adm1272 supports temperature reporting but it is disabled by default.

Tested:
ls temp1_*
temp1_crit           temp1_highest        temp1_max
temp1_crit_alarm     temp1_input          temp1_max_alarm

cat temp1_input
26642
Signed-off-by: Chu Lin <linchuyuan@google.com>
Link: https://lore.kernel.org/r/20210512171043.2433694-1-linchuyuan@google.com
[groeck: Updated subject to reflect correct driver]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Monolithic Power Systems, Inc. (MPS) dual-loop, digital, multi-phase
controller.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210511055619.118104-4-vadimp@nvidia.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for mp2888 device from Monolithic Power Systems, Inc. (MPS)
vendor. This is a digital, multi-phase, pulse-width modulation
controller.

This device supports:
- One power rail.
- Programmable Multi-Phase up to 10 Phases.
- PWM-VID Interface
- One pages 0 for telemetry.
- Programmable pins for PMBus Address.
- Built-In EEPROM to Store Custom Configurations.
- Can configured VOUT readout in direct or VID format and allows
  setting of different formats on rails 1 and 2. For VID the following
  protocols are available: VR13 mode with 5-mV DAC; VR13 mode with
  10-mV DAC, IMVP9 mode with 5-mV DAC.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210511055619.118104-3-vadimp@nvidia.com
[groeck: Add MODULE_IMPORT_NS]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Increase maximum number of phases from 8 to 10 to support multi-phase
devices allowing up to 10 phases.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210511055619.118104-2-vadimp@nvidia.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.

Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210511091843.4561-1-thunder.leizhen@huawei.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for Flex BMR310, BMR456, BMR457, BMR458, BMR480, BMR490,
BMR491 and BMR492 to the pmbus driver
Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Link: https://lore.kernel.org/r/20210507194023.61138-4-erik.rosen@metormote.com
[groeck: Fixed minor whitespace error]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add documentation for the new pmbus flags PMBUS_WRITE_PROTECTED,
PMBUS_NO_CAPABILITY and PMBUS_READ_STATUS_AFTER_FAILED_CHECK
Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Link: https://lore.kernel.org/r/20210507194023.61138-3-erik.rosen@metormote.com
[groeck: Added newline at end of file]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Some PMBus chips end up in an undefined state when trying to read an
unsupported register. For such chips, it is necessary to reset the
chip pmbus controller to a known state after a failed register check.
This can be done by reading a known register. By setting this flag the
driver will try to read the STATUS register after each failed
register check. This read may fail, but it will put the chip into a
known state.
Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Link: https://lore.kernel.org/r/20210507194023.61138-2-erik.rosen@metormote.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Use platform_device_register_simple() instead of
manually calling platform_device_alloc()/platform_device_add().
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210508131457.12780-5-W_Armin@gmx.deReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use watchdog_set_nowayout() to process param
setting and change param type to bool.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210508131457.12780-4-W_Armin@gmx.deReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

strlcpy is considered deprecated.
Replace it with strscpy.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210508131457.12780-3-W_Armin@gmx.deReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use devm_kzalloc()/devm_watchdog_register() for
watchdog registration since it allows us to remove
the sch56xx_watchdog_data struct from the drivers
own data structs.
Remove sch56xx_watchdog_unregister since devres
takes care of that now.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210508131457.12780-2-W_Armin@gmx.deReviewed-by: Hans de Goede <hdegoede@redhat.com>
[groeck: Dropped unnecessary return; at end of void function]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use SPI_MODE_X_MASK instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210510141331.56736-1-andriy.shevchenko@linux.intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Valid Maxim Integrated ACPI device IDs would start with MXIM,
not with MAX1. On top of that, ACPI device IDs reflecting chip names
are almost always invalid.

Remove the invalid ACPI IDs.

Fixes: 04e1e70a ("hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This reverts commit b58bd4c6.

None of the ACPI IDs introduced with the reverted patch is a valid ACPI
device ID. Any ACPI users of this driver are advised to use PRP0001 and
a devicetree-compatible device identification.

Fixes: b58bd4c6 ("hwmon: (lm70) Add support for ACPI")
Cc: Andrej Picej <andpicej@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

While UTF-8 characters can be used at the Linux documentation,
the best is to use them only when ASCII doesn't offer a good replacement.
So, replace the occurences of the following UTF-8 characters:

	- U+2010 ('‐'): HYPHEN
	- U+2013 ('–'): EN DASH
	- U+2019 ('’'): RIGHT SINGLE QUOTATION MARK
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ccdd1bf45963a7748188a97c75f667b37bd43d2f.1620641727.git.mchehab+huawei@kernel.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.

Replace the occurences of the following characters:

	- U+2010 ('‐'): HYPHEN
	  as ASCII HYPHEN is preferred over U+2010
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ba8b5122ac9d4918fd966d0eb0a5ca9d89044b04.1621159997.git.mchehab+huawei@kernel.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Document the DT compatible for TI TMP1075 which
is a LM75 compatible sensor.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20210429121150.106804-2-robert.marko@sartura.hrAcked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

TI TMP1075 is a LM75 compatible sensor, so lets
add support for it.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20210429121150.106804-1-robert.marko@sartura.hrSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Update documentation for zl6100 driver and fix dead links to technical
specifications
Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Link: https://lore.kernel.org/r/20210423153329.33457-3-erik.rosen@metormote.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for Renesas ZL8802 Dual Channel/Dual Phase PMBus DC/DC
Digital Controller as well as ZLS1003 and ZLS4009 custom DC/DC
controller chips.
Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Link: https://lore.kernel.org/r/20210423153329.33457-2-erik.rosen@metormote.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The BPA-RS600 doesn't follow the PMBus spec for linear data.
Specifically it treats the mantissa as an unsigned 11-bit value instead
of a two's complement 11-bit value. At this point it's unclear whether
this only affects Vin or if Pin/Pout1 are affected as well. Erring on
the side of caution only Vin is dealt with here.

Fixes: 15b2703e ("hwmon: (pmbus) Add driver for BluTek BPA-RS600")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210616034218.25821-1-chris.packham@alliedtelesis.co.nzSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Merge tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Correct buffer copying when peeking events

 - Sync cpufeatures/disabled-features.h header with the kernel sources

* tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers cpufeatures: Sync with the kernel sources
  perf session: Correct buffer copying when peeking events

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:

   - Fix use-after-free in nfs4_init_client()

  Bugfixes:

   - Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()

   - Fix second deadlock in nfs4_evict_inode()

   - nfs4_proc_set_acl should not change the value of NFS_CAP_UIDGID_NOMAP

   - Fix setting of the NFS_CAP_SECURITY_LABEL capability"

* tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix second deadlock in nfs4_evict_inode()
  NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
  NFS: FMODE_READ and friends are C macros, not enum types
  NFS: Fix a potential NULL dereference in nfs_get_client()
  NFS: Fix use-after-free in nfs4_init_client()
  NFS: Ensure the NFS_CAP_SECURITY_LABEL capability is set when appropriate
  NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.

Pull SCSI fixes from James Bottomley:
 "Four reasonably small fixes to the core for scsi host allocation
  failure paths.

  The root problem is that we're not freeing the memory allocated by
  dev_set_name(), which involves a rejig of may of the free on error
  paths to do put_device() instead of kfree which, in turn, has several
  other knock on ramifications and inspection turned up a few other
  lurking bugs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Only put parent device if host state differs from SHOST_CREATED
  scsi: core: Put .shost_dev in failure path if host state changes to RUNNING
  scsi: core: Fix failure handling of scsi_add_host_with_dma()
  scsi: core: Fix error handling of scsi_host_alloc()

Pull RISC-V fixes from Palmer Dabbelt:

 - A pair of XIP fixes: one to fix alternatives, and one to turn off the
   rest of the features that require code modification

 - A fix to a type that was causing some alternatives to break

 - A build fix for BUILTIN_DTB

* tag 'riscv-for-linus-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix BUILTIN_DTB for sifive and microchip soc
  riscv: alternative: fix typo in macro name
  riscv: code patching only works on !XIP_KERNEL
  riscv: xip: support runtime trap patching

0day robot reported a 9.2% regression for will-it-scale mmap1 test
case[1], caused by commit 57efa1fe ("mm/gup: prevent gup_fast from
racing with COW during fork").

Further debug shows the regression is due to that commit changes the
offset of hot fields 'mmap_lock' inside structure 'mm_struct', thus some
cache alignment changes.

From the perf data, the contention for 'mmap_lock' is very severe and
takes around 95% cpu cycles, and it is a rw_semaphore

        struct rw_semaphore {
                atomic_long_t count;	/* 8 bytes */
                atomic_long_t owner;	/* 8 bytes */
                struct optimistic_spin_queue osq; /* spinner MCS lock */
                ...

Before commit 57efa1fe adds the 'write_protect_seq', it happens to
have a very optimal cache alignment layout, as Linus explained:

 "and before the addition of the 'write_protect_seq' field, the
  mmap_sem was at offset 120 in 'struct mm_struct'.

  Which meant that count and owner were in two different cachelines,
  and then when you have contention and spend time in
  rwsem_down_write_slowpath(), this is probably *exactly* the kind
  of layout you want.

  Because first the rwsem_write_trylock() will do a cmpxchg on the
  first cacheline (for the optimistic fast-path), and then in the
  case of contention, rwsem_down_write_slowpath() will just access
  the second cacheline.

  Which is probably just optimal for a load that spends a lot of
  time contended - new waiters touch that first cacheline, and then
  they queue themselves up on the second cacheline."

After the commit, the rw_semaphore is at offset 128, which means the
'count' and 'owner' fields are now in the same cacheline, and causes
more cache bouncing.

Currently there are 3 "#ifdef CONFIG_XXX" before 'mmap_lock' which will
affect its offset:

  CONFIG_MMU
  CONFIG_MEMBARRIER
  CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES

The layout above is on 64 bits system with 0day's default kernel config
(similar to RHEL-8.3's config), in which all these 3 options are 'y'.
And the layout can vary with different kernel configs.

Relayouting a structure is usually a double-edged sword, as sometimes it
can helps one case, but hurt other cases.  For this case, one solution
is, as the newly added 'write_protect_seq' is a 4 bytes long seqcount_t
(when CONFIG_DEBUG_LOCK_ALLOC=n), placing it into an existing 4 bytes
hole in 'mm_struct' will not change other fields' alignment, while
restoring the regression.

Link: https://lore.kernel.org/lkml/20210525031636.GB7744@xsang-OptiPlex-9020/ [1]
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull USB fixes from Greg KH:
 "Here are a number of tiny USB fixes for 5.13-rc6.

  There are more than I would normally like, but there's been a bunch of
  people banging on the gadget and dwc3 and typec code recently for I
  think an Android release, which has resulted in a number of small
  fixes. It's nice to see companies send fixes upstream for this type of
  work, a notable change from years ago.

  Anyway, fixes in here are:

   - usb-serial device id updates

   - usb-serial cp210x driver fixes for broken firmware versions

   - typec fixes for crazy charging devices and other reported problems

   - dwc3 fixes for reported problems found

   - gadget fixes for reported problems

   - tiny xhci fixes

   - other small fixes for reported issues.

   - revert of a problem fix found by linux-next testing

  All of these have passed 0-day and linux-next testing with no reported
  problems (the revert for the found linux-next build problem included)"

* tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits)
  Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs"
  usb: typec: mux: Fix copy-paste mistake in typec_mux_match
  usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path
  usb: gadget: fsl: Re-enable driver for ARM SoCs
  usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
  USB: serial: cp210x: fix CP2102N-A01 modem control
  USB: serial: cp210x: fix alternate function for CP2102N QFN20
  usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource()
  usb: dwc3: ep0: fix NULL pointer exception
  usb: gadget: eem: fix wrong eem header operation
  usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()
  usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
  usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()
  usb: typec: tcpm: Do not finish VDM AMS for retrying Responses
  usb: fix various gadget panics on 10gbps cabling
  usb: fix various gadgets null ptr deref on 10gbps cabling.
  usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
  usb: f_ncm: only first packet of aggregate needs to start timer
  USB: f_ncm: ncm_bitrate (speed) is unsigned
  MAINTAINERS: usb: add entry for isp1760
  ...

Pull serial driver fix from Greg KH:
 "A single 8250_exar serial driver fix for a reported problem with a
  change that happened in 5.13-rc1.

  It has been in linux-next with no reported problems"

* tag 'tty-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_exar: Avoid NULL pointer dereference at ->exit()

Pull staging driver fixes from Greg KH:
 "Two tiny staging driver fixes:

   - ralink-gdma driver authorship information fixed up

   - rtl8723bs driver fix for reported regression

  Both have been in linux-next for a while with no reported problems"

* tag 'staging-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ralink-gdma: Remove incorrect author information
  staging: rtl8723bs: Fix uninitialized variables

Merge tag 'driver-core-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "A single debugfs fix for 5.13-rc6, fixing a bug in
  debugfs_read_file_str() that showed up in 5.13-rc1.

  It has been in linux-next for a full week with no
  reported problems"

* tag 'driver-core-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  debugfs: Fix debugfs_read_file_str()

Pull char/misc driver fixes from Greg KH:
 "Here are some small misc driver fixes for 5.13-rc6 that fix some
  reported problems:

   - Tiny phy driver fixes for reported issues

   - rtsx regression for when the device suspended

   - mhi driver fix for a use-after-free

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG
  bus: mhi: pci-generic: Fix hibernation
  bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()
  bus: mhi: pci_generic: T99W175: update channel name from AT to DUN
  phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()
  phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable
  phy: ti: Fix an error code in wiz_probe()
  phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
  phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()
  phy: usb: Fix misuse of IS_ENABLED

Pull pin control fixes from Linus Walleij:

 - Fix some documentation warnings for Allwinner

 - Fix duplicated GPIO groups on Qualcomm SDX55

 - Fix a double enablement bug in the Ralink driver

 - Fix the Qualcomm SC8180x Kconfig so the driver can be selected.

* tag 'pinctrl-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Make it possible to select SC8180x TLMM
  pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabled
  pinctrl: qcom: Fix duplication in gpio_groups
  pinctrl: aspeed: Fix minor documentation error

Pull block fixes from Jens Axboe:
 "A few fixes that should go into 5.13:

   - Fix a regression deadlock introduced in this release between open
     and remove of a bdev (Christoph)

   - Fix an async_xor md regression in this release (Xiao)

   - Fix bcache oversized read issue (Coly)"

* tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
  block: loop: fix deadlock between open and remove
  async_xor: check src_offs is not NULL before updating it
  bcache: avoid oversized read request in cache missing code path
  bcache: remove bcache device self-defined readahead

Pull io_uring fixes from Jens Axboe:
 "Just an API change for the registration changes that went into this
  release. Better to get it sorted out now than before it's too late"

* tag 'io_uring-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
  io_uring: add feature flag for rsrc tags
  io_uring: change registration/upd/rsrc tagging ABI

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes:

   - Fix performance regression caused by lack of intended batching of
     RCU callbacks by over-eager NOHZ-full code.

   - Fix cgroups related corruption of load_avg and load_sum metrics.

   - Three fixes to fix blocked load, util_sum/runnable_sum and util_est
     tracking bugs"

* tag 'sched-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix util_est UTIL_AVG_UNCHANGED handling
  sched/pelt: Ensure that *_sum is always synced with *_avg
  tick/nohz: Only check for RCU deferred wakeup on user/guest entry when needed
  sched/fair: Make sure to update tg contrib for blocked load
  sched/fair: Keep load_avg and load_sum synced

Pull perf fixes from Ingo Molnar:
 "Misc fixes:

   - Fix the NMI watchdog on ancient Intel CPUs

   - Remove a misguided, NMI-unsafe KASAN callback from the NMI-safe
     irq_work path used by perf.

   - Fix uncore events on Ice Lake servers.

   - Someone booted maxcpus=1 on an SNB-EP, and the uncore driver
     emitted warnings and was probably buggy. Fix it.

   - KCSAN found a genuine data race in the core perf code. Somewhat
     ironically the bug was introduced through a recent race fix. :-/
     In our defense, the new race window was much more narrow. Fix it"

* tag 'perf-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi_watchdog: Fix old-style NMI watchdog regression on old Intel CPUs
  irq_work: Make irq_work_queue() NMI-safe again
  perf/x86/intel/uncore: Fix M2M event umask for Ice Lake server
  perf/x86/intel/uncore: Fix a kernel WARNING triggered by maxcpus=1
  perf: Fix data race between pin_count increment/decrement

Pull objtool fixes from Ingo Molnar:
 "Two objtool fixes:

   - fix a bug that corrupts the code by mistakenly rewriting
     conditional jumps

   - fix another bug generating an incorrect ELF symbol table
     during retpoline rewriting"

* tag 'objtool-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Only rewrite unconditional retpoline thunk calls
  objtool: Fix .symtab_shndx handling for elf_create_undef_symbol()

Fix BUILTIN_DTB config which resulted in a dtb that was actually not
built into the Linux image: in the same manner as Canaan soc does,
create an object file from the dtb file that will get linked into the
Linux image.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>