- 02 Dec, 2019 14 commits
-
-
Bhawanpreet Lakha authored
load the ta firmware for navi10/12/14. This is already being done for raven/picasso and is needed for supporting hdcp on navi Signed-off-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Yintian Tao authored
When load amdgpu failed before create pm_sysfs and ucode_sysfs, the pm_sysfs and ucode_sysfs should not be removed. Otherwise, there will be warning call trace just like below. [ 24.836386] [drm] VCE initialized successfully. [ 24.841352] amdgpu 0000:00:07.0: amdgpu_device_ip_init failed [ 25.370383] amdgpu 0000:00:07.0: Fatal error during GPU init [ 25.889575] [drm] amdgpu: finishing device. [ 26.069128] amdgpu 0000:00:07.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_2.1.0 test failed (-110) [ 26.070110] [drm:gfx_v9_0_hw_fini [amdgpu]] *ERROR* KCQ disable failed [ 26.200309] [TTM] Finalizing pool allocator [ 26.200314] [TTM] Finalizing DMA pool allocator [ 26.200349] [TTM] Zone kernel: Used memory at exit: 0 KiB [ 26.200351] [TTM] Zone dma32: Used memory at exit: 0 KiB [ 26.200353] [drm] amdgpu: ttm finalized [ 26.205329] ------------[ cut here ]------------ [ 26.205330] sysfs group 'fw_version' not found for kobject '0000:00:07.0' [ 26.205347] WARNING: CPU: 0 PID: 1228 at fs/sysfs/group.c:256 sysfs_remove_group+0x80/0x90 [ 26.205348] Modules linked in: amdgpu(OE+) gpu_sched(OE) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache binfmt_misc snd_hda_codec_generic ledtrig_audio crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hda_core snd_hwdep snd_pcm snd_timer input_leds snd joydev soundcore serio_raw pcspkr evbug aesni_intel aes_x86_64 crypto_simd cryptd mac_hid glue_helper sunrpc ip_tables x_tables autofs4 8139too psmouse 8139cp mii i2c_piix4 pata_acpi floppy [ 26.205369] CPU: 0 PID: 1228 Comm: modprobe Tainted: G OE 5.2.0-rc1 #1 [ 26.205370] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 26.205372] RIP: 0010:sysfs_remove_group+0x80/0x90 [ 26.205374] Code: e8 35 b9 ff ff 5b 41 5c 41 5d 5d c3 48 89 df e8 f6 b5 ff ff eb c6 49 8b 55 00 49 8b 34 24 48 c7 c7 48 7a 70 98 e8 60 63 d3 ff <0f> 0b eb d7 66 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 [ 26.205375] RSP: 0018:ffffbee242b0b908 EFLAGS: 00010282 [ 26.205376] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 [ 26.205377] RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff97ad6f817380 [ 26.205377] RBP: ffffbee242b0b920 R08: ffffffff98f520c4 R09: 00000000000002b3 [ 26.205378] R10: ffffbee242b0b8f8 R11: 00000000000002b3 R12: ffffffffc0e58240 [ 26.205379] R13: ffff97ad6d1fe0b0 R14: ffff97ad4db954c8 R15: ffff97ad4db7fff0 [ 26.205380] FS: 00007ff3d8a1c4c0(0000) GS:ffff97ad6f800000(0000) knlGS:0000000000000000 [ 26.205381] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.205381] CR2: 00007f9b2ef1df04 CR3: 000000042aab8001 CR4: 00000000003606f0 [ 26.205384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 26.205385] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 26.205385] Call Trace: [ 26.205461] amdgpu_ucode_sysfs_fini+0x18/0x20 [amdgpu] [ 26.205518] amdgpu_device_fini+0x3b4/0x560 [amdgpu] [ 26.205573] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [ 26.205623] amdgpu_driver_load_kms+0xcd/0x250 [amdgpu] [ 26.205637] drm_dev_register+0x12b/0x1c0 [drm] [ 26.205695] amdgpu_pci_probe+0x12a/0x1e0 [amdgpu] [ 26.205699] local_pci_probe+0x47/0xa0 [ 26.205701] pci_device_probe+0x106/0x1b0 [ 26.205704] really_probe+0x21a/0x3f0 [ 26.205706] driver_probe_device+0x11c/0x140 [ 26.205707] device_driver_attach+0x58/0x60 [ 26.205709] __driver_attach+0xc3/0x140 Signed-off-by:
Yintian Tao <yttao@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Nirmoy Das <nirmoy.das@amd.com> Signed-off-by:
-
Monk Liu authored
still need to init csb even for SRIOV v2: drop init_pg() for gfx10 at all since PG and GFX off feature will be fully controled by RLC and SMU fw for gfx10 v3: drop the flush_gpu_tlb lines since we consider it is only usefull in emulation Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Monk Liu authored
To align with the scheme from gfx9 disabling GFX ring after VM shutdown could avoid garbage data be fetched to GFX RB which may lead to unnecessary screw up on GFX Signed-off-by:
-
Monk Liu authored
since we don't have RLCG ucode loading and no SRlist as well Signed-off-by:
-
Monk Liu authored
Signed-off-by:
-
Monk Liu authored
issue: kernel would report a warning from a double unpin during the driver unloading on the CSB bo why: we unpin it during hw_fini, and there will be another unpin in sw_fini on CSB bo. fix: actually we don't need to pin/unpin it during hw_init/fini since it is created with kernel pinned, we only need to fullfill the CSB again during hw_init to prevent CSB/VRAM lost after S3 v2: get_csb in init_rlc so hw_init() will make CSIB content back even after reset or s3 v3: use bo_create_kernel instead of bo_create_reserved for CSB otherwise the bo_free_kernel() on CSB is not aligned and would lead to its internal reserve pending there forever take care of gfx7/8 as well Signed-off-by:
Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by:
-
Harry Wentland authored
We don't use this upstream in the Linux kernel. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Zhan Liu authored
[Why] "num_vmid" and "num_dsc" are missing within NV14's resource caps structure. [How] Add the missing parts. Signed-off-by:
Zhan Liu <zhan.liu@amd.com> Reviewed-by:
-
Monk Liu authored
otherwse the flush_gpu_tlb will hang if we unload the KMD becuase the schedulers already stopped Signed-off-by:
-
James Zhu authored
For Arcturus, increase dispatch packet number to stress scheduler. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
-
James Zhu authored
Clear SDMA and HDP EDC counter in GPR workarounds. Signed-off-by:
-
Xiaojie Yuan authored
Signed-off-by:
-
Xiaojie Yuan authored
srbm_mutex is to guarantee atomicity for r/w of gfx indexed registers Signed-off-by:
-
- 26 Nov, 2019 18 commits
-
-
Jules Irenge authored
Replace 0 with NULL to fix sparse tool warning warning: Using plain integer as NULL pointer Acked-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Dan Carpenter authored
Originally the last WREG32_SOC15() was a part of the if statement block but the curly braces are on the wrong line. Fixes: bb0db70f ("drm/amdgpu: separate JPEG1.0 code out from VCN1.0") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alex Deucher authored
VI/CIK BACO was inflight when this fix landed for SOC15/NV. Add the fix to VI/CIK as well. Acked-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
Alex Deucher authored
The documentation says the that PCI core handles this for you unless you choose to implement it. Just rely on the PCI core to handle the pci specific bits. Reviewed-by:
-
Zhan liu authored
[Why] This line of code was modified. However, comments remained unchanged. As a result, comments and code are mismatching. [How] Modifying comments to reflect code. At the same time, explaining why the value was changed from 200ms to 3000ms. Signed-off-by:
-
Hawking Zhang authored
gfx memory should be initialized before enabling DED and FUE field in mmGB_EDC_MODE Signed-off-by:
-
Jack Zhang authored
Currently ARCTURUS VF doesn't support jpeg ip block. Skip jpeg ip block in case guest driver load fail. Signed-off-by:
Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by:
Zhexi Zhang <zhexi.zhang@amd.com> Signed-off-by:
-
Felix Kuehling authored
Be less pessimistic about estimated page table use for KFD. Most allocations use 2MB pages and therefore need less VRAM for page tables. This allows more VRAM to be used for applications especially on large systems with many GPUs and hundreds of GB of system memory. Example: 8 GPUs with 32GB VRAM each + 256GB system memory = 512GB Old page table reservation per GPU: 1GB New page table reservation per GPU: 32MB Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
xinhui pan <xinhui.pan@amd.com> Signed-off-by:
-
Felix Kuehling authored
Allow KFD applications to use more unpinned system memory through HMM. Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] previously event_property_validate was only called after we enabled the display. But after "Refactor HDCP to handle multiple displays per link" this function can be called at any time. In certain cases we don't have a aconnector [How] Null check aconnector and exit early. This is ok because we only need to check the ENABLED->DESIRED transition if a connector exists. Fixes: b1abe558 ("drm/amd/display: Refactor HDCP to handle multiple displays per link") Signed-off-by:
-
YueHaibing authored
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c: In function vegam_populate_clock_stretcher_data_table: drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vegam_smumgr.c:1489:29: warning: variable stretch_amount2 set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_psp.c: In function mod_hdcp_hdcp2_enable_encryption: drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_psp.c:633:77: warning: variable msg_out set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_psp.c: In function mod_hdcp_hdcp2_enable_dp_stream_encryption: drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_psp.c:710:77: warning: variable msg_out set but not used [-Wunused-but-set-variable] It is never used, so remove it. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
-
Timothy Pearson authored
KFD has been verified to function on POWER systems (Talos II / Vega 64). It should be available as a kernel configuration option on these systems. Signed-off-by:
Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nathan Chancellor authored
Commit b0f3cd31 ("drm/amdgpu: remove unnecessary JPEG2.0 code from VCN2.0") introduced a new clang warning in the vcn_v2_0_stop function: ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: warning: variable 'r' is used uninitialized whenever 'while' loop exits because its condition is false [-Wsometimes-uninitialized] SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note: expanded from macro 'SOC15_WAIT_ON_RREG' while ((tmp_ & (mask)) != (expected_value)) { \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1083:6: note: uninitialized use occurs here if (r) ^ ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: note: remove the condition if it is always true SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r); ^ ../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note: expanded from macro 'SOC15_WAIT_ON_RREG' while ((tmp_ & (mask)) != (expected_value)) { \ ^ ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1072:7: note: initialize the variable 'r' to silence this warning int r; ^ = 0 1 warning generated. To prevent warnings like this from happening in the future, make the SOC15_WAIT_ON_RREG macro initialize its ret variable before the while loop that can time out. This macro's return value is always checked so it should set ret in both the success and fail path. Link: https://github.com/ClangBuiltLinux/linux/issues/776Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns: ../drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:1965:26: warning: expression which evaluates to zero treated as a null pointer constant of type 'struct dc_dsc_config *' [-Wnon-literal-null-conversion] update->dsc_config = false; ^~~~~ ../drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:1971:25: warning: expression which evaluates to zero treated as a null pointer constant of type 'struct dc_dsc_config *' [-Wnon-literal-null-conversion] update->dsc_config = false; ^~~~~ 2 warnings generated. Fixes: f6fe4053 ("drm/amd/display: Use a temporary copy of the current state when updating DSC config") Link: https://github.com/ClangBuiltLinux/linux/issues/777Reviewed-by: -
Colin Ian King authored
The variables HiSidd and LoSidd are being initialized with values that are never read and are being updated a little later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Alex Deucher authored
No longer works on the driver. Reviewed-by:
-
- 25 Nov, 2019 3 commits
-
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
John Clements authored
Updated target I2C address Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Oak Zeng authored
Config the translation retry behavior according to noretry kernel parameter Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Suggested-by:
Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by:
-
- 22 Nov, 2019 5 commits
-
-
Alex Deucher authored
dm_pp_get_clock_levels_by_type needs to add the default clocks to the powerplay case as well. This was accidently dropped. Fixes: b3ea88fe ("drm/amd/powerplay: add get_clock_by_type interface for display") Bug: https://gitlab.freedesktop.org/drm/amd/issues/906Reviewed-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/amdgpu/psp_v3_1.c:182:40-41: WARNING: Use ARRAY_SIZE Reported-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:4946:28-29: WARNING: Use ARRAY_SIZE Reported-by:
-
Yong Zhao authored
The functions are the same as update_mqd(). Signed-off-by:
-
changzhu authored
It may lose gpuvm invalidate acknowldege state across power-gating off cycle. To avoid this issue in gmc9/gmc10 invalidation, add semaphore acquire before invalidation and semaphore release after invalidation. After adding semaphore acquire before invalidation, the semaphore register become read-only if another process try to acquire semaphore. Then it will not be able to release this semaphore. Then it may cause deadlock problem. If this deadlock problem happens, it needs a semaphore firmware fix. Signed-off-by:
changzhu <Changfeng.Zhu@amd.com> Acked-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
