- 24 Mar, 2009 40 commits
-
-
Daniel Mack authored
When an USB hardware does not provide a valid LANGID, fall back to value zero which is still a reasonable default for most devices. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Vernon Sauder authored
This patch is a merge of patches : - fix function doc and debug - cleanup loop count - optimize code to remove local variable and extra check - init 'req' before use - add missing iounmap call [dbrownell@users.sourceforge.net: capitalize IN/OUT directions in doc] Signed-off-by:
Vernon Sauder <vsauder@inhand.com> [folded by Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Use the new device-level suspend/resume hooks for Gadget Zero; always enable them with the OTG test mode; and support remote wakeup on both configurations even in non-OTG mode. This ensures that both configurations can pass the USBCV remote wakeup tests when the OTG test mode is enabled. This changes behavior by adding autoresume support to the loopback config even in non-OTG mode; the test failure was that it didn't work in OTG mode. Signed-off-by:
-
David Brownell authored
Address one open question in the composite gadget framework: Yes, we should have device-level suspend/resume callbacks in addition to the function-level ones. We have at least one scenario (with gadget zero in OTG test mode) that's awkward to handle without it. Signed-off-by:
-
Yoshihiro Shimoda authored
Fix the problem that system cannot suspend. Signed-off-by:
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by:
-
Roel Kluin authored
transfer_buffer_length and actual_length have become unsigned, therefore some additional conversion of local variables, function arguments and print specifications is desired. A test for a negative urb->transfer_buffer_length became obsolete; instead we ensure that it does not exceed INT_MAX. Also, urb->actual_length is always less than urb->transfer_buffer_length. rh_string() does no longer return -EPIPE in the case of an unsupported ID. Instead its only caller, rh_call_control() does the check. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
VomLehn authored
This is really a follow up to the modifications Alan Cox made for commit 95da310e to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by:
David VomLehn <dvomlehn@cisco.com> Signed-off-by:
-
Alex Stephens authored
One new device ID for CP2101 driver. Signed-off-by: Alex Stephens alex@miranova.com
-
Mark Ellis authored
The ipaq driver currently enforces one port on all devices. This is correct for 2 and 3 endpoint devices, but with 4 endpoint devices meaningful communication occurs on the second pair. This patch allows 2 ports for 4 endpoint devices. Signed-off-by:
Mark Ellis <mark@mpellis.org.uk> Signed-off-by:
-
Ben Dooks authored
The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX architectures, so move it to <plat/usb-control.h> Signed-off-by:
Ben Dooks <ben@simtec.co.uk> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Ben Dooks authored
The ohci-s3c2410.c glue supports both CONFIG_ARCH_S3C2410 and CONFIG_ARCH_S3C64XX so add it to the build of ohci-s3c2410.c Signed-off-by:
-
D.J. Capelis authored
Just noticed this during a grep, figured I might as well send it in. From: D.J. Capelis <dev@capelis.dj> Signed-off-by: -
Hannes Eder authored
Fix this sparse warning: drivers/usb/host/oxu210hp-hcd.c:2687:42: warning: Using plain integer as NULL pointer Signed-off-by:
Hannes Eder <hannes@hanneseder.net> Signed-off-by:
-
Ben Dooks authored
The USB bus clock is usb-bus-host, so print the correct name in the dev_err() statement if we cannot find it. Signed-off-by:
-
Ben Dooks authored
Remove the include of <mach/hardware.h>, as no definitions from it are used by the OHCI driver. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Acked-by:
-
Greg Kroah-Hartman authored
Lots of users are getting confused about the cp2101 driver. It really does support more than just the cp2101 device, so rename it to cp210x to try to prevent confusion. Cc: Craig Shelley <craig@microtron.org.uk> Signed-off-by: -
Craig Shelley authored
This patch lowers the logging priority of certain messages to prevent users from flooding the log files. Signed-off-by:
Craig Shelley <craig@microtron.org.uk> Signed-off-by:
-
Craig Shelley authored
This patch adds support for the extended range of baud rates supported by CP2102 and CP2103 devices described in SiLabs AN205. An additional function cp2101_quantise_baudrate rounds the baud rate as per AN205 Table 1. A modification to the baud rate calculation removes a rounding error, allowing the full range of baud rates to be used. Signed-off-by:
-
Johannes Weiner authored
Use kzfree() instead of memset() + kfree(). Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alan Stern authored
This patch (as1223) removes a bunch of unnecessary "inline" annotations from the usbfs driver. Signed-off-by:
-
Alan Stern authored
This patch (as1221) changes the way usbcore reinitializes a device following a reset or a reset-resume. Currently we call usb_set_interface() for every interface in the active configuration; this is to put the interface into the same altsetting as before the reset and to make sure that the host's endpoint state matches the device's endpoint state. However, sending a Set-Interface request is a waste of time if an interface was already in altsetting 0 before the reset, since it is certainly in altsetting 0 afterward. In addition, many devices can't handle Set-Interface requests -- they crash when they receive them. So instead, the patch adds code to check each interface. If the interface wasn't in altsetting 0 before the reset, we go head with the Set-Interface request as before. But if it was then we skip sending the Set-Interface request, and we clear out the host-side endpoint state by calling usb_disable_interface() followed by usb_enable_interface(). The patch also adds a couple of new comments to explain what's going on. Signed-off-by:
-
Greg Kroah-Hartman authored
These devices are better controlled with the LGPL userspace library found at: http://www.phidgets.com/downloads.php?os_id=3 and full documentation at: http://www.phidgets.com/documentation/web/cdoc/index.html Cc: Chester Fitchett <fitchett@phidgets.com> Acked-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Greg Kroah-Hartman authored
actual_length should also be a u32 and not a signed value. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: -
Greg Kroah-Hartman authored
Roel Kluin pointed out that transfer_buffer_lengths in struct urb was declared as an 'int'. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: -
Alan Stern authored
The code in uhci-q.c doesn't have to use pseudo-negative values. I did it that way because it was easy and because it would give the expected output during debugging. But it doesn't have to work that way. Here's another approach. Signed-off-by:
-
Jouni Hogander authored
This patch disables USB regulators VUSB1V5, VUSB1V8, and VUSB3V1 when the USB cable is unplugged to reduce power consumption. Added a depencency from twl4030 usb driver to TWL_REGULATOR. Signed-off-by:
Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by:
Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by:
-
Pete Zaitcev authored
This patch adds an extension to the binary API so it reaches parity with existing text API (so-called "1u"). The extension delivers additional data, such as ISO descriptors and the interrupt interval. Signed-Off-By:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Ming Lei authored
This patch fixes the following bug: .plug ch341 usb serial port into a hub port; .ch341 driver bound to the device and /dev/ttyUSB0 comes .open /dev/ttyUSB0 by minicom and we can use the serial successfully .suspend the ch341 usb serial device(such as: echo suspend > power/level) .resume the ch341 usb serial device (such as: echo on > power/level) .new port /dev/ttyUSB1 comes ,and the original /dev/ttyUSB0 still exists, but is no longer usable by minicom The patch adds suspend and resume callback to ch341 usb driver to prevent it from unbinding during suspend. The /dev/ttyUSB0 is not released until being closed, so /dev/ttyUSB1 comes after resume, and the original /dev/ttyUSB0 is no longer usable by minicom. It is really a mess for a minicom user. This patch also adds the reset_resume callback to make it usable after resuming from STR or hibernation, for generally STR or hibernation will make the vbus of root-hub lost. Finally enable the driver's supports_autosuspend, for the device is in working order with it. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
-
David Brownell authored
Partial support for DaVinci DM355, on the EVM board; peripheral mode should work, once mainline merges DM355 support. Missing: (a) renumbering the GPIO for DRVVBUS on the DM6446 EVM, when DAVINCI_N_GPIO increases; (b) disabling DM355_DEEPSLEEP.DRVVBUS_OVERRIDE so VBUS is driven according to the ID signal, if cpu_is_..._dm355() The new PHY control bits are ignored on DM6446. Signed-off-by: -
Ajay Kumar Gupta authored
Except on DaVinci, VBUS is now switched off as part of idling the USB link (after a_wait_bcon) whenever a device is disconnected from host. This is correct for OTG hosts, where either SRP or an ID interrupt could turn VBUS on again. However, for non-OTG hosts there's no way to turn VBUS on again, so the host becomes unusable. And the procfs entry which once allowed a manual workaround for this is now gone. This patch adds an is_otg_enabled() check before scheduling the switch-off timer in disconnect path, supporting a "classic host" mode where SRP is unavailable. [ dbrownell@users.sourceforge.net: tweak patch description ] Signed-off-by:
Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by:
-
Giuseppe GORGOGLIONE authored
Correct musb_read_fifosize() and musb_configure_ep0() functions for the #ifndef BLACKFIN branch when the silicon uses static FIFO configuration. (Most current silicon configures this controller to use dynamic FIFO configuration; some parts from ST don't, like the STM STA2062.) Signed-off-by:
Giuseppe GORGOGLIONE <giuseppe.gorgoglione@st.com> Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Ajay Kumar Gupta authored
Fixes endpoint starvation issue when more than one bulk QH is multiplexed on the reserved bulk RX endpoint, which is normal for cases like serial and ethernet adapters. This patch sets the NAK timeout interval for such QHs, and when a timeout triggers the next QH will be scheduled. (This resembles the bulk scheduling done in hardware by EHCI, OHCI, and UHCI.) This scheme doesn't work for devices which are connected to a high to full speed tree (transaction translator) as there is no NAK timeout interrupt from the musb controller from such devices. Tested with PIO, Inventra DMA, CPPI DMA. [ dbrownell@users.sourceforge.net: fold in start_urb() update; clarify only for bulk RX; don't accidentally clear WZC bits ] Signed-off-by:
-
Sergei Shtylyov authored
The current MUSB host code doesn't make use of all the available FIFOs in for periodic transfers since it wrongly assumes the RX and TX sides of any given hw_ep always share one FIFO. Change: use 'in_qh' and 'out_qh' fields of the 'struct musb_hw_ep' to check the endpoint's business; get rid of the now-unused 'periodic' array in the 'struct musb'. Also optimize a loop induction variable in the endpoint lookup code. (Based on a previous patch from Ajay Kumar Gupta <ajay.gupta@ti.com>) [ dbrownell@users.sourceforge.net: clarify description and origin of this fix; whitespace ] Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Felipe Balbi authored
Avoid the following INFO from lock debugging: [ 369.126112] ================================= [ 369.132063] [ INFO: inconsistent lock state ] [ 369.136457] 2.6.28-maemo1 #1 [ 369.139387] --------------------------------- [ 369.143782] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage. [ 369.149855] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 369.154890] (&cdev->lock){+-..}, at: [<bf1979f0>] composite_disconnect+0x1c/0] [ 369.163404] {hardirq-on-W} state was registered at: [ 369.168348] [<c00788a8>] __lock_acquire+0x5d0/0x7d8 [ 369.173506] [<c0078b14>] lock_acquire+0x64/0x78 [ 369.178266] [<c0263a34>] _spin_lock+0x4c/0x80 [ 369.182905] [<bf19597c>] usb_function_deactivate+0x20/0x70 [g_nokia] [ 369.189527] [<bf1a0a88>] 0xbf1a0a88 [ 369.193281] [<bf19f450>] 0xbf19f450 [ 369.197004] [<bf19fa3c>] 0xbf19fa3c [ 369.200758] [<bf1a03a0>] 0xbf1a03a0 [ 369.204481] [<bf19f254>] 0xbf19f254 [ 369.208204] [<bf1a0158>] 0xbf1a0158 [ 369.211927] [<bf1a130c>] 0xbf1a130c [ 369.215650] [<c01c21f0>] usb_gadget_register_driver+0x12c/0x28c [ 369.221846] [<bf1a06bc>] 0xbf1a06bc [ 369.225569] [<bf1a06e8>] 0xbf1a06e8 [ 369.229322] [<c002c2dc>] __exception_text_end+0x64/0x19c [ 369.234877] [<c0081628>] sys_init_module+0x9c/0x194 [ 369.240004] [<c002c8e0>] ret_fast_syscall+0x0/0x2c [ 369.245039] [<ffffffff>] 0xffffffff [ 369.248793] irq event stamp: 218356 [ 369.252302] hardirqs last enabled at (218355): [<c003a77c>] omap3_enter_idle+8 [ 369.260420] hardirqs last disabled at (218356): [<c0264774>] __irq_svc+0x34/0x0 [ 369.267927] softirqs last enabled at (218348): [<c00585a4>] __do_softirq+0x134 [ 369.275892] softirqs last disabled at (218335): [<c005899c>] irq_exit+0x60/0xb0 [ 369.283308] [ 369.283308] other info that might help us debug this: [ 369.289930] no locks held by swapper/0. Cc: David Brownell <david-b@pacbell.net> Signed-off-by: -
David Vrabel authored
To permit a userspace application to associate with WUSB devices using numeric association, control transfers to unauthenticated WUSB devices must be allowed. This requires that wusbcore correctly sets the device state to UNAUTHENTICATED, DEFAULT and ADDRESS and that control transfers can be performed to UNAUTHENTICATED devices. Signed-off-by:
David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Maciej Grela authored
The lack of a MODULE_LICENSE macro in ums-* subdrivers prevented them from loading. Needs to be applied after Alan Stern's usb-storage subdriver separation patchset. Also added missing MODULE_DESCRIPTION and MODULE_AUTHOR entries. Signed-off-by:
Maciej Grela <maciej.grela@gmail.com> Acked-by:
Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Alan Stern authored
This patch (as1217) converts usb-storage's onetouch subdriver into a separate module. Signed-off-by:
-
Alan Stern authored
This patch (as1216) converts usb-storage's karma subdriver into a separate module. Signed-off-by:
-
Alan Stern authored
This patch (as1215) converts usb-storage's alauda subdriver into a separate module. Signed-off-by:
-
Alan Stern authored
This patch (as1214) converts usb-storage's jumpshot subdriver into a separate module. Signed-off-by:
-
