- 06 Jun, 2015 40 commits
-
-
Naidu Tellapati authored
commit 1e70897d upstream. The PWM hardware on Pistachio platform has a maximum timebase steps value to 255. To fix it, let's introduce a compatible-specific data structure to contain the SoC-specific details and use it to specify a maximum timebase. Also, let's limit the minimum timebase to 16 steps, to allow a sane range of duty cycle steps. Fixes: 277bb6a2 ("pwm: Imagination Technologies PWM DAC driver") Signed-off-by:
Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Cernekee authored
commit 98fb1ffd upstream. Block drivers are responsible for calling flush_dcache_page() on each BIO request. This operation keeps the I$ coherent with the D$ on architectures that don't have hardware coherency support. Without this flush, random crashes are seen when executing user programs from an ext4 filesystem backed by a ubiblock device. This patch is based on the change implemented in commit 2d4dc890 ("block: add helpers to run flush_dcache_page() against a bio and a request's pages"). Fixes: 9d54c8a3 ("UBI: R/O block driver on top of UBI volumes") Signed-off-by:
Kevin Cernekee <cernekee@chromium.org> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Vineet Gupta authored
commit daaf40e5 upstream. Fixes: f7d11e93 locking,arch,arc: Fold atomic_ops Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Wei Yongjun authored
commit 932df430 upstream. In case of error, the function devm_ioremap() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: ecfe64d8 ("power: reset: Add AT91 reset driver") Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Sasha Levin authored
commit 161f873b upstream. We used to read file_handle twice. Once to get the amount of extra bytes, and once to fetch the entire structure. This may be problematic since we do size verifications only after the first read, so if the number of extra bytes changes in userspace between the first and second calls, we'll have an incoherent view of file_handle. Instead, read the constant size once, and copy that over to the final structure without having to re-read it again. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Oded Gabbay authored
commit 42e08c78 upstream. This patch sets the local memory size that is reported to userspace to 0. This is done to make sure that userspace won't try to allocate local memory for HSA. As long as amdkfd doesn't support allocating local memory for HSA, we need this patch. Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Cc: stable@vger.kernel.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Junichi Nomura authored
commit 15b94a69 upstream. dm-multipath accepts 0 path mapping. # echo '0 2097152 multipath 0 0 0 0' | dmsetup create newdev Such a mapping can be used to release underlying devices while still holding requests in its queue until working paths come back. However, once the multipath device is created over blk-mq devices, it rejects reloading of 0 path mapping: # echo '0 2097152 multipath 0 0 1 1 queue-length 0 1 1 /dev/sda 1' \ | dmsetup create mpath1 # echo '0 2097152 multipath 0 0 0 0' | dmsetup load mpath1 device-mapper: reload ioctl on mpath1 failed: Invalid argument Command failed With following kernel message: device-mapper: ioctl: can't change device type after initial table load. DM tries to inherit the current table type using dm_table_set_type() but it doesn't work as expected because of unnecessary check about whether the target type is hybrid or not. Hybrid type is for targets that work as either request-based or bio-based and not required for blk-mq or non blk-mq checking. Fixes: 65803c20 ("dm table: train hybrid target type detection to select blk-mq if appropriate") Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 1c220c69 upstream. dm_merge_bvec() was originally added in f6fccb ("dm: introduce merge_bvec_fn"). In that commit a value in sectors is converted to bytes using << 9, and then assigned to an int. This code made assumptions about the value of BIO_MAX_SECTORS. A later commit 148e51 ("dm: improve documentation and code clarity in dm_merge_bvec") was meant to have no functional change but it removed the use of BIO_MAX_SECTORS in favor of using queue_max_sectors(). At this point the cast from sector_t to int resulted in a zero value. The fallout being dm_merge_bvec() would only allow a single page to be added to a bio. This interim fix is minimal for the benefit of stable@ because the more comprehensive cleanup of passing a sector_t to all DM targets' merge function will impact quite a few DM targets. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Christian König authored
commit 7c0411d2 upstream. We have that bug for years and some users report side effects when fixing it on older hardware. So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 2d1c18bb upstream. This breaks too many things. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=99041 https://bugs.freedesktop.org/show_bug.cgi?id=90681 This reverts commit 0f55db36. Signed-off-by:
-
Alex Deucher authored
commit fbfd3bc7 upstream. Avoids a crash when a monitor is hotplugged and the encoder and connector are not linked yet. bug: https://bugs.freedesktop.org/show_bug.cgi?id=90681Signed-off-by:
-
Alex Deucher authored
commit a10f0df0 upstream. Enabling audio may enable different pll dividers. Don't share plls if the monitors differ in audio support. bug: https://bugzilla.kernel.org/show_bug.cgi?id=98751Signed-off-by:
-
Daniel Vetter authored
commit 2e7f43c4 upstream. In commit f02ad907 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 22 16:36:23 2015 +0100 drm/atomic-helpers: Recover full cursor plane behaviour we've added a hack to atomic helpers to never to vblank waits for cursor updates through the legacy apis since that's what X expects. Unfortunately we've (again) forgotten to adjust the transitional helpers. Do this now. This fixes regressions for drivers only partially converted over to atomic (like i915). Reported-by:
Pekka Paalanen <ppaalanen@gmail.com> Cc: Pekka Paalanen <ppaalanen@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-and-tested-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Alex Deucher authored
commit 0f28d128 upstream. Retry the dpcd fetch several times. Some eDP panels fail several times before the fetch is successful. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73530Signed-off-by:
-
Christian König authored
commit 607d4806 upstream. The mapping range is inclusive between starting and ending addresses. Signed-off-by:
-
Alex Deucher authored
commit fcf3b542 upstream. Signed-off-by:
-
Liad Kaufman authored
commit 553452e5 upstream. In the case of a DMA mapping error on the last iteration of the loop of the allocation of memory of the FW monitor we indeed free the pages, but don't NULL out the page variable thus allowing for the possibility of setting the FW monitor variables with invalid data to use. Fixes: c2d20201 ("iwlwifi: pcie: add firmware monitor capabilities") Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Haim Dreyfuss authored
commit 2fc863a5 upstream. fw_status is the only pointer pointing to a block of memory allocated above and should be freed after use. Note: this come from Klockwork static analyzer. Fixes: 2021a89d ("iwlwifi: mvm: treat netdetect wake up separately") Signed-off-by:
Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by:
-
Luciano Coelho authored
commit a500e469 upstream. If the device is reset during suspend with net-detect enabled, we leave the net-detect information dangling and this causes the next suspend to fail with a warning: [21795.351010] WARNING: at /root/iwlwifi/iwlwifi-stack-dev/drivers/net/wireless/iwlwifi/mvm/d3.c:989 __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]() [21795.353253] Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) [...] [21795.366168] CPU: 1 PID: 3645 Comm: bash Tainted: G O 3.10.29-dev #1 [21795.368785] Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012 [21795.371441] f8ec6748 f8ec6748 e51f3ce8 c168aa62 e51f3d10 c103a824 c1871238 f8ec6748 [21795.374228] 000003dd f8eb982e f8eb982e 00000000 c3408ed4 c41edbbc e51f3d20 c103a862 [21795.377006] 00000009 00000000 e51f3da8 f8eb982e c41ee3dc 00000004 e7970000 e51f3d74 [21795.379792] Call Trace: [21795.382461] [<c168aa62>] dump_stack+0x16/0x18 [21795.385133] [<c103a824>] warn_slowpath_common+0x64/0x80 [21795.387803] [<f8eb982e>] ? __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm] [21795.390485] [<f8eb982e>] ? __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm] [21795.393124] [<c103a862>] warn_slowpath_null+0x22/0x30 [21795.395787] [<f8eb982e>] __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm] [21795.398464] [<f8eb9d7c>] iwl_mvm_suspend+0xec/0x140 [iwlmvm] [21795.401127] [<c104be11>] ? del_timer_sync+0xa1/0xc0 [21795.403800] [<f8d4107e>] __ieee80211_suspend+0x1de/0xff0 [mac80211] [21795.406459] [<c168e43d>] ? mutex_lock_nested+0x25d/0x350 [21795.409084] [<c1586b64>] ? rtnl_lock+0x14/0x20 [21795.411685] [<f8cf0076>] ieee80211_suspend+0x16/0x20 [mac80211] [21795.414318] [<f8c4e014>] wiphy_suspend+0x74/0x710 [cfg80211] [21795.416916] [<c141e612>] __device_suspend+0x1e2/0x220 [21795.419521] [<f8c4dfa0>] ? addresses_show+0xa0/0xa0 [cfg80211] [21795.422097] [<c141f997>] dpm_suspend+0x67/0x210 [21795.424661] [<c141fd6f>] dpm_suspend_start+0x4f/0x60 [21795.427219] [<c108d8e0>] suspend_devices_and_enter+0x60/0x480 [21795.429768] [<c168646a>] ? printk+0x4d/0x4f [21795.432295] [<c108de76>] pm_suspend+0x176/0x210 [21795.434830] [<c108ca5d>] state_store+0x5d/0xb0 [21795.437410] [<c108ca00>] ? wakeup_count_show+0x50/0x50 [21795.439961] [<c13208db>] kobj_attr_store+0x1b/0x30 [21795.442514] [<c11e3a4b>] sysfs_write_file+0xab/0x100 [21795.445088] [<c11e39a0>] ? sysfs_poll+0xa0/0xa0 [21795.447659] [<c1179655>] vfs_write+0xa5/0x1c0 [21795.450212] [<c1179af7>] SyS_write+0x57/0xa0 [21795.452699] [<c1699ec1>] sysenter_do_call+0x12/0x32 [21795.455146] ---[ end trace faf5321baba2bfdb ]--- To fix this, call the iwl_mvm_free_nd() function in case of any error during resume. Additionally, rename the "out_unlock" label to err to make it clearer that it's only called in error conditions. Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit b9a5e5e1 upstream. Since acpi_reserve_resources() is defined as a device_initcall(), there's no guarantee that it will be executed in the right order with respect to the rest of the ACPI initialization code. On some systems this leads to breakage if, for example, the address range that should be reserved for the ACPI fixed registers is given to the PCI host bridge instead if the race is won by the wrong code path. Fix this by turning acpi_reserve_resources() into a void function and calling it directly from within the ACPI initialization sequence. Reported-and-tested-by:
George McCollister <george.mccollister@gmail.com> Link: http://marc.info/?t=143092384600002&r=1&w=2Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mark Hounschell authored
commit 74856fbf upstream. 256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by:
Mark Hounschell <dmarkh@cfl.rr.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit dc45708c upstream. Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Benjamin Tissoires authored
commit 3c0213d1 upstream. When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Larry Finger authored
commit 414b7e3b upstream. The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by:
Bernhard Wiedemann <bwiedemann@suse.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Bernhard Wiedemann <bwiedemann@suse.com> Cc: Takashi Iwai<tiwai@suse.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Paul Burton authored
commit 620b1550 upstream. Commit 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") reworked the ELF FP ABI mode selection logic, but when CONFIG_MIPS_O32_FP64_SUPPORT is enabled it breaks the use of binaries which have no PT_MIPS_ABIFLAGS program header & associated .MIPS.abiflags section. A default mode is selected based upon whether the ELF contains MIPS32 or MIPS64 code, but that selection is made in arch_elf_pt_proc. arch_elf_pt_proc only executes when a PT_MIPS_ABIFLAGS program header is found. If one is not found then arch_elf_pt_proc is never called, and no default overall_fp_mode value is selected. When arch_check_elf is called, both abi0 & abi1 are MIPS_ABI_FP_UNKNOWN which leads to both prog_req & interp_req being set to none_req. none_req matches none of the conditions for mode selection at the end of arch_check_elf, so overall_fp_mode is left untouched. Finally once mips_set_personality_fp is called the BUG() in the default case is then hit & the kernel likely panics. Fix this by moving the selection of a default overall mode to the start of arch_check_elf, which runs once per ELF executed regardless of whether it has a PT_MIPS_ABIFLAGS program header. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/9978/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Benjamin Tissoires authored
commit 5006c105 upstream. This reverts commit 3a61e975. The Logitech TK820 seems to be affected by a firmware bug which delays the sending of the keys (pressed, or released, which triggers a key-repeat) while holding fingers on the touch sensor. This behavior can be observed while using the mouse emulation mode if the user moves the finger while typing (highly improbable though). Holding the finger still while in the mouse emulation mode does not trigger the key repeat problem. So better keep things in their previous state to not have to explain users that the new key-repeat bug they see is a "feature". Furthermore, I noticed that I disabled the media keys whith this patch. Sorry, my bad. I think it is best to revert the patch, in all the current versions it has been shipped. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Eric Work authored
commit a8115776 upstream. The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979 restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by:
NeilBrown <neilb@suse.de> Fixes: 47d68979 ("md/raid0: fix bug with chunksize not a power of 2.") URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501Signed-off-by:
-
NeilBrown authored
commit 6e9eac2d upstream. If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3 ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Signed-off-by:
-
Nadav Haklai authored
commit efa86858 upstream. Improve the Armada 380 thermal sensor accuracy by using updated formula. The updated formula is: Temperature[C degrees] = 0.4761 * tsen_vsen_out - 279.1 Signed-off-by:
Nadav Haklai <nadavh@marvell.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Jean Delvare authored
commit 5c1ac56b upstream. In function dmi_present(), dmi_walk_early() calls dmi_table(), which calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last function makes a decision based on the value of global variable dmi_ver. The problem is that this variable is set right _after_ dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0 regardless of the actual version implemented. This causes /sys/class/dmi/id/product_uuid to always use the old ordering even on systems implementing DMI/SMBIOS 2.6 or later, which should use the new ordering. This is broken since kernel v3.8 for legacy DMI implementations and since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3 implementations with the 64-bit entry point are not affected. The first breakage does not matter much as in practice legacy DMI implementations are always for versions older than 2.6, which is when the UUID ordering changed. The second breakage is more problematic as it affects the vast majority of x86 systems manufactured since 2009. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Acked-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Artem Savkov <artem.savkov@gmail.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Scott Mayhew authored
commit 9507271d upstream. In an environment where the KDC is running Active Directory, the exported composite name field returned in the context could be large enough to span a page boundary. Attaching a scratch buffer to the decoding xdr_stream helps deal with those cases. The case where we saw this was actually due to behavior that's been fixed in newer gss-proxy versions, but we're fixing it here too. Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Reviewed-by:
Simo Sorce <simo@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
commit ebe9cb3b upstream. If we find a non-confirmed openowner we jump to exit the function, but do not set an error value. Fix this by factoring out a helper to do the check and properly set the error from nfsd4_validate_stateid. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
commit 40cdc7a5 upstream. Commit df52699e ("NFSv4.1: Don't cache deviceids that have no notifications") causes the Linux NFS client to stop caching deviceid's unless a server pretends to support deviceid notifications. While this behavior is stupid and the language around this area in rfc5661 is a mess carified by an errata that I submittted, Trond insists on this behavior. Not caching deviceids degrades block layout performance massively as a GETDEVICEINFO is fairly expensive. So add this hack to make the Linux client happy again. Signed-off-by:
-
Mel Gorman authored
commit b0dc2b9b upstream. NUMA balancing is meant to be disabled by default on UMA machines but the check is using nr_node_ids (highest node) instead of num_online_nodes (online nodes). The consequences are that a UMA machine with a node ID of 1 or higher will enable NUMA balancing. This will incur useless overhead due to minor faults with the impact depending on the workload. These are the impact on the stats when running a kernel build on a single node machine whose node ID happened to be 1: vanilla patched NUMA base PTE updates 5113158 0 NUMA huge PMD updates 643 0 NUMA page range updates 5442374 0 NUMA hint faults 2109622 0 NUMA hint local faults 2109622 0 NUMA hint local percent 100 100 NUMA pages migrated 0 0 Signed-off-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andi Kleen authored
commit 4933f55f upstream. libabikfs.a doesn't exist anymore, so we now need to link with libapi.a. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Vladimir Davydov authored
commit 499611ed upstream. root->ino_ida is used for kernfs inode number allocations. Since IDA has a layered structure, different IDs can reside on the same layer, which is currently accounted to some memory cgroup. The problem is that each kmem cache of a memory cgroup has its own directory on sysfs (under /sys/fs/kernel/<cache-name>/cgroup). If the inode number of such a directory or any file in it gets allocated from a layer accounted to the cgroup which the cache is created for, the cgroup will get pinned for good, because one has to free all kmem allocations accounted to a cgroup in order to release it and destroy all its kmem caches. That said we must not account layers of ino_ida to any memory cgroup. Since per net init operations may create new sysfs entries directly (e.g. lo device) or indirectly (nf_conntrack creates a new kmem cache per each namespace, which, in turn, creates new sysfs entries), an easy way to reproduce this issue is by creating network namespace(s) from inside a kmem-active memory cgroup. Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Greg Thelen <gthelen@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Vladimir Davydov authored
commit 8f4fc071 upstream. Not all kmem allocations should be accounted to memcg. The following patch gives an example when accounting of a certain type of allocations to memcg can effectively result in a memory leak. This patch adds the __GFP_NOACCOUNT flag which if passed to kmalloc and friends will force the allocation to go through the root cgroup. It will be used by the next patch. Note, since in case of kmemleak enabled each kmalloc implies yet another allocation from the kmemleak_object cache, we add __GFP_NOACCOUNT to gfp_kmemleak_mask. Alternatively, we could introduce a per kmem cache flag disabling accounting for all allocations of a particular kind, but (a) we would not be able to bypass accounting for kmalloc then and (b) a kmem cache with this flag set could not be merged with a kmem cache without this flag, which would increase the number of global caches and therefore fragmentation even if the memory cgroup controller is not used. Despite its generic name, currently __GFP_NOACCOUNT disables accounting only for kmem allocations while user page allocations are always charged. To catch abusing of this flag, a warning is issued on an attempt of passing it to mem_cgroup_try_charge. Signed-off-by:
-
Helge Deller authored
commit d045c77c upstream. On architectures where the stack grows upwards (CONFIG_STACK_GROWSUP=y, currently parisc and metag only) stack randomization sometimes leads to crashes when the stack ulimit is set to lower values than STACK_RND_MASK (which is 8 MB by default if not defined in arch-specific headers). The problem is, that when the stack vm_area_struct is set up in fs/exec.c, the additional space needed for the stack randomization (as defined by the value of STACK_RND_MASK) was not taken into account yet and as such, when the stack randomization code added a random offset to the stack start, the stack effectively got smaller than what the user defined via rlimit_max(RLIMIT_STACK) which then sometimes leads to out-of-stack situations and crashes. This patch fixes it by adding the maximum possible amount of memory (based on STACK_RND_MASK) which theoretically could be added by the stack randomization code to the initial stack size. That way, the user-defined stack size is always guaranteed to be at minimum what is defined via rlimit_max(RLIMIT_STACK). This bug is currently not visible on the metag architecture, because on metag STACK_RND_MASK is defined to 0 which effectively disables stack randomization. The changes to fs/exec.c are inside an "#ifdef CONFIG_STACK_GROWSUP" section, so it does not affect other platformws beside those where the stack grows upwards (parisc and metag). Signed-off-by:
Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Signed-off-by:
-
Russell King authored
commit 1b979372 upstream. Josh Stone reports: I've discovered a case where both arm and arm64 will miss a ptrace syscall-exit that they should report. If the syscall is entered without TIF_SYSCALL_TRACE set, then it goes on the fast path. It's then possible to have TIF_SYSCALL_TRACE added in the middle of the syscall, but ret_fast_syscall doesn't check this flag again. Fix this by always checking for a syscall trace in the fast exit path. Reported-by:
Josh Stone <jistone@redhat.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Inki Dae authored
commit 242ddf04 upstream. This patch sets display clock correctly. If Display clock isn't set correctly then you would find below messages and Display controller doesn't work correctly. exynos-drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Fixes: abc0b144 ("drm: Perform basic sanity checks on probed modes") Signed-off-by:
Inki Dae <inki.dae@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Kukjin Kim <kgene@kernel.org> Signed-off-by:
-
