Impact:	fix incorrect __init annotation

This patch removes the following section mismatch warning. A patch set
was send previously (http://lkml.org/lkml/2008/11/10/407). But
introduce some other problem, reported by Rufus
(http://lkml.org/lkml/2008/11/11/46). Then Ingo Molnar suggest that,
it's best to remove __init from xsave_cntxt_init(void). Which is the
second patch in this series. Now, this one removes the following
warning.

WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x2237): Section
mismatch in reference from the function cpu_init() to the function
.init.text:init_thread_xstate()
The function __cpuinit cpu_init() references
a function __init init_thread_xstate().
If init_thread_xstate is only used by cpu_init then
annotate init_thread_xstate with a matching annotation.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

__copy_from_user() will return invalid value 16 when it fails to
access user space and the size is 10.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Dell Optiplex 330 appears to hang on reboot. This is resolved by adding
a quirk to set bios reboot.
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
Signed-off-by: Steve Conklin <steve.conklin@canonical.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'iommu-fixes-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent

Impact: widen the reach of the low-memory-protect DMI quirk

Phoenix BIOSes variously identify their vendor as "Phoenix Technologies,
LTD" or "Phoenix Technologies LTD" (without the comma.)

This patch makes the identification string in the bad_bios_dmi_table
more general (following a suggestion by Ingo Molnar), so that both
versions are handled.

Again, the patched file compiles cleanly and the patch has been tested
successfully on my machine.
Signed-off-by: Philipp Kohlbecher <xt28@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: fix possible use of stale IO/TLB entries
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Impact: fix comparison length for 'fullflush'
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Impact: makes device isolation the default for AMD IOMMU

Some device drivers showed double-free bugs of DMA memory while testing
them with AMD IOMMU. If all devices share the same protection domain
this can lead to data corruption and data loss. Prevent this by putting
each device into its own protection domain per default.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Impact: add a new AMD IOMMU kernel command line parameter
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

this compiler warning:

  arch/x86/kernel/ds.c: In function 'ds_request':
  arch/x86/kernel/ds.c:368: warning: 'context' may be used uninitialized in this function

Shows that the code flow in ds_request() is buggy - it goes into
the unlock+release-context path even when the context is not allocated
yet.

First allocate the context, then do the other checks.

Also, take care with GFP allocations under the ds_lock spinlock.

Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  prevent cifs_writepages() from skipping unwritten pages
  Fixed parsing of mount options when doing DFS submount
  [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch
  [CIFS] Fix build break
  cifs: reinstate sharing of tree connections
  [CIFS] minor cleanup to cifs_mount
  cifs: reinstate sharing of SMB sessions sans races
  cifs: disable sharing session and tcon and add new TCP sharing code
  [CIFS] clean up server protocol handling
  [CIFS] remove unused list, add new cifs sock list to prepare for mount/umount fix
  [CIFS] Fix cifs reconnection flags
  [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error

Fixes a data corruption under heavy stress in which pages could be left
dirty after all open instances of a inode have been closed.

In order to write contiguous pages whenever possible, cifs_writepages()
asks pagevec_lookup_tag() for more pages than it may write at one time.
Normally, it then resets index just past the last page written before calling
pagevec_lookup_tag() again.

If cifs_writepages() can't write the first page returned, it wasn't resetting
index, and the next call to pagevec_lookup_tag() resulted in skipping all of
the pages it previously returned, even though cifs_writepages() did nothing
with them.  This can result in data loss when the file descriptor is about
to be closed.

This patch ensures that index gets set back to the next returned page so
that none get skipped.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Shirish S Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Since these hit the same routines, and are relatively small, it is easier to review
them as one patch.

Fixed incorrect handling of the last option in some cases
Fixed prefixpath handling convert path_consumed into host depended string length (in bytes)
Use non default separator if it is provided in the original mount options
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Impact: fix incorrectly marked unstable TSC clock

Patch (commit 0d12cdd5 "sched: improve sched_clock() performance") has
a regression on one of the test systems here.

With the patch, I see:

 checking TSC synchronization [CPU#0 -> CPU#1]:
 Measured 28 cycles TSC warp between CPUs, turning off TSC clock.
 Marking TSC unstable due to check_tsc_sync_source failed

Whereas, without the patch syncs pass fine on all CPUs:

 checking TSC synchronization [CPU#0 -> CPU#1]: passed.

Due to this, TSC is marked unstable, when it is not actually unstable.
This is because syncs in check_tsc_wrap() goes away due to this commit.

As per the discussion on this thread, correct way to fix this is to add
explicit syncs as below?
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

For some unknown reason at Steven Rostedt added in disabling of the SPE
instruction generation for e500 based PPC cores in commit
6ec56232.

We are removing it because:

1. It generates e500 kernels that don't work
2. its not the correct set of flags to do this
3. we handle this in the arch/powerpc/Makefile already
4. its unknown in talking to Steven why he did this
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tested-and-Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: Correct WM8350 I2C return code usage
  mfd: fix event masking for da9030

Impact: fix guest kernel crash with CONFIG_XEN_SCRUB_PAGES=y

Jens noticed that scrub_page() has a buggy unmap of the wrong
thing. (virtual address instead of page)

Linus pointed out that the whole scrub_page() code is an unnecessary
reimplementation of clear_highpage() to begin with.

Just use clear_highpage() rather than reimplementing it poorly.
Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

set tcon->ses earlier

If the inital tree connect fails, we'll end up calling cifs_put_smb_ses
with a NULL pointer. Fix it by setting the tcon->ses earlier.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  rtc: rtc-sun4v fixes, revised
  sparc: Fix tty compile warnings.
  sparc: struct device - replace bus_id with dev_name(), dev_set_name()

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  rtnetlink: propagate error from dev_change_flags in do_setlink()
  isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply
  Phonet: refuse to send bigger than MTU packets
  e1000e: fix IPMI traffic
  e1000e: fix warn_on reload after phy_id error
  phy: fix phy address bug
  e100: fix dma error in direction for mapping
  igb: use dev_printk instead of printk
  qla3xxx: Cleanup: Fix link print statements.
  igb: Use device_set_wakeup_enable
  e1000: Use device_set_wakeup_enable
  e1000e: Use device_set_wakeup_enable
  via-velocity: enable perfect filtering for multicast packets
  phy: Add support for Marvell 88E1118 PHY
  mlx4_en: Pause parameters per port
  phylib: fix premature freeing of struct mii_bus
  atl1: Do not enumerate options unsupported by chip
  atl1e: fix broken multicast by removing unnecessary crc inversion
  gianfar: Fix DMA unmap invocations
  net/ucc_geth: Fix oops in uec_get_ethtool_stats()
  ...

Unlike ifconfig, iproute doesn't report an error when setting
an interface up fails:

(example: put wireless network mac80211 interface into repeater mode
with iwconfig but do not set a peer MAC address, it should fail with
-ENOLINK)

without patch:
# ip link set wlan0 up ; echo $?
0
# 

with patch:
# ip link set wlan0 up ; echo $?
RTNETLINK answers: Link has been severed
2
# 

Propagate the return value from dev_change_flags() to fix this.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit a144ea4b [IPV4]: annotate struct in_ifaddr

Missed this extra byteswap as the isdn inlines hide the htonl inside
put_u32 which causes an extra byteswap on little-endian arches.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Steve French <sfrench@us.ibm.com>

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a similar approach to the SMB session sharing. Add a list of tcons
attached to each SMB session. Move the refcount to non-atomic. Protect
all of the above with the cifs_tcp_ses_lock. Add functions to
properly find and put references to the tcons.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Some users reported that they have machines with BMCs enabled that cannot
receive IPMI traffic after e1000e is loaded.
http://marc.info/?l=e1000-devel&m=121909039127414&w=2
http://marc.info/?l=e1000-devel&m=121365543823387&w=2

This fixes the issue if they load with the new parameter = 0 by disabling
crc stripping, but leaves the performance feature on for most users.
Based on work done by Hong Zhang.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the driver fails to initialize the first time due to the failure in the
phy_id check the kernel triggers a warn_on on the second try to load the
driver because the driver did not free the msi/x resources in the first
load because of the previous failure in phy_id check.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix an unitialized return value when compiling on parisc (with CONFIG_UNEVICTABLE_LRU=y):
	mm/mlock.c: In function `__mlock_vma_pages_range':
	mm/mlock.c:165: warning: `ret' might be used uninitialized in this function
Signed-off-by: Helge Deller <deller@gmx.de>
[ It isn't ever really used uninitialized, since no caller should ever
  call this function with an empty range.  But the compiler is correct
  that from a local analysis standpoint that is impossible to see, and
  fixing the warning is appropriate.  ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Bug #11989: Suspend failure on NForce4-based boards due to chanes in
stop_machine

We should not access active.fnret outside the lock; in theory the next
stop_machine could overwrite it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

D'oh...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-and-tested-by: Peter Palfrader <peter@palfrader.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The vendor BSP used for the WM8350 development provided an I2C driver
which incorrectly returned zero on succesful sends rather than the
number of transmitted bytes, an error which was then propagated into the
WM8350 I2C accessors.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

Commit 0794469d: ("ACPI: struct device -
replace bus_id with dev_name(), dev_set_name()") introduced a bug by
testing 'dev_name(ldev)' instead of 'ldev->bus' for NULL when printing
out the bus information.

So if ldev->bus was NULL, we'd oops.
Reported-and-tested-by: Bruno Prmont <bonbons@linux-vserver.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PHYID returns 0xffff and not 0xffffffff when not found and in some
case(at91sam9263) 0x0. Maybe this patch could be useful.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The e100 driver triggers BUG_ON(buf->direction != dir)
by doing pci_map_single(..., PCI_DMA_BIDIRECTIONAL)
and pci_dma_sync_single_for_device(..., PCI_DMA_TODEVICE).

Changing the DMA direction, especially with dmabounce will result
in unexpected behaviour.
Reported-by: Anders Grafstrom <grfstrm@users.sourceforge.net>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dev_printk() instead of printk() to give a little more context
and use consistent format.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removed debug print statements and improved conditionals around informational statements.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set/unset this bit whenever WOL is enabled/disabled using
igb_set_wol().  Accordingly, use device_can_wakeup() for checking
if wake-up is supported by the device.
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set/unset this bit whenever WOL is enabled/disabled using
e1000_set_wol().  Accordingly, use device_can_wakeup() for checking
if wake-up is supported by the device.
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set/unset this bit whenever WOL is enabled/disabled using
e1000_set_wol().  Accordingly, use device_can_wakeup() for checking
if wake-up is supported by the device.
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>