- 09 May, 2007 24 commits
-
-
Christoph Lameter authored
We needlessly duplicate code. Also make check_valid_pointer inline. Signed-off-by: Christoph LAemter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Lameter authored
-e Show empty slabs -d Modification of slab debug options at runtime -o Operations. Display of ctor / dtor etc. -r Report: Display all available information about a slabcache. Cleanup tracking display and make it work right. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Lameter authored
If no redzoning is selected then we do not need padding before the next object. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Lameter authored
SLUB currently assumes that the cacheline size is static. However, i386 f.e. supports dynamic cache line size determination. Use cache_line_size() instead of L1_CACHE_BYTES in the allocator. That also explains the purpose of SLAB_HWCACHE_ALIGN. So we will need to keep that one around to allow dynamic aligning of objects depending on boot determination of the cache line size. [akpm@linux-foundation.org: need to define it before we use it] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Rothwell authored
This is needed before Powerpc can wire up the syscall. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Cc: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
H. Peter Anvin authored
In the process of rewriting the x86 setup code, I found a number of inaccuracies and outdated recommendations in the boot protocol documentation. Revamp to make it more up to date. In particular, the common use of the heap actually requires (slightly) more than 4K of heap plus stack, which is the recommended amount in the document; currently the code compensates by being smaller than specified, but we can't assume that will be true forever. Thus, recommend that if we have a modern bzImage kernel, that the bootloader maximizes the available space. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
revert 'sched: redundant reschedule when set_user_nice() boosts a prio of a task from the "expired" array' Revert commit bd53f96c. Con says: This is no good, sorry. The one I saw originally was with the staircase deadline cpu scheduler in situ and was different. #define TASK_PREEMPTS_CURR(p, rq) \ ((p)->prio < (rq)->curr->prio) (((p)->prio < (rq)->curr->prio) && ((p)->array == (rq)->active)) This will fail to wake up a runqueue for a task that has been migrated to the expired array of a runqueue which is otherwise idle which can happen with smp balancing, Cc: Dmitry Adamushko <dmitry.adamushko@gmail.com> Cc: Con Kolivas <kernel@kolivas.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
We have a standard suffix to associate a designation string to a sensor: _label. Use it instead of _position so that libsensors will catch it. (This isn't implemented yet, but should be soon.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
Let the applesmc device export its address to userspace. libsensors needs this to recognize the device and give it a unique ID. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Tilman Schmidt authored
Zero-sized allocations are pointless anyway, and the SLUB allocator complains about them, so stop doing that. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
The recent <linux/pci.h> cleanup uncovered that include/asm-m68k/scatterlist.h needs to include <linux/types.h> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Miscellaneous fixes to bring FRV up to date: (1) Copy the new syscall numbers from i386 to asm-frv/unistd.h and fill out the syscall table in entry.S too. (2) Mark __frv_uart0 and __frv_uart1 __pminitdata rather than __initdata so that determine_clocks() can access them when CONFIG_PM=y. (3) Make arch/frv/mm/elf-fdpic.c include asm/mman.h so that MAP_FIXED is available (fixes commit 2fd3beba). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
/proc/pid/clear_refs is only defined in the CONFIG_MMU case, so make sure we don't have any references to clear_refs_smap() in generic procfs code. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yasunori Goto authored
This is to fix unnecessary __meminit definition. These are exported for kernel modules. I compiled on ia64/x86-64 with memory hotplug on/off. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] cryptomgr: Fix use after free
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Optimize fault kprobe handling just like powerpc. [SPARC]: Wire up utimensat syscall. [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code. [SPARC64]: Kill asm-sparc64/pbm.h [ATYFB]: Fix sparc includes. [QLA2XXX]: Fix build on sparc. [SPARC64]: Removal of trivial pci_controller_info uses. [SPARC64]: Move index info pci_pbm_info. [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info. [SPARC64]: Move pci_ops into pci_pbm_info. [SPARC64] SBUS: Error interrupt registry cleanups. [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX. [SPARC64] PCI: Use common routine to fetch PBM properties.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits) [SCSI] zfcp: clear boxed flag on unit reopen. [SCSI] zfcp: clear adapter failed flag if an fsf request times out. [SCSI] zfcp: rework request ID management. [SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI [SCSI] zfcp: Locking for req_no and req_seq_no [SCSI] zfcp: print S_ID and D_ID with 3 bytes [SCSI] ipr: Use PCI-E reset API for new ipr adapter [SCSI] qla2xxx: Update version number to 8.01.07-k7. [SCSI] qla2xxx: Add MSI support. [SCSI] qla2xxx: Correct pci_set_msi() usage semantics. [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed. [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings. [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization. [SCSI] zfcp: Stop system after memory corruption [SCSI] mesh: cleanup variable usage in interrupt handler [SCSI] megaraid: replace yield() with cond_resched() [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n [SCSI] aacraid: correct SUN products to README [SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers [SCSI] aacraid: kexec fix (reset interrupt handler) ...
-
Linus Torvalds authored
This reverts commit 464bdd33. Peter Anvin correctly points out that VESA modes have nothing to do with frame buffers per se - they are often just regular extended text modes. Disabling them just because we don't have frame buffer support is very wrong. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Antonino A. Daplas <adaplas@gmail.com>, Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
.. to match what we do on write(). This way, people who write to files by using [f]truncate + writable mmap have the same semantics as if they were using the write() family of system calls. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Herbert Xu authored
By the time kthread_run returns the param may have already been freed so writing the returned thread_struct pointer to param is wrong. In fact, we don't need it in param anyway so this patch simply puts it on the stack. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
David S. Miller authored
And eliminate DIE_GPF while we're at it. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 May, 2007 16 commits
-
-
David S. Miller authored
Everything it contains can be hidden in pci_impl.h Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
No need to use asm/pbm.h here. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
We now use pci_device_to_OF_node() to get properties and of_get_property() returns const pointers. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Do not use IRQF_SHARED, these interrupt numbers should all be unique. Also use name strings without spaces in them just like PCI controller drivers do, for consistency. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
The idea is to move more and more things into the pbm, with the eventual goal of eliminating the pci_controller_info entirely as there really isn't any need for it. This stage of the transformations requires some reworking of the PCI error interrupt handling. It might be tricky to get rid of the pci_controller_info parenting for a few reasons: 1) When we get an uncorrectable or correctable error we want to interrogate the IOMMU and streaming cache of both PBMs for error status. These errors come from the UPA front-end which is shared between the two PBM PCI bus segments. Historically speaking this is why I choose the datastructure hierarchy of pci_controller_info-->pci_pbm_info 2) The probing does a portid/devhandle match to look for the 'other' pbm, but this is entirely an artifact and can be eliminated trivially. What we could do to solve #1 is to have a "buddy" pointer from one pbm to another. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
They are totally unused. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Namely bus-range and ino-bitmap. This allows us also to eliminate pci_controller_info's pci_{first,last}_busno fields as only the pbm ones are used now. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pierre Ossman authored
As mmc_detect_change() can be called from irq context, using claim (which can sleep) is inherently unsafe. Use the host spinlock instead, which also is faster. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-
Jan Engelhardt authored
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-
Alex Dubov authored
Socket power must be fully controlled by adapter driver. This also prevents unnecessary power-off of the socket when media driver is unloaded, yet media remains in the socket. Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (32 commits) Use menuconfig objects - hwmon hwmon/smsc47b397: Use dynamic sysfs callbacks hwmon/smsc47b397: Convert to a platform driver hwmon/w83781d: Deprecate W83627HF support hwmon/w83781d: Use dynamic sysfs callbacks hwmon/w83781d: Be less i2c_client-centric hwmon/w83781d: Clean up conversion macros hwmon/w83781d: No longer use i2c-isa hwmon/ams: Do not print error on systems without apple motion sensor hwmon/ams: Fix I2C read retry logic hwmon: New AD7416, AD7417 and AD7418 driver hwmon/coretemp: Add documentation hwmon: New coretemp driver i386: Use functions from library in msr driver i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpu hwmon/lm75: Use dynamic sysfs callbacks hwmon/lm78: Use dynamic sysfs callbacks hwmon/lm78: Be less i2c_client-centric hwmon/lm78: No longer use i2c-isa hwmon: New max6650 driver ...
-
Geert Uytterhoeven authored
Commit c5a4dd8b introduced the following compiler warnings: net/sunrpc/sched.c:766: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'size_t' net/sunrpc/sched.c:785: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'size_t' - Use %zu to format size_t - Kill 2 useless casts Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-