- 13 Sep, 2016 1 commit
-
-
Michael Neuling authored
Currently the label says "Core" but lists the thread numbers. This ends up looking like this: # cat /sys/class/hwmon/hwmon0/temp[1-4]_label Core 0-7 Core 8-15 Core 16-23 Core 24-31 This is misleading as it looks like it's cores 0-7 when it's actually threads 0-7. This changes the print to just give the core number, so the output now looks like this: # cat /sys/class/hwmon/hwmon0/temp[1-4]_label Core 0 Core 8 Core 16 Core 24 Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
- 10 Sep, 2016 2 commits
-
-
Joshua Scott authored
adt7470_remove will wait for the update thread to complete before returning. This had a worst-case time of up to the user-configurable auto_update_interval. Replace msleep_interruptible with set_current_state and schedule_timeout so that kthread_stop will interrupt the sleep. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Joshua Scott authored
Add write support for the alarm_mask. A base of 0 is provided so that either hex or decimal can be used. The hex format when reading alarm_mask is unchanged. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
- 09 Sep, 2016 37 commits
-
-
Arnd Bergmann authored
The newly added hwmon driver fails to build in an allmodconfig kernel: ERROR: "memblock_is_memory" [drivers/hwmon/xgene-hwmon.ko] undefined! According to comments in the code, the mailbox is a shared memory region, not a set of MMIO registers, so we should use memremap() for mapping it instead of ioremap or acpi_os_ioremap, and pointer dereferences instead of readl/writel. The driver already uses plain kernel pointers, so it's a bit unusual to work with functions that operate on __iomem pointers, and this fixes that part too. I'm using READ_ONCE/WRITE_ONCE here to keep the existing behavior regarding the ordering of the accesses from the CPU, but note that there are no barriers (also unchanged from before). I'm also keeping the endianness behavior, though I'm unsure whether the message data was supposed to be in LE32 format in the first place, it's possible this was meant to be interpreted as a byte stream instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hoan Tran <hotran@apm.com> Tested-by: Hoan Tran <hotran@apm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Simplify code and reduce code size by using the new hwmon registration API. Other changes: - Convert to use regmap, and drop local caching. This avoids reading registers unnecessarily, and uses regmap for caching of non-volatile registers. - Add support for temp2_max, temp2_max_alarm, temp2_max_hyst, and temp2_offset. - Order include files alphabetically - Drop FSF address - Check errors from register read and write functions and report to userspace. - Accept negative hysteresis values. While unlikely, a maximum limit _can_ be set to a value smaller than 31 degrees C, which makes negative hysteresis values possible. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Reduce driver complexity and size by converting it to the new hwmon API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
hotran authored
The system crashes during probing xgene-hwmon driver when temperature alarm interrupt occurs before. It's because - xgene_hwmon_probe() requests mailbox channel which also enables the mailbox interrupt. - As temperature alarm interrupt is pending, ISR runs and crashes when accesses into invalid resourse as unmapped PCC shared memory. This patch fixes this issue by saving this alarm message and scheduling a bottom handler after xgene_hwmon_probe() finish. Signed-off-by: Hoan Tran <hotran@apm.com> Reported-by: Itaru Kitayama <itaru.kitayama@riken.jp> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Quentin Schulz authored
iio_channel_get_all returns -ENODEV when it cannot find either phandles and properties in the Device Tree or channels whose consumer_dev_name matches iio_hwmon in iio_map_list. The iio_map_list is filled in by iio drivers which might be probed after iio_hwmon. It is better to defer the probe of iio_hwmon if such error is returned by iio_channel_get_all in order to let a chance to iio drivers to expose channels in iio_map_list. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Mike Looijmans authored
Add devicetree property for early initialization of the fan controller to prevent overheating, for example when resetting the board while the fan was completely turned off. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Mike Looijmans authored
The fan can be stopped by writing "3" to pwm1_enable in sysfs. Add devicetree property for early initialization of the fan controller to prevent overheating, for example when resetting the board while the fan was completely turned off. Also improve error reporting, I2C failures were ignored while writing new values. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Mike Looijmans authored
Parse devicetree parameters for voltage and prescaler setting. This allows using multiple max6550 devices with varying settings, and also makes it possible to instantiate and configure the device using devicetree. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Mike Looijmans authored
This adds the devicetree binding documentation for the max6650 fan controller. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Jean Delvare authored
Remove the index comments at the end of it87_attributes_in. They serve no purpose (as there is no reference to them in it87_in_is_visible) and some of them were obviously wrong. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Matt Weber authored
The UCD90160 Power Supply Sequencer reuses the existing register layout, so just an id addition was required. Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Ronak Desai <ronak.desai@rockwellcollins.com> [groeck: Updated description, ordered alphabetically, added documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Markus Elfring authored
The field "owner" is set by the core. Thus delete an unneeded initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Thilo Cestonaro authored
Signed-off-by: Thilo Cestonaro <thilo@cestona.ro> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
hotran authored
This patch adds hardware temperature and power reading support for APM X-Gene SoC using the mailbox communication interface. Signed-off-by: Hoan Tran <hotran@apm.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
If both hwmon and thermal_sys are built as modules, and CONFIG_THERMAL_HWMON is enabled, the following cyclic module dependency is reported. depmod: ERROR: Found 2 modules in dependency cycles! depmod: ERROR: Cycle detected: hwmon -> thermal_sys -> hwmon Fixes: e4bce763adb2 ("hwmon: (core) New hwmon registration API") Reported-by: Vignesh R <vigneshr@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Joshua Scott authored
The ADT7470 supports a variety of PWM frequencies. This patch allows the frequency to be configured and viewed through the sysfs entry pwm1_freq. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Daniel Golle authored
Allow to specify the resistance of the attached shunt via DT by adding the shunt-resistor property. Fall-back to the previous default (1 mOhm) if unset. Signed-off-by: Daniel Golle <daniel@makrotopia.org> [groeck: Fixed 'line over 80 columns' checkpatch warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Daniel Golle authored
Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Since commit 698a7c24 ("hwmon: (nct6775) Support two SuperIO chips in the same system"), the driver supports two Super-IO chips. This has the undesirable side effect that force_id always detects a second chip at address 0xfff8, even if no chip exists at that address. nct6775: Found NCT6793D or compatible chip at 0x4e:0xfff8 If no chip at all is found at a given SIO address, it does not make sense to instantiate it. Limit force_id to only work if some chip is found, that is if the chip ID returns a value other than 0xffff. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Add basic pwm attribute support (no auto attributes) to new API. Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Describe the new registration API function as well as the data structures it requires. Acked-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Acked-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Acked-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Acked-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Acked-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Acked-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Up to now, each hwmon driver has to implement its own sysfs attributes. This requires a lot of template code, and distracts from the driver's core function to read and write chip registers. To be able to reduce driver complexity, move sensor attribute handling and thermal zone registration into hwmon core. By using the new API, driver code and data size is typically reduced by 20-70%, depending on driver complexity and the number of sysfs attributes supported. With this patch, the new API only supports thermal sensors. Support for other sensor types will be added with subsequent patches. Acked-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Ordering include files alphabetically makes it easier to add new ones. Stop including linux/spinlock.h and linux/kdev_t.h since both are not needed. Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Simplify code, reduce code size, and drop remove function as no longer needed. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-