- 01 May, 2018 4 commits
-
-
Theodore Ts'o authored
commit 7dac4a17 upstream. An privileged attacker can cause a crash by mounting a crafted ext4 image which triggers a out-of-bounds read in the function ext4_valid_block_bitmap() in fs/ext4/balloc.c. This issue has been assigned CVE-2018-1093. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199181 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1560782Reported-by:
Wen Xu <wen.xu@gatech.edu> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit 7ef79ad5 upstream. Fixes: a45403b5 ("ext4: always initialize the crc32c checksum driver") Reported-by:
François Valenduc <francoisvalenduc@gmail.com> Signed-off-by:
-
Theodore Ts'o authored
commit b2569260 upstream. If ext4 tries to start a reserved handle via jbd2_journal_start_reserved(), and the journal has been aborted, this can result in a NULL pointer dereference. This is because the fields h_journal and h_transaction in the handle structure share the same memory, via a union, so jbd2_journal_start_reserved() will clear h_journal before calling start_this_handle(). If this function fails due to an aborted handle, h_journal will still be NULL, and the call to jbd2_journal_free_reserved() will pass a NULL journal to sub_reserve_credits(). This can be reproduced by running "kvm-xfstests -c dioread_nolock generic/475". Cc: stable@kernel.org # 3.11 Fixes: 8f7d89f3 ("jbd2: transaction reservation support") Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Eric Biggers authored
commit 349fa7d6 upstream. During the "insert range" fallocate operation, extents starting at the range offset are shifted "right" (to a higher file offset) by the range length. But, as shown by syzbot, it's not validated that this doesn't cause extents to be shifted beyond EXT_MAX_BLOCKS. In that case ->ee_block can wrap around, corrupting the extent tree. Fix it by returning an error if the space between the end of the last extent and EXT4_MAX_BLOCKS is smaller than the range being inserted. This bug can be reproduced by running the following commands when the current directory is on an ext4 filesystem with a 4k block size: fallocate -l 8192 file fallocate --keep-size -o 0xfffffffe000 -l 4096 -n file fallocate --insert-range -l 8192 file Then after unmounting the filesystem, e2fsck reports corruption. Reported-by: syzbot+06c885be0edcdaeab40c@syzkaller.appspotmail.com Fixes: 331573fe ("ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
- 29 Apr, 2018 36 commits
-
-
Greg Kroah-Hartman authored
-
Hans de Goede authored
commit 53fa1f6e upstream. Commit 5928c281 (ACPI / video: Default lcd_only to true on Win8-ready and newer machines) made only_lcd default to true on all machines where acpi_osi_is_win8() returns true, including laptops. The purpose of this is to avoid the bogus / non-working acpi backlight interface which many newer BIOS-es define on desktop machines. But this is causing a regression on some laptops, specifically on the Dell XPS 13 2013 model, which does not have the LCD flag set for its fully functional ACPI backlight interface. Rather then DMI quirking our way out of this, this commits changes the logic for setting only_lcd to true, to only do this on machines with a desktop (or server) dmi chassis-type. Note that we cannot simply only check the chassis-type and not register the backlight interface based on that as there are some laptops and tablets which have their chassis-type set to "3" aka desktop. Hopefully the combination of checking the LCD flag, but only on devices with a desktop(ish) chassis-type will avoid the needs for DMI quirks for this, or at least limit the amount of DMI quirks which we need to a minimum. Fixes: 5928c281 (ACPI / video: Default lcd_only to true on Win8-ready and newer machines) Reported-and-tested-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Heiko Carstens authored
commit 783c3b53 upstream. Implement s390 specific arch_uretprobe_is_alive() to avoid SIGSEGVs observed with uretprobes in combination with setjmp/longjmp. See commit 2dea1d9c ("powerpc/uprobes: Implement arch_uretprobe_is_alive()") for more details. With this implemented all test cases referenced in the above commit pass. Reported-by:
Ziqian SUN <zsun@redhat.com> Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
commit 5d27a2bf upstream. When a new CKD storage volume is defined at the storage server, Linux may be relying on outdated information about that volume, which leads to the following errors: 1. Command Reject Errors for minidisk on z/VM: dasd-eckd.b3193d: 0.0.XXXX: An error occurred in the DASD device driver, reason=09 dasd(eckd): I/O status report for device 0.0.XXXX: dasd(eckd): in req: 00000000XXXXXXXX CC:00 FC:04 AC:00 SC:17 DS:02 CS:00 RC:0 dasd(eckd): device 0.0.2046: Failing CCW: 00000000XXXXXXXX dasd(eckd): Sense(hex) 0- 7: 80 00 00 00 00 00 00 00 dasd(eckd): Sense(hex) 8-15: 00 00 00 00 00 00 00 00 dasd(eckd): Sense(hex) 16-23: 00 00 00 00 e1 00 0f 00 dasd(eckd): Sense(hex) 24-31: 00 00 40 e2 00 00 00 00 dasd(eckd): 24 Byte: 0 MSG 0, no MSGb to SYSOP 2. Equipment Check errors on LPAR or for dedicated devices on z/VM: dasd(eckd): I/O status report for device 0.0.XXXX: dasd(eckd): in req: 00000000XXXXXXXX CC:00 FC:04 AC:00 SC:17 DS:0E CS:40 fcxs:01 schxs:00 RC:0 dasd(eckd): device 0.0.9713: Failing TCW: 00000000XXXXXXXX dasd(eckd): Sense(hex) 0- 7: 10 00 00 00 13 58 4d 0f dasd(eckd): Sense(hex) 8-15: 67 00 00 00 00 00 00 04 dasd(eckd): Sense(hex) 16-23: e5 18 05 33 97 01 0f 0f dasd(eckd): Sense(hex) 24-31: 00 00 40 e2 00 04 58 0d dasd(eckd): 24 Byte: 0 MSG f, no MSGb to SYSOP Fix this problem by using the up-to-date information provided during online processing via the device specific SNEQ to detect the case of outdated LCU data. If there is a difference, perform a re-read of that data. Cc: stable@vger.kernel.org Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
commit af2e460a upstream. Channel path descriptors have been seen as something stable (as long as the chpid is configured). Recent tests have shown that the descriptor can also be altered when the link state of a channel path changes. Thus it is necessary to update the descriptor during handling of resource accessibility events. Cc: <stable@vger.kernel.org> Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Reviewed-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
-
Peter Xu authored
commit 9a0fd675 upstream. It's been missing for a while but no one is touching that up. Fix it. Link: http://lkml.kernel.org/r/20180315060639.9578-1-peterx@redhat.com CC: Ingo Molnar <mingo@kernel.org> Cc:stable@vger.kernel.org Fixes: 7b2c8625 ("tracing: Add NMI tracing in hwlat detector") Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Finn Thain authored
commit 5a13388d upstream. Reading to the end of a 720K disk results in an IO error instead of EOF because the block layer thinks the disk has 2880 sectors. (Partly this is a result of inverted logic of the ONEMEG_MEDIA bit that's now fixed.) Initialize the density and head count in swim_add_floppy() to agree with the device size passed to set_capacity() during drive probe. Call set_capacity() again upon device open, after refreshing the density and head count values. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Finn Thain authored
commit 7ae6a2b6 upstream. In the floppy_find() function in swim.c is a call to get_disk(swd->unit[drive].disk). The actual parameter to this call can be a NULL pointer when drive == swd->floppy_count. This causes an oops in get_disk(). Data read fault at 0x00000198 in Super Data (pc=0x1be5b6) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: swim_mod ipv6 mac8390 PC: [<001be5b6>] get_disk+0xc/0x76 SR: 2004 SP: 9a078bc1 a2: 0213ed90 d0: 00000000 d1: 00000000 d2: 00000000 d3: 000000ff d4: 00000002 d5: 02983590 a0: 02332e00 a1: 022dfd64 Process dd (pid: 285, task=020ab25b) Frame format=B ssw=074d isc=4a88 isb=6732 daddr=00000198 dobuf=00000000 baddr=001be5bc dibuf=bfffffff ver=f Stack from 022dfca4: 00000000 0203fc00 0213ed90 022dfcc0 02982936 00000000 00200000 022dfd08 0020f85a 00200000 022dfd64 02332e00 004040fc 00000014 001be77e 022dfd64 00334e4a 001be3f8 0800001d 022dfd64 01c04b60 01c04b70 022aba80 029828f8 02332e00 022dfd2c 001be7ac 0203fc00 00200000 022dfd64 02103a00 01c04b60 01c04b60 0200e400 022dfd68 000e191a 00200000 022dfd64 02103a00 0800001d 00000000 00000003 000b89de 00500000 02103a00 01c04b60 02103a08 01c04c2e Call Trace: [<02982936>] floppy_find+0x3e/0x4a [swim_mod] [<00200000>] uart_remove_one_port+0x1a2/0x260 [<0020f85a>] kobj_lookup+0xde/0x132 [<00200000>] uart_remove_one_port+0x1a2/0x260 [<001be77e>] get_gendisk+0x0/0x130 [<00334e4a>] mutex_lock+0x0/0x2e [<001be3f8>] disk_block_events+0x0/0x6c [<029828f8>] floppy_find+0x0/0x4a [swim_mod] [<001be7ac>] get_gendisk+0x2e/0x130 [<00200000>] uart_remove_one_port+0x1a2/0x260 [<000e191a>] __blkdev_get+0x32/0x45a [<00200000>] uart_remove_one_port+0x1a2/0x260 [<000b89de>] complete_walk+0x0/0x8a [<000e1e22>] blkdev_get+0xe0/0x29a [<000e1fdc>] blkdev_open+0x0/0xb0 [<000b89de>] complete_walk+0x0/0x8a [<000e1fdc>] blkdev_open+0x0/0xb0 [<000e01cc>] bd_acquire+0x74/0x8a [<000e205c>] blkdev_open+0x80/0xb0 [<000e1fdc>] blkdev_open+0x0/0xb0 [<000abf24>] do_dentry_open+0x1a4/0x322 [<00020000>] __do_proc_douintvec+0x22/0x27e [<000b89de>] complete_walk+0x0/0x8a [<000baa62>] link_path_walk+0x0/0x48e [<000ba3f8>] inode_permission+0x20/0x54 [<000ac0e4>] vfs_open+0x42/0x78 [<000bc372>] path_openat+0x2b2/0xeaa [<000bc0c0>] path_openat+0x0/0xeaa [<0004463e>] __irq_wake_thread+0x0/0x4e [<0003a45a>] task_tick_fair+0x18/0xc8 [<000bd00a>] do_filp_open+0xa0/0xea [<000abae0>] do_sys_open+0x11a/0x1ee [<00020000>] __do_proc_douintvec+0x22/0x27e [<000abbf4>] SyS_open+0x1e/0x22 [<00020000>] __do_proc_douintvec+0x22/0x27e [<00002b40>] syscall+0x8/0xc [<00020000>] __do_proc_douintvec+0x22/0x27e [<0000c00b>] dyadic+0x1/0x28 Code: 4e5e 4e75 4e56 fffc 2f0b 2f02 266e 0008 <206b> 0198 4a88 6732 2428 002c 661e 486b 0058 4eb9 0032 0b96 588f 4a88 672c 2008 Disabling lock debugging due to kernel taint Fix the array index bounds check to avoid this. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Fixes: 8852ecd9 ("[PATCH] m68k: mac - Add SWIM floppy support") Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Finn Thain authored
commit b3906535 upstream. The driver supports internal and external FDD units so the floppy_open function must not hard-code the drive location. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
commit 56a1c5ee upstream. The Sony drive status bits use active-low logic. The swim_readbit() function converts that to 'C' logic for readability. Hence, the sense of the names of the status bit macros should not be inverted. Mostly they are correct. However, the TWOMEG_DRIVE, MFM_MODE and TWOMEG_MEDIA macros have inverted sense (like MkLinux). Fix this inconsistency and make the following patches less confusing. The same problem affects swim3.c so fix that too. No functional change. The FDHD drive status bits are documented in sonydriv.cpp from MAME and in swimiii.h from MkLinux. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
commit c1d6207c upstream. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Fixes: 103db8b2 ("[PATCH] swim: stop sharing request queue across multiple gendisks") Tested-by:
-
Finn Thain authored
commit 8e2ab5a4 upstream. The 'eject' shell command may send various different ioctl commands. This leads to error messages on the console even though the FDEJECT ioctl succeeds. ~# eject floppy SWIM floppy_ioctl: unknown cmd 21257 SWIM floppy_ioctl: unknown cmd 1 Don't log an error message for an invalid ioctl, just do as the swim3 driver does and return -ENOTTY. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
commit 8a500df6 upstream. The SWIM chip is compatible with GCR-mode Sony 400K/800K drives but this driver only supports MFM mode. Therefore only Sony FDHD drives are supported. Skip incompatible drives. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
commit b64576cb upstream. For reasons I don't understand, calling ioremap() then iounmap() on the SWIM MMIO region causes a hang on 68030 (but not on 68040). ~# modprobe swim_mod SWIM floppy driver Version 0.2 (2008-10-30) SWIM device not found ! watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:285] Modules linked in: swim_mod(+) Format 00 Vector: 0064 PC: 000075aa Status: 2000 Not tainted ORIG_D0: ffffffff D0: d00c0000 A2: 007c2370 A1: 003f810c A0: 00040000 D5: d0096800 D4: d0097e00 D3: 00000001 D2: 00000003 D1: 00000000 Non-Maskable Interrupt Modules linked in: swim_mod(+) PC: [<000075ba>] __iounmap+0x24/0x10e SR: 2000 SP: 007abc48 a2: 007c2370 d0: d00c0000 d1: 000001a0 d2: 00000019 d3: 00000001 d4: d0097e00 d5: d0096800 a0: 00040000 a1: 003f810c Process modprobe (pid: 285, task=007c2370) Frame format=0 Stack from 007abc7c: ffffffed 00000000 006a4060 004712e0 007abca0 000076ea d0080000 00080000 010bb4b8 007abcd8 010ba542 d0096000 00000000 00000000 00000001 010bb59c 00000000 007abf30 010bb4b8 0047760a 0047763c 00477612 00616540 007abcec 0020a91a 00477600 0047760a 010bb4cc 007abd18 002092f2 0047760a 00333b06 007abd5c 00000000 0047760a 010bb4cc 00404f90 004776b8 00000001 007abd38 00209446 010bb4cc 0047760a 010bb4cc 0020938e 0031f8be 00616540 007abd64 Call Trace: [<000076ea>] iounmap+0x46/0x5a [<00080000>] shrink_page_list+0x7f6/0xe06 [<010ba542>] swim_probe+0xe4/0x496 [swim_mod] [<0020a91a>] platform_drv_probe+0x20/0x5e [<002092f2>] driver_probe_device+0x21c/0x2b8 [<00333b06>] mutex_lock+0x0/0x2e [<00209446>] __driver_attach+0xb8/0xce [<0020938e>] __driver_attach+0x0/0xce [<0031f8be>] klist_next+0x0/0xa0 [<00207562>] bus_for_each_dev+0x74/0xba [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<00333b06>] mutex_lock+0x0/0x2e [<00208e44>] driver_attach+0x1a/0x1e [<0020938e>] __driver_attach+0x0/0xce [<00207e26>] bus_add_driver+0x188/0x234 [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<00209894>] driver_register+0x58/0x104 [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<010bd000>] swim_init+0x0/0x2c [swim_mod] [<0020a7be>] __platform_driver_register+0x38/0x3c [<010bd028>] swim_init+0x28/0x2c [swim_mod] [<000020dc>] do_one_initcall+0x38/0x196 [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<00075008>] __free_pages+0x0/0x38 [<000045c0>] mangle_kernel_stack+0x30/0xda [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<0005ced4>] do_init_module+0x42/0x266 [<010bd000>] swim_init+0x0/0x2c [swim_mod] [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<0005eda0>] load_module+0x1a30/0x1e70 [<0000465d>] mangle_kernel_stack+0xcd/0xda [<00331c64>] __generic_copy_from_user+0x0/0x46 [<0033256e>] _cond_resched+0x0/0x32 [<00331b9c>] memset+0x0/0x98 [<0033256e>] _cond_resched+0x0/0x32 [<0005f25c>] SyS_init_module+0x7c/0x112 [<00002000>] _start+0x0/0x8 [<00002000>] _start+0x0/0x8 [<00331c82>] __generic_copy_from_user+0x1e/0x46 [<0005f2b2>] SyS_init_module+0xd2/0x112 [<0000465d>] mangle_kernel_stack+0xcd/0xda [<00002b40>] syscall+0x8/0xc [<0000465d>] mangle_kernel_stack+0xcd/0xda [<0008c00c>] pcpu_balance_workfn+0xb2/0x40e Code: 2200 7419 e4a9 e589 2841 d9fc 0000 1000 <2414> 7203 c282 7602 b681 6600 0096 0242 fe00 0482 0000 0000 e9c0 11c3 ed89 2642 There's no need to call ioremap() for the SWIM address range, as it lies within the usual IO device region at 0x5000 0000, which has already been mapped by head.S. Remove the redundant ioremap() and iounmap() calls to fix the hang. Cc: Laurent Vivier <lvivier@redhat.com> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Robert Kolchmeyer authored
commit d90a10e2 upstream. fsnotify() acquires a reference to a fsnotify_mark_connector through the SRCU-protected pointer to_tell->i_fsnotify_marks. However, it appears that no precautions are taken in fsnotify_put_mark() to ensure that fsnotify() drops its reference to this fsnotify_mark_connector before assigning a value to its 'destroy_next' field. This can result in fsnotify_put_mark() assigning a value to a connector's 'destroy_next' field right before fsnotify() tries to traverse the linked list referenced by the connector's 'list' field. Since these two fields are members of the same union, this behavior results in a kernel panic. This issue is resolved by moving the connector's 'destroy_next' field into the object pointer union. This should work since the object pointer access is protected by both a spinlock and the value of the 'flags' field, and the 'flags' field is cleared while holding the spinlock in fsnotify_put_mark() before 'destroy_next' is updated. It shouldn't be possible for another thread to accidentally read from the object pointer after the 'destroy_next' field is updated. The offending behavior here is extremely unlikely; since fsnotify_put_mark() removes references to a connector (specifically, it ensures that the connector is unreachable from the inode it was formerly attached to) before updating its 'destroy_next' field, a sizeable chunk of code in fsnotify_put_mark() has to execute in the short window between when fsnotify() acquires the connector reference and saves the value of its 'list' field. On the HEAD kernel, I've only been able to reproduce this by inserting a udelay(1) in fsnotify(). However, I've been able to reproduce this issue without inserting a udelay(1) anywhere on older unmodified release kernels, so I believe it's worth fixing at HEAD. References: https://bugzilla.kernel.org/show_bug.cgi?id=199437 Fixes: 08991e83 CC: stable@vger.kernel.org Signed-off-by:
Robert Kolchmeyer <rkolchmeyer@google.com> Signed-off-by:
-
Dan Carpenter authored
commit 9de4ee40 upstream. This cast is wrong. "cdi->capacity" is an int and "arg" is an unsigned long. The way the check is written now, if one of the high 32 bits is set then we could read outside the info->slots[] array. This bug is pretty old and it predates git. Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Martin K. Petersen authored
commit 94e5395d upstream. First generation MPT Fusion controllers can not translate WRITE SAME when the attached device is a SATA drive. Disable WRITE SAME support. Reported-by:
Nikola Ciprich <nikola.ciprich@linuxbox.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tetsuo Handa authored
commit 1f578172 upstream. syzbot is reporting NULL pointer dereference at xattr_getsecurity() [1], for cap_inode_getsecurity() is returning sizeof(struct vfs_cap_data) when memory allocation failed. Return -ENOMEM if memory allocation failed. [1] https://syzkaller.appspot.com/bug?id=a55ba438506fe68649a5f50d2d82d56b365e0107Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 8db6c34f ("Introduce v3 namespaced file capabilities") Reported-by:
syzbot <syzbot+9369930ca44f29e60e2d@syzkaller.appspotmail.com> Cc: stable <stable@vger.kernel.org> # 4.14+ Acked-by:
Serge E. Hallyn <serge@hallyn.com> Acked-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 25df8b83e867dcfb660123e9589ebf6f094fcdd3 which is commit b28b08de upstream. There are still build errors with this patch applied, and the upstream patches do not seem to apply anymore, so reverting this patch seems like the best thing to do at this point in time. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Михаил Носов <drdeimosnn@gmail.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Klaus Goger authored
commit 87eba071 upstream. vdd_log has no consumer and therefore will not be set to a specific voltage. Still the PWM output pin gets configured and thence the vdd_log output voltage will changed from it's default. Depending on the idle state of the PWM this will slightly over or undervoltage the logic supply of the RK3399 and cause instability with GbE (undervoltage) and PCIe (overvoltage). Since the default value set by a voltage divider is the correct supply voltage and we don't need to change it during runtime we remove the rail from the devicetree completely so the PWM pin will not be configured. Signed-off-by:
Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Signed-off-by:
-
Michal Simek authored
commit 18ffc0cc upstream. The patch: "microblaze: Setup proper dependency for optimized lib functions" (sha1: 7b6ce52b) didn't setup all dependencies properly. Optimized lib functions in C are also present for little endian and optimized library functions in assembler are implemented only for big endian version. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 6cf09958 ] The main linker script vmlinux.lds.S for the kernel image merges the expoline code patch tables into two section ".nospec_call_table" and ".nospec_return_table". This is *not* done for the modules, there the sections retain their original names as generated by gcc: ".s390_indirect_call", ".s390_return_mem" and ".s390_return_reg". The module_finalize code has to check for the compiler generated section names, otherwise no code patching is done. This slows down the module code in case of "spectre_v2=off". Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 6a3d1e81 ] With CONFIG_EXPOLINE_AUTO=y the call of spectre_v2_auto_early() via early_initcall is done *after* the early_param functions. This overwrites any settings done with the nobp/no_spectre_v2/spectre_v2 parameters. The code patching for the kernel is done after the evaluation of the early parameters but before the early_initcall is done. The end result is a kernel image that is patched correctly but the kernel modules are not. Make sure that the nospec auto detection function is called before the early parameters are evaluated and before the code patching is done. Fixes: 6e179d64 ("s390: add automatic detection of the spectre defense") Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit d424986f ] Set CONFIG_GENERIC_CPU_VULNERABILITIES and provide the two functions cpu_show_spectre_v1 and cpu_show_spectre_v2 to report the spectre mitigations. Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit bc035599 ] Add a boot message if either of the spectre defenses is active. The message is "Spectre V2 mitigation: execute trampolines." or "Spectre V2 mitigation: limited branch prediction." Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 6e179d64 ] Automatically decide between nobp vs. expolines if the spectre_v2=auto kernel parameter is specified or CONFIG_EXPOLINE_AUTO=y is set. The decision made at boot time due to CONFIG_EXPOLINE_AUTO=y being set can be overruled with the nobp, nospec and spectre_v2 kernel parameters. Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit b2e2f43a ] Keep the code for the nobp parameter handling with the code for expolines. Both are related to the spectre v2 mitigation. Signed-off-by:
-
Christian Borntraeger authored
[ Upstream commit d3f46896 ] when a system call is interrupted we might call the critical section cleanup handler that re-does some of the operations. When we are between .Lsysc_vtime and .Lsysc_do_svc we might also redo the saving of the problem state registers r0-r7: .Lcleanup_system_call: [...] 0: # update accounting time stamp mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER # set up saved register r11 lg %r15,__LC_KERNEL_STACK la %r9,STACK_FRAME_OVERHEAD(%r15) stg %r9,24(%r11) # r11 pt_regs pointer # fill pt_regs mvc __PT_R8(64,%r9),__LC_SAVE_AREA_SYNC ---> stmg %r0,%r7,__PT_R0(%r9) The problem is now, that we might have already zeroed out r0. The fix is to move the zeroing of r0 after sysc_do_svc. Reported-by:
Farhan Ali <alifm@linux.vnet.ibm.com> Fixes: 7041d281 ("s390: scrub registers on kernel entry and KVM exit") Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit d5feec04 ] The system call path can be interrupted before the switch back to the standard branch prediction with BPENTER has been done. The critical section cleanup code skips forward to .Lsysc_do_svc and bypasses the BPENTER. In this case the kernel and all subsequent code will run with the limited branch prediction. Fixes: eacf67eb9b32 ("s390: run user space and KVM guests with modified branch prediction") Signed-off-by:
-
Eugeniu Rosca authored
[ Upstream commit 2cb370d6 ] I've accidentally stumbled upon the IS_ENABLED(EXPOLINE_*) lines, which obviously always evaluate to false. Fix this. Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by:
-
Christian Borntraeger authored
[ Upstream commit f315104a ] If the guest runs with bp isolation when doing a SIE instruction, we must also run the nested guest with bp isolation when emulating that SIE instruction. This is done by activating BPBC in the lpar, which acts as an override for lower level guests. Signed-off-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit f19fbd5e ] Add CONFIG_EXPOLINE to enable the use of the new -mindirect-branch= and -mfunction_return= compiler options to create a kernel fortified against the specte v2 attack. With CONFIG_EXPOLINE=y all indirect branches will be issued with an execute type instruction. For z10 or newer the EXRL instruction will be used, for older machines the EX instruction. The typical indirect call basr %r14,%r1 is replaced with a PC relative call to a new thunk brasl %r14,__s390x_indirect_jump_r1 The thunk contains the EXRL/EX instruction to the indirect branch __s390x_indirect_jump_r1: exrl 0,0f j . 0: br %r1 The detour via the execute type instruction has a performance impact. To get rid of the detour the new kernel parameter "nospectre_v2" and "spectre_v2=[on,off,auto]" can be used. If the parameter is specified the kernel and module code will be patched at runtime. Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 6b73044b ] Define TIF_ISOLATE_BP and TIF_ISOLATE_BP_GUEST and add the necessary plumbing in entry.S to be able to run user space and KVM guests with limited branch prediction. To switch a user space process to limited branch prediction the s390_isolate_bp() function has to be call, and to run a vCPU of a KVM guest associated with the current task with limited branch prediction call s390_isolate_bp_guest(). Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit d768bd89 ] Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit cf148998 ] To be able to switch off specific CPU alternatives with kernel parameters make a copy of the facility bit mask provided by STFLE and use the copy for the decision to apply an alternative. Reviewed-by:
-
Martin Schwidefsky authored
[ Upstream commit e2dd8333 ] Add an optimized version of the array_index_mask_nospec function for s390 based on a compare and a subtract with borrow. Signed-off-by:
-
