- 26 Jun, 2024 11 commits
-
-
Laurent Pinchart authored
Finalize subdev initialization for all subdevs that provide a .init_state() operation. This creates an active state for all those subdevs, which subsequent patches will use to simplify the implementation of individual vimc entities. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
Initialize the subdev internal_ops field in the vimc_ent_sd_register() function. This handles the internal ops the same way as the subdev ops, and prepares for moving to the V4L2 subdev active state API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The vic_sca_pad enum's name has been shortened to the extreme for no good reason. Rename it to vimc_scaler_pad. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The ent_config array contains data that is never modified. Make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The vimc_ent_type structure contains static pointers to functions, and no other information that need to be modified after initialization. Make them const to avoid the risk of arbitrary code execution following an overflow that would overwrite the structure's contents. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The .init_state() operations of the debayer and sensor entities iterate over the entity's pads. In practice, the iteration covers a single pad only. Access the pad directly and remove the loops. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Hans Verkuil authored
Merge tag 'tags/next-media-20240626' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git - fix typo in v4l2-subdev.h - imx-pxp bug fix - media i2c Kconfig: add missing FW_UPLOAD select Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Hans Verkuil authored
Merge tag 'tags/next-media-renesas-20240619' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git - Conversion of max9286 and adv748x to V4L2 subdev active state - Cleanups and fixes for the Renesas R-Car VSP and VIN drivers - Miscellaneous cleanups to V4L2 core Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
Replace the incorrect reference to the v4l2_subdev_enable_stream() function with the correct v4l2_subdev_enable_streams() spelling. Fixes: d0749adb ("media: v4l2-subdev: Add subdev .(enable|disable)_streams() operations") Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20240619225343.15873-1-laurent.pinchart@ideasonboard.comSigned-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Kory Maincent authored
FW_LOADER config only selects the firmware loader API, but we also need the sysfs_upload symbols for firmware_upload_unregister() and firmware_upload_register() to function properly. Fixes: 7a52ab41 ("media: i2c: Add driver for THine THP7312") Cc: stable@vger.kernel.org Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Link: https://lore.kernel.org/r/20240620102544.1918105-1-kory.maincent@bootlin.comSigned-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Harshit Mogalapalli authored
devm_regmap_init_mmio() can fail, add a check and bail out in case of error. Fixes: 4e5bd3fd ("media: imx-pxp: convert to regmap") Cc: stable@vger.kernel.org Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240514095038.3464191-1-harshit.m.mogalapalli@oracle.comSigned-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
- 24 Jun, 2024 13 commits
-
-
Wolfram Sang authored
The email address bounced. I couldn't find a newer one in recent git history, so update MAINTAINERS accordingly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Samuel Wein authored
Fix flags in X1 Yoga example. MEDIA_LNK_FL_DYNAMIC (0x4 in the link flag) was removed in V4 Intel IPU6 and IPU6 input system drivers. Added -V flag to media-ctl commands for X1 Yoga, lower-case v only makes it verbose upper-case V sets the format. Signed-off-by: Samuel Wein <sam@samwein.com> [Sakari Ailus: Align subject line, rewrap commit message.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Zhi Mao authored
Add a V4L2 sub-device driver for Galaxycore GC05A2 image sensor. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Zhi Mao <zhi.mao@mediatek.com> [Sakari Ailus: Fold in MAINTAINERS change.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Zhi Mao authored
Add YAML device tree binding for GC05A2 CMOS image sensor, and the relevant MAINTAINERS entries. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Zhi Mao <zhi.mao@mediatek.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Zhi Mao authored
Add a V4L2 sub-device driver for Galaxycore GC08A3 image sensor. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Zhi Mao <zhi.mao@mediatek.com> [Sakari Ailus: Fold in MAINTAINERS change.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Zhi Mao authored
Add YAML device tree binding for GC08A3 CMOS image sensor, and the relevant MAINTAINERS entries. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Zhi Mao <zhi.mao@mediatek.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Hans Verkuil authored
smatch generated this warning: drivers/media/usb/b2c2/flexcop-usb.c:199 flexcop_usb_memory_req() warn: iterator 'i' not incremented and indeed the function is not using i or updating buf. The reason this always worked is that this function is called to write just 6 bytes (a MAC address) to the USB device, and so in practice there is only a single chunk written. If we ever would need to write more than one chunk, this function would fail since each chunk would read from or write to the same buf address. Rewrite the function to properly handle this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Devarsh Thakkar authored
Use v4l2-jpeg core API to import reference quantization and huffman tables used for JPEG Encoding. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Devarsh Thakkar authored
Use exported huffman and quantization tables from v4l2-jpeg core library. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Devarsh Thakkar authored
Enable documentation for v4l2-jpeg header related helper functions which are useful for parsing jpeg files while decoding or creating jpeg headers while encoding. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Devarsh Thakkar authored
Export reference quantization and huffman tables as provided in ITU-T.81 so that they can be re-used by other JPEG drivers. These are example tables provided in ITU-T.81 as reference tables and the JPEG encoders are free to use either these or their own proprietary tables. Also add necessary prefixes to be used for huffman tables in global header file. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Devarsh Thakkar authored
This adds support for stateful V4L2 M2M based driver for Imagination E5010 JPEG Encoder [1] which supports baseline encoding with two different quantization tables and compression ratio as demanded. Support for both contiguous and non-contiguous YUV420 and YUV422 semiplanar formats is added along with alignment restrictions as required by the hardware. System and runtime PM hooks are added in the driver along with v4l2 crop and selection API support. Minimum resolution supported is 64x64 and Maximum resolution supported is 8192x8192. All v4l2-compliance tests are passing [2] : v4l2-compliance -s -f -a -d /dev/video0 -e /dev/video1 Total for e5010 device /dev/video0: 79, Succeeded: 79, Failed: 0, Warnings: 0 NOTE: video1 here is VIVID test pattern generator Also tests [3] were run manually to verify below driver features: - Runtime Power Management - Multi-instance JPEG Encoding - DMABUF import, export support - NV12, NV21, NV16, NV61 video format support - Compression quality S_CTRL - Cropping support using S_SELECTION Existing V4L2 M2M based JPEG drivers namely s5p-jpeg, imx-jpeg and rcar_jpu were referred while making this. TODO: Add MMU and memory tiling support [1]: AM62A TRM (Section 7.6 is for JPEG Encoder) : Link: https://www.ti.com/lit/pdf/spruj16 [2]: v4l2-compliance test : Link: https://gist.github.com/devarsht/1f039c631ca953a57f405cfce1b69e49 [3]: E5010 JPEG Encoder Manual tests : Performance: Link: https://gist.github.com/devarsht/c40672944fd71c9a53ab55adbfd9e28b Functionality: Link: https://gist.github.com/devarsht/8e88fcaabff016bb2bac83d89c9d23ce Compression Quality: Link: https://gist.github.com/devarsht/cbcc7cd97e8c48ba1486caa2b7884655 Multi Instance: Link: https://gist.github.com/devarsht/22c2fca08cd3441fb40f2c7a4cebc95a Crop support: Link: https://gist.github.com/devarsht/de6f5142f678bb1a5338abfd9f814abd Runtime PM: Link: https://gist.github.com/devarsht/70cd95d4440ddc678489d93885ddd4ddCo-developed-by: David Huang <d-huang@ti.com> Signed-off-by: David Huang <d-huang@ti.com> Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Devarsh Thakkar authored
Add dt-bindings for Imagination E5010 JPEG Encoder [1] which is implemented as stateful V4L2 M2M driver. The device supports baseline encoding with two different quantization tables and compression ratio as demanded. Minimum resolution supported is 64x64 and Maximum resolution supported is 8192x8192. Link: https://www.ti.com/lit/pdf/spruj16 [1] (Section 7.6 JPEG Encoder) Co-developed-by: David Huang <d-huang@ti.com> Signed-off-by: David Huang <d-huang@ti.com> Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
- 21 Jun, 2024 10 commits
-
-
Ivan Bornyakov authored
Add initial support for the Wave515 multi-decoder IP. For now it is only able to decode HEVC Main/Main10 profile videos into YUV420. This was tested on FPGA prototype, so wave5_dt_ids[] was not expanded. Users of the real hardware with Wave515 IP will have to * provide firmware specific to their SoC * add struct wave5_match_data like this: static const struct wave5_match_data platform_name_wave515_data = { .flags = WAVE5_IS_DEC, .fw_name = "cnm/wave515_platform_name_fw.bin", .sram_size = (71 * 1024), }; * add item to wave5_dt_ids[] like this: { .compatible = "vendor,soc-wave515", .data = &platform_name_wave515_data, }, * describe new compatible in Documentation/devicetree/bindings/media/cnm,wave521c.yaml Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ivan Bornyakov authored
Move the excessive "sram-size" device-tree property to the device match data. Also change the SRAM memory allocation strategy, instead of allocating exactly sram_size bytes, allocate all available SRAM memory up to sram_size. Add the placeholders wave5_vpu_dec_validate_sec_axi() and wave5_vpu_enc_validate_sec_axi() to validate that the allocated SRAM memory is sufficient to decode/encode bitstream with a given resolution. Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ivan Bornyakov authored
Implement a separate setup routine for interrupts to reduce code duplication. Also enable interrupts based on vpu_attr->support_encoders and vpu_attr->support_decoders fields to facilitate support for other Wave5xx IPs, because not all of them are both encoders and decoders. Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ivan Bornyakov authored
Add initial support for optional reset lines. For now, simply deassert resets while probing the driver and assert them back when removing the driver. Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ivan Bornyakov authored
Add support for decoding HEVC Main10 profile by scaling the FBC buffer stride and size by a factor of (bitdepth / 8). Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ming Qian authored
In section 4.5.1.5. Initialization, the step 4 may be skipped and continue with the Capture Setup sequence, so if the capture has been setup, there is no need to trigger the initial source change event, just start decoding, and follow the dynamic resolution change flow if the configured values do not match those parsed by the decoder. And it won't fail the gstreamer pipeline. Fixes: b833b178 ("media: imx-jpeg: notify source chagne event when the first picture parsed") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ming Qian authored
If the picture size parsed by decoder is different from those previously established, it's a normal flow of dynamic resolution change, not an error case, the log may mislead that some error occurs in decoding, so remove the error log in this case. Fixes: 2db16c6e ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Allen Pais authored
The only generic interface to execute asynchronously in the BH context is tasklet; however, it's marked deprecated and has some design flaws. To replace tasklets, BH workqueue support was recently added. A BH workqueue behaves similarly to regular workqueues except that the queued work items are executed in the BH context. This patch converts drivers/media/* from tasklet to BH workqueue. Based on the work done by Tejun Heo <tj@kernel.org> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Christophe JAILLET authored
"struct vb2_ops" are not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 36607 1156 0 37763 9383 drivers/media/usb/cx231xx/cx231xx-417.o After: ===== text data bss dec hex filename 36735 1016 0 37751 9377 drivers/media/usb/cx231xx/cx231xx-417.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Chi Zhiling authored
syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside. Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
- 20 Jun, 2024 4 commits
-
-
AngeloGioacchino Del Regno authored
MT8195 and MT8188 share a similar MDP3 macro-block, with minor differences - as in, the latter supports a subset of the number of components supported by the former, but are otherwise handled in the same way. Add driver data for MT8188, reusing the already present MT8195 data where possible. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Fei Shao <fshao@chromium.org> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
AngeloGioacchino Del Regno authored
Add a compatible for MediaTek MT8188 RDMA, which supports only a subset of the MDP3 components of its similar MT8195 counterpart. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Hans Verkuil authored
Merge tag 'tags/media-next-uvc-20240617-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git into media_stage uvcvideo fixes and improvements: - add/fix quirks - improve timestamp handling - improve Power Line Frequency handling Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/rc/rc-core.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
- 19 Jun, 2024 2 commits
-
-
Laurent Pinchart authored
Some VSP modules initialize their control handler after initializing the subdev, while some initialize it before. This makes the code inconsistent and more error prone. Standardize on control initialization after initializing the subdev. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
-
Laurent Pinchart authored
To prepare for the removal of the vsp1_entity.state field, pass the state to all entity operations that needs to access it, instead of accessing the state from the entity inside the operation handlers. This lowers the number of accesses to the field. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
-