- 12 Mar, 2016 22 commits
-
-
Mauro Carvalho Chehab authored
commit ac75fe5d upstream. That prevents this bug: [ 2382.269496] BUG: unable to handle kernel NULL pointer dereference at 0000000000000540 [ 2382.270013] IP: [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] PGD 0 [ 2382.270013] Oops: 0002 [#1] SMP [ 2382.270013] Modules linked in: saa7134_alsa(-) tda1004x saa7134_dvb videobuf2_dvb dvb_core tda827x tda8290 tuner saa7134 tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc tun bridge stp llc ebtables ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack it87 hwmon_vid snd_hda_codec_idt snd_hda_codec_generic iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq pcspkr i2c_i801 snd_seq_device snd_pcm snd_timer lpc_ich snd mfd_core soundcore binfmt_misc i915 video i2c_algo_bit drm_kms_helper drm r8169 ata_generic serio_raw pata_acpi mii i2c_core [last unloaded: videobuf2_memops] [ 2382.270013] CPU: 0 PID: 4899 Comm: rmmod Not tainted 4.5.0-rc1+ #4 [ 2382.270013] Hardware name: PCCHIPS P17G/P17G, BIOS 080012 05/14/2008 [ 2382.270013] task: ffff880039c38000 ti: ffff88003c764000 task.ti: ffff88003c764000 [ 2382.270013] RIP: 0010:[<ffffffffa01fe616>] [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP: 0018:ffff88003c767ea0 EFLAGS: 00010286 [ 2382.270013] RAX: ffff88003c767eb8 RBX: 0000000000000000 RCX: 0000000000006260 [ 2382.270013] RDX: ffffffffa020a060 RSI: ffffffffa0206de1 RDI: ffff88003c767eb0 [ 2382.270013] RBP: ffff88003c767ed8 R08: 0000000000019960 R09: ffffffff811a5412 [ 2382.270013] R10: ffffea0000d7c200 R11: 0000000000000000 R12: ffff88003c767ea8 [ 2382.270013] R13: 00007ffe760617f7 R14: 0000000000000000 R15: 0000557625d7f1e0 [ 2382.270013] FS: 00007f80bb1c0700(0000) GS:ffff88003f400000(0000) knlGS:0000000000000000 [ 2382.270013] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2382.270013] CR2: 0000000000000540 CR3: 000000003c00f000 CR4: 00000000000006f0 [ 2382.270013] Stack: [ 2382.270013] 000000003c767ed8 ffffffff00000000 ffff880000000000 ffff88003c767eb8 [ 2382.270013] ffff88003c767eb8 ffffffffa049a890 00007ffe76060060 ffff88003c767ef0 [ 2382.270013] ffffffffa049889d ffffffffa049a500 ffff88003c767f48 ffffffff8111079c [ 2382.270013] Call Trace: [ 2382.270013] [<ffffffffa049889d>] saa7134_alsa_exit+0x1d/0x780 [saa7134_alsa] [ 2382.270013] [<ffffffff8111079c>] SyS_delete_module+0x19c/0x1f0 [ 2382.270013] [<ffffffff8170fc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 2382.270013] Code: 20 a0 48 c7 c6 e1 6d 20 a0 48 89 e5 41 54 53 4c 8d 65 d0 48 89 fb 48 83 ec 28 c7 45 d0 00 00 00 00 49 8d 7c 24 08 e8 7a 55 ed e0 <4c> 89 a3 40 05 00 00 48 89 df e8 eb fd ff ff 85 c0 75 1a 48 8d [ 2382.270013] RIP [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP <ffff88003c767ea0> [ 2382.270013] CR2: 0000000000000540 Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Willy Tarreau <w@1wt.eu>
-
Mauro Carvalho Chehab authored
commit e8beb023 upstream. The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Signed-off-by:
-
Alan Stern authored
commit 13b43891 upstream. Runtime suspend during driver probe and removal can cause problems. The driver's runtime_suspend or runtime_resume callbacks may invoked before the driver has finished binding to the device or after the driver has unbound from the device. This problem shows up with the sd and sr drivers, and can cause disk or CD/DVD drives to become unusable as a result. The fix is simple. The drivers store a pointer to the scsi_disk or scsi_cd structure as their private device data when probing is finished, so we simply have to be sure to clear the private data during removal and test it during runtime suspend/resume. This fixes <https://bugs.debian.org/801925>. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Paul Menzel <paul.menzel@giantmonkey.de> Reported-by:
Erich Schubert <erich@debian.org> Reported-by:
Alexandre Rossi <alexandre.rossi@gmail.com> Tested-by:
James Bottomley <James.Bottomley@HansenPartnership.com> [bwh: Backported to 3.2: drop changes to sr as it doesn't support runtime PM] Signed-off-by:
-
Johannes Berg authored
commit 6736fde9 upstream. The code within wait_event_interruptible() is called with !TASK_RUNNING, so mustn't call any functions that can sleep, like mutex_lock(). Since we re-check the list_empty() in a loop after the wait, it's safe to simply use list_empty() without locking. This bug has existed forever, but was only discovered now because all userspace implementations, including the default 'rfkill' tool, use poll() or select() to get a readable fd before attempting to read. Fixes: c64fb016 ("rfkill: create useful userspace interface") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Tejun Heo authored
commit 566d1827 upstream. Some early controllers incorrectly reported zero ports in PORTS_IMPL register and the ahci driver fabricates PORTS_IMPL from the number of ports in those cases. This hasn't mattered but with the new nvme controllers there are cases where zero PORTS_IMPL is valid and should be honored. Disable the workaround for >= AHCI 1.3. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/g/CALCETrU7yMvXEDhjAUShoHEhDwifJGapdw--BKxsP0jmjKGmRw@mail.gmail.com Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 4ae2182b upstream. A Root Port's AER structure (rpc) contains a queue of events. aer_irq() enqueues AER status information and schedules aer_isr() to dequeue and process it. When we remove a device, aer_remove() waits for the queue to be empty, then frees the rpc struct. But aer_isr() references the rpc struct after dequeueing and possibly emptying the queue, which can cause a use-after-free error as in the following scenario with two threads, aer_isr() on the left and a concurrent aer_remove() on the right: Thread A Thread B -------- -------- aer_irq(): rpc->prod_idx++ aer_remove(): wait_event(rpc->prod_idx == rpc->cons_idx) # now blocked until queue becomes empty aer_isr(): # ... rpc->cons_idx++ # unblocked because queue is now empty ... kfree(rpc) mutex_unlock(&rpc->rpc_mutex) To prevent this problem, use flush_work() to wait until the last scheduled instance of aer_isr() has completed before freeing the rpc struct in aer_remove(). I reproduced this use-after-free by flashing a device FPGA and re-enumerating the bus to find the new device. With SLUB debug, this crashes with 0x6b bytes (POISON_FREE, the use-after-free magic number) in GPR25: pcieport 0000:00:00.0: AER: Multiple Corrected error received: id=0000 Unable to handle kernel paging request for data at address 0x27ef9e3e Workqueue: events aer_isr GPR24: dd6aa000 6b6b6b6b 605f8378 605f8360 d99b12c0 604fc674 606b1704 d99b12c0 NIP [602f5328] pci_walk_bus+0xd4/0x104 [bhelgaas: changelog, stable tag] Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Eric Dumazet authored
commit fa0dc04d upstream. Dmitry reported a struct pid leak detected by a syzkaller program. Bug happens in unix_stream_recvmsg() when we break the loop when a signal is pending, without properly releasing scm. Fixes: b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines") Reported-by:
Eric Dumazet <edumazet@google.com> Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> [wt: note, according to Rainer & Ben the bug was really introduced in 2.5.65, not by the commit mentionned in Fixes. 2.6.32 uses siocb->scm instead of scm] Signed-off-by:
-
Ben Hutchings authored
Quoting the RHEL advisory: > It was found that the fix for CVE-2015-1805 incorrectly kept buffer > offset and buffer length in sync on a failed atomic read, potentially > resulting in a pipe buffer state corruption. A local, unprivileged user > could use this flaw to crash the system or leak kernel memory to user > space. (CVE-2016-0774, Moderate) The same flawed fix was applied to stable branches from 2.6.32.y to 3.14.y inclusive, and I was able to reproduce the issue on 3.2.y. We need to give pipe_iov_copy_to_user() a separate offset variable and only update the buffer offset if it succeeds. References: https://rhn.redhat.com/errata/RHSA-2016-0103.htmlSigned-off-by:
-
Linus Torvalds authored
commit 435f49a5 upstream. We used to protect against overflow, but rather than return an error, do what read/write does, namely to limit the total size to MAX_RW_COUNT. This is not only more consistent, but it also means that any broken low-level read/write routine that still keeps counts in 'int' can't break. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Linus Torvalds authored
commit a70b52ec upstream. We had for some reason overlooked the AIO interface, and it didn't use the proper rw_verify_area() helper function that checks (for example) mandatory locking on the file, and that the size of the access doesn't cause us to overflow the provided offset limits etc. Instead, AIO did just the security_file_permission() thing (that rw_verify_area() also does) directly. This fixes it to do all the proper helper functions, which not only means that now mandatory file locking works with AIO too, we can actually remove lines of code. Reported-by:
Manish Honap <manish_honap_vit@yahoo.co.in> Cc: stable@vger.kernel.org Signed-off-by:
-
Willy Tarreau authored
Commit 3feec909 ("l2tp: Fix oops in pppol2tp_xmit") was backported into 2.6.32.16 to fix a possible null deref in pppol2tp. But the same still exists in pppol2tp_sendmsg() possibly causing the same crash. Note that this bug doesn't appear to have any other impact than crashing the system, as the dereferenced pointer is only used to test a value against a 3-bit mask, so it can hardly be abused for anything except leaking one third of a bit of memory. This issue doesn't exist upstream because the code was replaced in 2.6.35 and the new function l2tp_xmit_skb() performs the appropriate check. Reported-by:
-
Jeff Layton authored
commit 7f3697e2 upstream. Dmitry reported that he was able to reproduce the WARN_ON_ONCE that fires in locks_free_lock_context when the flc_posix list isn't empty. The problem turns out to be that we're basically rebuilding the file_lock from scratch in fcntl_setlk when we discover that the setlk has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END, then we may end up with fl_start and fl_end values that differ from when the lock was initially set, if the file position or length of the file has changed in the interim. Fix this by just reusing the same lock request structure, and simply override fl_type value with F_UNLCK as appropriate. That ensures that we really are unlocking the lock that was initially set. While we're there, make sure that we do pop a WARN_ON_ONCE if the removal ever fails. Also return -EBADF in this event, since that's what we would have returned if the close had happened earlier. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Fixes: c293621b (stale POSIX lock handling) Reported-by:
Jeff Layton <jeff.layton@primarydata.com> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> [bwh: Backported to 3.2: s/i_flctx->flc_posix/inode->i_flock/ in comments] Signed-off-by:
-
Dmitry V. Levin authored
commit 525fd5a9 upstream. The value returned by sys_personality has type "long int". It is saved to a variable of type "int", which is not a problem yet because the type of task_struct->pesonality is "unsigned int". The problem is the sign extension from "int" to "long int" that happens on return from sys_sparc64_personality. For example, a userspace call personality((unsigned) -EINVAL) will result to any subsequent personality call, including absolutely harmless read-only personality(0xffffffff) call, failing with errno set to EINVAL. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
-
Matt Fleming authored
commit 74256377 upstream. There are a couple of nasty truncation bugs lurking in the pageattr code that can be triggered when mapping EFI regions, e.g. when we pass a cpa->pgd pointer. Because cpa->numpages is a 32-bit value, shifting left by PAGE_SHIFT will truncate the resultant address to 32-bits. Viorel-Cătălin managed to trigger this bug on his Dell machine that provides a ~5GB EFI region which requires 1236992 pages to be mapped. When calling populate_pud() the end of the region gets calculated incorrectly in the following buggy expression, end = start + (cpa->numpages << PAGE_SHIFT); And only 188416 pages are mapped. Next, populate_pud() gets invoked for a second time because of the loop in __change_page_attr_set_clr(), only this time no pages get mapped because shifting the remaining number of pages (1048576) by PAGE_SHIFT is zero. At which point the loop in __change_page_attr_set_clr() spins forever because we fail to map progress. Hitting this bug depends very much on the virtual address we pick to map the large region at and how many pages we map on the initial run through the loop. This explains why this issue was only recently hit with the introduction of commit a5caa209 ("x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down") It's interesting to note that safe uses of cpa->numpages do exist in the pageattr code. If instead of shifting ->numpages we multiply by PAGE_SIZE, no truncation occurs because PAGE_SIZE is a UL value, and so the result is unsigned long. To avoid surprises when users try to convert very large cpa->numpages values to addresses, change the data type from 'int' to 'unsigned long', thereby making it suitable for shifting by PAGE_SHIFT without any type casting. The alternative would be to make liberal use of casting, but that is far more likely to cause problems in the future when someone adds more code and fails to cast properly; this bug was difficult enough to track down in the first place. Reported-and-tested-by:
Viorel-Cătălin Răpițeanu <rapiteanu.catalin@gmail.com> Acked-by:
Borislav Petkov <bp@alien8.de> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=110131 Link: http://lkml.kernel.org/r/1454067370-10374-1-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Andy Lutomirski authored
commit 4eaffdd5 upstream. My previous comments were still a bit confusing and there was a typo. Fix it up. Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 71b3c126 ("x86/mm: Add barriers and document switch_mm()-vs-flush synchronization") Link: http://lkml.kernel.org/r/0a0b43cdcdd241c5faaaecfbcc91a155ddedc9a1.1452631609.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 71b3c126 upstream. When switch_mm() activates a new PGD, it also sets a bit that tells other CPUs that the PGD is in use so that TLB flush IPIs will be sent. In order for that to work correctly, the bit needs to be visible prior to loading the PGD and therefore starting to fill the local TLB. Document all the barriers that make this work correctly and add a couple that were missing. Signed-off-by:
-
Peter Hurley authored
commit 5c17c861 upstream. ioctl(TIOCGETD) retrieves the line discipline id directly from the ldisc because the line discipline id (c_line) in termios is untrustworthy; userspace may have set termios via ioctl(TCSETS*) without actually changing the line discipline via ioctl(TIOCSETD). However, directly accessing the current ldisc via tty->ldisc is unsafe; the ldisc ptr dereferenced may be stale if the line discipline is changing via ioctl(TIOCSETD) or hangup. Wait for the line discipline reference (just like read() or write()) to retrieve the "current" line discipline id. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> [bwh: Backported to 2.6.32: adjust filename] Signed-off-by:
-
Xin Long authored
commit 7a84bd46 upstream. Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") corrected the hmacid byte-order when setting a hmacid. but the same issue also exists on getting a hmacid. We fix it by changing hmacids to host order when users get them with getsockopt. Fixes: Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Karl Heiss authored
commit 635682a1 upstream. A case can occur when sctp_accept() is called by the user during a heartbeat timeout event after the 4-way handshake. Since sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the bh_sock_lock in sctp_generate_heartbeat_event() will be taken with the listening socket but released with the new association socket. The result is a deadlock on any future attempts to take the listening socket lock. Note that this race can occur with other SCTP timeouts that take the bh_lock_sock() in the event sctp_accept() is called. BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0] ... RIP: 0010:[<ffffffff8152d48e>] [<ffffffff8152d48e>] _spin_lock+0x1e/0x30 RSP: 0018:ffff880028323b20 EFLAGS: 00000206 RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48 RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0 R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225 FS: 0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0) Stack: ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000 <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00 <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8 Call Trace: <IRQ> [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp] [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0 [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0 [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440 [<ffffffff81497255>] ? ip_rcv+0x275/0x350 [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750 ... With lockdep debugging: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- CslRx/12087 is trying to release lock (slock-AF_INET) at: [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp] but there are no more locks to release! other info that might help us debug this: 2 locks held by CslRx/12087: #0: (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0 #1: (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp] Ensure the socket taken is also the same one that is released by saving a copy of the socket before entering the timeout event critical section. Signed-off-by:
Karl Heiss <kheiss@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit cac9b50b upstream. Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 588afcc1 upstream. This fixes the crash reported in: http://seclists.org/bugtraq/2015/Oct/35 The interface number needs a sanity check. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Vladis Dronov authored
commit cb323213 upstream. The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
-
- 29 Jan, 2016 18 commits
-
-
Willy Tarreau authored
Signed-off-by: -
Paolo Bonzini authored
commit e5e57e7a upstream. While setting the KVM PIT counters in 'kvm_pit_load_count', if 'hpet_legacy_start' is set, the function disables the timer on channel[0], instead of the respective index 'channel'. This is because channels 1-3 are not linked to the HPET. Fix the caller to only activate the special HPET processing for channel 0. Reported-by:
P J P <pjp@fedoraproject.org> Fixes: 0185604cSigned-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Andrew Honig authored
commit 0185604c upstream. Currently if userspace restores the pit counters with a count of 0 on channels 1 or 2 and the guest attempts to read the count on those channels, then KVM will perform a mod of 0 and crash. This will ensure that 0 values are converted to 65536 as per the spec. This is CVE-2015-7513. Signed-off-by:
Andy Honig <ahonig@google.com> Signed-off-by:
-
Andrew Banman authored
commit 5f0f2887 upstream. test_pages_in_a_zone() does not account for the possibility of missing sections in the given pfn range. pfn_valid_within always returns 1 when CONFIG_HOLES_IN_ZONE is not set, allowing invalid pfns from missing sections to pass the test, leading to a kernel oops. Wrap an additional pfn loop with PAGES_PER_SECTION granularity to check for missing sections before proceeding into the zone-check code. This also prevents a crash from offlining memory devices with missing sections. Despite this, it may be a good idea to keep the related patch '[PATCH 3/3] drivers: memory: prohibit offlining of memory blocks with missing sections' because missing sections in a memory block may lead to other problems not covered by the scope of this fix. Signed-off-by:
Andrew Banman <abanman@sgi.com> Acked-by:
Alex Thorlton <athorlton@sgi.com> Cc: Russ Anderson <rja@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Daniel Kiper authored
commit a539f353 upstream. Add SECTION_ALIGN_UP() and SECTION_ALIGN_DOWN() macro which aligns given pfn to upper section and lower section boundary accordingly. Required for the latest memory hotplug support for the Xen balloon driver. Signed-off-by:
Daniel Kiper <dkiper@net-space.pl> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> David Rientjes <rientjes@google.com> Signed-off-by:
-
Andrey Ryabinin authored
commit e459dfee upstream. ip6addrlbl_get() has never worked. If ip6addrlbl_hold() succeeded, ip6addrlbl_get() will exit with '-ESRCH'. If ip6addrlbl_hold() failed, ip6addrlbl_get() will use about to be free ip6addrlbl_entry pointer. Fix this by inverting ip6addrlbl_hold() check. Fixes: 2a8cc6c8 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
Cong Wang <cwang@twopensource.com> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Helge Deller authored
commit 71a71fb5 upstream. On parisc syscalls which are interrupted by signals sometimes failed to restart and instead returned -ENOSYS which in the worst case lead to userspace crashes. A similiar problem existed on MIPS and was fixed by commit e967ef02 ("MIPS: Fix restart of indirect syscalls"). On parisc the current syscall restart code assumes that all syscall callers load the syscall number in the delay slot of the ble instruction. That's how it is e.g. done in the unistd.h header file: ble 0x100(%sr2, %r0) ldi #syscall_nr, %r20 Because of that assumption the current code never restored %r20 before returning to userspace. This assumption is at least not true for code which uses the glibc syscall() function, which instead uses this syntax: ble 0x100(%sr2, %r0) copy regX, %r20 where regX depend on how the compiler optimizes the code and register usage. This patch fixes this problem by adding code to analyze how the syscall number is loaded in the delay branch and - if needed - copy the syscall number to regX prior returning to userspace for the syscall restart. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Ed Swierk authored
commit e967ef02 upstream. When 32-bit MIPS userspace invokes a syscall indirectly via syscall(number, arg1, ..., arg7), the kernel looks up the actual syscall based on the given number, shifts the other arguments to the left, and jumps to the syscall. If the syscall is interrupted by a signal and indicates it needs to be restarted by the kernel (by returning ERESTARTNOINTR for example), the syscall must be called directly, since the number is no longer the first argument, and the other arguments are now staged for a direct call. Before shifting the arguments, store the syscall number in pt_regs->regs[2]. This gets copied temporarily into pt_regs->regs[0] after the syscall returns. If the syscall needs to be restarted, handle_signal()/do_signal() copies the number back to pt_regs->reg[2], which ends up in $v0 once control returns to userspace. Signed-off-by:
Ed Swierk <eswierk@skyportsystems.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8929/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Alan Stern authored
commit e50293ef upstream. Commit 8520f380 ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by:
Alexandru Cornea <alexandru.cornea@intel.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: add prototype for hub_release() before first use] Signed-off-by:
-
Dan Carpenter authored
commit abdc9a3b upstream. The code expects the loop to end with "retries" set to zero but, because it is a post-op, it will end set to -1. I have fixed this by moving the decrement inside the loop. Fixes: 014aa2a3 ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Michael Holzheu authored
commit 272fa59c upstream. The print_insn() function returns strings like "lghi %r1,0". To escape the '%' character in sprintf() a second '%' is used. For example "lghi %%r1,0" is converted into "lghi %r1,0". After print_insn() the output string is passed to printk(). Because format specifiers like "%r" or "%f" are ignored by printk() this works by chance most of the time. But for instructions with control registers like "lctl %c6,%c6,780" this fails because printk() interprets "%c" as character format specifier. Fix this problem and escape the '%' characters twice. For example "lctl %%%%c6,%%%%c6,780" is then converted by sprintf() into "lctl %%c6,%%c6,780" and by printk() into "lctl %c6,%c6,780". Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> [bwh: Backported to 3.2: drop the OPERAND_VR case] Signed-off-by:
-
Johan Hovold authored
commit 157f38f9 upstream. Fix parent-device reference leak due to SPI-core taking an unnecessary reference to the parent when allocating the master structure, a reference that was never released. Note that driver core takes its own reference to the parent when the master device is registered. Fixes: 49dce689 ("spi doesn't need class_device") Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Tilman Schmidt authored
commit 4c5e354a upstream. When shutting down the device, the struct ser_cardstate must not be kfree()d immediately after the call to platform_device_unregister() since the embedded struct platform_device is still in use. Move the kfree() call to the release method instead. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Fixes: 2869b23e ("drivers/isdn/gigaset: new M101 driver (v2)") Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Dan Carpenter authored
commit 40d24c4d upstream. There are two issue here. 1) cnt starts as maxloop + 1 so all these loops iterate one more time than intended. 2) At the end of the loop we test for "if (maxloop && !cnt)" but for the first two loops, we end with cnt equal to -1. Changing this to a pre-op means we end with cnt set to 0. Fixes: cae86d4a ('mISDN: Add driver for Infineon ISDN chipset family') Signed-off-by:
-
Peter Hurley authored
commit 9ce119f3 upstream. A line discipline which does not define a receive_buf() method can can cause a GPF if data is ever received [1]. Oddly, this was known to the author of n_tracesink in 2011, but never fixed. [1] GPF report BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 3752d067 PUD 37a7b067 PMD 0 Oops: 0010 [#1] SMP KASAN Modules linked in: CPU: 2 PID: 148 Comm: kworker/u10:2 Not tainted 4.4.0-rc2+ #51 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events_unbound flush_to_ldisc task: ffff88006da94440 ti: ffff88006db60000 task.ti: ffff88006db60000 RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff88006db67b50 EFLAGS: 00010246 RAX: 0000000000000102 RBX: ffff88003ab32f88 RCX: 0000000000000102 RDX: 0000000000000000 RSI: ffff88003ab330a6 RDI: ffff88003aabd388 RBP: ffff88006db67c48 R08: ffff88003ab32f9c R09: ffff88003ab31fb0 R10: ffff88003ab32fa8 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff88006db67c20 R14: ffffffff863df820 R15: ffff88003ab31fb8 FS: 0000000000000000(0000) GS:ffff88006dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000037938000 CR4: 00000000000006e0 Stack: ffffffff829f46f1 ffff88006da94bf8 ffff88006da94bf8 0000000000000000 ffff88003ab31fb0 ffff88003aabd438 ffff88003ab31ff8 ffff88006430fd90 ffff88003ab32f9c ffffed0007557a87 1ffff1000db6cf78 ffff88003ab32078 Call Trace: [<ffffffff8127cf91>] process_one_work+0x8f1/0x17a0 kernel/workqueue.c:2030 [<ffffffff8127df14>] worker_thread+0xd4/0x1180 kernel/workqueue.c:2162 [<ffffffff8128faaf>] kthread+0x1cf/0x270 drivers/block/aoe/aoecmd.c:1302 [<ffffffff852a7c2f>] ret_from_fork+0x3f/0x70 arch/x86/entry/entry_64.S:468 Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff88006db67b50> CR2: 0000000000000000 ---[ end trace a587f8947e54d6ea ]--- Reported-by:
-
James Bottomley authored
commit 5e103356 upstream. KASAN found that our additional element processing scripts drop off the end of the VPD page into unallocated space. The reason is that not every element has additional information but our traversal routines think they do, leading to them expecting far more additional information than is present. Fix this by adding a gate to the traversal routine so that it only processes elements that are expected to have additional information (list is in SES-2 section 6.1.13.1: Additional Element Status diagnostic page overview) Reported-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Tested-by:
-
James Bottomley authored
commit 3417c1b5 upstream. Simple enclosure implementations (mostly USB) are allowed to return only page 8 to every diagnostic query. That really confuses our implementation because we assume the return is the page we asked for and end up doing incorrect offsets based on bogus information leading to accesses outside of allocated ranges. Fix that by checking the page code of the return and giving an error if it isn't the one we asked for. This should fix reported bugs with USB storage by simply refusing to attach to enclosures that behave like this. It's also good defensive practise now that we're starting to see more USB enclosures. Reported-by:
Andrea Gelmini <andrea.gelmini@gelma.net> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Johannes Berg authored
commit b7bb1100 upstream. Some users of rfkill, like NFC and cfg80211, use a dynamic name when allocating rfkill, in those cases dev_name(). Therefore, the pointer passed to rfkill_alloc() might not be valid forever, I specifically found the case that the rfkill name was quite obviously an invalid pointer (or at least garbage) when the wiphy had been renamed. Fix this by making a copy of the rfkill name in rfkill_alloc(). Signed-off-by:
-
