- 28 Oct, 2010 40 commits
-
-
Alexandre Bounine authored
The switch port information is obtained and stored during RIO device setup. Therefore repeated reads from Switch Port Information CAR may be removed. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
- Rearrange RIO port-write interrupt handling to perform message buffering as soon as possible. - Modify to disable port-write controller when clearing Transaction Error (TE) bit. Signed-off-by:
-
Alexandre Bounine authored
This set of RapidIO patches extends support for standard error recovery mechanism and adds new IDT Gen2 sRIO switch devices - CPS-1848 and CPS-1616. Implementation of the standard error-stopped state recovery mechanism (as defined by the RapidIO specification) is required for the new switches. Version 2 of this set of patches addresses received comments and fixes an error notification setup issue found in the idt_gen2.c after the first version was released. This patch: Make RapidIO devices appear in /sys/devices/rapidio directory instead of top of /sys/devices directory. Signed-off-by:
-
Rakib Mullick authored
Both mxser_disable_must_enchance_mode() and mxser_get_must_hardware_id() called from function CheckIsMoxaMust(), when CONFIG_PCI=y. So mark both the functions under CONFIG_PCI. We were warned by the following warning. drivers/char/mxser.c:306: warning: `mxser_disable_must_enchance_mode' defined but not used drivers/char/mxser.c:391: warning: `mxser_get_must_hardware_id' defined but not used Signed-off-by:
Rakib Mullick <rakib.mullick@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Tracey Dent authored
Changed <module>-objs to <module>-y in Makefile. Signed-off-by:
Tracey Dent <tdent48227@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Tracey Dent authored
Changed <module>-objs to <module>-y in Makefile. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Tracey Dent authored
Changed <module>-objs to <module>-y in Makefile and use ccflags-y option. Signed-off-by:
-
Tracey Dent authored
Changed <module>-objs to <module>-y in Makefile. Signed-off-by:
-
Tracey Dent authored
Changed <module>-objs to <module>-y in Makefile. Signed-off-by:
-
Paul Fulghum authored
Add support for extended byte synchronous mode feature of hardware. Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
Vasiliy Kulikov authored
Structures tmp_params and new_line are copied to userland with some padding fields unitialized. It leads to leaking of stack memory. Signed-off-by:
Vasiliy Kulikov <segooon@gmail.com> Acked-by:
-
Vasiliy Kulikov authored
Structure par_timeout is copied to userland with some padding fields unitialized. Field tv_usec has type __kernel_suseconds_t, it differs from tv_sec's type on some architectures. It leads to leaking of stack memory. Signed-off-by:
-
Vasiliy Kulikov authored
Structure st_loc is copied to userland with some fields unitialized. It leads to leaking of stack memory. Signed-off-by:
-
Paul Fulghum authored
Fix a long standing bug with per device locking. Each device has an associated spinlock for synchronizing access to hardware and state information with the ISR. A single hardware card has one or more devices. Bug: Non ISR code correctly acquires and releases the per device lock. ISR incorrectly always acquires and releases the lock of the first device on the card. The decoupled and list based nature of the ISR and deferred processing interaction allowed this to work in normal operation. Exceptional events like an application forcing hardware shutdown, reset, or reconfiguration while active can trigger the bug. Fixed ISR to acquire and release the per device lock. One exception is manipulation of the GPIO card resource which is global and effectively owned by the first device of the card. Non-ISR access to GPIO resource is changed to use lock of first device on card. Signed-off-by:
-
Dimitri Sivanich authored
This patch for SGI Altix/IA64 eliminates interval long timer holdoffs in cases where we don't start an interval timer before the expiration time. This sometimes happens when a number of interval timers on the same shub with the same interval run simultaneously. Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Andrew Morton authored
This doesn't do anything. Cc: Timur Tabi <timur@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Amit Shah <amit.shah@redhat.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by:
-
Dan Carpenter authored
There was a release_region() missing on the error path. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Corey Minyard authored
__init and __exit belong after the return type on functions, not before. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Dan Rosenberg authored
This takes care of leaking uninitialized kernel stack memory to userspace from non-zeroed fields in structs in compat ipc functions. Signed-off-by:
Dan Rosenberg <drosenberg@vsecurity.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <stable@kernel.org> Signed-off-by:
-
Helge Deller authored
The kernel currently provides no functionality to analyze the RSS and swap space usage of each individual sysvipc shared memory segment. This patch adds this info for each existing shm segment by extending the output of /proc/sysvipc/shm by two columns for RSS and swap. Since shmctl(SHM_INFO) already provides a similiar calculation (it currently sums up all RSS/swap info for all segments), I did split out a static function which is now used by the /proc/sysvipc/shm output and shmctl(SHM_INFO). SAP products (esp. the SAP Netweaver ABAP Kernel) uses lots of big shared memory segments (we often have Linux systems with >= 16GB shm usage). Sometimes we get customer reports about "slow" system responses and while looking into their configurations we often find massive swapping activity on the system. With this patch it's now easy to see from the command line if and which shm segments gets swapped out (and how much) and can more easily give recommendations for system tuning. Without the patch it's currently not possible to do such shm analysis at all. Also... Add some spaces in front of the "size" field for 64bit kernels to get the columns correct if you cat the contents of the file. In sysvipc_shm_proc_show() the kernel prints the size value in "SPEC_SIZE" format, which is defined like this: #if BITS_PER_LONG <= 32 #define SIZE_SPEC "%10lu" #else #define SIZE_SPEC "%21lu" #endif So, if the header is not adjusted, the columns are not correctly aligned. I actually tested this on 32- and 64-bit and it seems correct now. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: Manfred Spraul <manfred@colorfullife.com> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
KOSAKI Motohiro authored
Presently do_execve() turns PF_KTHREAD off before search_binary_handler(). THis has a theorical risk of PF_KTHREAD getting lost. We don't have to turn PF_KTHREAD off in the ENOEXEC case. This patch moves this flag modification to after the finding of the executable file. This is only a theorical issue because kthreads do not call do_execve() directly. But fixing would be better. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Roland McGrath <roland@redhat.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
In /proc/stat, the number of per-IRQ event is shown by making a sum each irq's events on all cpus. But we can make use of kstat_irqs(). kstat_irqs() do the same calculation, If !CONFIG_GENERIC_HARDIRQ, it's not a big cost. (Both of the number of cpus and irqs are small.) If a system is very big and CONFIG_GENERIC_HARDIRQ, it does for_each_irq() for_each_cpu() - look up a radix tree - read desc->irq_stat[cpu] This seems not efficient. This patch adds kstat_irqs() for CONFIG_GENRIC_HARDIRQ and change the calculation as for_each_irq() look up radix tree for_each_cpu() - read desc->irq_stat[cpu] This reduces cost. A test on (4096cpusp, 256 nodes, 4592 irqs) host (by Jack Steiner) %time cat /proc/stat > /dev/null Before Patch: 2.459 sec After Patch : .561 sec [akpm@linux-foundation.org: unexport kstat_irqs, coding-style tweaks] [akpm@linux-foundation.org: fix unused variable 'per_irq_sum'] Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by:
Jack Steiner <steiner@sgi.com> Acked-by:
-
KAMEZAWA Hiroyuki authored
/proc/stat shows the total number of all interrupts to each cpu. But when the number of IRQs are very large, it take very long time and 'cat /proc/stat' takes more than 10 secs. This is because sum of all irq events are counted when /proc/stat is read. This patch adds "sum of all irq" counter percpu and reduce read costs. The cost of reading /proc/stat is important because it's used by major applications as 'top', 'ps', 'w', etc.... A test on a mechin (4096cpu, 256 nodes, 4592 irqs) shows %time cat /proc/stat > /dev/null Before Patch: 12.627 sec After Patch: 2.459 sec Signed-off-by:
-
Davidlohr Bueso authored
The length of the BLOCK_IPOLL string is making i's value be printed too far to the right. This patch fixes this and makes the output a bit neater. Currently: CPU0 HI: 0 TIMER: 599792 NET_TX: 2 NET_RX: 6 BLOCK: 80807 BLOCK_IOPOLL: 0 TASKLET: 20012 SCHED: 0 HRTIMER: 63 RCU: 619279 With patch: CPU0 HI: 0 TIMER: 585582 NET_TX: 2 NET_RX: 6 BLOCK: 80320 BLOCK_IOPOLL: 0 TASKLET: 19287 SCHED: 0 HRTIMER: 62 RCU: 604441 Signed-off-by:Davidlohr Bueso <dave@gnu.org> Acked-by:
Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Signed-off-by:
-
Nikanth Karthikesan authored
Document /proc/pid/pagemap in Documentation/filesystems/proc.txt Signed-off-by:
Nikanth Karthikesan <knikanth@suse.de> Cc: Richard Guenther <rguenther@suse.de> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Nikanth Karthikesan authored
Export the number of anonymous pages in a mapping via smaps. Even the private pages in a mapping backed by a file, would be marked as anonymous, when they are modified. Export this information to user-space via smaps. Exporting this count will help gdb to make a better decision on which areas need to be dumped in its coredump; and should be useful to others studying the memory usage of a process. Signed-off-by:
-
Namhyung Kim authored
find_new_reaper() releases and regrabs tasklist_lock but was missing proper annotations. Add it. This remove following sparse warning: warning: context imbalance in 'find_new_reaper' - unexpected unlock Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Acked-by:
-
Roland McGrath authored
The userland ELF tools have been coping with partial-segments core files for a few years now. Multiple distro builds are now setting this option. It behooves everyone who ever deals with core files to have more info dumped in there, especially as more and more people's compilers are producing build IDs. Make it the default. Anyone using older tools confused by these core files can configure this option off, or just change /proc/PID/coredump_filter after boot. Signed-off-by:
-
Xiaotian Feng authored
We met a parameter truncated issue, consider following: > echo "|/root/core_pattern_pipe_test %p /usr/libexec/blah-blah-blah \ %s %c %p %u %g 11 12345678901234567890123456789012345678 %t" > \ /proc/sys/kernel/core_pattern This is okay because the strings is less than CORENAME_MAX_SIZE. "cat /proc/sys/kernel/core_pattern" shows the whole string. but after we run core_pattern_pipe_test in man page, we found last parameter was truncated like below: argc[10]=<12807486> The root cause is core_pattern allows % specifiers, which need to be replaced during parse time, but the replace may expand the strings to larger than CORENAME_MAX_SIZE. So if the last parameter is % specifiers, the replace code is using snprintf(out_ptr, out_end - out_ptr, ...), this will write out of corename array. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:Xiaotian Feng <dfeng@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by:
Neil Horman <nhorman@tuxdriver.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
KOSAKI Motohiro authored
Oleg Nesterov pointed out we have to prevent multiple-threads-inside-exec itself and we can reuse ->cred_guard_mutex for it. Yes, concurrent execve() has no worth. Let's move ->cred_guard_mutex from task_struct to signal_struct. It naturally prevent multiple-threads-inside-exec. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Namhyung Kim authored
ptrace_stop() releases and regrabs current->sighand->siglock but was missing proper annotation. Add it. Signed-off-by:
-
Namhyung Kim authored
lock_task_sighand() grabs sighand->siglock in case of returning non-NULL but unlock_task_sighand() releases it unconditionally. This leads sparse to complain about the lock context imbalance. Rename and wrap lock_task_sighand() using __cond_lock() macro to make sparse happy. Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Namhyung Kim authored
Use new 'datap' variable in order to remove unnecessary castings. Signed-off-by:
-
Namhyung Kim authored
Remove unnecessary castings using void pointer and fix copy_to_user() return value. Also add missing __user markup on the argument of arch_ptrctl(). Signed-off-by:
-
Namhyung Kim authored
Remove checking @addr less than 0 because @addr is now unsigned. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Namhyung Kim authored
Factor out struct fps and remove redundant castings. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Namhyung Kim authored
Remove unnecessary castings and get rid of dummy pointer in favor of offsetof() macro in ptrace_32.c. Also use temporary variables and break long lines in order to improve readability. Signed-off-by:
-
Namhyung Kim authored
Remove unnecessary castings. Signed-off-by:
-
Namhyung Kim authored
Use new 'datavp' and 'datalp' variables in order to remove unnecessary castings. Signed-off-by:
-
Namhyung Kim authored
Add missing __user markup on the argument of put_user(). Signed-off-by:
-
