- 25 Jun, 2013 1 commit
-
-
Sumit.Saxena@lsi.com authored
Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 24 Jun, 2013 11 commits
-
-
Sumit.Saxena@lsi.com authored
Do not return SCSI_MLQUEUE_HOST_BUSY, but send DID_ERROR to SCSI mid-layer, if adapter is in critical error state. "SCSI_MLQUEUE_HOST_BUSY" will keep same SCSI command in loop and it is not a right return value, if controller is hardware critical error. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Martin K. Petersen authored
Make the driver return appropriate sense data when an unsupported operation is queued. This will cause the SCSI layer to stop issuing the offending command. Reported-by: Florian Westphal <fw@strlen.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Martin K. Petersen authored
Not all disks fill out the VPD pages correctly. Add a blacklist flag that allows us ignore the SBC-3 VPD pages for a given device. The BLIST_SKIP_VPD_PAGES flag triggers our existing skip_vpd_pages scsi_device parameter to bypass VPD scanning. Also blacklist the offending Seagate drive model. Reported-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Reddy, Sreekanth authored
If CONFIG_SCSI_MPT2SAS_LOGGING is undefined, then these warnings are emitted drivers/scsi/mpt2sas/mpt2sas_scsih.c: In function '_scsih_sas_broadcast_primitive_event' drivers/scsi/mpt2sas/mpt2sas_scsih.c:5810:40: warning: unused variable 'event_data' Use pr_info() function instead of dewtprintk(). Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
[jejb: checkpatch fixes] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
When SCSI command is received with task attribute not set, set it to SIMPLE. Previously it is set to untagged. This causes the firmware to fail the commands. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
Modified device scan routine so each configuration page read breaks from the while loop when the ioc_status is not equal to MPI2_IOCSTATUS_SUCCESS. [jejb: checkpatch fixes] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
Updated the mpt2sas driver code that issues hard reset to comply with the timing requirements mentioned in MPI specifications rev V. [jejb: checpatch fixes] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sreekanth Reddy authored
Change set in MPI 2.0 Rev W(2.00.15) specification and 2.00.27 header files 1. Added a bit to the IOCExceptions field of the IOCFacts Reply to indicate that the IOC detected a partial memory failure. 2. Added ElapsedSeconds field to RAID Volume Indicator Structure. Added Elapsed Seconds Valid flag to Flags field of this structure. 3. Added ElapsedSeconds field to Integrated RAID Operations Status Event Data. 4. In the IOCSettings field of BIOS Page 1, modified the Adapter Support bits description to specify X86 BIOS. 5. Toolbox Diagnostic CLI Tool Request may now use chain elements in the SGL. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Reddy, Sreekanth authored
Missing delay is not getting set properly. The reason is that it is not defined in the same file from where it is being invoked. The fix is to move the missing delay module parameter from mpt2sas_base.c to mpt2sas_scsh.c. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 04 Jun, 2013 11 commits
-
-
Naresh Kumar Inna authored
- Retain firmware defined configuration settings in the absence of user-provided configuration by eliminating the global RSS and the PF/VF capabilities mailbox commands. - Remove S_IRUGO from sysfs parameters that don't have 'show' functionality. Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Vijay Mohan Guvva authored
Resending the patch as it didn't make the linux-scsi list. This patch fixes fcs rport state machine to address ocassional Brocade FC Direct Attach LUN discovery failure due to not sending PLOGI accept to the target. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Vijay Mohan Guvva authored
When a switch disable/enable or a reboot is done, the HBA port gets an offline and a subsequent online notification. When the port comes up a link up notification is sent to bfa from the firmware. The bfa then send an FLOGI to the firmware which is sent out on the wire. The switch port meanwhile goes offline (presumably for diagnostics) which causes the switch not to respond to the FLOGI. The link down notification is sent to the HBA driver. However owing to a bug in the lps state machine handling the lps state machine does not move to sm_init state (it remains in sm_login state and send a login complete message to fcs). This results in a zero PID assignment as the login is not really complete. This fix is to correctly handle the events in lps state machine. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Martin K. Petersen authored
Introduce eh_timeout which can be used for error handling purposes. This was previously hardcoded to 10 seconds in the SCSI error handling code. However, for some fast-fail scenarios it is necessary to be able to tune this as it can take several iterations (bus device, target, bus, controller) before we give up. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Hannes Reinecke authored
When multipathed systems run into an all-paths-down scenario all devices might be dropped, too. This causes 'del_gendisk' to be called, which will unregister the kobj_map->probe() function for all disk device numbers. When the device comes back the default ->probe() function is run which will call __request_module(), which will deadlock. As 'del_gendisk' typically does _not_ trigger a module unload the default ->probe() function is pointless anyway. This patch implements a dummy ->probe() function, which will just return NULL if the disk is not registered. This will avoid the deadlock. Plus it'll speed up device scanning. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
wenxiong@linux.vnet.ibm.com authored
Defined target_ids,array_ids and vsets_ids as unsigned long to avoid target_destroy accessing memory after it was freed. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sujit Reddy Thumma authored
Compatible list is used in commit 03b1781a but is not documented. Add necessary device tree bindings to describe on-chip UFS host controllers. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Geert Uytterhoeven authored
If NO_DMA=y: drivers/built-in.o: In function `ufshcd_transfer_req_compl': drivers/scsi/ufs/ufshcd.c:1182: undefined reference to `scsi_dma_unmap' drivers/built-in.o: In function `ufshcd_map_sg': drivers/scsi/ufs/ufshcd.c:377: undefined reference to `scsi_dma_map' drivers/built-in.o: In function `ufshcd_do_reset': drivers/scsi/ufs/ufshcd.c:912: undefined reference to `scsi_dma_unmap' drivers/built-in.o: In function `ufshcd_memory_alloc': drivers/scsi/ufs/ufshcd.c:565: undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `ufshcd_free_hba_memory': drivers/scsi/ufs/ufshcd.c:185: undefined reference to `dma_free_coherent' drivers/scsi/ufs/ufshcd.c:192: undefined reference to `dma_free_coherent' drivers/scsi/ufs/ufshcd.c:199: undefined reference to `dma_free_coherent' drivers/scsi/ufs/ufshcd.c:185: undefined reference to `dma_free_coherent' drivers/scsi/ufs/ufshcd.c:192: undefined reference to `dma_free_coherent' drivers/built-in.o:drivers/scsi/ufs/ufshcd.c:199: more undefined references to `dma_free_coherent' follow drivers/built-in.o: In function `ufshcd_abort': drivers/scsi/ufs/ufshcd.c:1498: undefined reference to `scsi_dma_unmap' drivers/built-in.o: In function `ufshcd_device_reset': drivers/scsi/ufs/ufshcd.c:1436: undefined reference to `scsi_dma_unmap' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Carpenter authored
Coccinelle complains about the inconsistent NULL checking on "t". It turns out the check isn't needed because we verified that "t" is non-NULL at the start of the function. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
James Bottomley authored
Remove the arbitrary expectation in libsas that all SCSI commands are 16 bytes or less. Instead do all copies via cmd->cmd_len (and use a pointer to this in the libsas task instead of a copy). Note that this still doesn't enable > 16 byte CDB support in the underlying drivers because their internal format has to be fixed and the wire format of > 16 byte CDBs according to the SAS spec is different. the libsas drivers (isci, aic94xx, mvsas and pm8xxx are all updated for this change. Cc: Lukasz Dorau <lukasz.dorau@intel.com> Cc: Maciej Patelczyk <maciej.patelczyk@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jack Wang <xjtuwjp@gmail.com> Cc: Lindar Liu <lindar_liu@usish.com> Cc: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 31 May, 2013 9 commits
-
-
Steffen Maier authored
Commit 64deb6ef "[SCSI] zfcp: Use status_read_buf_num provided by FCP channel" started using a value returned by the channel but only evaluated the value if the fabric link is up. Commit 8d88cf3f "[SCSI] zfcp: Update status read mempool" introduced mempool resizings based on the above value. On setting an FCP device online for the very first time since boot, a new zeroed adapter object is allocated. If the link is down, the number of status read requests remains zero. Since just the config data exchange is incomplete, we proceed with adapter open recovery. However, we unconditionally call mempool_resize with adapter->stat_read_buf_num == 0 in this case. This causes a kernel message "kernel BUG at mm/mempool.c:131!" in process "zfcperp<FCP-device-bus-ID>" with last function mempool_resize in Krnl PSW and zfcp_erp_thread in the Call Trace. Don't evaluate channel values which are invalid on link down. The number of status read requests is always valid, evaluated, and set to a positive minimum greater than zero. The adapter open recovery can proceed and the channel has status read buffers to inform us on a future link up event. While we are not aware of any other code path that could result in mempool resize attempts of size zero, we still also initialize the number of status read buffers to be posted to a static minimum number on adapter object allocation. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #2.6.35+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Martin Peschke authored
This patch removes an interface that was used to manage access control tables within the HBA. The patch consequently removes the handling for conditions related to those access control tables, too. That initiator-based access control feature was only needed until the introduction of NPIV and was withdrawn with z10 years ago. It's time to cleanup the corresponding device driver code. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Steffen Maier authored
So far, we could only increase the s390dbf log level after an FCP device has been initially set online for it to create the dbf entries required to adjust the level. Introduce zfcp.dbflevel as counterpart to the already existing zfcp.dbfsize to enable debugging of e.g. setting an FCP device online. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Steffen Maier authored
Commit 86a9668a "[SCSI] zfcp: support for hardware data router" reduced the initial block queue limits in the scsi_host_template to the absolute minimum and adjusted them later on. However, the adjustment was too late for the BSG devices of Scsi_Host and fc_host. Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result, users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return with error HBA_STATUS_ERROR. Initialize the block queue limits in zfcp_scsi_host_template to the greatest common denominator (GCD). While we cannot exploit the slightly enlarged maximum request size with data router, this should be neglectible. Doing so also avoids running into trouble after live guest relocation (LGR) / migration from a data router FCP device to an FCP device that does not support data router. In that case, zfcp would figure out the new limits on adapter recovery, but the fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and now too large queue limits. It should also OK, not to use half the size as in the DIX case, because fc_host and Scsi_Host do not transport FCP requests including SCSI commands using protection data. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #3.2+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Daniel Hansel authored
FCP device remains in status ERP_FAILED when device is switched online or adapter recovery is triggered while link to SAN is down. When Exchange Configuration Data command returns the FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process. The only retries are done during the common error recovery procedure (i.e. max. 3 retries with 8sec sleep between) and remains in status ERP_FAILED with QDIO down. This commit reverts the commit 0df13847 (zfcp: Fix adapter activation on link down). When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the adapter recovery will be finished without any retries. QDIO will be up now and status changes such as LINK UP will be received now. Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #2.6.37+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sebastian Ott authored
Remove the now unused function zfcp_device_unregister since all users have been converted to use device_unregister directly. Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sebastian Ott authored
Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sebastian Ott authored
Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sebastian Ott authored
Set the owner member of zfcp_cfdc_fops, to ensure that the caller of these functions holds a module reference. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 26 May, 2013 8 commits
-
-
Linus Torvalds authored
-
Manfred Spraul authored
do_smart_update_queue() is called when an operation (semop, semctl(SETVAL), semctl(SETALL), ...) modified the array. It must check which of the sleeping tasks can proceed. do_smart_update_queue() missed a few wakeups: - if a sleeping complex op was completed, then all per-semaphore queues must be scanned - not only those that were modified by *sops - if a sleeping simple op proceeded, then the global queue must be scanned again And: - the test for "|sops == NULL) before scanning the global queue is not required: If the global queue is empty, then it doesn't need to be scanned - regardless of the reason for calling do_smart_update_queue() The patch is not optimized, i.e. even completing a wait-for-zero operation causes a rescan. This is done to keep the patch as simple as possible. Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - Stable fix to prevent an rpc_task wakeup race - Fix a NFSv4.1 session drain deadlock - Fix a NFSv4/v4.1 mount regression when not running rpc.gssd - Ensure auth_gss pipe detection works in namespaces - Fix SETCLIENTID fallback if rpcsec_gss is not available * tag 'nfs-for-3.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix SETCLIENTID fallback if GSS is not available SUNRPC: Prevent an rpc_task wakeup race NFSv4.1 Fix a pNFS session draining deadlock SUNRPC: Convert auth_gss pipe detection to work in namespaces SUNRPC: Faster detection if gssd is actually running SUNRPC: Fix a bug in gss_create_upcall
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull amd64 edac fix from Borislav Petkov: "A sysfs file permissions correction" * tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix bogus sysfs file permissions
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "This time we made the kernel- and interruption stack allocation reentrant which fixed some strange kernel crashes (specifically protection ID traps). Furthemore this patchset fixes the interrupt stack in UP and SMP configurations by using native locking instructions. And finally usage of floating point calculations on parisc were disabled in the MPILIB." * 'parisc-for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix irq stack on UP and SMP parisc/superio: Use module_pci_driver to register driver parisc: make interrupt and interruption stack allocation reentrant parisc: show number of FPE and unaligned access handler calls in /proc/interrupts parisc: add additional parisc git tree to MAINTAINERS file parisc: use PAGE_SHIFT instead of hardcoded value 12 in pacache.S parisc: add rp5470 entry to machine database MPILIB: disable usage of floating point registers on parisc
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull xfs fixes from Ben Myers: "Here are fixes for corruption on 512 byte filesystems, a rounding error, a use-after-free, some flags to fix lockdep reports, and several fixes related to CRCs. We have a somewhat larger post -rc1 queue than usual due to fixes related to the CRC feature we merged for 3.10: - Fix for corruption with FSX on 512 byte blocksize filesystems - Fix rounding error in xfs_free_file_space - Fix use-after-free with extent free intents - Add several missing KM_NOFS flags to fix lockdep reports - Several fixes for CRC related code" * tag 'for-linus-v3.10-rc3' of git://oss.sgi.com/xfs/xfs: xfs: remote attribute lookups require the value length xfs: xfs_attr_shortform_allfit() does not handle attr3 format. xfs: xfs_da3_node_read_verify() doesn't handle XFS_ATTR3_LEAF_MAGIC xfs: fix missing KM_NOFS tags to keep lockdep happy xfs: Don't reference the EFI after it is freed xfs: fix rounding in xfs_free_file_space xfs: fix sub-page blocksize data integrity writes
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
Pull bettery fixes from Anton Vorontsov: "Last minute one-liners: wrong kfree usage fix, module alias fixup and kconfig adjustments" * tag 'for-v3.10-fixes' of git://git.infradead.org/battery-2.6: pm2301_charger: Fix module alias prefix wm831x_backup: Fix wrong kfree call for devdata->backup.name bq27x00: Fix I2C dependency in KConfig lp8788-charger: Fix kconfig dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fixes from Rafael Wysocki: - Additional CPU ID for the intel_pstate driver from Dirk Brandewie. - More cpufreq fixes related to ARM big.LITTLE support and locking from Viresh Kumar. - VIA C7 cpufreq build fix from Rafał Bilski. - ACPI power management fix making it possible to use device power states regardless of the CONFIG_PM setting from Rafael J Wysocki. - New ACPI video blacklist item from Bastian Triller. * tag 'pm+acpi-3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Add "Asus UL30A" to ACPI video detect blacklist cpufreq: arm_big_little_dt: Instantiate as platform_driver cpufreq: arm_big_little_dt: Register driver only if DT has valid data cpufreq / e_powersaver: Fix linker error when ACPI processor is a module cpufreq / intel_pstate: Add additional supported CPU ID cpufreq: Drop rwsem lock around CPUFREQ_GOV_POLICY_EXIT ACPI / PM: Allow device power states to be used for CONFIG_PM unset
-