- 08 Jun, 2016 40 commits
-
-
Tim Sell authored
We never issue SCSI commands of type CMD_VDISKMGMT_TYPE, so there is no need to have code that processes their completions. Signed-off-by:
Tim Sell <Timothy.Sell@unisys.com> Signed-off-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Remove svn-ids and fix typos in the licence declaration. Add my copyright to the sdio code which I worked on mainly. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Wolfram Sang authored
They were counted but never really used anywhere. Also change the printk to a debug print, since it mostly shows on the expected -ENOMEDIUM on card removal. Signed-off-by:
-
Wolfram Sang authored
The printouts are not needed, the driver core has enough debug output for this if wanted. So, use a helper to save boilerplate code. Signed-off-by:
-
Wolfram Sang authored
trans_start is gone from netdevice, so use the new helper function to set the mark. Signed-off-by:
-
Wolfram Sang authored
List all authors, beautify description, match license to what is stated in file headers, add firmware information. Signed-off-by:
-
Wolfram Sang authored
There is only this card supported, no need to iterate over the table. The resulting firmware filename wasn't used anyway, but came from the config file or hardcoded default. Signed-off-by:
-
Wolfram Sang authored
Unlike the previous patches which are plain indent outcomes, this has some manual fixups to be not overly strict with the 80 char limit. Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Let's simply specify the struct to keep in sync with kernel coding style. Signed-off-by:
-
Wolfram Sang authored
We want to remove it, but to do so properly, it is good to have a working example. Needs to be copied to /lib/firmware in order to be used. Signed-off-by:
-
Wolfram Sang authored
Use proper type for size_t. Signed-off-by:
-
Wolfram Sang authored
We have sane defaults, so we don't need to bail out if there is no config file. Note that the config file should go away completely in favour of configuration mechanisms already upstream. Signed-off-by:
-
Wolfram Sang authored
The loop variable was defined but not really used. Fix this. Signed-off-by:
-
Wolfram Sang authored
Move the one debug macro to the generic wlan header. Signed-off-by:
-
Wolfram Sang authored
No need for an open coded one. Signed-off-by:
-
Wolfram Sang authored
I had a problem connecting to a network with a short preamble, so let's make the safer option the default. Signed-off-by:
-
Wolfram Sang authored
My Spectec SDW823 card oopsed when it was already inserted during boot. When debugging this, I noticed that the card init was done in a seperate workqueue which was only activated once in probe. After removing the workqueue and calling the card init directly from probe, the OOPS went away. It turned out this is the same OOPS which happened when removing the card, so this seems possible now. Note: There is still a not-understood card-removed event during boot, but at least it doesn't crash anymore and the card will be re-probed right away. Signed-off-by:
-
Wolfram Sang authored
No need to be backwards compatible. Signed-off-by:
-
Wolfram Sang authored
We are by far newer than that anyhow. Signed-off-by:
-
Wolfram Sang authored
FW_LOADER works fine, no need for a open coded fallback. Signed-off-by:
-
Wolfram Sang authored
I couldn't find any trace of code or even products using ks7010 with something else than SDIO. So, remove the conditionals. Signed-off-by:
-
Wolfram Sang authored
See the TODO for details where this driver came from. Only a few minor changes were made to make the driver suitable for staging: * updated Kconfig help text and dependencies * added TODO * removed two __DATE__ and __TIME__ printouts to allow reproducible builds * added to staging main Kconfig + Makefile Tested on a Renesas Salvator-X board with a Spectec SDW-823 card. I could connect to a WPA-protected network. Signed-off-by:
-
Tobin C Harding authored
A number of function definitions were found to be candidates for static scoping. This patch adds static to these functions. Signed-off-by:
Tobin C Harding <me@tobin.cc> Signed-off-by:
-
Oleg Drokin authored
There was a proper debugging function by that name that's long gone. The currently remaining shadow that always returns true is not really useful so it could be dropped along with all the asserts it is part of. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
-
Oleg Drokin authored
It's no longer used and never set anywhere. Signed-off-by:
-
Jinshan Xiong authored
In ll_readpage and ll_write_begin, it needs to find out the cl_env and cl_io, a.k.a ll_cl_context, when the IO is initialized. It used to call cl_env_get() to figure it out but turned out to be contended if multiple threads are doing IO. In this patch, a per open file ll_cl_context cache is created. When IO type of CIT_READ, CIT_WRITE and CIR_FAULT is initialized, it will add a ll_cl_context into the cache maintained in ll_file_data. In this case, the ll_cl_context can be found in ll_readpage and ll_write_begin later. Signed-off-by:
Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-on: http://review.whamcloud.com/10503 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5108 Reviewed-on: http://review.whamcloud.com/10955 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5260Reviewed-by:
Lai Siyao <lai.siyao@intel.com> Reviewed-by:
Bobi Jam <bobijam@gmail.com> Signed-off-by:
Oleg Drokin <oleg.drokin@intel.com> Signed-off-by:
-
Jinshan Xiong authored
In lov_stripe_pgoff(), it calls lov_stripe_size() to calculate the file size by ost_size, which will be wrong if the stripe_index happens to be stripe aligned. Signed-off-by:
Bobi Jam <bobijam@hotmail.com> Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Signed-off-by:
-
James Simmons authored
Commit b8a7a3a6 change get_acl() for posix xattr to always cache the ACL which increases the reference count. That reference count can be reduced by have ll_get_acl() call forget_cached_acl() which it wasn't. When an inode gets deleted by Lustre the POSIX ACL reference count is tested to ensure its 1 and if not produces an error. Since forget_cached_acl() was not called Lustre started to complain. This patch changes ll_get_acl() to call forget_cached_acl(). Signed-off-by:
James Simmons <jsimmons@infradead.org> Reviewed-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
Tobin C Harding authored
kzalloc call followed by copy_to_user can be replaced by call to memdup_user. Signed-off-by:
-
Lidza Louina authored
The lustre_msg_buf method could return NULL. Subsequent code didn't check if it's null before using it. This patch adds two checks. Signed-off-by:
Lidza Louina <lidza.louina@oracle.com> Acked-by:
-
