- 30 Jul, 2015 40 commits
-
-
Brian King authored
commit 45c44b5f upstream. Increase the default init stage change timeout from 15 seconds to 30 seconds. This resolves issues we have seen with some adapters not transitioning to the first init stage within 15 seconds, which results in adapter initialization failures. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Paul E. McKenney authored
commit 6e91f8cb upstream. If, at the time __rcu_process_callbacks() is invoked, there are callbacks in Tiny RCU's callback list, but none of them are ready to be invoked, the current list-management code will knit the non-ready callbacks out of the list. This can result in hangs and possibly worse. This commit therefore inserts a check for there being no callbacks that can be invoked immediately. This bug is unlikely to occur -- you have to get a new callback between the time rcu_sched_qs() or rcu_bh_qs() was called, but before we get to __rcu_process_callbacks(). It was detected by the addition of RCU-bh testing to rcutorture, which in turn was instigated by Iftekhar Ahmed's mutation testing. Although this bug was made much more likely by 915e8a4f (rcu: Remove fastpath from __rcu_process_callbacks()), this did not cause the bug, but rather made it much more probable. That said, it takes more than 40 hours of rcutorture testing, on average, for this bug to appear, so this fix cannot be considered an emergency. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Bjorn Helgaas authored
commit 3d9fecf6 upstream. We enable _CRS on all systems from 2008 and later. On older systems, we ignore _CRS and assume the whole physical address space (excluding RAM and other devices) is available for PCI devices, but on systems that support physical address spaces larger than 4GB, it's doubtful that the area above 4GB is really available for PCI. After d56dbf5b ("PCI: Allocate 64-bit BARs above 4G when possible"), we try to use that space above 4GB *first*, so we're more likely to put a device there. On Juan's Toshiba Satellite Pro U200, BIOS left the graphics, sound, 1394, and card reader devices unassigned (but only after Windows had been booted). Only the sound device had a 64-bit BAR, so it was the only device placed above 4GB, and hence the only device that didn't work. Keep _CRS enabled even on pre-2008 systems if they support physical address space larger than 4GB. Fixes: d56dbf5b ("PCI: Allocate 64-bit BARs above 4G when possible") Reported-and-tested-by:
Juan Dayer <jdayer@outlook.com> Reported-and-tested-by:
Alan Horsfield <alan@hazelgarth.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=99221 Link: https://bugzilla.opensuse.org/show_bug.cgi?id=907092Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Jiri Slaby <jslaby@suse.com>
-
Eric W. Biederman authored
commit ceeb0e5d upstream. Limit the mounts fs_fully_visible considers to locked mounts. Unlocked can always be unmounted so considering them adds hassle but no security benefit. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit 93e3bce6 upstream. The warning message in prepend_path is unclear and outdated. It was added as a warning that the mechanism for generating names of pseudo files had been removed from prepend_path and d_dname should be used instead. Unfortunately the warning reads like a general warning, making it unclear what to do with it. Remove the warning. The transition it was added to warn about is long over, and I added code several years ago which in rare cases causes the warning to fire on legitimate code, and the warning is now firing and scaring people for no good reason. Reported-by:
Ivan Delalande <colona@arista.com> Reported-by:
Omar Sandoval <osandov@osandov.com> Fixes: f48cfddc ("vfs: In d_path don't call d_dname on a mount point") Signed-off-by:
-
Jan Kara authored
commit 2426f391 upstream. file_remove_suid() could mistakenly set S_NOSEC inode bit when root was modifying the file. As a result following writes to the file by ordinary user would avoid clearing suid or sgid bits. Fix the bug by checking actual mode bits before setting S_NOSEC. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Radim Krčmář authored
commit 42720138 upstream. Writes were a bit racy, but hard to turn into a bug at the same time. (Particularly because modern Linux doesn't use this feature anymore.) Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> [Actually the next patch makes it much, much easier to trigger the race so I'm including this one for stable@ as well. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
James Hogan authored
commit 8e748c8d upstream. KVM guest kernels for trap & emulate run in user mode, with a modified set of kernel memory segments. However the fixmap address is still in the normal KSeg3 region at 0xfffe0000 regardless, causing problems when cache alias handling makes use of them when handling copy on write. Therefore define FIXADDR_TOP as 0x7ffe0000 in the guest kernel mapped region when CONFIG_KVM_GUEST is defined. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9887/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Bjorn Helgaas authored
commit 1dace011 upstream. The Foxconn K8M890-8237A has two PCI host bridges, and we can't assign resources correctly without the information from _CRS that tells us which address ranges are claimed by which bridge. In the bugs mentioned below, we incorrectly assign a sound card address (this example is from 1033299): bus: 00 index 2 [mem 0x80000000-0xfcffffffff] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xbfefffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) pci_root PNP0A08:01: host bridge window [mem 0xbff00000-0xbfffffff] (ignored) pci 0000:80:01.0: [1106:3288] type 0 class 0x000403 pci 0000:80:01.0: reg 10: [mem 0xbfffc000-0xbfffffff 64bit] pci 0000:80:01.0: address space collision: [mem 0xbfffc000-0xbfffffff 64bit] conflicts with PCI Bus #00 [mem 0x80000000-0xfcffffffff] pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit] BUG: unable to handle kernel paging request at ffffc90000378000 IP: [<ffffffffa0345f63>] azx_create+0x37c/0x822 [snd_hda_intel] We assigned 0xfd_0000_0000, but that is not in any of the host bridge windows, and the sound card doesn't work. Turn on pci=use_crs automatically for this system. Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299Signed-off-by:
-
Anton Blanchard authored
commit 72e349f1 upstream. When we take a PMU exception or a software event we call perf_read_regs(). This overloads regs->result with a boolean that describes if we should use the sampled instruction address register (SIAR) or the regs. If the exception is in kernel, we start with the kernel regs and backtrace through the kernel stack. At this point we switch to the userspace regs and backtrace the user stack with perf_callchain_user(). Unfortunately these regs have not got the perf_read_regs() treatment, so regs->result could be anything. If it is non zero, perf_instruction_pointer() decides to use the SIAR, and we get issues like this: 0.11% qemu-system-ppc [kernel.kallsyms] [k] _raw_spin_lock_irqsave | ---_raw_spin_lock_irqsave | |--52.35%-- 0 | | | |--46.39%-- __hrtimer_start_range_ns | | kvmppc_run_core | | kvmppc_vcpu_run_hv | | kvmppc_vcpu_run | | kvm_arch_vcpu_ioctl_run | | kvm_vcpu_ioctl | | do_vfs_ioctl | | sys_ioctl | | system_call | | | | | |--67.08%-- _raw_spin_lock_irqsave <--- hi mum | | | | | | | --100.00%-- 0x7e714 | | | 0x7e714 Notice the bogus _raw_spin_irqsave when we transition from kernel (system_call) to userspace (0x7e714). We inserted what was in the SIAR. Add a check in regs_use_siar() to check that the regs in question are from a PMU exception. With this fix the backtrace makes sense: 0.47% qemu-system-ppc [kernel.vmlinux] [k] _raw_spin_lock_irqsave | ---_raw_spin_lock_irqsave | |--53.83%-- 0 | | | |--44.73%-- hrtimer_try_to_cancel | | kvmppc_start_thread | | kvmppc_run_core | | kvmppc_vcpu_run_hv | | kvmppc_vcpu_run | | kvm_arch_vcpu_ioctl_run | | kvm_vcpu_ioctl | | do_vfs_ioctl | | sys_ioctl | | system_call | | __ioctl | | 0x7e714 | | 0x7e714 Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Marc Zyngier authored
commit 85e84ba3 upstream. On VM entry, we disable access to the VFP registers in order to perform a lazy save/restore of these registers. On VM exit, we restore access, test if we did enable them before, and save/restore the guest/host registers if necessary. In this sequence, the FPEXC register is always accessed, irrespective of the trapping configuration. If the guest didn't touch the VFP registers, then the HCPTR access has now enabled such access, but we're missing a barrier to ensure architectural execution of the new HCPTR configuration. If the HCPTR access has been delayed/reordered, the subsequent access to FPEXC will cause a trap, which we aren't prepared to handle at all. The same condition exists when trapping to enable VFP for the guest. The fix is to introduce a barrier after enabling VFP access. In the vmexit case, it can be relaxed to only takes place if the guest hasn't accessed its view of the VFP registers, making the access to FPEXC safe. The set_hcptr macro is modified to deal with both vmenter/vmexit and vmtrap operations, and now takes an optional label that is branched to when the guest hasn't touched the VFP registers. Reported-by:
Vikram Sethi <vikrams@codeaurora.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Joerg Roedel authored
commit 0b3fff54 upstream. Make sure that we are skipping over large PTEs while walking the page-table tree. Fixes: 5c34c403 ("iommu/amd: Fix memory leak in free_pagetable") Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Horia Geant? authored
commit 69d9cd8c upstream. This reverts commit 7291a932. The conversion to be16_add_cpu() is incorrect in case cryptlen is negative due to premature (i.e. before addition / subtraction) implicit conversion of cryptlen (int -> u16) leading to sign loss. Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Horia Geanta <horia.geanta@freescale.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Horia Geant? authored
commit 5fa7dadc upstream. Fixes: 1d11911a ("crypto: talitos - fix warning: 'alg' may be used uninitialized in this function") Signed-off-by:
-
Alexander Sverdlin authored
[ Upstream commit 29c4afc4 ] There is NULL pointer dereference possible during statistics update if the route used for OOTB responce is removed at unfortunate time. If the route exists when we receive OOTB packet and we finally jump into sctp_packet_transmit() to send ABORT, but in the meantime route is removed under our feet, we take "no_route" path and try to update stats with IP_INC_STATS(sock_net(asoc->base.sk), ...). But sctp_ootb_pkt_new() used to prepare responce packet doesn't call sctp_transport_set_owner() and therefore there is no asoc associated with this packet. Probably temporary asoc just for OOTB responces is overkill, so just introduce a check like in all other places in sctp_packet_transmit(), where "asoc" is dereferenced. To reproduce this, one needs to 0. ensure that sctp module is loaded (otherwise ABORT is not generated) 1. remove default route on the machine 2. while true; do ip route del [interface-specific route] ip route add [interface-specific route] done 3. send enough OOTB packets (i.e. HB REQs) from another host to trigger ABORT responce On x86_64 the crash looks like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ... CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.0.5-1-ARCH #1 Hardware name: ... task: ffffffff818124c0 ti: ffffffff81800000 task.ti: ffffffff81800000 RIP: 0010:[<ffffffffa05ec9ac>] [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] RSP: 0018:ffff880127c037b8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000015ff66b480 RDX: 00000015ff66b400 RSI: ffff880127c17200 RDI: ffff880123403700 RBP: ffff880127c03888 R08: 0000000000017200 R09: ffffffff814625af R10: ffffea00047e4680 R11: 00000000ffffff80 R12: ffff8800b0d38a28 R13: ffff8800b0d38a28 R14: ffff8800b3e88000 R15: ffffffffa05f24e0 FS: 0000000000000000(0000) GS:ffff880127c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 00000000c855b000 CR4: 00000000000007f0 Stack: ffff880127c03910 ffff8800b0d38a28 ffffffff8189d240 ffff88011f91b400 ffff880127c03828 ffffffffa05c94c5 0000000000000000 ffff8800baa1c520 0000000000000000 0000000000000001 0000000000000000 0000000000000000 Call Trace: <IRQ> [<ffffffffa05c94c5>] ? sctp_sf_tabort_8_4_8.isra.20+0x85/0x140 [sctp] [<ffffffffa05d6b42>] ? sctp_transport_put+0x52/0x80 [sctp] [<ffffffffa05d0bfc>] sctp_do_sm+0xb8c/0x19a0 [sctp] [<ffffffff810b0e00>] ? trigger_load_balance+0x90/0x210 [<ffffffff810e0329>] ? update_process_times+0x59/0x60 [<ffffffff812c7a40>] ? timerqueue_add+0x60/0xb0 [<ffffffff810e0549>] ? enqueue_hrtimer+0x29/0xa0 [<ffffffff8101f599>] ? read_tsc+0x9/0x10 [<ffffffff8116d4b5>] ? put_page+0x55/0x60 [<ffffffff810ee1ad>] ? clockevents_program_event+0x6d/0x100 [<ffffffff81462b68>] ? skb_free_head+0x58/0x80 [<ffffffffa029a10b>] ? chksum_update+0x1b/0x27 [crc32c_generic] [<ffffffff81283f3e>] ? crypto_shash_update+0xce/0xf0 [<ffffffffa05d3993>] sctp_endpoint_bh_rcv+0x113/0x280 [sctp] [<ffffffffa05dd4e6>] sctp_inq_push+0x46/0x60 [sctp] [<ffffffffa05ed7a0>] sctp_rcv+0x880/0x910 [sctp] [<ffffffffa05ecb50>] ? sctp_packet_transmit_chunk+0xb0/0xb0 [sctp] [<ffffffffa05ecb70>] ? sctp_csum_update+0x20/0x20 [sctp] [<ffffffff814b05a5>] ? ip_route_input_noref+0x235/0xd30 [<ffffffff81051d6b>] ? ack_ioapic_level+0x7b/0x150 [<ffffffff814b27be>] ip_local_deliver_finish+0xae/0x210 [<ffffffff814b2e15>] ip_local_deliver+0x35/0x90 [<ffffffff814b2a15>] ip_rcv_finish+0xf5/0x370 [<ffffffff814b3128>] ip_rcv+0x2b8/0x3a0 [<ffffffff81474193>] __netif_receive_skb_core+0x763/0xa50 [<ffffffff81476c28>] __netif_receive_skb+0x18/0x60 [<ffffffff81476cb0>] netif_receive_skb_internal+0x40/0xd0 [<ffffffff814776c8>] napi_gro_receive+0xe8/0x120 [<ffffffffa03946aa>] rtl8169_poll+0x2da/0x660 [r8169] [<ffffffff8147896a>] net_rx_action+0x21a/0x360 [<ffffffff81078dc1>] __do_softirq+0xe1/0x2d0 [<ffffffff8107912d>] irq_exit+0xad/0xb0 [<ffffffff8157d158>] do_IRQ+0x58/0xf0 [<ffffffff8157b06d>] common_interrupt+0x6d/0x6d <EOI> [<ffffffff810e1218>] ? hrtimer_start+0x18/0x20 [<ffffffffa05d65f9>] ? sctp_transport_destroy_rcu+0x29/0x30 [sctp] [<ffffffff81020c50>] ? mwait_idle+0x60/0xa0 [<ffffffff810216ef>] arch_cpu_idle+0xf/0x20 [<ffffffff810b731c>] cpu_startup_entry+0x3ec/0x480 [<ffffffff8156b365>] rest_init+0x85/0x90 [<ffffffff818eb035>] start_kernel+0x48b/0x4ac [<ffffffff818ea120>] ? early_idt_handlers+0x120/0x120 [<ffffffff818ea339>] x86_64_start_reservations+0x2a/0x2c [<ffffffff818ea49c>] x86_64_start_kernel+0x161/0x184 Code: 90 48 8b 80 b8 00 00 00 48 89 85 70 ff ff ff 48 83 bd 70 ff ff ff 00 0f 85 cd fa ff ff 48 89 df 31 db e8 18 63 e7 e0 48 8b 45 80 <48> 8b 40 20 48 8b 40 30 48 8b 80 68 01 00 00 65 48 ff 40 78 e9 RIP [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] RSP <ffff880127c037b8> CR2: 0000000000000020 ---[ end trace 5aec7fd2dc983574 ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) drm_kms_helper: panic occurred, switching back to text console ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 2c51a97f ] The lockless lookups can return entry that is unlinked. Sometimes they get reference before last neigh_cleanup_and_release, sometimes they do not need reference. Later, any modification attempts may result in the following problems: 1. entry is not destroyed immediately because neigh_update can start the timer for dead entry, eg. on change to NUD_REACHABLE state. As result, entry lives for some time but is invisible and out of control. 2. __neigh_event_send can run in parallel with neigh_destroy while refcnt=0 but if timer is started and expired refcnt can reach 0 for second time leading to second neigh_destroy and possible crash. Thanks to Eric Dumazet and Ying Xue for their work and analyze on the __neigh_event_send change. Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour") Fixes: a263b309 ("ipv4: Make neigh lookups directly in output packet path.") Fixes: 6fd6ce20 ("ipv6: Do not depend on rt->n in ip6_finish_output2().") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 468479e6 ] PACKET_FANOUT_LB computes f->rr_cur such that it is modulo f->num_members. It returns the old value unconditionally, but f->num_members may have changed since the last store. Ensure that the return value is always < num. When modifying the logic, simplify it further by replacing the loop with an unconditional atomic increment. Fixes: dc99f600 ("packet: Add fanout support.") Suggested-by:
Willem de Bruijn <willemb@google.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit f98f4514 ] We need to tell compiler it must not read f->num_members multiple times. Otherwise testing if num is not zero is flaky, and we could attempt an invalid divide by 0 in fanout_demux_cpu() Note bug was present in packet_rcv_fanout_hash() and packet_rcv_fanout_lb() but final 3.1 had a simple location after commit 95ec3eb4 ("packet: Add 'cpu' fanout policy.") Fixes: dc99f600 ("packet: Add fanout support.") Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 2dab80a8 ] After the ->set() spinlocks were removed br_stp_set_bridge_priority was left running without any protection when used via sysfs. It can race with port add/del and could result in use-after-free cases and corrupted lists. Tested by running port add/del in a loop with stp enabled while setting priority in a loop, crashes are easily reproducible. The spinlocks around sysfs ->set() were removed in commit: 14f98f25 ("bridge: range check STP parameters") There's also a race condition in the netlink priority support that is fixed by this change, but it was introduced recently and the fixes tag covers it, just in case it's needed the commit is: af615762 ("bridge: add ageing_time, stp_state, priority over netlink") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Fixes: 14f98f25 ("bridge: range check STP parameters") Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 2d45a02d ] ->auto_asconf_splist is per namespace and mangled by functions like sctp_setsockopt_auto_asconf() which doesn't guarantee any serialization. Also, the call to inet_sk_copy_descendant() was backuping ->auto_asconf_list through the copy but was not honoring ->do_auto_asconf, which could lead to list corruption if it was different between both sockets. This commit thus fixes the list handling by using ->addr_wq_lock spinlock to protect the list. A special handling is done upon socket creation and destruction for that. Error handlig on sctp_init_sock() will never return an error after having initialized asconf, so sctp_destroy_sock() can be called without addrq_wq_lock. The lock now will be take on sctp_close_sock(), before locking the socket, so we don't do it in inverse order compared to sctp_addr_wq_timeout_handler(). Instead of taking the lock on sctp_sock_migrate() for copying and restoring the list values, it's preferred to avoid rewritting it by implementing sctp_copy_descendant(). Issue was found with a test application that kept flipping sysctl default_auto_asconf on and off, but one could trigger it by issuing simultaneous setsockopt() calls on multiple sockets or by creating/destroying sockets fast enough. This is only triggerable locally. Fixes: 9f7d653b ("sctp: Add Auto-ASCONF support (core).") Reported-by:
Ji Jianwen <jiji@redhat.com> Suggested-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
-
Shaohua Li authored
[ Upstream commit fb05e7a8 ] We saw excessive direct memory compaction triggered by skb_page_frag_refill. This causes performance issues and add latency. Commit 5640f768 introduces the order-3 allocation. According to the changelog, the order-3 allocation isn't a must-have but to improve performance. But direct memory compaction has high overhead. The benefit of order-3 allocation can't compensate the overhead of direct memory compaction. This patch makes the order-3 page allocation atomic. If there is no memory pressure and memory isn't fragmented, the alloction will still success, so we don't sacrifice the order-3 benefit here. If the atomic allocation fails, direct memory compaction will not be triggered, skb_page_frag_refill will fallback to order-0 immediately, hence the direct memory compaction overhead is avoided. In the allocation failure case, kswapd is waken up and doing compaction, so chances are allocation could success next time. alloc_skb_with_frags is the same. The mellanox driver does similar thing, if this is accepted, we must fix the driver too. V3: fix the same issue in alloc_skb_with_frags as pointed out by Eric V2: make the changelog clearer Cc: Eric Dumazet <edumazet@google.com> Cc: Chris Mason <clm@fb.com> Cc: Debabrata Banerjee <dbavatar@gmail.com> Signed-off-by:
Shaohua Li <shli@fb.com> Acked-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 1a040eac ] Since the addition of sysfs multicast router support if one set multicast_router to "2" more than once, then the port would be added to the hlist every time and could end up linking to itself and thus causing an endless loop for rlist walkers. So to reproduce just do: echo 2 > multicast_router; echo 2 > multicast_router; in a bridge port and let some igmp traffic flow, for me it hangs up in br_multicast_flood(). Fix this by adding a check in br_multicast_add_router() if the port is already linked. The reason this didn't happen before the addition of multicast_router sysfs entries is because there's a !hlist_unhashed check that prevents it. Signed-off-by:
-
Sowmini Varadhan authored
commit 0edfad59 upstream. Since it is possible for vnet_event_napi to end up doing vnet_control_pkt_engine -> ... -> vnet_send_attr -> vnet_port_alloc_tx_ring -> ldc_alloc_exp_dring -> kzalloc() (i.e., in softirq context), kzalloc() should be called with GFP_ATOMIC from ldc_alloc_exp_dring. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Yann Droneaud authored
commit d6c763af upstream. Since commit 8a0a9bd4 ('random: make get_random_int() more random'), get_random_int() returns a random value for each call, so comment and hack introduced in mmap_rnd() as part of commit 1d18c47c ('arm64: MMU fault handling and page table management') are incorrects. Commit 1d18c47c seems to use the same hack introduced by commit a5adc91a ('powerpc: Ensure random space between stack and mmaps'), latter copied in commit 5a0efea0 ('sparc64: Sharpen address space randomization calculations.'). But both architectures were cleaned up as part of commit fa8cbaaf ('powerpc+sparc64/mm: Remove hack in mmap randomize layout') as hack is no more needed since commit 8a0a9bd4. So the present patch removes the comment and the hack around get_random_int() on AArch64's mmap_rnd(). Cc: David S. Miller <davem@davemloft.net> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Dan McGee <dpmcgee@gmail.com> Signed-off-by:
Yann Droneaud <ydroneaud@opteya.com> Signed-off-by:
-
Rajat Jain authored
commit 50b52fde upstream. Today it is there is no protection around pciehp_enable_slot() and pciehp_disable_slot() to ensure that they complete before another hot-plug operation can be done on that particular slot. This patch introduces the slot->hotplug_lock to ensure that any hotplug operations (add / remove) complete before another hotplug event can begin processing on that particular slot. Signed-off-by:
Rajat Jain <rajatxjain@gmail.com> Signed-off-by:
Rajat Jain <rajatjain@juniper.net> Signed-off-by:
Guenter Roeck <groeck@juniper.net> Signed-off-by:
Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by:
-
Al Viro authored
commit eee5cc27 upstream. The only thing we need it for is alt-sysrq-r (emergency remount r/o) and these days we can do just as well without going through the list of files. Signed-off-by:
-
Al Viro authored
commit 7eb5e882 upstream. Signed-off-by:
-
huaibin Wang authored
commit ac37e251 upstream. dst_orig should be released on error. Function like __xfrm_route_forward() expects that behavior. Since a recent commit, xfrm_lookup() may also be called by xfrm_lookup_route(), which expects the opposite. Let's introduce a new flag (XFRM_LOOKUP_KEEP_DST_REF) to tell what should be done in case of error. Fixes: f92ee619("xfrm: Generate blackhole routes only from route lookup functions") Signed-off-by:
huaibin Wang <huaibin.wang@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Bandan Das authored
commit f104765b upstream. If hardware doesn't support DecodeAssist - a feature that provides more information about the intercept in the VMCB, KVM decodes the instruction and then updates the next_rip vmcb control field. However, NRIP support itself depends on cpuid Fn8000_000A_EDX[NRIPS]. Since skip_emulated_instruction() doesn't verify nrip support before accepting control.next_rip as valid, avoid writing this field if support isn't present. Signed-off-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
-
Sebastien Szymanski authored
commit da946aea upstream. According to IMX6D/Q RM, table 18-3, sata clock's parent is ahb, not ipg. Signed-off-by:
Sebastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> [dirk.behme: Adjust moved file] Signed-off-by:
Dirk Behme <dirk.behme@gmail.com> Signed-off-by:
-
Filipe Manana authored
commit 5f5bc6b1 upstream. Replacing a xattr consists of doing a lookup for its existing value, delete the current value from the respective leaf, release the search path and then finally insert the new value. This leaves a time window where readers (getxattr, listxattrs) won't see any value for the xattr. Xattrs are used to store ACLs, so this has security implications. This change also fixes 2 other existing issues which were: *) Deleting the old xattr value without verifying first if the new xattr will fit in the existing leaf item (in case multiple xattrs are packed in the same item due to name hash collision); *) Returning -EEXIST when the flag XATTR_CREATE is given and the xattr doesn't exist but we have have an existing item that packs muliple xattrs with the same name hash as the input xattr. In this case we should return ENOSPC. A test case for xfstests follows soon. Thanks to Alexandre Oliva for reporting the non-atomicity of the xattr replace implementation. Reported-by:
Alexandre Oliva <oliva@gnu.org> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Chen Gang authored
commit b18c5d15 upstream. The related code can be simplified, and also can avoid related warnings (with allmodconfig under parisc): CC [M] net/netfilter/nfnetlink_cthelper.o net/netfilter/nfnetlink_cthelper.c: In function ‘nfnl_cthelper_from_nlattr’: net/netfilter/nfnetlink_cthelper.c:97:9: warning: passing argument 1 o ‘memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers] memcpy(&help->data, nla_data(attr), help->helper->data_len); ^ In file included from include/linux/string.h:17:0, from include/uapi/linux/uuid.h:25, from include/linux/uuid.h:23, from include/linux/mod_devicetable.h:12, from ./arch/parisc/include/asm/hardware.h:4, from ./arch/parisc/include/asm/processor.h:15, from ./arch/parisc/include/asm/spinlock.h:6, from ./arch/parisc/include/asm/atomic.h:21, from include/linux/atomic.h:4, from ./arch/parisc/include/asm/bitops.h:12, from include/linux/bitops.h:36, from include/linux/kernel.h:10, from include/linux/list.h:8, from include/linux/module.h:9, from net/netfilter/nfnetlink_cthelper.c:11: ./arch/parisc/include/asm/string.h:8:8: note: expected ‘void *’ but argument is of type ‘const char (*)[]’ void * memcpy(void * dest,const void *src,size_t count); ^ Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@soleta.eu> Signed-off-by:
-
Eugene Shatokhin authored
commit c80e5c0c upstream. On x86-64, __copy_instruction() always returns 0 (error) if the instruction uses %rip-relative addressing. This is because kernel_insn_init() is called the second time for 'insn' instance in such cases and sets all its fields to 0. Because of this, trying to place a kprobe on such instruction will fail, register_kprobe() will return -EINVAL. This patch fixes the problem. Signed-off-by:
Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20150317100918.28349.94654.stgit@localhost.localdomainSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Wen-chien Jesse Sung authored
commit ca79f232 upstream. Device info in /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e006 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Dmitry Tunin authored
commit ec0810d2 upstream. BugLink: https://bugs.launchpad.net/bugs/1449730 T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300f Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
-
Ben Hutchings authored
pipe_iov_copy_{from,to}_user() may be tried twice with the same iovec, the first time atomically and the second time not. The second attempt needs to continue from the iovec position, pipe buffer offset and remaining length where the first attempt failed, but currently the pipe buffer offset and remaining length are reset. This will corrupt the piped data (possibly also leading to an information leak between processes) and may also corrupt kernel memory. This was fixed upstream by commits f0d1bec9 ("new helper: copy_page_from_iter()") and 637b58c2 ("switch pipe_read() to copy_page_to_iter()"), but those aren't suitable for stable. This fix for older kernel versions was made by Seth Jennings for RHEL and I have extracted it from their update. CVE-2015-1805 References: https://bugzilla.redhat.com/show_bug.cgi?id=1202855Signed-off-by:Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Dmitry Tunin authored
commit 0d0cef61 upstream. BugLink: https://bugs.launchpad.net/bugs/1427680 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3474 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
-
Dmitry Tunin authored
commit 692c062e upstream. BugLink: https://bugs.launchpad.net/bugs/1462614 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
-
James Smart authored
commit 27f344eb upstream. Add a memory barrier to ensure the valid bit is read before any of the cqe payload is read. This fixes an issue seen on Power where the cqe payload was getting loaded before the valid bit. When this occurred, we saw an iotag out of range error when a command completed, but since the iotag looked invalid the command didn't get completed to scsi core. Later we hit the command timeout, attempted to abort the command, then waited for the aborted command to get returned. Since the adapter already returned the command, we timeout waiting, and end up escalating EEH all the way to host reset. This patch fixes this issue. Signed-off-by:
James Smart <james.smart@emulex.com> --- lpfc_sli.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Chris Wilson authored
commit c4d69da1 upstream. Running igt, I was encountering the invalid TLB bug on my 845g, despite that it was using the CS workaround. Examining the w/a buffer in the error state, showed that the copy from the user batch into the workaround itself was suffering from the invalid TLB bug (the first cacheline was broken with the first two words reversed). Time to try a fresh approach. This extends the workaround to write into each page of our scratch buffer in order to overflow the TLB and evict the invalid entries. This could be refined to only do so after we update the GTT, but for simplicity, we do it before each batch. I suspect this supersedes our current workaround, but for safety keep doing both. V2: The magic number shall be 2. This doesn't conclusively prove that it is the mythical TLB bug we've been trying to workaround for so long, that it requires touching a number of pages to prevent the corruption indicates to me that it is TLB related, but the corruption (the reversed cacheline) is more subtle than a TLB bug, where we would expect it to read the wrong page entirely. Oh well, it prevents a reliable hang for me and so probably for others as well. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
