Some triggers call led_trigger_event() from their activate() callback
to initialize the brightness of the LED for which the trigger is being
activated.

In order for the LED's initial state to be set correctly this requires that
the led_trigger_event() call uses the new version of trigger->led_cdevs,
which has the new LED.

AFAICT led_trigger_event() will always use the new version when it is
running on the same CPU as where the list_add_tail_rcu() call was made,
which is why the missing synchronize_rcu() has not lead to bug reports.
But if activate() is pre-empted, sleeps or uses a worker then
the led_trigger_event() call may run on another CPU which may still use
the old trigger->led_cdevs list.

Add a synchronize_rcu() call to ensure that any led_trigger_event() calls
done from activate() always use the new list.

Triggers using led_trigger_event() from their activate() callback are:
net/bluetooth/leds.c, net/rfkill/core.c and drivers/tty/vt/keyboard.c.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531120124.75662-1-hdegoede@redhat.comSigned-off-by: Lee Jones <lee@kernel.org>

Change 'dasy-chain' to 'daisy-chain'.
Signed-off-by: Aryabhatta Dey <aryabhattadey35@gmail.com>
Link: https://lore.kernel.org/r/qpnx2m6qo5abvbs65o452gicumxa7n5vnw42e3hxnnm7sou4xn@fvu52tilzujcSigned-off-by: Lee Jones <lee@kernel.org>

Triggers which have trigger specific sysfs attributes typically store
related data in trigger-data allocated by the activate() callback and
freed by the deactivate() callback.

Calling device_remove_groups() after calling deactivate() leaves a window
where the sysfs attributes show/store functions could be called after
deactivation and then operate on the just freed trigger-data.

Move the device_remove_groups() call to before deactivate() to close
this race window.

This also makes the deactivation path properly do things in reverse order
of the activation path which calls the activate() callback before calling
device_add_groups().

Fixes: a7e7a315 ("leds: triggers: add device attribute support")
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240504162533.76780-1-hdegoede@redhat.comSigned-off-by: Lee Jones <lee@kernel.org>

'is31fl3190_regmap_config' and 'is31fl3196_regmap_config' are not modified
in this diver and are only used as a const struct regmap_config.

Constifying these structures moves some data to a read-only section, so
increase overall security.

On a x86_64, with allmodconfig:
Before:
   text	   data	    bss	    dec	    hex	filename
  13827	   2002	     32	  15861	   3df5	drivers/leds/leds-is31fl319x.o

After:
   text	   data	    bss	    dec	    hex	filename
  14467	   1370	     32	  15869	   3dfd	drivers/leds/leds-is31fl319x.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/82a5cb26ff8af1865a790286bdbc3c4a2bd149f1.1714892598.git.christophe.jaillet@wanadoo.frSigned-off-by: Lee Jones <lee@kernel.org>

Merge branches 'ib-leds-mfd-6.11', 'ib-leds-platform-power-6.11' and 'ib-mfd-leds-platform-6.11' into ibs-for-leds-merged

Add ChromeOS EC-based LED control as EC subdevice.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240613-cros_ec-led-v3-5-500b50f41e0f@weissschuh.netSigned-off-by: Lee Jones <lee@kernel.org>

The ChromeOS Embedded Controller exposes an LED control command.
Expose its functionality through the leds subsystem.

The LEDs are exposed as multicolor devices.
A hardware trigger, which is active by default, is provided to let the
EC itself take over control over the LED.

The driver is designed to be probed via the cros_ec mfd device.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240613-cros_ec-led-v3-4-500b50f41e0f@weissschuh.netSigned-off-by: Lee Jones <lee@kernel.org>

There are no external users left, make the array static.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240613-cros_ec-led-v3-3-500b50f41e0f@weissschuh.netSigned-off-by: Lee Jones <lee@kernel.org>

led_get_color_name() is a safer alternative to led_colors.

led-class-multicolor.c is the only external user of led_colors and its
removal allows unexporting the array.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240613-cros_ec-led-v3-2-500b50f41e0f@weissschuh.netSigned-off-by: Lee Jones <lee@kernel.org>

This is similar to the existing led_colors[] array but is safer to use and
usable by everyone.

Getting string representations of color ids is useful for drivers
which are handling color IDs anyways, for example for the multicolor API.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240613-cros_ec-led-v3-1-500b50f41e0f@weissschuh.netSigned-off-by: Lee Jones <lee@kernel.org>

Load cros_kbd_led_backlight when the EC reports EC_FEATURE_PWM_KEYB.
This makes cros_kbd_led_backlight work on machines without specific
ACPI or OF support for the keyboard backlight.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240526-cros_ec-kbd-led-framework-v3-4-ee577415a521@weissschuh.netSigned-off-by: Lee Jones <lee@kernel.org>

The ChromeOS EC used in Framework laptops supports the standard CrOS EC
keyboard backlight protocol.
However the firmware on these laptops doesn't implement the ACPI ID
GOOG0002 that is recognized by cros_kbd_led_backlight and they also
don't use device tree.

Prepare the existing cros_kbd_led_backlight driver to be probed through
the CrOS EC MFD device which works without ACPI or OF support.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20240526-cros_ec-kbd-led-framework-v3-3-ee577415a521@weissschuh.netSigned-off-by: Lee Jones <lee@kernel.org>

Add a mechanism for drivers to opt-out of the automatic device renaming
on conflicts.
Those drivers will provide their own conflict resolution.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240526-cros_ec-kbd-led-framework-v3-2-ee577415a521@weissschuh.netSigned-off-by: Lee Jones <lee@kernel.org>

Other warnings refer to the name after renaming, which is clearer when
that name is mentioned first.

It is also clearer where "ret" comes from.

While at it, also add the necessary newline to the message and fix the
parameter alignment.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240526-cros_ec-kbd-led-framework-v3-1-ee577415a521@weissschuh.netSigned-off-by: Lee Jones <lee@kernel.org>

Add a charging_orange_full_green LED trigger and the trigger is based on
led_mc_trigger_event() which can set an RGB LED when the trigger is
triggered. The LED will show orange when the battery status is charging.
The LED will show green when the battery status is full.

Link: https://lore.kernel.org/linux-leds/f40a0b1a-ceac-e269-c2dd-0158c5b4a1ad@gmail.com/Signed-off-by: Kate Hsuan <hpa@redhat.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
[hdegoede@redhat.com change color order to RGB]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531114124.45346-7-hdegoede@redhat.comSigned-off-by: Lee Jones <lee@kernel.org>

Add a new led_mc_trigger_event() function for triggers which want to
change the color of a multi-color LED based on their trigger conditions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531114124.45346-6-hdegoede@redhat.comSigned-off-by: Lee Jones <lee@kernel.org>

Add a new led_mc_set_brightness() function for in kernel color/brightness
changing of multi-color LEDs.

led-class-multicolor can be build as a module and led_mc_set_brightness()
will have the builtin callers, so put led_mc_set_brightness() inside
led-core instead, just like how led_set_brightness() is part of the core
and not of the led-class object.

This also adds a new LED_MULTI_COLOR led_classdev flag to allow
led_mc_set_brightness() to verify that it is operating on a multi-color
LED classdev, avoiding casting the passed in LED classdev to a multi-color
LED classdev, when it actually is not a multi-color LED.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531114124.45346-5-hdegoede@redhat.comSigned-off-by: Lee Jones <lee@kernel.org>

The mutex must be initialized before the LED class device is registered
otherwise there is a race where it may get used before it is initialized:

 DEBUG_LOCKS_WARN_ON(lock->magic != lock)
 WARNING: CPU: 2 PID: 2045 at kernel/locking/mutex.c:587 __mutex_lock
 ...
 RIP: 0010:__mutex_lock+0x7db/0xc10
 ...
 set_brightness_delayed_set_brightness.part.0+0x17/0x60
 set_brightness_delayed+0xf1/0x100
 process_one_work+0x222/0x5a0

Move the mutex_init() call earlier to avoid this race condition and
switch to devm_mutex_init() to avoid the need to add error-exit
cleanup to probe() if probe() fails later on.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531114124.45346-4-hdegoede@redhat.comSigned-off-by: Lee Jones <lee@kernel.org>

Add an i2c_device_id id_table to match manually instantiated
(non device-tree / ACPI instantiated) KTD202x controllers as
found on some x86 boards.

This table shows the maximum support LED channel for KTD2026
(three LEDs) and KTD-2027 (4 LEDs).

Link: https://www.kinet-ic.com/uploads/KTD2026-7-04h.pdfSigned-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531114124.45346-3-hdegoede@redhat.comSigned-off-by: Lee Jones <lee@kernel.org>

This LED controller is installed on a Xiaomi pad2 and it is an x86
platform. The original driver is based on the device tree and can't be
used for this ACPI based system. This patch migrated the driver to use
fwnode to access the properties. Moreover, the fwnode API supports the
device tree so this work won't affect the original implementations.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Tested-by: André Apitzsch <git@apitzsch.eu> # on BQ Aquaris M5
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531114124.45346-2-hdegoede@redhat.comSigned-off-by: Lee Jones <lee@kernel.org>

percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.

This fixes a randconfig build error on mips:

  include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
  include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc2 ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tool fix from Arnaldo Carvalho de Melo:
 "Revert a patch causing a regression.

  This made a simple 'perf record -e cycles:pp make -j199' stop working
  on the Ampere ARM64 system Linus uses to test ARM64 kernels".

* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"

This reverts commit 617824a7.

This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.

The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull smb client fixes from Steve French:

 - two important netfs integration fixes - including for a data
   corruption and also fixes for multiple xfstests

 - reenable swap support over SMB3

* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix missing set of remote_i_size
  cifs: Fix smb3_insert_range() to move the zero_point
  cifs: update internal version number
  smb3: reenable swapfiles over SMB3 mounts

Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "16 hotfixes, 11 of which are cc:stable.

  A few nilfs2 fixes, the remainder are for MM: a couple of selftests
  fixes, various singletons fixing various issues in various parts"

* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/ksm: fix possible UAF of stable_node
  mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
  mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
  nilfs2: fix potential hang in nilfs_detach_log_writer()
  nilfs2: fix unexpected freezing of nilfs_segctor_sync()
  nilfs2: fix use-after-free of timer for log writer thread
  selftests/mm: fix build warnings on ppc64
  arm64: patching: fix handling of execmem addresses
  selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
  selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
  selftests/mm: compaction_test: fix bogus test success on Aarch64
  mailmap: update email address for Satya Priya
  mm/huge_memory: don't unpoison huge_zero_folio
  kasan, fortify: properly rename memintrinsics
  lib: add version into /proc/allocinfo output
  mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL

Pull irq fixes from Ingo Molnar:

 - Fix x86 IRQ vector leak caused by a CPU offlining race

 - Fix build failure in the riscv-imsic irqchip driver
   caused by an API-change semantic conflict

 - Fix use-after-free in irq_find_at_or_after()

* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
  genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
  irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict

Pull x86 fixes from Ingo Molnar:

 - Fix regressions of the new x86 CPU VFM (vendor/family/model)
   enumeration/matching code

 - Fix crash kernel detection on buggy firmware with
   non-compliant ACPI MADT tables

 - Address Kconfig warning

* tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
  crypto: x86/aes-xts - switch to new Intel CPU model defines
  x86/topology: Handle bogus ACPI tables correctly
  x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y

Pull ipmi updates from Corey Minyard:
 "Mostly updates for deprecated interfaces, platform.remove and
  converting from a tasklet to a BH workqueue.

  Also use HAS_IOPORT for disabling inb()/outb()"

* tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void
  ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void
  ipmi: ipmi_ssif: Convert to platform remove callback returning void
  ipmi: ipmi_si_platform: Convert to platform remove callback returning void
  ipmi: ipmi_powernv: Convert to platform remove callback returning void
  ipmi: bt-bmc: Convert to platform remove callback returning void
  char: ipmi: handle HAS_IOPORT dependencies
  ipmi: Convert from tasklet to BH workqueue

Pull ceph updates from Ilya Dryomov:
 "A series from Xiubo that adds support for additional access checks
  based on MDS auth caps which were recently made available to clients.

  This is needed to prevent scenarios where the MDS quietly discards
  updates that a UID-restricted client previously (wrongfully) acked to
  the user.

  Other than that, just a documentation fixup"

* tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client:
  doc: ceph: update userspace command to get CephFS metadata
  ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit
  ceph: check the cephx mds auth access for async dirop
  ceph: check the cephx mds auth access for open
  ceph: check the cephx mds auth access for setattr
  ceph: add ceph_mds_check_access() helper
  ceph: save cap_auths in MDS client when session is opened

Pull ntfs3 updates from Konstantin Komarov:
 "Fixes:
   - reusing of the file index (could cause the file to be trimmed)
   - infinite dir enumeration
   - taking DOS names into account during link counting
   - le32_to_cpu conversion, 32 bit overflow, NULL check
   - some code was refactored

  Changes:
   - removed max link count info display during driver init

  Remove:
   - atomic_open has been removed for lack of use"

* tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3:
  fs/ntfs3: Break dir enumeration if directory contents error
  fs/ntfs3: Fix case when index is reused during tree transformation
  fs/ntfs3: Mark volume as dirty if xattr is broken
  fs/ntfs3: Always make file nonresident on fallocate call
  fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode
  fs/ntfs3: Use variable length array instead of fixed size
  fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow
  fs/ntfs3: Check 'folio' pointer for NULL
  fs/ntfs3: Missed le32_to_cpu conversion
  fs/ntfs3: Remove max link count info display during driver init
  fs/ntfs3: Taking DOS names into account during link counting
  fs/ntfs3: remove atomic_open
  fs/ntfs3: use kcalloc() instead of kzalloc()

Pull smb server fixes from Steve French:
 "Two ksmbd server fixes, both for stable"

* tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: ignore trailing slashes in share paths
  ksmbd: avoid to send duplicate oplock break notifications

Pull RTC updates from Alexandre Belloni:
 "There is one new driver and then most of the changes are the device
  tree bindings conversions to yaml.

  New driver:
   - Epson RX8111

  Drivers:
   - Many Device Tree bindings conversions to dtschema
   - pcf8563: wakeup-source support"

* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  pcf8563: add wakeup-source support
  rtc: rx8111: handle VLOW flag
  rtc: rx8111: demote warnings to debug level
  rtc: rx6110: Constify struct regmap_config
  dt-bindings: rtc: convert trivial devices into dtschema
  dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
  dt-bindings: rtc: pxa-rtc: convert to dtschema
  rtc: Add driver for Epson RX8111
  dt-bindings: rtc: Add Epson RX8111
  rtc: mcp795: drop unneeded MODULE_ALIAS
  rtc: nuvoton: Modify part number value
  rtc: test: Split rtc unit test into slow and normal speed test
  dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
  dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
  dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
  dt-bindings: rtc: armada-380-rtc: convert to dtschema
  rtc: cros-ec: provide ID table for avoiding fallback match

Pull i3c updates from Alexandre Belloni:
 "Runtime PM (power management) is improved and hot-join support has
  been added to the dw controller driver.

  Core:
   - Allow device driver to trigger controller runtime PM

  Drivers:
   - dw: hot-join support
   - svc: better IBI handling"

* tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: dw: Add hot-join support.
  i3c: master: Enable runtime PM for master controller
  i3c: master: svc: fix invalidate IBI type and miss call client IBI handler
  i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame
  i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()

Pull jffs2 updates from Richard Weinberger:

 - Fix illegal memory access in jffs2_free_inode()

 - Kernel-doc fixes

 - print symbolic error names

* tag 'jffs2-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  jffs2: Fix potential illegal address access in jffs2_free_inode
  jffs2: Simplify the allocation of slab caches
  jffs2: nodemgmt: fix kernel-doc comments
  jffs2: print symbolic error name instead of error code

Pull UML updates from Richard Weinberger:

 - Fixes for -Wmissing-prototypes warnings and further cleanup

 - Remove callback returning void from rtc and virtio drivers

 - Fix bash location

* tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (26 commits)
  um: virtio_uml: Convert to platform remove callback returning void
  um: rtc: Convert to platform remove callback returning void
  um: Remove unused do_get_thread_area function
  um: Fix -Wmissing-prototypes warnings for __vdso_*
  um: Add an internal header shared among the user code
  um: Fix the declaration of kasan_map_memory
  um: Fix the -Wmissing-prototypes warning for get_thread_reg
  um: Fix the -Wmissing-prototypes warning for __switch_mm
  um: Fix -Wmissing-prototypes warnings for (rt_)sigreturn
  um: Stop tracking host PID in cpu_tasks
  um: process: remove unused 'n' variable
  um: vector: remove unused len variable/calculation
  um: vector: fix bpfflash parameter evaluation
  um: slirp: remove set but unused variable 'pid'
  um: signal: move pid variable where needed
  um: Makefile: use bash from the environment
  um: Add winch to winch_handlers before registering winch IRQ
  um: Fix -Wmissing-prototypes warnings for __warp_* and foo
  um: Fix -Wmissing-prototypes warnings for text_poke*
  um: Move declarations to proper headers
  ...

Pull drm fixes from Dave Airlie:
 "Some fixes for the end of the merge window, mostly amdgpu and panthor,
  with one nouveau uAPI change that fixes a bad decision we made a few
  months back.

  nouveau:
   - fix bo metadata uAPI for vm bind

  panthor:
   - Fixes for panthor's heap logical block.
   - Reset on unrecoverable fault
   - Fix VM references.
   - Reset fix.

  xlnx:
   - xlnx compile and doc fixes.

  amdgpu:
   - Handle vbios table integrated info v2.3

  amdkfd:
   - Handle duplicate BOs in reserve_bo_and_cond_vms
   - Handle memory limitations on small APUs

  dp/mst:
   - MST null deref fix.

  bridge:
   - Don't let next bridge create connector in adv7511 to make probe
     work"

* tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel:
  drm/amdgpu/atomfirmware: add intergrated info v2.3 table
  drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
  drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs
  drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms
  drm/bridge: adv7511: Attach next bridge without creating connector
  drm/buddy: Fix the warn on's during force merge
  drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations
  drm/panthor: Call panthor_sched_post_reset() even if the reset failed
  drm/panthor: Reset the FW VM to NULL on unplug
  drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level
  drm/panthor: Force an immediate reset on unrecoverable faults
  drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints
  drm/panthor: Fix an off-by-one in the heap context retrieval logic
  drm/panthor: Relax the constraints on the tiler chunk size
  drm/panthor: Make sure the tiler initial/max chunks are consistent
  drm/panthor: Fix tiler OOM handling to allow incremental rendering
  drm: xlnx: zynqmp_dpsub: Fix compilation error
  drm: xlnx: zynqmp_dpsub: Fix few function comments

Occasionally, the generic/001 xfstest will fail indicating corruption in
one of the copy chains when run on cifs against a server that supports
FSCTL_DUPLICATE_EXTENTS_TO_FILE (eg. Samba with a share on btrfs).  The
problem is that the remote_i_size value isn't updated by cifs_setsize()
when called by smb2_duplicate_extents(), but i_size *is*.

This may cause cifs_remap_file_range() to then skip the bit after calling
->duplicate_extents() that sets sizes.

Fix this by calling netfs_resize_file() in smb2_duplicate_extents() before
calling cifs_setsize() to set i_size.

This means we don't then need to call netfs_resize_file() upon return from
->duplicate_extents(), but we also fix the test to compare against the pre-dup
inode size.

[Note that this goes back before the addition of remote_i_size with the
netfs_inode struct.  It should probably have been setting cifsi->server_eof
previously.]

Fixes: cfc63fc8 ("smb3: fix cached file size problems in duplicate extents (reflink)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>

Fix smb3_insert_range() to move the zero_point over to the new EOF.
Without this, generic/147 fails as reads of data beyond the old EOF point
return zeroes.

Fixes: 3ee1a1fc ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull more mm updates from Andrew Morton:
 "Jeff Xu's implementation of the mseal() syscall"

* tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  selftest mm/mseal read-only elf memory segment
  mseal: add documentation
  selftest mm/mseal memory sealing
  mseal: add mseal syscall
  mseal: wire up mseal syscall