- 20 Oct, 2014 4 commits
-
-
Frank Schaefer authored
commit 627530c3 upstream. When a new video frame is started, the driver takes the next video buffer from the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf for further processing. On streaming stop we currently only give back the pending buffers from the list but not the ones which are currently processed. This causes the following warning from the vb2 core since kernel 3.15: ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]() [...] Call Trace: [<c0769c46>] dump_stack+0x48/0x69 [<c0245b69>] warn_slowpath_common+0x79/0x90 [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<c0245bfd>] warn_slowpath_null+0x1d/0x20 [<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core] [<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core] [<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core] [<f8e45895>] v4l_streamoff+0x15/0x20 [videodev] [<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<c039d0e7>] ? fsnotify+0x1e7/0x2b0 [<f8e49012>] video_ioctl2+0x12/0x20 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev] [<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev] [<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0 [<c0368eec>] ? vfs_write+0x13c/0x1c0 [<c0369a8f>] ? vfs_writev+0x2f/0x50 [<c0379028>] SyS_ioctl+0x58/0x80 [<c076fff3>] sysenter_do_call+0x12/0x12 ---[ end trace 5545f934409f13f4 ]--- ... Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled this long standing issue and who has investigated it further. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Mauro Carvalho Chehab authored
commit 29bbb7bd upstream. Add support for PCTV microStick (77e) device that uses a sms1140 chipset. Signed-off-by:
-
Xuelin Shi authored
commit 87cea763 upstream. the partial xor result must be kept until the next tx is generated. Signed-off-by:
Xuelin Shi <xuelin.shi@freescale.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Loic Poulain authored
commit 4807b518 upstream. In this expression: seq = (seq - 1) % 8 seq (u8) is implicitly converted to an int in the arithmetic operation. So if seq value is 0, operation is ((0 - 1) % 8) => (-1 % 8) => -1. The new seq value is 0xff which is an invalid ACK value, we expect 0x07. It leads to frequent dropped ACK and retransmission. Fix this by using '&' binary operator instead of '%'. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
- 14 Oct, 2014 1 commit
-
-
Kamal Mostafa authored
Signed-off-by:
-
- 13 Oct, 2014 1 commit
-
-
Jens Axboe authored
commit 46f341ff upstream. Commit 2da78092 changed the locking from a mutex to a spinlock, so we now longer sleep in this context. But there was a leftover might_sleep() in there, which now triggers since we do the final free from an RCU callback. Get rid of it. Reported-by:
Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
- 09 Oct, 2014 34 commits
-
-
Josh Triplett authored
commit 62b4d204 upstream. commit 03b8c7b6 ("futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test") added the HAVE_FUTEX_CMPXCHG symbol right below FUTEX. This placed it right in the middle of the options for the EXPERT menu. However, HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops placing items in the EXPERT menu, and displays the remaining several EXPERT items (starting with EPOLL) directly in the General Setup menu. Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make HAVE_FUTEX_CMPXCHG itself depend on FUTEX. With this change, the subsequent items display as part of the EXPERT menu again; the EMBEDDED menu now appears as the next top-level item in the General Setup menu, which makes General Setup much shorter and more usable. Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Josh Triplett authored
commit 361e9dfb upstream. The buffers sized by CONFIG_LOG_BUF_SHIFT and CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't ask about their size at all. Signed-off-by:
-
Johannes Weiner authored
commit abe5f972 upstream. The zone allocation batches can easily underflow due to higher-order allocations or spills to remote nodes. On SMP that's fine, because underflows are expected from concurrency and dealt with by returning 0. But on UP, zone_page_state will just return a wrapped unsigned long, which will get past the <= 0 check and then consider the zone eligible until its watermarks are hit. 3a025760 ("mm: page_alloc: spill to remote nodes before waking kswapd") already made the counter-resetting use atomic_long_read() to accomodate underflows from remote spills, but it didn't go all the way with it. Make it clear that these batches are expected to go negative regardless of concurrency, and use atomic_long_read() everywhere. Fixes: 81c0a2bb ("mm: page_alloc: fair zone allocator policy") Reported-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> [ kamal: Johannes' 3.12 backport applied to 3.13-stable ] Signed-off-by:
-
Peter Zijlstra authored
commit 6c72e350 upstream. Oleg noticed that a cleanup by Sylvain actually uncovered a bug; by calling perf_event_free_task() when failing sched_fork() we will not yet have done the memset() on ->perf_event_ctxp[] and will therefore try and 'free' the inherited contexts, which are still in use by the parent process. This is bad.. Suggested-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Sylvain 'ythier' Hitier <sylvain.hitier@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Johannes Weiner authored
commit 2f7dd7a4 upstream. The cgroup iterators yield css objects that have not yet gone through css_online(), but they are not complete memcgs at this point and so the memcg iterators should not return them. Commit d8ad3055 ("mm/memcg: iteration skip memcgs not yet fully initialized") set out to implement exactly this, but it uses CSS_ONLINE, a cgroup-internal flag that does not meet the ordering requirements for memcg, and so the iterator may skip over initialized groups, or return partially initialized memcgs. The cgroup core can not reasonably provide a clear answer on whether the object around the css has been fully initialized, as that depends on controller-specific locking and lifetime rules. Thus, introduce a memcg-specific flag that is set after the memcg has been initialized in css_online(), and read before mem_cgroup_iter() callers access the memcg members. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Steve French authored
commit 19e81573 upstream. Changeset eb85d94b introduced a problem where if a cifs open fails during query info of a file we will still try to close the file (happens with certain types of reparse points) even though the file handle is not valid. In addition for SMB2/SMB3 we were not mapping the return code returned by Windows when trying to open a file (like a Windows NFS symlink) which is a reparse point. Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
-
Mel Gorman authored
commit abc40bd2 upstream. This patch reverts 1ba6e0b5 ("mm: numa: split_huge_page: transfer the NUMA type from the pmd to the pte"). If a huge page is being split due a protection change and the tail will be in a PROT_NONE vma then NUMA hinting PTEs are temporarily created in the protected VMA. VM_RW|VM_PROTNONE |-----------------| ^ split here In the specific case above, it should get fixed up by change_pte_range() but there is a window of opportunity for weirdness to happen. Similarly, if a huge page is shrunk and split during a protection update but before pmd_numa is cleared then a pte_numa can be left behind. Instead of adding complexity trying to deal with the case, this patch will not mark PTEs NUMA when splitting a huge page. NUMA hinting faults will not be triggered which is marginal in comparison to the complexity in dealing with the corner cases during THP split. Signed-off-by:
Rik van Riel <riel@redhat.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Mel Gorman authored
commit d3cb8bf6 upstream. A migration entry is marked as write if pte_write was true at the time the entry was created. The VMA protections are not double checked when migration entries are being removed as mprotect marks write-migration-entries as read. It means that potentially we take a spurious fault to mark PTEs write again but it's straight-forward. However, there is a race between write migrations being marked read and migrations finishing. This potentially allows a PTE to be write that should have been read. Close this race by double checking the VMA permissions using maybe_mkwrite when migration completes. [torvalds@linux-foundation.org: use maybe_mkwrite] Signed-off-by:
-
NeilBrown authored
commit 8e0e99ba upstream. It has come to my attention (thanks Martin) that 'discard_zeroes_data' is only a hint. Some devices in some cases don't do what it says on the label. The use of DISCARD in RAID5 depends on reads from discarded regions being predictably zero. If a write to a previously discarded region performs a read-modify-write cycle it assumes that the parity block was consistent with the data blocks. If all were zero, this would be the case. If some are and some aren't this would not be the case. This could lead to data corruption after a device failure when data needs to be reconstructed from the parity. As we cannot trust 'discard_zeroes_data', ignore it by default and so disallow DISCARD on all raid4/5/6 arrays. As many devices are trustworthy, and as there are benefits to using DISCARD, add a module parameter to over-ride this caution and cause DISCARD to work if discard_zeroes_data is set. If a site want to enable DISCARD on some arrays but not on others they should select DISCARD support at the filesystem level, and set the raid456 module parameter. raid456.devices_handle_discard_safely=Y As this is a data-safety issue, I believe this patch is suitable for -stable. DISCARD support for RAID456 was added in 3.7 Cc: Shaohua Li <shli@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Heinz Mauelshagen <heinzm@redhat.com> Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Mike Snitzer <snitzer@redhat.com> Fixes: 620125f2Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Nathan Lynch authored
commit 9cc6d9e5 upstream. Joachim Eastwood reports that commit fbfb872f "ARM: 8148/1: flush TLS and thumbee register state during exec" causes a boot-time crash on a Cortex-M4 nommu system: Freeing unused kernel memory: 68K (281e5000 - 281f6000) Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-rc6-00313-gd2205fa30aa7 #191 task: 29834000 ti: 29832000 task.ti: 29832000 PC is at flush_thread+0x2e/0x40 LR is at flush_thread+0x21/0x40 pc : [<2800954a>] lr : [<2800953d>] psr: 4100000b sp : 29833d60 ip : 00000000 fp : 00000001 r10: 00003cf8 r9 : 29b1f000 r8 : 00000000 r7 : 29b0bc00 r6 : 29834000 r5 : 29832000 r4 : 29832000 r3 : ffff0ff0 r2 : 29832000 r1 : 00000000 r0 : 282121f0 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-rc6-00313-gd2205fa30aa7 #191 [<2800afa5>] (unwind_backtrace) from [<2800a327>] (show_stack+0xb/0xc) [<2800a327>] (show_stack) from [<2800a963>] (__invalid_entry+0x4b/0x4c) The problem is that set_tls is attempting to clear the TLS location in the kernel-user helper page, which isn't set up on V7M. Fix this by guarding the write to the kuser helper page with a CONFIG_KUSER_HELPERS ifdef. Fixes: fbfb872f ARM: 8148/1: flush TLS and thumbee register state during exec Reported-by:
Joachim Eastwood <manabian@gmail.com> Tested-by:
Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Chris Wilson authored
commit 91e56499 upstream. As we use WC updates of the PTE, we are responsible for notifying the hardware when to flush its TLBs. Do so after we zap all the PTEs before suspend (and the BIOS tries to read our GTT). Fixes a regression from commit 828c7908 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Wed Oct 16 09:21:30 2013 -0700 drm/i915: Disable GGTT PTEs on GEN6+ suspend that survived and continue to cause harm even after commit e568af1c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 26 20:08:20 2014 +0100 drm/i915: Undo gtt scratch pte unmapping again v2: Trivial rebase. v3: Fixes requires pointer dances. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82340 Tested-by: ming.yao@intel.com Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Todd Previte <tprevite@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit d62dbf77 upstream. When building this driver as a module, we get a helpful warning about the return type: drivers/cpufreq/integrator-cpufreq.c:232:2: warning: initialization from incompatible pointer type .remove = __exit_p(integrator_cpufreq_remove), If the remove callback returns void, the caller gets an undefined value as it expects an integer to be returned. This fixes the problem by passing down the value from cpufreq_unregister_driver. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Xiubo Li authored
commit 6596aa04 upstream. Since we cannot make sure the 'params->num_regs' will always be none zero here, and then if it equals to zero, the kmemdup() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kmemdup(). Signed-off-by:
Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by:
Mark Brown <broonie@kernel.org> [ kamal: backport to 3.13-stable: context ] Signed-off-by:
-
Robin Murphy authored
commit 5ca918e5 upstream. The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn instructions (where the optional alignment hint is given but incorrect) as LDR/STR, leading to register corruption. Detect these and correctly treat them as unhandled, so that userspace gets the fault it expects. Reported-by:
Simon Hosie <simon.hosie@arm.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Miklos Szeredi authored
commit b928095b upstream. If overwriting an empty directory with rename, then need to drop the extra nlink. Test prog: #include <stdio.h> #include <fcntl.h> #include <err.h> #include <sys/stat.h> int main(void) { const char *test_dir1 = "test-dir1"; const char *test_dir2 = "test-dir2"; int res; int fd; struct stat statbuf; res = mkdir(test_dir1, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir1); res = mkdir(test_dir2, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir2); fd = open(test_dir2, O_RDONLY); if (fd == -1) err(1, "open(\"%s\")", test_dir2); res = rename(test_dir1, test_dir2); if (res == -1) err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2); res = fstat(fd, &statbuf); if (res == -1) err(1, "fstat(%i)", fd); if (statbuf.st_nlink != 0) { fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink); return 1; } return 0; } Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Peter Feiner authored
commit dbab31aa upstream. This fixes the same bug as b43790ee ("mm: softdirty: don't forget to save file map softdiry bit on unmap") and 9aed8614 ("mm/memory.c: don't forget to set softdirty on file mapped fault") where the return value of pte_*mksoft_dirty was being ignored. To be sure that no other pte/pmd "mk" function return values were being ignored, I annotated the functions in arch/x86/include/asm/pgtable.h with __must_check and rebuilt. The userspace effect of this bug is that the softdirty mark might be lost if a file mapped pte get zapped. Signed-off-by:
Peter Feiner <pfeiner@google.com> Acked-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Jamie Liu <jamieliu@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
David Rientjes authored
commit d4a5fca5 upstream. Since commit 45906855 ("mm/sl[aou]b: Common alignment code"), the "ralign" automatic variable in __kmem_cache_create() may be used as uninitialized. The proper alignment defaults to BYTES_PER_WORD and can be overridden by SLAB_RED_ZONE or the alignment specified by the caller. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=85031Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Andrei Elovikov <a.elovikov@gmail.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Joseph Qi authored
commit 5760a97c upstream. There is a deadlock case which reported by Guozhonghua: https://oss.oracle.com/pipermail/ocfs2-devel/2014-September/010079.html This case is caused by &res->spinlock and &dlm->master_lock misordering in different threads. It was introduced by commit 8d400b81 ("ocfs2/dlm: Clean up refmap helpers"). Since lockres is new, it doesn't not require the &res->spinlock. So remove it. Fixes: 8d400b81 ("ocfs2/dlm: Clean up refmap helpers") Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
joyce.xue <xuejiufei@huawei.com> Reported-by:
Guozhonghua <guozhonghua@h3c.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Andreas Rohner authored
commit 56d7acc7 upstream. This bug leads to reproducible silent data loss, despite the use of msync(), sync() and a clean unmount of the file system. It is easily reproducible with the following script: ----------------[BEGIN SCRIPT]-------------------- mkfs.nilfs2 -f /dev/sdb mount /dev/sdb /mnt dd if=/dev/zero bs=1M count=30 of=/mnt/testfile umount /mnt mount /dev/sdb /mnt CHECKSUM_BEFORE="$(md5sum /mnt/testfile)" /root/mmaptest/mmaptest /mnt/testfile 30 10 5 sync CHECKSUM_AFTER="$(md5sum /mnt/testfile)" umount /mnt mount /dev/sdb /mnt CHECKSUM_AFTER_REMOUNT="$(md5sum /mnt/testfile)" umount /mnt echo "BEFORE MMAP:\t$CHECKSUM_BEFORE" echo "AFTER MMAP:\t$CHECKSUM_AFTER" echo "AFTER REMOUNT:\t$CHECKSUM_AFTER_REMOUNT" ----------------[END SCRIPT]-------------------- The mmaptest tool looks something like this (very simplified, with error checking removed): ----------------[BEGIN mmaptest]-------------------- data = mmap(NULL, file_size - file_offset, PROT_READ | PROT_WRITE, MAP_SHARED, fd, file_offset); for (i = 0; i < write_count; ++i) { memcpy(data + i * 4096, buf, sizeof(buf)); msync(data, file_size - file_offset, MS_SYNC)) } ----------------[END mmaptest]-------------------- The output of the script looks something like this: BEFORE MMAP: 281ed1d5ae50e8419f9b978aab16de83 /mnt/testfile AFTER MMAP: 6604a1c31f10780331a6850371b3a313 /mnt/testfile AFTER REMOUNT: 281ed1d5ae50e8419f9b978aab16de83 /mnt/testfile So it is clear, that the changes done using mmap() do not survive a remount. This can be reproduced a 100% of the time. The problem was introduced in commit 136e8770 ("nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary"). If the page was read with mpage_readpage() or mpage_readpages() for example, then it has no buffers attached to it. In that case page_has_buffers(page) in nilfs_set_page_dirty() will be false. Therefore nilfs_set_file_dirty() is never called and the pages are never collected and never written to disk. This patch fixes the problem by also calling nilfs_set_file_dirty() if the page has no buffers attached to it. [akpm@linux-foundation.org: s/PAGE_SHIFT/PAGE_CACHE_SHIFT/] Signed-off-by:
Andreas Rohner <andreas.rohner@gmx.net> Tested-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Markos Chandras authored
commit 8a574cfa upstream. Every mcount() call in the MIPS 32-bit kernel is done as follows: [...] move at, ra jal _mcount addiu sp, sp, -8 [...] but upon returning from the mcount() function, the stack pointer is not adjusted properly. This is explained in details in 58b69401 (MIPS: Function tracer: Fix broken function tracing). Commit ad8c3969 ("MIPS: Unbreak function tracer for 64-bit kernel.) fixed the stack manipulation for 64-bit but it didn't fix it completely for MIPS32. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7792/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Wanpeng Li authored
commit 03bd4e1f upstream. The following bug can be triggered by hot adding and removing a large number of xen domain0's vcpus repeatedly: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group PGD 5a9d5067 PUD 13067 PMD 0 Oops: 0000 [#3] SMP [...] Call Trace: load_balance ? _raw_spin_unlock_irqrestore idle_balance __schedule schedule schedule_timeout ? lock_timer_base schedule_timeout_uninterruptible msleep lock_device_hotplug_sysfs online_store dev_attr_store sysfs_write_file vfs_write SyS_write system_call_fastpath Last level cache shared mask is built during CPU up and the build_sched_domain() routine takes advantage of it to setup the sched domain CPU topology. However, llc_shared_mask is not released during CPU disable, which leads to an invalid sched domainCPU topology. This patch fix it by releasing the llc_shared_mask correctly during CPU disable. Yasuaki also reported that this can happen on real hardware: https://lkml.org/lkml/2014/7/22/1018 His case is here: == Here is an example on my system. My system has 4 sockets and each socket has 15 cores and HT is enabled. In this case, each core of sockes is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-44, 90-104 Socket#3 | 45-59, 105-119 Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-44 and 90-104. When hot-removing socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30 remains having 0x3fff80000001fffc0000000. After that, when hot-adding socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-59 Socket#3 | 90-119 Then llc_shared_mask of CPU#30 becomes 0x3fff8000fffffffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-59 and 90-104. So the mask has the wrong value. Signed-off-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Tested-by:
Linn Crosetto <linn@hp.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Toshi Kani <toshi.kani@hp.com> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1411547885-48165-1-git-send-email-wanpeng.li@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
John David Anglin authored
commit d26a7730 upstream. In spite of what the GCC manual says, the -mfast-indirect-calls has never been supported in the 64-bit parisc compiler. Indirect calls have always been done using function descriptors irrespective of the -mfast-indirect-calls option. Recently, it was noticed that a function descriptor was always requested when the -mfast-indirect-calls option was specified. This caused problems when the option was used in application code and doesn't make any sense because the whole point of the option is to avoid using a function descriptor for indirect calls. Fixing this broke 64-bit kernel builds. I will fix GCC but for now we need the attached change. This results in the same kernel code as before. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Alex Deucher authored
commit 370ce45b upstream. Otherwise we may fail to init the second compute ring. Noticed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Anton Altaparmakov authored
commit f2d5a944 upstream. On 32-bit architectures, the legacy buffer_head functions are not always handling the sector number with the proper 64-bit types, and will thus fail on 4TB+ disks. Any code that uses __getblk() (and thus bread(), breadahead(), sb_bread(), sb_breadahead(), sb_getblk()), and calls it using a 64-bit block on a 32-bit arch (where "long" is 32-bit) causes an inifinite loop in __getblk_slow() with an infinite stream of errors logged to dmesg like this: __find_get_block_slow() failed. block=6740375944, b_blocknr=2445408648 b_state=0x00000020, b_size=512 device sda1 blocksize: 512 Note how in hex block is 0x191C1F988 and b_blocknr is 0x91C1F988 i.e. the top 32-bits are missing (in this case the 0x1 at the top). This is because grow_dev_page() is broken and has a 32-bit overflow due to shifting the page index value (a pgoff_t - which is just 32 bits on 32-bit architectures) left-shifted as the block number. But the top bits to get lost as the pgoff_t is not type cast to sector_t / 64-bit before the shift. This patch fixes this issue by type casting "index" to sector_t before doing the left shift. Note this is not a theoretical bug but has been seen in the field on a 4TiB hard drive with logical sector size 512 bytes. This patch has been verified to fix the infinite loop problem on 3.17-rc5 kernel using a 4TB disk image mounted using "-o loop". Without this patch doing a "find /nt" where /nt is an NTFS volume causes the inifinite loop 100% reproducibly whilst with the patch it works fine as expected. Signed-off-by:
Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
-
Clemens Ladisch authored
commit a9960e6a upstream. The calculated frame size was wrong because snd_pcm_format_physical_width() actually returns the number of bits, not bytes. Use snd_pcm_format_size() instead, which not only returns bytes, but also simplifies the calculation. Fixes: 8bea869c ("ALSA: PCM midlevel: improve fifo_size handling") Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
NeilBrown authored
commit b8cb6b4c upstream. If a devices is being recovered it is not InSync and is not Faulty. If a read error is experienced on that device, fix_read_error() will be called, but it ignores non-InSync devices. So it will neither fix the error nor fail the device. It is incorrect that fix_read_error() ignores non-InSync devices. It should only ignore Faulty devices. So fix it. This became a bug when we allowed reading from a device that was being recovered. It is suitable for any subsequent -stable kernel. Fixes: da8840a7Reported-by:
Alexander Lyakas <alex.bolshoy@gmail.com> Tested-by:
-
NeilBrown authored
commit 34e97f17 upstream. Both normal IO and resync IO can be retried with reschedule_retry() and so be counted into ->nr_queued, but only normal IO gets counted in ->nr_pending. Before the recent improvement to RAID1 resync there could only possibly have been one or the other on the queue. When handling a read failure it could only be normal IO. So when handle_read_error() called freeze_array() the fact that freeze_array only compares ->nr_queued against ->nr_pending was safe. But now that these two types can interleave, we can have both normal and resync IO requests queued, so we need to count them both in nr_pending. This error can lead to freeze_array() hanging if there is a read error, so it is suitable for -stable. Fixes: 79ef3a8aReported-by:
Brassow Jonathan <jbrassow@redhat.com> Signed-off-by:
-
NeilBrown authored
commit c2fd4c94 upstream. raise_barrier() uses next_resync as part of its calculations, so it really should be updated first, instead of afterwards. next_resync is always used under resync_lock so update it under resync lock to, just before it is used. That is safest. This could cause normal IO and resync IO to interact badly so it suitable for -stable. Fixes: 79ef3a8aSigned-off-by:
-
NeilBrown authored
commit 23554960 upstream. next_resync is (approximately) the location for the next resync request. However it does *not* reliably determine the earliest location at which resync might be happening. This is because resync requests can complete out of order, and we only limit the number of current requests, not the distance from the earliest pending request to the latest. mddev->curr_resync_completed is a reliable indicator of the earliest position at which resync could be happening. It is updated less frequently, but is actually reliable which is more important. So use it to determine if a write request is before the region being resynced and so safe from conflict. This error can allow resync IO to interfere with normal IO which could lead to data corruption. Hence: stable. Fixes: 79ef3a8aSigned-off-by:
-
NeilBrown authored
commit 2f73d3c5 upstream. The resync/recovery process for raid1 was recently changed so that writes could happen in parallel with resync providing they were in different regions of the device. There is a problem though: While a write request will always wait for conflicting resync to complete, a resync request will *not* always wait for conflicting writes to complete. Two changes are needed to fix this: 1/ raise_barrier (which waits until it is safe to do resync) must wait until current_window_requests is zero 2/ wait_battier (which waits at the start of a new write request) must update current_window_requests if the request could possible conflict with a concurrent resync. As concurrent writes and resync can lead to data loss, this patch is suitable for -stable. Fixes: 79ef3a8a Cc: majianpeng <majianpeng@gmail.com> Signed-off-by:
-
NeilBrown authored
commit 669cc7ba upstream. If there are outstanding writes when close_sync is called, the change to ->start_next_window might cause them to decrement the wrong counter when they complete. Fix this by merging the two counters into the one that will be decremented. Having an incorrect value in a counter can cause raise_barrier() to hangs, so this is suitable for -stable. Fixes: 79ef3a8aSigned-off-by:
-
NeilBrown authored
commit c6d119cf upstream. commit 79ef3a8a made it possible for reads to happen concurrently with resync. This means that we need to be more careful where read_balancing is allowed during resync - we can no longer be sure that any resync that has already started will definitely finish. So keep read_balancing to before recovery_cp, which is conservative but safe. This bug makes it possible to read from a device that doesn't have up-to-date data, so it can cause data corruption. So it is suitable for any kernel since 3.11. Fixes: 79ef3a8aSigned-off-by:
-
NeilBrown authored
commit f0cc9a05 upstream. r1_bio->start_next_window is not initialised in the READ case, so allow_barrier may incorrectly decrement conf->current_window_requests which can cause raise_barrier() to block forever. Fixes: 79ef3a8aReported-by:
-
Hans Verkuil authored
commit 77639ff2 upstream. The log_status function should show HDMI information, but the test checking for an HDMI input was inverted. Fix this. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
