Add documentation of the ARM specific behaviour of the mappings setup by
the ioremap() series of macros.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull arch/tile updates from Chris Metcalf:
 "These are a grab bag of changes to improve debugging and respond to a
  variety of issues raised on LKML over the last couple of months"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: avoid a "label not used" warning in do_page_fault()
  tile: vdso: use raw_read_seqcount_begin() in vdso
  tile: force CONFIG_TILEGX if ARCH != tilepro
  tile: improve stack backtrace
  tile: fix "odd fault" warning for stack backtraces
  tile: set up initial stack top to honor STACK_TOP_DELTA
  tile: support delivering NMIs for multicore backtrace
  drivers/tty/hvc/hvc_tile.c: properly return -EAGAIN
  tile: add <asm/word-at-a-time.h> and enable support functions
  tile: use READ_ONCE() in arch_spin_is_locked()
  tile: modify arch_spin_unlock_wait() semantics

Pull more s390 updates from Martin Schwidefsky:
 "There is one larger patch for the AP bus code to make it work with the
  longer reset periods of the latest crypto cards.

  A new default configuration, a naming cleanup for SMP and a few fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kdump: fix compile for !SMP
  s390/kdump: fix nosmt kernel parameter
  s390: new default configuration
  s390/smp: cleanup core vs. cpu in the SCLP interface
  s390/smp: fix sigp cpu detection loop
  s390/zcrypt: Fixed reset and interrupt handling of AP queues
  s390/kdump: fix REGSET_VX_LOW vector register ELF notes
  s390/bpf: Fix backward jumps

Pull CIFS/SMB3 updates from Steve French:
 "Includes two bug fixes, as well as (minimal) support for the new
  protocol dialect (SMB3.1.1), and support for two ioctls including
  reflink (duplicate extents) file copy and set integrity"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Unset CIFS_MOUNT_POSIX_PATHS flag when following dfs mounts
  Update negotiate protocol for SMB3.11 dialect
  Add ioctl to set integrity
  Add Get/Set Integrity Information structure definitions
  Add reflink copy over SMB3.11 with new FSCTL_DUPLICATE_EXTENTS
  Add SMB3.11 mount option synonym for new dialect
  add struct FILE_STANDARD_INFO
  Make dialect negotiation warning message easier to read
  Add defines and structs for smb3.1 dialect
  Allow parsing vers=3.11 on cifs mount
  client MUST ignore EncryptionKeyLength if CAP_EXTENDED_SECURITY is set

Pul xfs updates from Dave Chinner:
 "There's a couple of small API changes to the core DAX code which
  required small changes to the ext2 and ext4 code bases, but otherwise
  everything is within the XFS codebase.

  This update contains:

   - A new sparse on-disk inode record format to allow small extents to
     be used for inode allocation when free space is fragmented.

   - DAX support.  This includes minor changes to the DAX core code to
     fix problems with lock ordering and bufferhead mapping abuse.

   - transaction commit interface cleanup

   - removal of various unnecessary XFS specific type definitions

   - cleanup and optimisation of freelist preparation before allocation

   - various minor cleanups

   - bug fixes for
	- transaction reservation leaks
	- incorrect inode logging in unwritten extent conversion
	- mmap lock vs freeze ordering
	- remote symlink mishandling
	- attribute fork removal issues"

* tag 'xfs-for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (49 commits)
  xfs: don't truncate attribute extents if no extents exist
  xfs: clean up XFS_MIN_FREELIST macros
  xfs: sanitise error handling in xfs_alloc_fix_freelist
  xfs: factor out free space extent length check
  xfs: xfs_alloc_fix_freelist() can use incore perag structures
  xfs: remove xfs_caddr_t
  xfs: use void pointers in log validation helpers
  xfs: return a void pointer from xfs_buf_offset
  xfs: remove inst_t
  xfs: remove __psint_t and __psunsigned_t
  xfs: fix remote symlinks on V5/CRC filesystems
  xfs: fix xfs_log_done interface
  xfs: saner xfs_trans_commit interface
  xfs: remove the flags argument to xfs_trans_cancel
  xfs: pass a boolean flag to xfs_trans_free_items
  xfs: switch remaining xfs_trans_dup users to xfs_trans_roll
  xfs: check min blks for random debug mode sparse allocations
  xfs: fix sparse inodes 32-bit compile failure
  xfs: add initial DAX support
  xfs: add DAX IO path support
  ...

Pull btrfs updates from Chris Mason:
 "Outside of our usual batch of fixes, this integrates the subvolume
  quota updates that Qu Wenruo from Fujitsu has been working on for a
  few releases now.  He gets an extra gold star for making btrfs smaller
  this time, and fixing a number of quota corners in the process.

  Dave Sterba tested and integrated Anand Jain's sysfs improvements.
  Outside of exporting a symbol (ack'd by Greg) these are all internal
  to btrfs and it's mostly cleanups and fixes.  Anand also attached some
  of our sysfs objects to our internal device management structs instead
  of an object off the super block.  It will make device management
  easier overall and it's a better fit for how the sysfs files are used.
  None of the existing sysfs files are moved around.

  Thanks for all the fixes everyone"

* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (87 commits)
  btrfs: delayed-ref: double free in btrfs_add_delayed_tree_ref()
  Btrfs: Check if kobject is initialized before put
  lib: export symbol kobject_move()
  Btrfs: sysfs: add support to show replacing target in the sysfs
  Btrfs: free the stale device
  Btrfs: use received_uuid of parent during send
  Btrfs: fix use-after-free in btrfs_replay_log
  btrfs: wait for delayed iputs on no space
  btrfs: qgroup: Make snapshot accounting work with new extent-oriented qgroup.
  btrfs: qgroup: Add the ability to skip given qgroup for old/new_roots.
  btrfs: ulist: Add ulist_del() function.
  btrfs: qgroup: Cleanup the old ref_node-oriented mechanism.
  btrfs: qgroup: Switch self test to extent-oriented qgroup mechanism.
  btrfs: qgroup: Switch to new extent-oriented qgroup mechanism.
  btrfs: qgroup: Switch rescan to new mechanism.
  btrfs: qgroup: Add new qgroup calculation function btrfs_qgroup_account_extents().
  btrfs: backref: Add special time_seq == (u64)-1 case for btrfs_find_all_roots().
  btrfs: qgroup: Add new function to record old_roots.
  btrfs: qgroup: Record possible quota-related extent for qgroup.
  btrfs: qgroup: Add function qgroup_update_counters().
  ...

Pull more block layer patches from Jens Axboe:
 "A few later arrivers that I didn't fold into the first pull request,
  so we had a chance to run some testing.  This contains:

   - NVMe:
        - Set of fixes from Keith
        - 4.4 and earlier gcc build fix from Andrew

   - small set of xen-blk{back,front} fixes from Bob Liu.

   - warnings fix for bogus inline statement in I_BDEV() from Geert.

   - error code fixup for SG_IO ioctl from Paolo Bonzini"

* 'for-linus' of git://git.kernel.dk/linux-block:
  drivers/block/nvme-core.c: fix build with gcc-4.4.4
  bdi: Remove "inline" keyword from exported I_BDEV() implementation
  block: fix bogus EFAULT error from SG_IO ioctl
  NVMe: Fix filesystem deadlock on removal
  NVMe: Failed controller initialization fixes
  NVMe: Unify controller probe and resume
  NVMe: Don't use fake status on cancelled command
  NVMe: Fix device cleanup on initialization failure
  drivers: xen-blkfront: only talk_to_blkback() when in XenbusStateInitialising
  xen/block: add multi-page ring support
  driver: xen-blkfront: move talk_to_blkback to a more suitable place
  drivers: xen-blkback: delay pending_req allocation to connect_ring

In a dfs setup where the client transitions from a server which supports
posix paths to a server which doesn't support posix paths, the flag
CIFS_MOUNT_POSIX_PATHS is not reset. This leads to the wrong directory
separator being used causing smb commands to fail.

Consider the following case where a dfs share on a samba server points
to a share on windows smb server.
 # mount -t cifs -o .. //vm140-31/dfsroot/testwin/
 # ls -l /mnt; touch /mnt/a
 total 0
 touch: cannot touch ‘/mnt/a’: No such file or directory
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>

Pull md updates from Neil Brown:
 "A mixed bag

   - a few bug fixes
   - some performance improvement that decrease lock contention
   - some clean-up

  Nothing major"

* tag 'md/4.2' of git://neil.brown.name/md:
  md: clear Blocked flag on failed devices when array is read-only.
  md: unlock mddev_lock on an error path.
  md: clear mddev->private when it has been freed.
  md: fix a build warning
  md/raid5: ignore released_stripes check
  md/raid5: per hash value and exclusive wait_for_stripe
  md/raid5: split wait_for_stripe and introduce wait_for_quiescent
  wait: introduce wait_event_exclusive_cmd
  md: convert to kstrto*()
  md/raid10: make sync_request_write() call bio_copy_data()

This patch restores the slab creation sequence that was broken by commit
4066c33d and also reverts the portions that introduced the
KMALLOC_LOOP_XXX macros. Those can never really work since the slab creation
is much more complex than just going from a minimum to a maximum number.

The latest upstream kernel boots cleanly on my machine with a 64 bit x86
configuration under KVM using either SLAB or SLUB.

Fixes: 4066c33d ("support the slub_debug boot option")
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull libnvdimm subsystem from Dan Williams:
 "The libnvdimm sub-system introduces, in addition to the
  libnvdimm-core, 4 drivers / enabling modules:

  NFIT:
    Instantiates an "nvdimm bus" with the core and registers memory
    devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware
    Interface table).

    After registering NVDIMMs the NFIT driver then registers "region"
    devices.  A libnvdimm-region defines an access mode and the
    boundaries of persistent memory media.  A region may span multiple
    NVDIMMs that are interleaved by the hardware memory controller.  In
    turn, a libnvdimm-region can be carved into a "namespace" device and
    bound to the PMEM or BLK driver which will attach a Linux block
    device (disk) interface to the memory.

  PMEM:
    Initially merged in v4.1 this driver for contiguous spans of
    persistent memory address ranges is re-worked to drive
    PMEM-namespaces emitted by the libnvdimm-core.

    In this update the PMEM driver, on x86, gains the ability to assert
    that writes to persistent memory have been flushed all the way
    through the caches and buffers in the platform to persistent media.
    See memcpy_to_pmem() and wmb_pmem().

  BLK:
    This new driver enables access to persistent memory media through
    "Block Data Windows" as defined by the NFIT.  The primary difference
    of this driver to PMEM is that only a small window of persistent
    memory is mapped into system address space at any given point in
    time.

    Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access
    different portions of the media.  BLK-mode, by definition, does not
    support DAX.

  BTT:
    This is a library, optionally consumed by either PMEM or BLK, that
    converts a byte-accessible namespace into a disk with atomic sector
    update semantics (prevents sector tearing on crash or power loss).

    The sinister aspect of sector tearing is that most applications do
    not know they have a atomic sector dependency.  At least today's
    disk's rarely ever tear sectors and if they do one almost certainly
    gets a CRC error on access.  NVDIMMs will always tear and always
    silently.  Until an application is audited to be robust in the
    presence of sector-tearing the usage of BTT is recommended.

  Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
  Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
  Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
  Wysocki, and Bob Moore"

* tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits)
  arch, x86: pmem api for ensuring durability of persistent memory updates
  libnvdimm: Add sysfs numa_node to NVDIMM devices
  libnvdimm: Set numa_node to NVDIMM devices
  acpi: Add acpi_map_pxm_to_online_node()
  libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only
  pmem: flag pmem block devices as non-rotational
  libnvdimm: enable iostat
  pmem: make_request cleanups
  libnvdimm, pmem: fix up max_hw_sectors
  libnvdimm, blk: add support for blk integrity
  libnvdimm, btt: add support for blk integrity
  fs/block_dev.c: skip rw_page if bdev has integrity
  libnvdimm: Non-Volatile Devices
  tools/testing/nvdimm: libnvdimm unit test infrastructure
  libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory
  nd_btt: atomic sector updates
  libnvdimm: infrastructure for btt devices
  libnvdimm: write blk label set
  libnvdimm: write pmem label set
  libnvdimm: blk labels and namespace instantiation
  ...

Pull dmaengine updates from Vinod Koul:
 "This time we have support for few new devices, few new features and
  odd fixes spread thru the subsystem.

  New devices added:
   - support for CSRatlas7 dma controller
   - Allwinner H3(sun8i) controller
   - TI DMA crossbar driver on DRA7x
   - new pxa driver

  New features added:
   - memset support is bought back now that we have a user in xdmac controller
   - interleaved transfers support different source and destination strides
   - supporting DMA routers and configuration thru DT
   - support for reusing descriptors
   - xdmac memset and interleaved transfer support
   - hdmac support for interleaved transfers
   - omap-dma support for memcpy

  Others:
   - Constify platform_device_id
   - mv_xor fixes and improvements"

* tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: xgene: fix file permission
  dmaengine: fsl-edma: clear pending interrupts on initialization
  dmaengine: xdmac: Add memset support
  Documentation: dmaengine: document DMA_CTRL_ACK
  dmaengine: virt-dma: don't always free descriptor upon completion
  dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations"
  dmaengine: hdmac: Implement interleaved transfers
  dmaengine: Move icg helpers to global header
  dmaengine: mv_xor: improve descriptors list handling and reduce locking
  dmaengine: mv_xor: Enlarge descriptor pool size
  dmaengine: mv_xor: add support for a38x command in descriptor mode
  dmaengine: mv_xor: Rename function for consistent naming
  dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup
  dmaengine: pl330: fix wording in mcbufsz message
  dmaengine: sirf: add CSRatlas7 SoC support
  dmaengine: xgene-dma: Fix "incorrect type in assignement" warnings
  dmaengine: fix kernel-doc documentation
  dmaengine: pxa_dma: add support for legacy transition
  dmaengine: pxa_dma: add debug information
  dmaengine: pxa: add pxa dmaengine driver
  ...

Pull ia64 updates from Tony Luck:
 "Pair of ia64 cleanups"

* tag 'please-pull-misc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: Use setup_timer
  ia64: export flush_icache_range for module use

Merge tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "This update adds two new test suites: futex and seccomp.

  In addition, it includes fixes for bugs in timers, other tests, and
  compile framework.  It introduces new quicktest feature to enable
  users to choose to run tests that complete in a short time"

* tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: add quicktest support
  selftests: add seccomp suite
  selftest, x86: fix incorrect comment
  tools selftests: Fix 'clean' target with make 3.81
  selftests/futex: Add .gitignore
  kselftest: Add exit code defines
  selftests: Add futex tests to the top-level Makefile
  selftests/futex: Increment ksft pass and fail counters
  selftests/futex: Update Makefile to use lib.mk
  selftests: Add futex functional tests
  kselftests: timers: Check _ALARM clockids are supported before suspending
  kselftests: timers: Ease alarmtimer-suspend unreasonable latency value
  kselftests: timers: Increase delay between suspends in alarmtimer-suspend
  selftests/exec: do not install subdir as it is already created
  selftests/ftrace: install test.d
  selftests: copy TEST_DIRS to INSTALL_PATH
  Test compaction of mlocked memory
  selftests/mount: output WARN messages when mount test skipped
  selftests/timers: Make git ignore all binaries in timers test suite

Fix this compile error:

arch/s390/kernel/setup.c:875:2: error:
 implicit declaration of function 'smp_save_dump_cpus'
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Send negotiate contexts when SMB3.11 dialect is negotiated
(ie the preauth and the encryption contexts) and
Initialize SMB3.11 preauth negotiate context salt to random bytes

Followon patch will update session setup and tree connect
Signed-off-by: Steve French <steve.french@primarydata.com>

set integrity increases reliability of files stored on SMB3 servers.
Add ioctl to allow setting this on files on SMB3 and later mounts.
Signed-off-by: Steve French <steve.french@primarydata.com>

Signed-off-by: Steve French <steve.french@primarydata.com>

 Getting fantastic copy performance with cp --reflink over SMB3.11
 using the new FSCTL_DUPLICATE_EXTENTS.

 This FSCTL was added in the SMB3.11 dialect (testing was
 against REFS file system) so have put it as a 3.11 protocol
 specific operation ("vers=3.1.1" on the mount).  Tested at
 the SMB3 plugfest in Redmond.

 It depends on the new FS Attribute (BLOCK_REFCOUNTING) which
 is used to advertise support for the ability to do this ioctl
 (if you can support multiple files pointing to the same block
 than this refcounting ability or equivalent is needed to
 support the new reflink-like duplicate extent SMB3 ioctl.
Signed-off-by: Steve French <steve.french@primarydata.com>

Pull m68knommu updates from Greg Ungerer:
 "Only a couple of small changes.

  Improved the m68knommu MAINTAINERS entry to make it clearer which m68k
  parts this applies to, and a print format clean up"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: improve m68knommu MAINTAINERS entry
  m68k: Use vsprintf %pM extension

Pull UML updates from Richard Weinberger:

 - remove hppfs ("HonePot ProcFS")

 - initial support for musl libc

 - uaccess cleanup

 - random cleanups and bug fixes all over the place

* 'for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (21 commits)
  um: Don't pollute kernel namespace with uapi
  um: Include sys/types.h for makedev(), major(), minor()
  um: Do not use stdin and stdout identifiers for struct members
  um: Do not use __ptr_t type for stack_t's .ss pointer
  um: Fix mconsole dependency
  um: Handle tracehook_report_syscall_entry() result
  um: Remove copy&paste code from init.h
  um: Stop abusing __KERNEL__
  um: Catch unprotected user memory access
  um: Fix warning in setup_signal_stack_si()
  um: Rework uaccess code
  um: Add uaccess.h to ldt.c
  um: Add uaccess.h to syscalls_64.c
  um: Add asm/elf.h to vma.c
  um: Cleanup mem_32/64.c headers
  um: Remove hppfs
  um: Move syscall() declaration into os.h
  um: kernel: ksyms: Export symbol syscall() for fixing modpost issue
  um/os-Linux: Use char[] for syscall_stub declarations
  um: Use char[] for linker script address declarations
  ...

Pull VFIO updates from Alex Williamson:

 - fix race with device reference versus driver release (Alex Williamson)

 - add reset hooks and Calxeda xgmac reset for vfio-platform (Eric Auger)

 - enable vfio-platform for ARM64 (Eric Auger)

 - tag Baptiste Reynal as vfio-platform sub-maintainer (Alex Williamson)

* tag 'vfio-v4.2-rc1' of git://github.com/awilliam/linux-vfio:
  MAINTAINERS: Add vfio-platform sub-maintainer
  VFIO: platform: enable ARM64 build
  VFIO: platform: Calxeda xgmac reset module
  VFIO: platform: populate the reset function on probe
  VFIO: platform: add reset callback
  VFIO: platform: add reset struct and lookup table
  vfio/pci: Fix racy vfio_device_get_from_dev() call

Most people think of SMB 3.1.1 as SMB version 3.11 so add synonym
for "vers=3.1.1" of "vers=3.11" on mount.

Also make sure that unlike SMB3.0 and 3.02 we don't send
validate negotiate on mount (it is handled by negotiate contexts) -
add list of SMB3.11 specific functions (distinct from 3.0 dialect).

Signed-off-by: Steve French <steve.french@primarydata.com>w

Signed-off-by: Gregor Beck <gbeck@sernet.de>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>

Dialect version and minor version are easier to read in hex
Signed-off-by: Steve French <steve.french@primarydata.com>

Add new structures and defines for SMB3.11 negotiate, session setup and tcon

See MS-SMB2-diff.pdf section 2.2.3 for additional protocol documentation.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Steve French <steve.french@primarydata.com>

Parses and recognizes "vers=3.1.1" on cifs mount and allows sending
0x0311 as a new CIFS/SMB3 dialect. Subsequent patches will add
the new negotiate contexts and updated session setup
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Steve French <steve.french@primarydata.com>

[MS-SMB] 2.2.4.5.2.1 states:

"ChallengeLength (1 byte): When the CAP_EXTENDED_SECURITY bit is set,
 the server MUST set this value to zero and clients MUST ignore this
 value."
Signed-off-by: Noel Power <noel.power@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>

Pull audit updates from Paul Moore:
 "Four small audit patches for v4.2, all bug fixes.  Only 10 lines of
  change this time so very unremarkable, the patch subject lines pretty
  much tell the whole story"

* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
  audit: Fix check of return value of strnlen_user()
  audit: obsolete audit_context check is removed in audit_filter_rules()
  audit: fix for typo in comment to function audit_log_link_denied()
  lsm: rename duplicate labels in LSM_AUDIT_DATA_TASK audit message type

Pull security subsystem updates from James Morris:
 "The main change in this kernel is Casey's generalized LSM stacking
  work, which removes the hard-coding of Capabilities and Yama stacking,
  allowing multiple arbitrary "small" LSMs to be stacked with a default
  monolithic module (e.g.  SELinux, Smack, AppArmor).

  See
        https://lwn.net/Articles/636056/

  This will allow smaller, simpler LSMs to be incorporated into the
  mainline kernel and arbitrarily stacked by users.  Also, this is a
  useful cleanup of the LSM code in its own right"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits)
  tpm, tpm_crb: fix le64_to_cpu conversions in crb_acpi_add()
  vTPM: set virtual device before passing to ibmvtpm_reset_crq
  tpm_ibmvtpm: remove unneccessary message level.
  ima: update builtin policies
  ima: extend "mask" policy matching support
  ima: add support for new "euid" policy condition
  ima: fix ima_show_template_data_ascii()
  Smack: freeing an error pointer in smk_write_revoke_subj()
  selinux: fix setting of security labels on NFS
  selinux: Remove unused permission definitions
  selinux: enable genfscon labeling for sysfs and pstore files
  selinux: enable per-file labeling for debugfs files.
  selinux: update netlink socket classes
  signals: don't abuse __flush_signals() in selinux_bprm_committed_creds()
  selinux: Print 'sclass' as string when unrecognized netlink message occurs
  Smack: allow multiple labels in onlycap
  Smack: fix seq operations in smackfs
  ima: pass iint to ima_add_violation()
  ima: wrap event related data to the new ima_event_data structure
  integrity: add validity checks for 'path' parameter
  ...

Pull MIPS updates from Ralf Baechle:

 - Improvements to the tlb_dump code
 - KVM fixes
 - Add support for appended DTB
 - Minor improvements to the R12000 support
 - Minor improvements to the R12000 support
 - Various platform improvments for BCM47xx
 - The usual pile of minor cleanups
 - A number of BPF fixes and improvments
 - Some improvments to the support for R3000 and DECstations
 - Some improvments to the ATH79 platform support
 - A major patchset for the JZ4740 SOC adding support for the CI20 platform
 - Add support for the Pistachio SOC
 - Minor BMIPS/BCM63xx platform support improvments.
 - Avoid "SYNC 0" as memory barrier when unlocking spinlocks
 - Add support for the XWR-1750 board.
 - Paul's __cpuinit/__cpuinitdata cleanups.
 - New Malta CPU board support large memory so enable ZONE_DMA32.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits)
  MIPS: spinlock: Adjust arch_spin_lock back-off time
  MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA
  MIPS: BCM47xx: Simplify handling SPROM revisions
  MIPS: Cobalt Don't use module_init in non-modular MTD registration.
  MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
  MIPS: use for_each_sg()
  MIPS: BCM47xx: Don't select BCMA_HOST_PCI
  MIPS: BCM47xx: Add helper variable for storing NVRAM length
  MIPS: IRQ/IP27: Move IRQ allocation API to platform code.
  MIPS: Replace smp_mb with release barrier function in unlocks.
  MIPS: i8259: DT support
  MIPS: Malta: Basic DT plumbing
  MIPS: include errno.h for ENODEV in mips-cm.h
  MIPS: Define GCR_GIC_STATUS register fields
  MIPS: BPF: Introduce BPF ASM helpers
  MIPS: BPF: Use BPF register names to describe the ABI
  MIPS: BPF: Move register definition to the BPF header
  MIPS: net: BPF: Replace RSIZE with SZREG
  MIPS: BPF: Free up some callee-saved registers
  MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers
  ...

gcc-4.4.4 (and possibly other versions) fail the compile when initializers
are used with anonymous unions.  Work around this.

drivers/block/nvme-core.c: In function 'nvme_identify_ctrl':
drivers/block/nvme-core.c:1163: error: unknown field 'identify' specified in initializer
drivers/block/nvme-core.c:1163: warning: missing braces around initializer
drivers/block/nvme-core.c:1163: warning: (near initialization for 'c.<anonymous>')
drivers/block/nvme-core.c:1164: error: unknown field 'identify' specified in initializer
drivers/block/nvme-core.c:1164: warning: excess elements in struct initializer
drivers/block/nvme-core.c:1164: warning: (near initialization for 'c')
...

This patch has no effect on text size with gcc-4.8.2.

Fixes: d29ec824 ("nvme: submit internal commands through the block layer")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge branch 'stable/for-jens-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus

With gcc 3.4.6/4.1.2/4.2.4 (not with 4.4.7/4.6.4/4.8.4):

      CC      fs/block_dev.o
    include/linux/fs.h:804: warning: ‘I_BDEV’ declared inline after being called
    include/linux/fs.h:804: warning: previous declaration of ‘I_BDEV’ was here

Commit a212b105 ("bdi: make inode_to_bdi() inline") added a
caller of I_BDEV() in a header file, exposing the bogus "inline" on the
exported implementation.

Drop the "inline" keyword to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

Whenever blk_fill_sghdr_rq fails, its errno code is ignored and changed to
EFAULT.  This can cause very confusing errors:

  $ sg_persist -k /dev/sda
  persistent reservation in: pass through os error: Bad address

The fix is trivial, just propagate the return value from
blk_fill_sghdr_rq.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Move gendisk deletion before controller shutdown so filesystem may sync
dirty pages. Before, this would deadlock trying to allocate requests
on frozen queues that are about to be deleted.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This fixes an infinite device reset loop that may occur on devices that
fail initialization. If the drive fails to become ready for any reason
that does not involve an admin command timeout, the probe task should
assume the drive is unavailable and remove it from the topology. In
the case an admin command times out during device probing, the driver's
existing reset action will handle removing the drive.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This unifies probe and resume so they both may be scheduled in the same
way. This is necessary for error handling that may occur during device
initialization since the task to cleanup the device wouldn't be able to
run if it is blocked on device initialization.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Synchronized commands do different things for timed out commands
vs. controller returned errors.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Don't release block queue and tagging resoureces if the driver never
got them in the first place. This can happen if the controller fails to
become ready, if memory wasn't available to allocate a tagset or admin
queue, or if the resources were released as part of error recovery.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>