- 09 Aug, 2017 40 commits
-
-
Daniel Scheller authored
As of 0.9.9b, the ddbridge code has been split from one single file (ddbridge-core.c) into multiple files, with the purpose of taking care of different topics, and to be able to reuse code in different kernel modules (ddbridge.ko and octonet.ko). This applies the same code split, with a notable difference: In the vendor package, the split was done by moving all code parts into separate files, and in the "main" code files (ddbridge.c and octonet.c), a simple "#include ddbridge-core.c" was done. In this patch, the same split (codewise) is done, but all resulting .c/.o files will be handled by the makefile, with proper prototyping of all shared functions done in ddbridge.h. To avoid conflicts wrt the global space, the I2C functions and necessary prototypes for ddbridge-i2c.c are moved into ddbridge-i2c.h, which is to be included wherever required. Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Tested-by:
Richard Scobie <r.scobie@clear.net.nz> Tested-by:
Jasmin Jessich <jasmin@anw.at> Tested-by:
Dietmar Spingler <d_spingler@freenet.de> Tested-by:
Manfred Knick <Manfred.Knick@t-online.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Daniel Scheller authored
The functions in ddbridge-core.c have been moved to different positions in newer versions of the dddvb vendor driver package (most notably in version 0.9.9b). Perform the same code move to keep the diff of the upcoming code bump simpler. Signed-off-by:
-
Julia Lawall authored
The structure vs6624_default_fmt is only copied into another structure field, so it can be const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Chiranjeevi Rapolu authored
Previously, possible digital gains were just 1x, 2x and 4x. These coarse gains were not sufficient in fine-tuning the image capture. Now, digital gain range is [0, 16x] with each step 1/1024, default 1x. This is achieved through OV13858 MWB R/G/B gain controls. Signed-off-by:
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by:
-
Chiranjeevi Rapolu authored
Previously both link-frequency and pixel-rate reported by the sensor was incorrect, resulting in incorrect FPS. Report link-frequency in Hz rather than link data rate in bps. Calculate pixel-rate from link-frequency. Signed-off-by:
-
Chiranjeevi Rapolu authored
Previously, initial exposure max was set incorrectly to (0x7fff - 8). Now, limit exposure max to current resolution (VTS - 8). Signed-off-by:
-
Chiranjeevi Rapolu authored
On format change, sometimes, sensor was streaming at a much higher FPS than the default. This was resulting in various problems like frame drops/corruption. Upon format change, set default vblank as current vblank. This will ensure that sensor will start streaming at default fps. Signed-off-by:
-
Peter Rosin authored
This prevents potentially scary debug messages from the i2c core. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Julia Lawall authored
These structures are both stored in fields of v4l2_subdev_ops structures, all of which are const, so these structures can be const as well. Done with the help of Coccinelle. Signed-off-by:
-
Stephen Brennan authored
Signed-off-by:
Stephen Brennan <stephen@brennan.io> Signed-off-by:
-
Rene Hickersberger authored
Fixed a brace coding style issue. Signed-off-by:
Rene Hickersberger <renehickersberger@gmx.net> Signed-off-by:
-
Julia Lawall authored
These videobuf_queue_ops structures are only passed as the second argument to videobuf_queue_vmalloc_init, which is declared as const. Thus the videobuf_queue_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct videobuf_queue_ops i@p = { ... }; @ok1@ identifier r.i; expression e1; position p; @@ videobuf_queue_vmalloc_init(e1,&i@p,...) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct videobuf_queue_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct videobuf_queue_ops i = { ... }; // </smpl> Signed-off-by: -
Geliang Tang authored
Use kvmalloc()/kvzalloc() instead of atomisp_kernel_malloc() /atomisp_kernel_zalloc(). Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Add entry to the MAINTAINERS file for the meson ao cec driver. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
The Amlogic SoC embeds a standalone CEC controller, this patch adds a driver for such controller. The controller does not need HPD to be active, and could support up to max 5 logical addresses, but only 1 is handled since the Suspend firmware can make use of this unique logical address to wake up the device. The Suspend firmware configuration will be added in an other patchset. Signed-off-by:
-
Neil Armstrong authored
The Amlogic SoCs embeds a standalone CEC Controller, this patch adds this device bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Daniel Mentz authored
Certain syscalls like recvmmsg support 64 bit timespec values for the X32 ABI. The helper function compat_put_timespec converts a timespec value to a 32 bit or 64 bit value depending on what ABI is used. The v4l2 compat layer, however, is not designed to support 64 bit timespec values and always uses 32 bit values. Hence, compat_put_timespec must not be used. Without this patch, user space will be provided with bad timestamp values from the VIDIOC_DQEVENT ioctl. Also, fields of the struct v4l2_event32 that come immediately after timestamp get overwritten, namely the field named id. Fixes: 81993e81 ("compat: Get rid of (get|put)_compat_time(val|spec)") Cc: stable@vger.kernel.org Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Tiffany Lin <tiffany.lin@mediatek.com> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Daniel Mentz <danielmentz@google.com> Signed-off-by:
-
Daniel Mentz authored
Commit b2787845 ("V4L/DVB (5289): Add support for video output overlays.") added the field global_alpha to struct v4l2_window but did not update the compat layer accordingly. This change adds global_alpha to struct v4l2_window32 and copies the value for global_alpha back and forth. Signed-off-by:
-
Dan Carpenter authored
These can only be accessed with CAP_SYS_ADMIN so it's not a critical security issue. The problem is that "page" is controlled by the user in the ioctl(). The test to see if the bit is set in state->info->page_mask is not sufficient because "page" can be very high and shift wrap around to a bit which is set. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Julia Lawall authored
vpbe_dev_ops is only copied into the ops field at the end of a vpbe_device structure, so it can be const. Signed-off-by:
-
Anton Sviridenko authored
24 GPIO pins from 32 available on solo6x10 chips are exported to gpiolib. First 8 GPIOs are reserved for internal use on capture card boards, GPIOs in range 8:15 are configured as outputs to control relays, remaining 16:31 are configured as inputs to read sensor states. Now with this patch userspace DVR software can switch relays and read sensor states when GPIO extension cards are attached to Softlogic solo6x10 based video capture cards. Signed-off-by:
Anton Sviridenko <anton@corp.bluecherry.net> Signed-off-by:
Ismael Luceno <ismael@iodev.co.uk> Signed-off-by:
-
Peter Rosin authored
No one cares anyway. Signed-off-by:
-
Peter Rosin authored
While at it, change the type of the previously always-zero i2c_rc member to int, matching the returned type from i2c_add_adapter. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. So making 'pci_tbl' as const member of 'struct saa7146_extension'. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
