- 22 Nov, 2010 5 commits
-
-
Mario Kleiner authored
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Mario Kleiner authored
In the vblank irq handler, calls to actual vblank handling, or at least drm_handle_vblank(), need to happen before calls to radeon_crtc_handle_flip(). Reason: The high precision pageflip timestamping and some other pageflip optimizations will need the updated vblank count and timestamps for the current vblank interval. These are calculated in drm_handle_vblank(), therefore it must go first. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This adds support for dri2 pageflipping. v2: precision updates from Mario Kleiner. v3: Multihead fixes from Mario Kleiner; missing crtc offset add note about update pending bit on pre-avivo chips Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Mario Kleiner authored
This patch adds new functions for use by the drm core: .get_vblank_timestamp() provides a precise timestamp for the end of the most recent (or current) vblank interval of a given crtc, as needed for the DRI2 implementation of the OML_sync_control extension. It is a thin wrapper around the drm function drm_calc_vbltimestamp_from_scanoutpos() which does almost all the work and is shared across drivers. .get_scanout_position() provides the current horizontal and vertical video scanout position and "in vblank" status of a given crtc, as needed by the drm for use by drm_calc_vbltimestamp_from_scanoutpos(). The function is also used by the dynamic gpu reclocking code to determine when it is safe to reclock inside vblank. For that purpose radeon_pm_in_vbl() is modified to accomodate a small change in the function prototype of the radeon_get_crtc_scanoutpos() which is hooked up to .get_scanout_position(). This code has been tested on AVIVO hardware, a RV530 (ATI Mobility Radeon X1600) in a Intel Core-2 Duo MacBookPro and some R600 variant (FireGL V7600) in a single cpu AMD Athlon 64 PC. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Mario Kleiner authored
The DRI2 swap & sync implementation needs precise vblank counts and precise timestamps corresponding to those vblank counts. For conformance to the OpenML OML_sync_control extension specification the DRM timestamp associated with a vblank count should correspond to the start of video scanout of the first scanline of the video frame following the vblank interval for that vblank count. Therefore we need to carry around precise timestamps for vblanks. Currently the DRM and KMS drivers generate timestamps ad-hoc via do_gettimeofday() in some places. The resulting timestamps are sometimes not very precise due to interrupt handling delays, they don't conform to OML_sync_control and some are wrong, as they aren't taken synchronized to the vblank. This patch implements support inside the drm core for precise and robust timestamping. It consists of the following interrelated pieces. 1. Vblank timestamp caching: A per-crtc ringbuffer stores the most recent vblank timestamps corresponding to vblank counts. The ringbuffer can be read out lock-free via the accessor function: struct timeval timestamp; vblankcount = drm_vblank_count_and_time(dev, crtcid, ×tamp). The function returns the current vblank count and the corresponding timestamp for start of video scanout following the vblank interval. It can be used anywhere between enclosing drm_vblank_get(dev, crtcid) and drm_vblank_put(dev,crtcid) statements. It is used inside the drmWaitVblank ioctl and in the vblank event queueing and handling. It should be used by kms drivers for timestamping of bufferswap completion. The timestamp ringbuffer is reinitialized each time vblank irq's get reenabled in drm_vblank_get()/ drm_update_vblank_count(). It is invalidated when vblank irq's get disabled. The ringbuffer is updated inside drm_handle_vblank() at each vblank irq. 2. Calculation of precise vblank timestamps: drm_get_last_vbltimestamp() is used to compute the timestamp for the end of the most recent vblank (if inside active scanout), or the expected end of the current vblank interval (if called inside a vblank interval). The function calls into a new optional kms driver entry point dev->driver->get_vblank_timestamp() which is supposed to provide the precise timestamp. If a kms driver doesn't implement the entry point or if the call fails, a simple do_gettimeofday() timestamp is returned as crude approximation of the true vblank time. A new drm module parameter drm.timestamp_precision_usec allows to disable high precision timestamps (if set to zero) or to specify the maximum acceptable error in the timestamps in microseconds. Kms drivers could implement their get_vblank_timestamp() function in a gpu specific way, as long as returned timestamps conform to OML_sync_control, e.g., by use of gpu specific hardware timestamps. Optionally, kms drivers can simply wrap and use the new utility function drm_calc_vbltimestamp_from_scanoutpos(). This function calls a new optional kms driver function dev->driver->get_scanout_position() which returns the current horizontal and vertical video scanout position of the crtc. The scanout position together with the drm_display_timing of the current video mode is used to calculate elapsed time relative to start of active scanout for the current video frame. This elapsed time is subtracted from the current do_gettimeofday() time to get the timestamp corresponding to start of video scanout. Currently non-interlaced, non-doublescan video modes, with or without panel scaling are handled correctly. Interlaced/ doublescan modes are tbd in a future patch. 3. Filtering of redundant vblank irq's and removal of some race-conditions in the vblank irq enable/disable path: Some gpu's (e.g., Radeon R500/R600) send spurious vblank irq's outside the vblank if vblank irq's get reenabled. These get detected by use of the vblank timestamps and filtered out to avoid miscounting of vblanks. Some race-conditions between the vblank irq enable/disable functions, the vblank irq handler and the gpu itself (updating its hardware vblank counter in the "wrong" moment) are fixed inside vblank_disable_and_save() and drm_update_vblank_count() by use of the vblank timestamps and a new spinlock dev->vblank_time_lock. The time until vblank irq disable is now configurable via a new drm module parameter drm.vblankoffdelay to allow experimentation with timeouts that are much shorter than the current 5 seconds and should allow longer vblank off periods for better power savings. Followup patches will use these new functions to implement precise timestamping for the intel and radeon kms drivers. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 21 Nov, 2010 1 commit
-
-
Linus Torvalds authored
-
- 20 Nov, 2010 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Add EXT4_IOC_TRIM ioctl to handle batched discard fs: Do not dispatch FITRIM through separate super_operation ext4: ext4_fill_super shouldn't return 0 on corruption jbd2: fix /proc/fs/jbd2/<dev> when using an external journal ext4: missing unlock in ext4_clear_request_list() ext4: fix setting random pages PageUptodate
-
Lukas Czerner authored
Filesystem independent ioctl was rejected as not common enough to be in core vfs ioctl. Since we still need to access to this functionality this commit adds ext4 specific ioctl EXT4_IOC_TRIM to dispatch ext4_trim_fs(). It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h and its definition is as follows. struct fstrim_range { __u64 start; __u64 len; __u64 minlen; } start - first Byte to trim len - number of Bytes to trim from start minlen - minimum extent length to trim, free extents shorter than this number of Bytes will be ignored. This will be rounded up to fs block size. After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Lukas Czerner authored
There was concern that FITRIM ioctl is not common enough to be included in core vfs ioctl, as Christoph Hellwig pointed out there's no real point in dispatching this out to a separate vector instead of just through ->ioctl. So this commit removes ioctl_fstrim() from vfs ioctl and trim_fs from super_operation structure. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
- 19 Nov, 2010 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix readdir EOVERFLOW on 32-bit archs ceph: fix frag offset for non-leftmost frags ceph: fix dangling pointer ceph: explicitly specify page alignment in network messages ceph: make page alignment explicit in osd interface ceph: fix comment, remove extraneous args ceph: fix update of ctime from MDS ceph: fix version check on racing inode updates ceph: fix uid/gid on resent mds requests ceph: fix rdcache_gen usage and invalidate ceph: re-request max_size if cap auth changes ceph: only let auth caps update max_size ceph: fix open for write on clustered mds ceph: fix bad pointer dereference in ceph_fill_trace ceph: fix small seq message skipping Revert "ceph: update issue_seq on cap grant"
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits) net: fix kernel-doc for sk_filter_rcu_release be2net: Fix to avoid firmware update when interface is not open. netfilter: fix IP_VS dependencies net: irda: irttp: sync error paths of data- and udata-requests ipv6: Expose reachable and retrans timer values as msecs ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies 3c59x: fix build failure on !CONFIG_PCI ipg.c: remove id [SUNDANCE, 0x1021] net: caif: spi: fix potential NULL dereference ath9k_htc: Avoid setting QoS control for non-QoS frames net: zero kobject in rx_queue_release net: Fix duplicate volatile warning. MAINTAINERS: Add stmmac maintainer bonding: fix a race in IGMP handling cfg80211: fix can_beacon_sec_chan, reenable HT40 gianfar: fix signedness issue net: bnx2x: fix error value sign 8139cp: fix checksum broken r8169: fix checksum broken rds: Integer overflow in RDS cmsg handling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_via: apply magic FIFO fix to vt6420 too
-
Linus Torvalds authored
This reverts commit 59365d13. It turns out that this can break certain existing user land setups. Quoth Sarah Sharp: "On Wednesday, I updated my branch to commit 460781b5 from linus' tree, and my box would not boot. klogd segfaulted, which stalled the whole system. At first I thought it actually hung the box, but it continued booting after 5 minutes, and I was able to log in. It dropped back to the text console instead of the graphical bootup display for that period of time. dmesg surprisingly still works. I've bisected the problem down to this commit (commit 59365d13) The box is running klogd 1.5.5ubuntu3 (from Jaunty). Yes, I know that's old. I read the bit in the commit about changing the permissions of kallsyms after boot, but if I can't boot that doesn't help." So let's just keep the old default, and encourage distributions to do the "chmod -r /proc/kallsyms" in their bootup scripts. This is not worth a kernel option to change default behavior, since it's so easily done in user space. Reported-and-bisected-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Marcus Meissner <meissner@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Eugene Teo <eugeneteo@kernel.org> Cc: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: fix typo in keycode validation supporting large scancodes Input: aiptek - tighten up permissions on sysfs attributes Input: sysrq - pass along lone Alt + SysRq
-
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intelLinus Torvalds authored
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915: Disable FBC on Ironlake to save 1W drm/i915: Take advantage of auto-polling CRT hotplug detection on PCH hardware drm/i915/crt: Introduce struct intel_crt drm/i915: Do not hold mutex when faulting in user addresses drm: radeon: fix error value sign drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx drm/i915: Retire any pending operations on the old scanout when switching drm/i915: Fix I2C adapter registration
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (40 commits) drm/radeon/kms: i2c s/sprintf/snprintf/g for safety drm/radeon/kms: fix i2c pad masks on rs4xx drm/ttm: Fix up a theoretical deadlock drm/radeon/kms: fix tiling info on evergreen drm/radeon/kms: fix alignment when allocating buffers drm/vmwgfx: Fix up an error path during bo creation drm/radeon/kms: register an i2c adapter name for the dp aux bus drm/radeon/kms/atom: add proper external encoders support drm/radeon/kms/atom: cleanup and unify DVO handling drm/radeon/kms: properly power up/down the eDP panel as needed (v4) drm/radeon/kms/atom: set sane defaults in atombios_get_encoder_mode() drm/radeon/kms: turn the backlight off explicitly for dpms drm/radeon/kms: fix typo in r600 cs checker drm: radeon: fix error value sign drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx nouveau: Acknowledge HPD irq in handler, not bottom half drm/nouveau: Fix a few confusions between "chipset" and "card_type". drm/nouveau: don't expose backlight control when available through ACPI drm/nouveau/pm: improve memtiming mappings drm/nouveau: Make PCIE GART size depend on the available RAMIN space. ...
-
Tejun Heo authored
vt6420 has the same FIFO overflow problem as vt6421 when combined with certain devices. This patch applies the magic fix to vt6420 too. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Martin Qvist <q@maq.dk> Reported-by: Peter Zijlstra <peterz@infradead.org> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Randy Dunlap authored
Fix kernel-doc warning for sk_filter_rcu_release(): Warning(net/core/filter.c:586): missing initial short description on line: * sk_filter_rcu_release: Release a socket filter by rcu_head Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sarveshwar Bandi authored
Since interrupts are enabled only when open is called on the interface, Attempting a firmware update operation when interface is down could lead to partial success or failure of operation. This fix fails the request if netif_running is false. Signed-off-by: Sarveshwar Bandi <Sarveshwar.Bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Darrick J. Wong authored
At the start of ext4_fill_super, ret is set to -EINVAL, and any failure path out of that function returns ret. However, the generic_check_addressable clause sets ret = 0 (if it passes), which means that a subsequent failure (e.g. a group checksum error) returns 0 even though the mount should fail. This causes vfs_kern_mount in turn to think that the mount succeeded, leading to an oops. A simple fix is to avoid using ret for the generic_check_addressable check, which was last changed in commit 30ca22c7. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Alex Shi authored
Frame buffer compression is broken on Ironlake due to buggy hardware. Currently it is disabled through chicken bits, but it still consumes over 1W more than if we simply never attempt to enable the FBC code paths. Signed-off-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-
Keith Packard authored
Both IBX and CPT have an automatic hotplug detection mode which appears to work reliably enough that we can dispense with the manual force hotplug trigger stuff. This means that hotplug detection is as simple as reading the current hotplug register values. The first time the hotplug detection is activated, the code synchronously waits for a hotplug sequence in case the hardware hasn't bothered to do a detection cycle since being initialized. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
We will use this structure in future patches to store CRT specific information on the encoder. Split out and tweaked from a patch by Keith Packard. Signed-off-by: Keith Packard <keithp@kithp.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
Linus Torvalds found that it was rather trivial to trigger a system freeze: In fact, with lockdep, I don't even need to do the sysrq-d thing: it shows the bug as it happens. It's the X server taking the same lock recursively. Here's the problem: ============================================= [ INFO: possible recursive locking detected ] 2.6.37-rc2-00012-gbdbd01ac #7 --------------------------------------------- Xorg/2816 is trying to acquire lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e but task is already holding lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a other info that might help us debug this: 2 locks held by Xorg/2816: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a #1: (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b This recursion was introduced by rearranging the locking to avoid the double locking on the fast path (4f27b5d and fbd5a26d) and the introduction of the prefault to encourage the fast paths (b5e4f2b). In order to undo the problem, we rearrange the code to perform the access validation upfront, attempt to prefault and then fight for control of the mutex. the best case scenario where the mutex is uncontended the prefaulting is not wasted. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
- 18 Nov, 2010 16 commits
-
-
Alex Deucher authored
As per advice from Jean Delvare. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
These got lost in the last i2c cleanup. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=23222Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] remove SCSI host lock and serial number usage from ata_scsi_queuecmd
-
Randy Dunlap authored
Update kernel-doc and Documentation maintainers info. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andres Salomon authored
Document things that I would've liked to have known when submitting a driver to gregkh for staging. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andres Salomon authored
This is confusing, as we have "staging" trees for drivers/staging. Call them -next trees. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hans J. Koch authored
My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Bernhard Walle authored
Add a bit more information how to use poll(2) on GPIO value files correctly. For me it was not clear that I need to poll(2) for POLLPRI|POLLERR or select(2) for exceptfds. Signed-off-by: Bernhard Walle <walle@corscience.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
If "p" is NULL then it will cause an oops when we pass it to simple_strtoul(). In this case "p" can not be NULL so I removed the check. I also changed the check a little to make it more explicit that we are testing whether p points to the NUL char. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
scripts/kernel-doc was leaving unescaped '<', '>', and '&' in generated xml output for structs. This causes xml parser errors. Convert these characters to "<", ">", and "&" as needed to prevent errors. Most of the conversion was already done; complete it just before output. Documentation/DocBook/device-drivers.xml:41883: parser error : StartTag: invalid element name #define INPUT_KEYMAP_BY_INDEX (1 << 0) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Patrick McHardy authored
When NF_CONNTRACK is enabled, IP_VS uses conntrack symbols. Therefore IP_VS can't be linked statically when conntrack is built modular. Reported-by: Justin P. Mattock <justinmattock@gmail.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
irttp_data_request() returns meaningful errorcodes, while irttp_udata_request() just returns -1 in similar situations. Sync the two and the loglevels of the accompanying output. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Expose reachable and retrans timer values in msecs instead of jiffies. Both timer values are already exposed as msecs in the neighbour table netlink interface. The creation timestamp format with increased precision is kept but cleaned up. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Youquan Song authored
Kernel build fail for cx25821-video has depends on smp_lock.h header file, but the dependency is removed in recent commit 451a3c24. Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Graf authored
IFLA_PROTINFO exposes timer related per device settings in jiffies. Change it to expose these values in msecs like the sysctl interface does. I did not find any users of IFLA_PROTINFO which rely on any of these values and even if there are, they are likely already broken because there is no way for them to reliably convert such a value to another time format. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-