- 01 May, 2019 6 commits
-
-
Keith Busch authored
We do not restart a controller in a deleting state for timeout errors. When in this state, unblock potential request dispatchers with failed completions by shutting down the controller on timeout detection. Reported-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Klaus Birkelund Jensen authored
The shortcut for single segment SGL requests did not set the PSDT field to mark the request as using SGLs. Fixes: 29791057 ("nvme-pci: optimize mapping single segment requests using SGLs") Signed-off-by:
Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com> Signed-off-by:
-
Hannes Reinecke authored
Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Hannes Reinecke authored
If the bio is moved to a different queue via blk_steal_bios() and the original queue is destroyed in nvme_remove_ns() we'll be ending with a crash in bio_endio() as the mempool for the split bio bvecs had already been destroyed. So split the bio using the original queue (which will remain during the lifetime of the bio) before sending it down to the underlying device. Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Sagi Grimberg authored
If I/O queue connect times out, we might have freed the queue socket already, so check for that on the error path in nvme_tcp_start_queue. Signed-off-by:
-
Jens Axboe authored
It's not used outside this file. Fixes: 63120731 ("bcache: fix failure in journal relplay") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 30 Apr, 2019 12 commits
-
-
Christoph Hellwig authored
Reviewed-by:
-
Christoph Hellwig authored
Various block layer files do not have any licensing information at all. Add SPDX tags for the default kernel GPLv2 license to those. Reviewed-by:
-
Christoph Hellwig authored
This file has no copyright notice, but was added as part of a commit adding another file using the default kernel GPLv2 license. Add a matching SPDX tag. Reviewed-by:
-
Christoph Hellwig authored
The file already has the correct SPDX header. Reviewed-by:
-
Christoph Hellwig authored
All these files have some form of the usual GPLv2 or later boilerplate. Switch them to use SPDX tags instead. Reviewed-by:
-
Christoph Hellwig authored
All these files have some form of the usual GPLv2 boilerplate. Switch them to use SPDX tags instead. Reviewed-by:
-
Christoph Hellwig authored
Share the bi_size update by moving the done label up, and duplicate the bv_len update in the two callers to get rid of the bvec_merge label. Signed-off-by:
-
Christoph Hellwig authored
We are never called with file system pages by defintions for the passthrough interface, and we also never undo any addition later these days. Signed-off-by:
-
Christoph Hellwig authored
The same page optimization is a rather odd corner case, which is not used outside bio.c and which really should not be used outside of bio.c either - we have better highlevel helpers like the rq/bio mapping helpers. Signed-off-by:
-
Christoph Hellwig authored
We only have two callers that need the integer loop iterator, and they can easily maintain it themselves. Suggested-by:
Matthew Wilcox <willy@infradead.org> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
David Sterba <dsterba@suse.com> Reviewed-by:
Coly Li <colyli@suse.de> Reviewed-by:
-
Christoph Hellwig authored
Use a variable containing the buffer address instead of the to be removed integer iterator from bio_for_each_segment_all. Suggested-by:
-
Coly Li authored
Commit 95f18c9d ("bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set") forgets to remove the original define of LIST_HEAD(journal), which makes the change no take effect. This patch removes redundant variable LIST_HEAD(journal) from run_cache_set(), to make Shenghui's fix working. Fixes: 95f18c9d ("bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set") Reported-by:
Juha Aatrokoski <juha.aatrokoski@aalto.fi> Cc: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by:
-
- 26 Apr, 2019 1 commit
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe changes from Christoph. * 'nvme-5.2' of git://git.infradead.org/nvme: nvme: set 0 capacity if namespace block size exceeds PAGE_SIZE nvme-rdma: fix typo in struct comment nvme-loop: kill timeout handler nvme-tcp: rename function to have nvme_tcp prefix nvme-rdma: fix a NULL deref when an admin connect times out nvme-tcp: fix a NULL deref when an admin connect times out nvmet-tcp: don't fail maxr2t greater than 1 nvmet-file: clamp-down file namespace lba_shift nvmet: include <linux/scatterlist.h> nvmet: return a specified error it subsys_alloc fails nvmet: rename nvme_completion instances from rsp to cqe nvmet-rdma: remove p2p_client initialization from fast-path
-
- 25 Apr, 2019 13 commits
-
-
Christoph Hellwig authored
The trim support in mtip32xx has been "temporarily" disabled for 6 years, which is 3/4 of the time the driver even exists in the tree. Remove it as it obviously is dead code now. Signed-off-by:
-
Sagi Grimberg authored
If our target exposed a namespace with a block size that is greater than PAGE_SIZE, set 0 capacity on the namespace as we do not support it. This issue encountered when the nvmet namespace was backed by a tempfile. Signed-off-by:
-
Minwoo Im authored
struct nvme_rdma_cm_rej has two different attributes: recfmt and sts. And sts will have value what this comment wanted to show. Signed-off-by:
Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by:
-
Ming Lei authored
Firstly it doesn't make sense to handle timeout for loop: 1) for admin queue, the request is always completed in code path of queuing IO. 2) for normal IO request, the timeout on these IOs have been handled by underlying queue already. Secondly nvme-loop's timeout handler is simply broken, and easy to cause issue: 1) no any sync/protection between timeout and normal completion, and now it is driver's responsibility to deal with that; 2) bad reset implementation, blk_mq_update_nr_hw_queues() is called after all NSs's queue is stopped(quiesced), and easy to trigger deadlock. So kill the timeout handler. Signed-off-by:
-
Sagi Grimberg authored
usually nvme_ prefix is for core functions. While we're cleaning up, remove redundant empty lines Signed-off-by:
Minwoo Im <minwoo.im@samsung.com> Signed-off-by:
-
Sagi Grimberg authored
If we timeout the admin startup sequence we might not yet have an I/O tagset allocated which causes the teardown sequence to crash. Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags if the tagset wasn't allocated. Fixes: 4c174e63 ("nvme-rdma: fix timeout handler") Signed-off-by:
-
Sagi Grimberg authored
If we timeout the admin startup sequence we might not yet have an I/O tagset allocated which causes the teardown sequence to crash. Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags if the tagset wasn't allocated. Fixes: 39d57757 ("nvme-tcp: fix timeout handler") Signed-off-by:
-
Sagi Grimberg authored
The host may support it, but nothing prevents us from sending a single r2t at a time like we do anyways. Signed-off-by:
-
Sagi Grimberg authored
When the backing file is a tempfile for example, the inode i_blkbits can be 1M in size which causes problems for hosts to support as the disk block size. Instead, expose the minimum between i_blkbits and 12 (4K sector size). Signed-off-by:
-
Enrico Weigelt, metux IT consult authored
Build breaks: drivers/nvme/target/core.c: In function 'nvmet_req_alloc_sgl': drivers/nvme/target/core.c:939:12: error: implicit declaration of \ function 'sgl_alloc'; did you mean 'bio_alloc'? \ [-Werror=implicit-function-declaration] req->sg = sgl_alloc(req->transfer_len, GFP_KERNEL, &req->sg_cnt); ^~~~~~~~~ bio_alloc drivers/nvme/target/core.c:939:10: warning: assignment makes pointer \ from integer without a cast [-Wint-conversion] req->sg = sgl_alloc(req->transfer_len, GFP_KERNEL, &req->sg_cnt); ^ drivers/nvme/target/core.c: In function 'nvmet_req_free_sgl': drivers/nvme/target/core.c:952:3: error: implicit declaration of \ function 'sgl_free'; did you mean 'ida_free'? [-Werror=implicit-function-declaration] sgl_free(req->sg); ^~~~~~~~ ida_free Cause: 1. missing include to <linux/scatterlist.h> 2. SGL_ALLOC needs to be enabled Therefore adding the missing include, as well as Kconfig dependency. Signed-off-by:Enrico Weigelt, metux IT consult <info@metux.net> Reviewed-by:
-
Minwoo Im authored
nvmet_subsys_alloc() returns its pointer or NULL if it fails. We can see three different steps in this function: 1. memory allocation 2. argument check 3. memory allocation for string But now the callers of this function do not seem to handle case 2 by returning -ENOMEM only even if it fails with an invalid parameter. This patch specifies error codes so that caller can pass it to its own caller. Signed-off-by:
-
Max Gurtovoy authored
Use NVMe namings for improving code readability. Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
Max Gurtovoy authored
Initialize it during command allocation. Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Stephen Bates <sbates@raithlin.com> Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
-
- 24 Apr, 2019 8 commits
-
-
Shenghui Wang authored
bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set In the CACHE_SYNC branch of run_cache_set(), LIST_HEAD(journal) is used to collect journal_replay(s) and filled by bch_journal_read(). If all goes well, bch_journal_replay() will release the list of jounal_replay(s) at the end of the branch. If something goes wrong, code flow will jump to the label "err:" and leave the list unreleased. This patch will release the list of journal_replay(s) in the case of error detected. v1 -> v2: * Move the release code to the location after label 'err:' to simply the change. Signed-off-by:
Shenghui Wang <shhuiw@foxmail.com> Signed-off-by:
-
Shenghui Wang authored
Elements of keylist should be accessed before the list is freed. Move bch_keylist_free() calling after the while loop to avoid wrong content accessed. Signed-off-by:
-
Tang Junhui authored
journal replay failed with messages: Sep 10 19:10:43 ceph kernel: bcache: error on bb379a64-e44e-4812-b91d-a5599871a3b1: bcache: journal entries 2057493-2057567 missing! (replaying 2057493-20766016), disabling caching The reason is in journal_reclaim(), when discard is enabled, we send discard command and reclaim those journal buckets whose seq is old than the last_seq_now, but before we write a journal with last_seq_now, the machine is restarted, so the journal with the last_seq_now is not written to the journal bucket, and the last_seq_wrote in the newest journal is old than last_seq_now which we expect to be, so when we doing replay, journals from last_seq_wrote to last_seq_now are missing. It's hard to write a journal immediately after journal_reclaim(), and it harmless if those missed journal are caused by discarding since those journals are already wrote to btree node. So, if miss seqs are started from the beginning journal, we treat it as normal, and only print a message to show the miss journal, and point out it maybe caused by discarding. Patch v2 add a judgement condition to ignore the missed journal only when discard enabled as Coly suggested. (Coly Li: rebase the patch with other changes in bch_journal_replay()) Signed-off-by:
Tang Junhui <tang.junhui.linux@gmail.com> Tested-by:
Dennis Schridde <devurandom@gmx.net> Signed-off-by:
-
Coly Li authored
This patch tries to release mutex bch_register_lock early, to give chance to stop cache set and bcache device early. This patch also expends time out of stopping all bcache device from 2 seconds to 10 seconds, because stopping writeback rate update worker may delay for 5 seconds, 2 seconds is not enough. After this patch applied, stopping bcache devices during system reboot or shutdown is very hard to be observed any more. Signed-off-by:
-
Coly Li authored
Add code comments to explain which call back function might be called for the closure_queue(). This is an effort to make code to be more understandable for readers. Signed-off-by:
-
Coly Li authored
Add comments to explain why in register_bcache() blkdev_put() won't be called in two location. Add comments to explain why blkdev_put() must be called in register_cache() when cache_alloc() failed. Signed-off-by:
-
Coly Li authored
This patch adds return value to register_bdev(). Then if failure happens inside register_bdev(), its caller register_bcache() may detect and handle the failure more properly. Signed-off-by:
-
Coly Li authored
When failure happens inside bch_journal_replay(), calling cache_set_err_on() and handling the failure in async way is not a good idea. Because after bch_journal_replay() returns, registering code will continue to execute following steps, and unregistering code triggered by cache_set_err_on() is running in same time. First it is unnecessary to handle failure and unregister cache set in an async way, second there might be potential race condition to run register and unregister code for same cache set. So in this patch, if failure happens in bch_journal_replay(), we don't call cache_set_err_on(), and just print out the same error message to kernel message buffer, then return -EIO immediately caller. Then caller can detect such failure and handle it in synchrnozied way. Signed-off-by:
-
