000008] ttm_bo_release+0x2c4/0x330 [amdttm] [ +0.000026] amdttm_bo_put+0x3c/0x70 [amdttm] [ +0.000020] amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu] [ +0.000728] psp_v11_0_ring_destroy+0x34/0x60 [amdgpu] [ +0.000826] psp_hw_init+0xe7/0x2f0 [amdgpu] [ +0.000813] amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu] [ +0.000731] amdgpu_device_init.cold+0x108e/0x2002 [amdgpu] [ +0.001071] ? do_pci_enable_device+0xe1/0x110 [ +0.000011] amdgpu_driver_load_kms+0x1a/0x160 [amdgpu] [ +0.000729] amdgpu_pci_probe+0x179/0x3a0 [amdgpu] Signed-off-by:
lyndonli <Lyndon.Li@amd.com> Signed-off-by:
Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
lyndonli authored
Before this change, sienna_cichlid_get_reset_handler will always return NULL, although the module parameter reset_method is 3 when loading amdgpu driver. Signed-off-by:
-
Pierre-Eric Pelloux-Prayer authored
OpenGL EXT_robustness extension expects the driver to stop reporting GUILTY_CONTEXT_RESET when the reset has completed and the GPU is ready to accept submission again. This commit adds a AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS flag, that let the UMD know that the reset is still not finished. Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290Reviewed-by:
André Almeida <andrealmeid@igalia.com> Signed-off-by:
Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by:
-
Christophe JAILLET authored
It is likely p1_min_meta_chunk_bytes was expected here, instead of min_meta_chunk_bytes. Test the correct variable. Fixes: dda4fb85 ("drm/amd/display: DML changes for DCN32/321") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
It is likely Height was expected here, instead of Width. Test the correct variable. Fixes: 17529ea2 ("drm/amd/display: Optimizations for DML math") Signed-off-by:
-
Sukrut Bellary authored
smatch warning - inconsistent handling of buffer object reserve and unreserve. Reviewed-by:
Sukrut Bellary <sukrut.bellary@linux.com> Signed-off-by:
-
Tom Rix authored
clang with W=1 reports drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:1003:15: error: variable 'dispclk_delay_subtotal' set but not used [-Werror,-Wunused-but-set-variable] unsigned int dispclk_delay_subtotal; ^ This variable is not used, so remove it. Which made dout unused, so also remove. Signed-off-by:
-
- 24 Apr, 2023 6 commits
-
-
Alex Deucher authored
This code was written prior to previous updates to this logic for other chips. The RSC registers are part of SMUIO which is an always on block so there is no need to disable gfxoff. Additionally add the carryover and preemption checks. v2: rebase Reviewed-by:
-
Likun Gao authored
Add support for PSP vbflash sysfs interface with MP0 version v13.0.10. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Aurabindo Pillai authored
This reverts commit 80c6d680. The orignal commit was intended as a workaround to prevent underflow and flickering when using one normal monitor and the other high refresh rate monitor (> 120Hz). This patch is being reverted in favour of a software solution to enable SubVP+DRR Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Aric Cyr authored
This DC version brings along: - Improvements in the SubVP feature - Keep disable aux-i delay as 0 - Add p-state debugging and improvements - Fix in secure display context creation - add option to use custom backlight caps - Lowering min Z8 residency time - Restore rptr/wptr for DMCUB as workaround - Update FW feature caps struct Acked-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
-
Michael Strauss authored
[WHY] Current Aux-I sequence checks for local_sink which isn't populated on MST links [HOW] Leave disable aux-i delay as 0 for MST cases Cc: stable@vger.kernel.org Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
George Shen <George.Shen@amd.com> Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Signed-off-by:
-
Alvin Lee authored
- We want to disable SubVP if Graphics Error Correction/Correcting Code (GECC) is enabled. - After reading feature caps from DMCUB during init, use the GECC enable/disable info to determine if SubVP can be enabled or not. Tested-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by:
-
