Only the last 12 bits of virtual / physical addresses are used when masking
with IDA_BLOCK_SIZE - 1. Given that the bits are the same regardless of
virtual or physical address, remove the virtual to physical address
conversion.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Instead of converting virtual to physical addresses with the virt_to_dma*()
functions, use dma addresses as provided by DMA API and only add offsets to
these addresses. This makes sure that address conversion is only done by
the DMA API.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Change and use ccw_device_dma_zalloc() so it returns a virtual address like
before, which can be used to access data. However also pass a new dma32_t
pointer type handle, which correlates to the returned virtual address.
This pointer is used to directly pass/set the DMA handle as returned by the
DMA API.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Fix virtual vs physical address confusion and use new dma types and helper
functions to allow for type checking. This does not fix a bug since virtual
and physical address spaces are currently the same.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Change types of I/O structure members which contain physical addresses to
dma32_t and dma64_t bitwise types.

This allows to make use of sparse (aka "make C=1") to find incorrect usage
of physical addresses.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Introduce dma32_t and dma64_t bitwise types, which are supposed to be used
for 31 and 64 bit DMA capable addresses. This allows to use sparse (make
C=1) for type checking, so that incorrect usages can be easily found.

Also add a couple of helper functions which
- convert virtual to DMA addresses and vice versa
- allow for simple logical and arithmetic operations on DMA addresses
- convert DMA addresses to plain u32 and u64 values

All helper functions exist to avoid excessive casting in C code.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Co-developed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.

dax_direct_access() should receive a virtual kernel address in kaddr.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Fix IUCV_IPBUFLST-type buffers virtual vs physical address confusion.
This does not fix a bug since virtual and physical address spaces are
currently the same.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Tests with hot-plugging crytpo cards on KVM guests with debug
kernel build revealed an use after free for the load field of
the struct zcrypt_card. The reason was an incorrect reference
handling of the zcrypt card object which could lead to a free
of the zcrypt card object while it was still in use.

This is an example of the slab message:

    kernel: 0x00000000885a7512-0x00000000885a7513 @offset=1298. First byte 0x68 instead of 0x6b
    kernel: Allocated in zcrypt_card_alloc+0x36/0x70 [zcrypt] age=18046 cpu=3 pid=43
    kernel:  kmalloc_trace+0x3f2/0x470
    kernel:  zcrypt_card_alloc+0x36/0x70 [zcrypt]
    kernel:  zcrypt_cex4_card_probe+0x26/0x380 [zcrypt_cex4]
    kernel:  ap_device_probe+0x15c/0x290
    kernel:  really_probe+0xd2/0x468
    kernel:  driver_probe_device+0x40/0xf0
    kernel:  __device_attach_driver+0xc0/0x140
    kernel:  bus_for_each_drv+0x8c/0xd0
    kernel:  __device_attach+0x114/0x198
    kernel:  bus_probe_device+0xb4/0xc8
    kernel:  device_add+0x4d2/0x6e0
    kernel:  ap_scan_adapter+0x3d0/0x7c0
    kernel:  ap_scan_bus+0x5a/0x3b0
    kernel:  ap_scan_bus_wq_callback+0x40/0x60
    kernel:  process_one_work+0x26e/0x620
    kernel:  worker_thread+0x21c/0x440
    kernel: Freed in zcrypt_card_put+0x54/0x80 [zcrypt] age=9024 cpu=3 pid=43
    kernel:  kfree+0x37e/0x418
    kernel:  zcrypt_card_put+0x54/0x80 [zcrypt]
    kernel:  ap_device_remove+0x4c/0xe0
    kernel:  device_release_driver_internal+0x1c4/0x270
    kernel:  bus_remove_device+0x100/0x188
    kernel:  device_del+0x164/0x3c0
    kernel:  device_unregister+0x30/0x90
    kernel:  ap_scan_adapter+0xc8/0x7c0
    kernel:  ap_scan_bus+0x5a/0x3b0
    kernel:  ap_scan_bus_wq_callback+0x40/0x60
    kernel:  process_one_work+0x26e/0x620
    kernel:  worker_thread+0x21c/0x440
    kernel:  kthread+0x150/0x168
    kernel:  __ret_from_fork+0x3c/0x58
    kernel:  ret_from_fork+0xa/0x30
    kernel: Slab 0x00000372022169c0 objects=20 used=18 fp=0x00000000885a7c88 flags=0x3ffff00000000a00(workingset|slab|node=0|zone=1|lastcpupid=0x1ffff)
    kernel: Object 0x00000000885a74b8 @offset=1208 fp=0x00000000885a7c88
    kernel: Redzone  00000000885a74b0: bb bb bb bb bb bb bb bb                          ........
    kernel: Object   00000000885a74b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
    kernel: Object   00000000885a74c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
    kernel: Object   00000000885a74d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
    kernel: Object   00000000885a74e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
    kernel: Object   00000000885a74f8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
    kernel: Object   00000000885a7508: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 68 4b 6b 6b 6b a5  kkkkkkkkkkhKkkk.
    kernel: Redzone  00000000885a7518: bb bb bb bb bb bb bb bb                          ........
    kernel: Padding  00000000885a756c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a              ZZZZZZZZZZZZ
    kernel: CPU: 0 PID: 387 Comm: systemd-udevd Not tainted 6.8.0-HF #2
    kernel: Hardware name: IBM 3931 A01 704 (KVM/Linux)
    kernel: Call Trace:
    kernel:  [<00000000ca5ab5b8>] dump_stack_lvl+0x90/0x120
    kernel:  [<00000000c99d78bc>] check_bytes_and_report+0x114/0x140
    kernel:  [<00000000c99d53cc>] check_object+0x334/0x3f8
    kernel:  [<00000000c99d820c>] alloc_debug_processing+0xc4/0x1f8
    kernel:  [<00000000c99d852e>] get_partial_node.part.0+0x1ee/0x3e0
    kernel:  [<00000000c99d94ec>] ___slab_alloc+0xaf4/0x13c8
    kernel:  [<00000000c99d9e38>] __slab_alloc.constprop.0+0x78/0xb8
    kernel:  [<00000000c99dc8dc>] __kmalloc+0x434/0x590
    kernel:  [<00000000c9b4c0ce>] ext4_htree_store_dirent+0x4e/0x1c0
    kernel:  [<00000000c9b908a2>] htree_dirblock_to_tree+0x17a/0x3f0
    kernel:  [<00000000c9b919dc>] ext4_htree_fill_tree+0x134/0x400
    kernel:  [<00000000c9b4b3d0>] ext4_dx_readdir+0x160/0x2f0
    kernel:  [<00000000c9b4bedc>] ext4_readdir+0x5f4/0x760
    kernel:  [<00000000c9a7efc4>] iterate_dir+0xb4/0x280
    kernel:  [<00000000c9a7f1ea>] __do_sys_getdents64+0x5a/0x120
    kernel:  [<00000000ca5d6946>] __do_syscall+0x256/0x310
    kernel:  [<00000000ca5eea10>] system_call+0x70/0x98
    kernel: INFO: lockdep is turned off.
    kernel: FIX kmalloc-96: Restoring Poison 0x00000000885a7512-0x00000000885a7513=0x6b
    kernel: FIX kmalloc-96: Marking all objects used

The fix is simple: Before use of the queue not only the queue object
but also the card object needs to increase it's reference count
with a call to zcrypt_card_get(). Similar after use of the queue
not only the queue but also the card object's reference count is
decreased with zcrypt_card_put().
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Current average steal timer calculation produces volatile and inflated
values. The only user of this value is KVM so far and it uses that to
decide whether or not to yield the vCPU which is seeing steal time.
KVM compares average steal timer to a threshold and if the threshold
is past then it does not allow CPU polling and yields it to host, else
it keeps the CPU by polling.
Since KVM's steal time threshold is very low by default (%10) it most
likely is not effected much by the bloated average steal timer values
because the operating region is pretty small. However there might be
new users in the future who might rely on this number. Fix average
steal timer calculation by changing the formula from:

	avg_steal_timer = avg_steal_timer / 2 + steal_timer;

to the following:

	avg_steal_timer = (avg_steal_timer + steal_timer) / 2;

This ensures that avg_steal_timer is actually a naive average of steal
timer values. It now closely follows steal timer values but of course
in a smoother manner.

Fixes: 152e9b86 ("s390/vtime: steal time exponential moving average")
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

As provided with commit cd4386a9 ("s390/cpcmd,vmcp: avoid GFP_DMA
allocations") the Diagnose Code 8 response buffer does not have to be
below 2GB.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Pull printk updates from Petr Mladek:
 "Improve the behavior during panic. The issues were found when testing
  the ongoing changes introducing atomic consoles and printk kthreads:

   - pr_flush() has to wait for the last reserved record instead of the
     last finalized one. Note that records are finalized in random order
     when generated by more CPUs in parallel.

   - Ignore non-finalized records during panic(). Messages printed on
     panic-CPU are always finalized. Messages printed by other CPUs
     might never be finalized when the CPUs get stopped.

   - Block new printk() calls on non-panic CPUs completely. Backtraces
     are printed before entering the panic mode. Later messages would
     just mess information printed by the panic CPU.

   - Do not take console_lock in console_flush_on_panic() at all. The
     original code did try_lock()/console_unlock(). The unlock part
     might cause a deadlock when panic() happened in a scheduler code.

   - Fix conversion of 64-bit sequence number for 32-bit atomic
     operations"

* tag 'printk-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  dump_stack: Do not get cpu_sync for panic CPU
  panic: Flush kernel log buffer at the end
  printk: Avoid non-panic CPUs writing to ringbuffer
  printk: Disable passing console lock owner completely during panic()
  printk: ringbuffer: Skip non-finalized records in panic
  printk: Wait for all reserved records with pr_flush()
  printk: ringbuffer: Cleanup reader terminology
  printk: Add this_cpu_in_panic()
  printk: For @suppress_panic_printk check for other CPU in panic
  printk: ringbuffer: Clarify special lpos values
  printk: ringbuffer: Do not skip non-finalized records with prb_next_seq()
  printk: Use prb_first_seq() as base for 32bit seq macros
  printk: Adjust mapping for 32bit seq macros
  printk: nbcon: Relocate 32bit seq macros

Yes, yes, I know the slab people were planning on going slow and letting
every subsystem fight this thing on their own.  But let's just rip off
the band-aid and get it over and done with.  I don't want to see a
number of unnecessary pull requests just to get rid of a flag that no
longer has any meaning.

This was mainly done with a couple of 'sed' scripts and then some manual
cleanup of the end result.

Link: https://lore.kernel.org/all/CAHk-=wji0u+OOtmAOD-5JV3SXcRJF___k_+8XNKmak0yd5vW1Q@mail.gmail.com/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull slab updates from Vlastimil Babka:

 - Freelist loading optimization (Chengming Zhou)

   When the per-cpu slab is depleted and a new one loaded from the cpu
   partial list, optimize the loading to avoid an irq enable/disable
   cycle. This results in a 3.5% performance improvement on the "perf
   bench sched messaging" test.

 - Kernel boot parameters cleanup after SLAB removal (Xiongwei Song)

   Due to two different main slab implementations we've had boot
   parameters prefixed either slab_ and slub_ with some later becoming
   an alias as both implementations gained the same functionality (i.e.
   slab_nomerge vs slub_nomerge). In order to eventually get rid of the
   implementation-specific names, the canonical and documented
   parameters are now all prefixed slab_ and the slub_ variants become
   deprecated but still working aliases.

 - SLAB_ kmem_cache creation flags cleanup (Vlastimil Babka)

   The flags had hardcoded #define values which became tedious and
   error-prone when adding new ones. Assign the values via an enum that
   takes care of providing unique bit numbers. Also deprecate
   SLAB_MEM_SPREAD which was only used by SLAB, so it's a no-op since
   SLAB removal. Assign it an explicit zero value. The removals of the
   flag usage are handled independently in the respective subsystems,
   with a final removal of any leftover usage planned for the next
   release.

 - Misc cleanups and fixes (Chengming Zhou, Xiaolei Wang, Zheng Yejian)

   Includes removal of unused code or function parameters and a fix of a
   memleak.

* tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  slab: remove PARTIAL_NODE slab_state
  mm, slab: remove memcg_from_slab_obj()
  mm, slab: remove the corner case of inc_slabs_node()
  mm/slab: Fix a kmemleak in kmem_cache_destroy()
  mm, slab, kasan: replace kasan_never_merge() with SLAB_NO_MERGE
  mm, slab: use an enum to define SLAB_ cache creation flags
  mm, slab: deprecate SLAB_MEM_SPREAD flag
  mm, slab: fix the comment of cpu partial list
  mm, slab: remove unused object_size parameter in kmem_cache_flags()
  mm/slub: remove parameter 'flags' in create_kmalloc_caches()
  mm/slub: remove unused parameter in next_freelist_entry()
  mm/slub: remove full list manipulation for non-debug slab
  mm/slub: directly load freelist from cpu partial slab in the likely case
  mm/slub: make the description of slab_min_objects helpful in doc
  mm/slub: replace slub_$params with slab_$params in slub.rst
  mm/slub: unify all sl[au]b parameters with "slab_$param"
  Documentation: kernel-parameters: remove noaliencache

Pull lsm updates from Paul Moore:

 - Promote IMA/EVM to a proper LSM

   This is the bulk of the diffstat, and the source of all the changes
   in the VFS code. Prior to the start of the LSM stacking work it was
   important that IMA/EVM were separate from the rest of the LSMs,
   complete with their own hooks, infrastructure, etc. as it was the
   only way to enable IMA/EVM at the same time as a LSM.

   However, now that the bulk of the LSM infrastructure supports
   multiple simultaneous LSMs, we can simplify things greatly by
   bringing IMA/EVM into the LSM infrastructure as proper LSMs. This is
   something I've wanted to see happen for quite some time and Roberto
   was kind enough to put in the work to make it happen.

 - Use the LSM hook default values to simplify the call_int_hook() macro

   Previously the call_int_hook() macro required callers to supply a
   default return value, despite a default value being specified when
   the LSM hook was defined.

   This simplifies the macro by using the defined default return value
   which makes life easier for callers and should also reduce the number
   of return value bugs in the future (we've had a few pop up recently,
   hence this work).

 - Use the KMEM_CACHE() macro instead of kmem_cache_create()

   The guidance appears to be to use the KMEM_CACHE() macro when
   possible and there is no reason why we can't use the macro, so let's
   use it.

 - Fix a number of comment typos in the LSM hook comment blocks

   Not much to say here, we fixed some questionable grammar decisions in
   the LSM hook comment blocks.

* tag 'lsm-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (28 commits)
  cred: Use KMEM_CACHE() instead of kmem_cache_create()
  lsm: use default hook return value in call_int_hook()
  lsm: fix typos in security/security.c comment headers
  integrity: Remove LSM
  ima: Make it independent from 'integrity' LSM
  evm: Make it independent from 'integrity' LSM
  evm: Move to LSM infrastructure
  ima: Move IMA-Appraisal to LSM infrastructure
  ima: Move to LSM infrastructure
  integrity: Move integrity_kernel_module_request() to IMA
  security: Introduce key_post_create_or_update hook
  security: Introduce inode_post_remove_acl hook
  security: Introduce inode_post_set_acl hook
  security: Introduce inode_post_create_tmpfile hook
  security: Introduce path_post_mknod hook
  security: Introduce file_release hook
  security: Introduce file_post_open hook
  security: Introduce inode_post_removexattr hook
  security: Introduce inode_post_setattr hook
  security: Align inode_setattr hook definition with EVM
  ...

Pull selinux updates from Paul Moore:
 "Really only a few notable changes:

   - Continue the coding style/formatting fixup work

     This is the bulk of the diffstat in this pull request, with the
     focus this time around being the security/selinux/ss directory.

     We've only got a couple of files left to cleanup and once we're
     done with that we can start enabling some automatic style
     verfication and introduce tooling to help new folks format their
     code correctly.

   - Don't restrict xattr copy-up when SELinux policy is not loaded

     This helps systems that use overlayfs, or similar filesystems,
     preserve their SELinux labels during early boot when the SELinux
     policy has yet to be loaded.

   - Reduce the work we do during inode initialization time

     This isn't likely to show up in any benchmark results, but we
     removed an unnecessary SELinux object class lookup/calculation
     during inode initialization.

   - Correct the return values in selinux_socket_getpeersec_dgram()

     We had some inconsistencies with respect to our return values
     across selinux_socket_getpeersec_dgram() and
     selinux_socket_getpeersec_stream().

     This provides a more uniform set of error codes across the two
     functions and should help make it easier for users to identify
     the source of a failure"

* tag 'selinux-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (24 commits)
  selinux: fix style issues in security/selinux/ss/symtab.c
  selinux: fix style issues in security/selinux/ss/symtab.h
  selinux: fix style issues in security/selinux/ss/sidtab.c
  selinux: fix style issues in security/selinux/ss/sidtab.h
  selinux: fix style issues in security/selinux/ss/services.h
  selinux: fix style issues in security/selinux/ss/policydb.c
  selinux: fix style issues in security/selinux/ss/policydb.h
  selinux: fix style issues in security/selinux/ss/mls_types.h
  selinux: fix style issues in security/selinux/ss/mls.c
  selinux: fix style issues in security/selinux/ss/mls.h
  selinux: fix style issues in security/selinux/ss/hashtab.c
  selinux: fix style issues in security/selinux/ss/hashtab.h
  selinux: fix style issues in security/selinux/ss/ebitmap.c
  selinux: fix style issues in security/selinux/ss/ebitmap.h
  selinux: fix style issues in security/selinux/ss/context.h
  selinux: fix style issues in security/selinux/ss/context.h
  selinux: fix style issues in security/selinux/ss/constraint.h
  selinux: fix style issues in security/selinux/ss/conditional.c
  selinux: fix style issues in security/selinux/ss/conditional.h
  selinux: fix style issues in security/selinux/ss/avtab.c
  ...

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Large effort by Eric to lower rtnl_lock pressure and remove locks:

      - Make commonly used parts of rtnetlink (address, route dumps
        etc) lockless, protected by RCU instead of rtnl_lock.

      - Add a netns exit callback which already holds rtnl_lock,
        allowing netns exit to take rtnl_lock once in the core instead
        of once for each driver / callback.

      - Remove locks / serialization in the socket diag interface.

      - Remove 6 calls to synchronize_rcu() while holding rtnl_lock.

      - Remove the dev_base_lock, depend on RCU where necessary.

   - Support busy polling on a per-epoll context basis. Poll length and
     budget parameters can be set independently of system defaults.

   - Introduce struct net_hotdata, to make sure read-mostly global
     config variables fit in as few cache lines as possible.

   - Add optional per-nexthop statistics to ease monitoring / debug of
     ECMP imbalance problems.

   - Support TCP_NOTSENT_LOWAT in MPTCP.

   - Ensure that IPv6 temporary addresses' preferred lifetimes are long
     enough, compared to other configured lifetimes, and at least 2 sec.

   - Support forwarding of ICMP Error messages in IPSec, per RFC 4301.

   - Add support for the independent control state machine for bonding
     per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
     control state machine.

   - Add "network ID" to MCTP socket APIs to support hosts with multiple
     disjoint MCTP networks.

   - Re-use the mono_delivery_time skbuff bit for packets which user
     space wants to be sent at a specified time. Maintain the timing
     information while traversing veth links, bridge etc.

   - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.

   - Simplify many places iterating over netdevs by using an xarray
     instead of a hash table walk (hash table remains in place, for use
     on fastpaths).

   - Speed up scanning for expired routes by keeping a dedicated list.

   - Speed up "generic" XDP by trying harder to avoid large allocations.

   - Support attaching arbitrary metadata to netconsole messages.

  Things we sprinkled into general kernel code:

   - Enforce VM_IOREMAP flag and range in ioremap_page_range and
     introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
     bpf_arena).

   - Rework selftest harness to enable the use of the full range of ksft
     exit code (pass, fail, skip, xfail, xpass).

  Netfilter:

   - Allow userspace to define a table that is exclusively owned by a
     daemon (via netlink socket aliveness) without auto-removing this
     table when the userspace program exits. Such table gets marked as
     orphaned and a restarting management daemon can re-attach/regain
     ownership.

   - Speed up element insertions to nftables' concatenated-ranges set
     type. Compact a few related data structures.

  BPF:

   - Add BPF token support for delegating a subset of BPF subsystem
     functionality from privileged system-wide daemons such as systemd
     through special mount options for userns-bound BPF fs to a trusted
     & unprivileged application.

   - Introduce bpf_arena which is sparse shared memory region between
     BPF program and user space where structures inside the arena can
     have pointers to other areas of the arena, and pointers work
     seamlessly for both user-space programs and BPF programs.

   - Introduce may_goto instruction that is a contract between the
     verifier and the program. The verifier allows the program to loop
     assuming it's behaving well, but reserves the right to terminate
     it.

   - Extend the BPF verifier to enable static subprog calls in spin lock
     critical sections.

   - Support registration of struct_ops types from modules which helps
     projects like fuse-bpf that seeks to implement a new struct_ops
     type.

   - Add support for retrieval of cookies for perf/kprobe multi links.

   - Support arbitrary TCP SYN cookie generation / validation in the TC
     layer with BPF to allow creating SYN flood handling in BPF
     firewalls.

   - Add code generation to inline the bpf_kptr_xchg() helper which
     improves performance when stashing/popping the allocated BPF
     objects.

  Wireless:

   - Add SPP (signaling and payload protected) AMSDU support.

   - Support wider bandwidth OFDMA, as required for EHT operation.

  Driver API:

   - Major overhaul of the Energy Efficient Ethernet internals to
     support new link modes (2.5GE, 5GE), share more code between
     drivers (especially those using phylib), and encourage more
     uniform behavior. Convert and clean up drivers.

   - Define an API for querying per netdev queue statistics from
     drivers.

   - IPSec: account in global stats for fully offloaded sessions.

   - Create a concept of Ethernet PHY Packages at the Device Tree level,
     to allow parameterizing the existing PHY package code.

   - Enable Rx hashing (RSS) on GTP protocol fields.

  Misc:

   - Improvements and refactoring all over networking selftests.

   - Create uniform module aliases for TC classifiers, actions, and
     packet schedulers to simplify creating modprobe policies.

   - Address all missing MODULE_DESCRIPTION() warnings in networking.

   - Extend the Netlink descriptions in YAML to cover message
     encapsulation or "Netlink polymorphism", where interpretation of
     nested attributes depends on link type, classifier type or some
     other "class type".

  Drivers:

   - Ethernet high-speed NICs:
      - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
      - Intel (100G, ice, idpf):
         - support E825-C devices
      - nVidia/Mellanox:
         - support devices with one port and multiple PCIe links
      - Broadcom (bnxt):
         - support n-tuple filters
         - support configuring the RSS key
      - Wangxun (ngbe/txgbe):
         - implement irq_domain for TXGBE's sub-interrupts
      - Pensando/AMD:
         - support XDP
         - optimize queue submission and wakeup handling (+17% bps)
         - optimize struct layout, saving 28% of memory on queues

   - Ethernet NICs embedded and virtual:
      - Google cloud vNIC:
         - refactor driver to perform memory allocations for new queue
           config before stopping and freeing the old queue memory
      - Synopsys (stmmac):
         - obey queueMaxSDU and implement counters required by 802.1Qbv
      - Renesas (ravb):
         - support packet checksum offload
         - suspend to RAM and runtime PM support

   - Ethernet switches:
      - nVidia/Mellanox:
         - support for nexthop group statistics
      - Microchip:
         - ksz8: implement PHY loopback
         - add support for KSZ8567, a 7-port 10/100Mbps switch

   - PTP:
      - New driver for RENESAS FemtoClock3 Wireless clock generator.
      - Support OCP PTP cards designed and built by Adva.

   - CAN:
      - Support recvmsg() flags for own, local and remote traffic on CAN
        BCM sockets.
      - Support for esd GmbH PCIe/402 CAN device family.
      - m_can:
         - Rx/Tx submission coalescing
         - wake on frame Rx

   - WiFi:
      - Intel (iwlwifi):
         - enable signaling and payload protected A-MSDUs
         - support wider-bandwidth OFDMA
         - support for new devices
         - bump FW API to 89 for AX devices; 90 for BZ/SC devices
      - MediaTek (mt76):
         - mt7915: newer ADIE version support
         - mt7925: radio temperature sensor support
      - Qualcomm (ath11k):
         - support 6 GHz station power modes: Low Power Indoor (LPI),
           Standard Power) SP and Very Low Power (VLP)
         - QCA6390 & WCN6855: support 2 concurrent station interfaces
         - QCA2066 support
      - Qualcomm (ath12k):
         - refactoring in preparation for Multi-Link Operation (MLO)
           support
         - 1024 Block Ack window size support
         - firmware-2.bin support
         - support having multiple identical PCI devices (firmware needs
           to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
         - QCN9274: support split-PHY devices
         - WCN7850: enable Power Save Mode in station mode
         - WCN7850: P2P support
      - RealTek:
         - rtw88: support for more rtw8811cu and rtw8821cu devices
         - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
         - rtlwifi: speed up USB firmware initialization
         - rtwl8xxxu:
             - RTL8188F: concurrent interface support
             - Channel Switch Announcement (CSA) support in AP mode
      - Broadcom (brcmfmac):
         - per-vendor feature support
         - per-vendor SAE password setup
         - DMI nvram filename quirk for ACEPC W5 Pro"

* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
  nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
  nexthop: Fix out-of-bounds access during attribute validation
  nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
  nexthop: Only parse NHA_OP_FLAGS for get messages that require it
  bpf: move sleepable flag from bpf_prog_aux to bpf_prog
  bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
  selftests/bpf: Add kprobe multi triggering benchmarks
  ptp: Move from simple ida to xarray
  vxlan: Remove generic .ndo_get_stats64
  vxlan: Do not alloc tstats manually
  devlink: Add comments to use netlink gen tool
  nfp: flower: handle acti_netdevs allocation failure
  net/packet: Add getsockopt support for PACKET_COPY_THRESH
  net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
  selftests/bpf: Add bpf_arena_htab test.
  selftests/bpf: Add bpf_arena_list test.
  selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
  bpf: Add helper macro bpf_addr_space_cast()
  libbpf: Recognize __arena global variables.
  bpftool: Recognize arena map type
  ...

Pull documentation updates from Jonathan Corbet:
 "A moderatly busy cycle for development this time around.

   - Some cleanup of the main index page for easier navigation

   - Rework some of the other top-level pages for better readability
     and, with luck, fewer merge conflicts in the future.

   - Submit-checklist improvements, hopefully the first of many.

   - New Italian translations

   - A fair number of kernel-doc fixes and improvements. We have also
     dropped the recommendation to use an old version of Sphinx.

   - A new document from Thorsten on bisection

  ... and lots of fixes and updates"

* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
  docs: verify/bisect: fixes, finetuning, and support for Arch
  docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
  docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
  docs: submit-checklist: use subheadings
  docs: submit-checklist: structure by category
  docs: new text on bisecting which also covers bug validation
  docs: drop the version constraints for sphinx and dependencies
  docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
  docs: Restore "smart quotes" for quotes
  docs/zh_CN: accurate translation of "function"
  docs: Include simplified link titles in main index
  docs: Correct formatting of title in admin-guide/index.rst
  docs: kernel_feat.py: fix build error for missing files
  MAINTAINERS: Set the field name for subsystem profile section
  kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
  Fixed case issue with 'fault-injection' in documentation
  kernel-doc: handle #if in enums as well
  Documentation: update mailing list addresses
  doc: kerneldoc.py: fix indentation
  scripts/kernel-doc: simplify signature printing
  ...

Pull audit updates from Paul Moore:
 "Two small audit patches:

   - Use the KMEM_CACHE() macro instead of kmem_cache_create()

     The guidance appears to be to use the KMEM_CACHE() macro when
     possible and there is no reason why we can't use the macro, so
     let's use it.

   - Remove an unnecessary assignment in audit_dupe_lsm_field()

     A return value variable was assigned a value in its declaration,
     but the declaration value is overwritten before the return value
     variable is ever referenced; drop the assignment at declaration
     time"

* tag 'audit-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: use KMEM_CACHE() instead of kmem_cache_create()
  audit: remove unnecessary assignment in audit_dupe_lsm_field()

Pull smack updates from Casey Schaufler:

 - Improvements to the initialization of in-memory inodes

 - A fix in ramfs to propery ensure the initialization of in-memory
   inodes

 - Removal of duplicated code in smack_cred_transfer()

* tag 'Smack-for-6.9' of https://github.com/cschaufler/smack-next:
  Smack: use init_task_smack() in smack_cred_transfer()
  ramfs: Initialize security of in-memory inodes
  smack: Initialize the in-memory inode in smack_inode_init_security()
  smack: Always determine inode labels in smack_inode_init_security()
  smack: Handle SMACK64TRANSMUTE in smack_inode_setsecurity()
  smack: Set SMACK64TRANSMUTE only for dirs in smack_inode_setxattr()

Pull seccomp updates from Kees Cook:
 "There are no core kernel changes here; it's entirely selftests and
  samples:

   - Improve reliability of selftests (Terry Tritton, Kees Cook)

   - Fix strict-aliasing warning in samples (Arnd Bergmann)"

* tag 'seccomp-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  samples: user-trap: fix strict-aliasing warning
  selftests/seccomp: Pin benchmark to single CPU
  selftests/seccomp: user_notification_addfd check nextfd is available
  selftests/seccomp: Change the syscall used in KILL_THREAD test
  selftests/seccomp: Handle EINVAL on unshare(CLONE_NEWPID)

Pull hardening updates from Kees Cook:
 "As is pretty normal for this tree, there are changes all over the
  place, especially for small fixes, selftest improvements, and improved
  macro usability.

  Some header changes ended up landing via this tree as they depended on
  the string header cleanups. Also, a notable set of changes is the work
  for the reintroduction of the UBSAN signed integer overflow sanitizer
  so that we can continue to make improvements on the compiler side to
  make this sanitizer a more viable future security hardening option.

  Summary:

   - string.h and related header cleanups (Tanzir Hasan, Andy
     Shevchenko)

   - VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
     Harshit Mogalapalli)

   - selftests/powerpc: Fix load_unaligned_zeropad build failure
     (Michael Ellerman)

   - hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)

   - Handle tail call optimization better in LKDTM (Douglas Anderson)

   - Use long form types in overflow.h (Andy Shevchenko)

   - Add flags param to string_get_size() (Andy Shevchenko)

   - Add Coccinelle script for potential struct_size() use (Jacob
     Keller)

   - Fix objtool corner case under KCFI (Josh Poimboeuf)

   - Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)

   - Add str_plural() helper (Michal Wajdeczko, Kees Cook)

   - Ignore relocations in .notes section

   - Add comments to explain how __is_constexpr() works

   - Fix m68k stack alignment expectations in stackinit Kunit test

   - Convert string selftests to KUnit

   - Add KUnit tests for fortified string functions

   - Improve reporting during fortified string warnings

   - Allow non-type arg to type_max() and type_min()

   - Allow strscpy() to be called with only 2 arguments

   - Add binary mode to leaking_addresses scanner

   - Various small cleanups to leaking_addresses scanner

   - Adding wrapping_*() arithmetic helper

   - Annotate initial signed integer wrap-around in refcount_t

   - Add explicit UBSAN section to MAINTAINERS

   - Fix UBSAN self-test warnings

   - Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL

   - Reintroduce UBSAN's signed overflow sanitizer"

* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
  selftests/powerpc: Fix load_unaligned_zeropad build failure
  string: Convert helpers selftest to KUnit
  string: Convert selftest to KUnit
  sh: Fix build with CONFIG_UBSAN=y
  compiler.h: Explain how __is_constexpr() works
  overflow: Allow non-type arg to type_max() and type_min()
  VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
  lib/string_helpers: Add flags param to string_get_size()
  x86, relocs: Ignore relocations in .notes section
  objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
  overflow: Use POD in check_shl_overflow()
  lib: stackinit: Adjust target string to 8 bytes for m68k
  sparc: vdso: Disable UBSAN instrumentation
  kernel.h: Move lib/cmdline.c prototypes to string.h
  leaking_addresses: Provide mechanism to scan binary files
  leaking_addresses: Ignore input device status lines
  leaking_addresses: Use File::Temp for /tmp files
  MAINTAINERS: Update LEAKING_ADDRESSES details
  fortify: Improve buffer overflow reporting
  fortify: Add KUnit tests for runtime overflows
  ...

Pull execve updates from Kees Cook:

 - Drop needless error path code in remove_arg_zero() (Li kunyu, Kees
   Cook)

 - binfmt_elf_efpic: Don't use missing interpreter's properties (Max
   Filippov)

 - Use /bin/bash for execveat selftests

* tag 'execve-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  exec: Simplify remove_arg_zero() error path
  selftests/exec: Perform script checks with /bin/bash
  exec: Delete unnecessary statements in remove_arg_zero()
  fs: binfmt_elf_efpic: don't use missing interpreter's properties

Pull pstore updates from Kees Cook:

 - Make PSTORE_RAM available by default on arm64 (Nícolas F R A Prado)

 - Allow for dynamic initialization in modular build (Guilherme G
   Piccoli)

 - Add missing allocation failure check (Kunwu Chan)

 - Avoid duplicate memory zeroing (Christophe JAILLET)

 - Avoid potential double-free during pstorefs umount

* tag 'pstore-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/zone: Don't clear memory twice
  pstore/zone: Add a null pointer check to the psz_kmsg_read
  efi: pstore: Allow dynamic initialization based on module parameter
  arm64: defconfig: Enable PSTORE_RAM
  pstore/ram: Register to module device table
  pstore: inode: Only d_invalidate() is needed

Pull nfsd updates from Chuck Lever:
 "The bulk of the patches for this release are optimizations, code
  clean-ups, and minor bug fixes.

  One new feature to mention is that NFSD administrators now have the
  ability to revoke NFSv4 open and lock state. NFSD's NFSv3 support has
  had this capability for some time.

  As always I am grateful to NFSD contributors, reviewers, and testers"

* tag 'nfsd-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (75 commits)
  NFSD: Clean up nfsd4_encode_replay()
  NFSD: send OP_CB_RECALL_ANY to clients when number of delegations reaches its limit
  NFSD: Document nfsd_setattr() fill-attributes behavior
  nfsd: Fix NFSv3 atomicity bugs in nfsd_setattr()
  nfsd: Fix a regression in nfsd_setattr()
  NFSD: OP_CB_RECALL_ANY should recall both read and write delegations
  NFSD: handle GETATTR conflict with write delegation
  NFSD: add support for CB_GETATTR callback
  NFSD: Document the phases of CREATE_SESSION
  NFSD: Fix the NFSv4.1 CREATE_SESSION operation
  nfsd: clean up comments over nfs4_client definition
  svcrdma: Add Write chunk WRs to the RPC's Send WR chain
  svcrdma: Post WRs for Write chunks in svc_rdma_sendto()
  svcrdma: Post the Reply chunk and Send WR together
  svcrdma: Move write_info for Reply chunks into struct svc_rdma_send_ctxt
  svcrdma: Post Send WR chain
  svcrdma: Fix retry loop in svc_rdma_send()
  svcrdma: Prevent a UAF in svc_rdma_send()
  svcrdma: Fix SQ wake-ups
  svcrdma: Increase the per-transport rw_ctx count
  ...

Pull erofs updates from Gao Xiang:
 "In this cycle, we introduce compressed inode support over fscache
  since a lot of native EROFS images are explicitly compressed so that
  EROFS over fscache can be more widely used even without Dragonfly
  Nydus [1].

  Apart from that, there are some folio conversions for compressed
  inodes available as well as a lockdep false positive fix.

  Summary:

   - Some folio conversions for compressed inodes;

   - Add compressed inode support over fscache;

   - Fix lockdep false positives of erofs_pseudo_mnt"

Link: https://nydus.dev [1]

* tag 'erofs-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: support compressed inodes over fscache
  erofs: make iov_iter describe target buffers over fscache
  erofs: fix lockdep false positives on initializing erofs_pseudo_mnt
  erofs: refine managed cache operations to folios
  erofs: convert z_erofs_submissionqueue_endio() to folios
  erofs: convert z_erofs_fill_bio_vec() to folios
  erofs: get rid of `justfound` debugging tag
  erofs: convert z_erofs_do_read_page() to folios
  erofs: convert z_erofs_onlinepage_.* to folios

Pull fsverity update from Eric Biggers:
 "Slightly improve data verification performance by eliminating an
  unnecessary lock"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
  fsverity: remove hash page spin lock

Pull fscrypt updates from Eric Biggers:
 "Fix flakiness in a test by releasing the quota synchronously when a
  key is removed, and other minor cleanups"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  fscrypt: shrink the size of struct fscrypt_inode_info slightly
  fscrypt: write CBC-CTS instead of CTS-CBC
  fscrypt: clear keyring before calling key_put()
  fscrypt: explicitly require that inode->i_blkbits be set

Pull affs update from David Sterba:
 "One change to AFFS that removes use of SLAB_MEM_SPREAD, which is going
  to be removed from MM code"

* tag 'affs-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: remove SLAB_MEM_SPREAD flag usage

Pull btrfs updates from David Sterba:
 "Mostly stabilization, refactoring and cleanup changes. There rest are
  minor performance optimizations due to caching or lock contention
  reduction and a few notable fixes.

  Performance improvements:

   - minor speedup in logging when repeatedly allocated structure is
     preallocated only once, improves latency and decreases lock
     contention

   - minor throughput increase (+6%), reduced lock contention after
     clearing delayed allocation bits, applies to several common
     workload types

   - skip full quota rescan if a new relation is added in the same
     transaction

  Fixes:

   - zstd fix for inline compressed file in subpage mode, updated
     version from the 6.8 time

   - proper qgroup inheritance ioctl parameter validation

   - more fiemap followup fixes after reduced locking done in 6.8:
      - fix race when detecting delalloc ranges

  Core changes:

   - more debugging code:
      - added assertions for a very rare crash in raid56 calculation
      - tree-checker dumps page state to give more insights into
        possible reference counting issues

   - add checksum calculation offloading sysfs knob, for now enabled
     under DEBUG only to determine a good heuristic for deciding the
     offload or synchronous, depends on various factors (block group
     profile, device speed) and is not as clear as initially thought
     (checksum type)

   - error handling improvements, added assertions

   - more page to folio conversion (defrag, truncate), cached size and
     shift

   - preparation for more fine grained locking of sectors in subpage
     mode

   - cleanups and refactoring:
      - include cleanups, forward declarations
      - pointer-to-structure helpers
      - redundant argument removals
      - removed unused code
      - slab cache updates, last use of SLAB_MEM_SPREAD removed"

* tag 'for-6.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
  btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations
  btrfs: fix race when detecting delalloc ranges during fiemap
  btrfs: fix off-by-one chunk length calculation at contains_pending_extent()
  btrfs: qgroup: allow quick inherit if snapshot is created and added to the same parent
  btrfs: qgroup: validate btrfs_qgroup_inherit parameter
  btrfs: include device major and minor numbers in the device scan notice
  btrfs: mark btrfs_put_caching_control() static
  btrfs: remove SLAB_MEM_SPREAD flag use
  btrfs: qgroup: always free reserved space for extent records
  btrfs: tree-checker: dump the page status if hit something wrong
  btrfs: compression: remove dead comments in btrfs_compress_heuristic()
  btrfs: subpage: make writer lock utilize bitmap
  btrfs: subpage: make reader lock utilize bitmap
  btrfs: unexport btrfs_subpage_start_writer() and btrfs_subpage_end_and_test_writer()
  btrfs: pass a valid extent map cache pointer to __get_extent_map()
  btrfs: merge btrfs_del_delalloc_inode() helpers
  btrfs: pass btrfs_device to btrfs_scratch_superblocks()
  btrfs: handle transaction commit errors in flush_reservations()
  btrfs: use KMEM_CACHE() to create btrfs_free_space cache
  btrfs: use KMEM_CACHE() to create delayed ref caches
  ...

Pull zonefs update from Damien Le Moal:

 - A single change for this cycle to convert zonefs to use the new
   mount API

* tag 'zonefs-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: convert zonefs to use the new mount api

Pull asm-generic updates from Arnd Bergmann:
 "Just two small updates this time:

   - A series I did to unify the definition of PAGE_SIZE through
     Kconfig, intended to help with a vdso rework that needs the
     constant but cannot include the normal kernel headers when building
     the compat VDSO on arm64 and potentially others

   - a patch from Yan Zhao to remove the pfn_to_virt() definitions from
     a couple of architectures after finding they were both incorrect
     and entirely unused"

* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: define CONFIG_PAGE_SIZE_*KB on all architectures
  arch: simplify architecture specific page size configuration
  arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
  mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc

Pull ARM defconfig updates from Arnd Bergmann:
 "This has the usual updates to enable platform specific driver modules
  as new hardware gets supported, as well as an update to the
  virt.config fragment so we disable all newly added platforms again"

* tag 'soc-defconfig-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: defconfig: Enable support for cbmem entries in the coreboot table
  ARM: defconfig: enable STMicroelectronics accelerometer and gyro for Exynos
  arm64: defconfig: drop ext2 filesystem and redundant ext3
  arm64: defconfig: Enable Rockchip HDMI/eDP Combo PHY
  arm64: defconfig: Enable Wave5 Video Encoder/Decoder
  arm64: config: disable new platforms in virt.config
  arm64: defconfig: Enable QCOM PBS
  arm64: deconfig: enable Goodix Berlin SPI touchscreen driver as module
  arm64: defconfig: Enable X1E80100 multimedia clock controllers configs
  arm64: defconfig: Enable GCC and interconnect for QDU1000/QRU1000
  arm64: defconfig: enable i.MX8MP ldb bridge
  arm64: defconfig: enable the vf610 gpio driver
  ARM: imx_v6_v7_defconfig: enable the vf610 gpio driver
  ARM: multi_v7_defconfig: Add more TI Keystone support
  arm64: defconfig: enable WCD939x USBSS driver as module
  arm64: defconfig: enable audio drivers for SM8650 QRD board
  arm64: defconfig: Enable Qualcomm interconnect providers
  ARM: multi_v7_defconfig: Enable BACKLIGHT_CLASS_DEVICE
  arm64: defconfig: Enable i.MX8QXP device drivers
  ARM: multi_v7_defconfig: Add more TI Keystone support
  ...

Pull ARM SoC code updates from Arnd Bergmann:
 "These are mostly minor updates, including a number of kerneldoc fixes
  from Randy Dunlap across multiple platforms. OMAP gets a few bugfixes,
  and the MAINTAINERS file gets updated for AMD Zynq and NXP S32G"

* tag 'soc-arm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
  ARM: s32c: update MAINTAINERS entry
  ARM: AM33xx: PRM: Implement REBOOT_COLD
  ARM: AM33xx: PRM: Remove redundand defines
  ARM: omap1: remove duplicated 'select ARCH_OMAP'
  ARM: s3c64xx: make bus_type const
  ARM: imx: Remove usage of the deprecated ida_simple_xx() API
  ARM: OMAP2+: fix kernel-doc warnings
  ARM: OMAP2+: fix kernel-doc warnings
  ARM: OMAP2+: fix a kernel-doc warning
  ARM: OMAP2+: PRM: fix kernel-doc warnings
  ARM: OMAP2+: prm44xx: fix a kernel-doc warning
  ARM: OMAP2+: pmic-cpcap: fix kernel-doc warnings
  ARM: OMAP2+: hwmod: fix kernel-doc warnings
  ARM: OMAP2+: hwmod: remove misuse of kernel-doc
  ARM: OMAP2+: CMINST: use matching function name in kernel-doc
  ARM: OMAP2+: cm33xx: use matching function name in kernel-doc
  ARM: OMAP2+: clock: fix a function name in kernel-doc
  ARM: OMAP2+: clockdomain: fix kernel-doc warnings
  ARM: OMAP2+: am33xx-restart: fix function name in kernel-doc
  soc: xilinx: update maintainer of event manager driver
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "This is the usual mix of updates for drivers that are used on (mostly
  ARM) SoCs with no other top-level subsystem tree, including:

   - The SCMI firmware subsystem gains support for version 3.2 of the
     specification and updates to the notification code

   - Feature updates for Tegra and Qualcomm platforms for added hardware
     support

   - A number of platforms get soc_device additions for identifying
     newly added chips from Renesas, Qualcomm, Mediatek and Google

   - Trivial improvements for firmware and memory drivers amongst
     others, in particular 'const' annotations throughout multiple
     subsystems"

* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  tee: make tee_bus_type const
  soc: qcom: aoss: add missing kerneldoc for qmp members
  soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
  soc: qcom: spm: fix building with CONFIG_REGULATOR=n
  bus: ti-sysc: constify the struct device_type usage
  memory: stm32-fmc2-ebi: keep power domain on
  memory: stm32-fmc2-ebi: add MP25 RIF support
  memory: stm32-fmc2-ebi: add MP25 support
  memory: stm32-fmc2-ebi: check regmap_read return value
  dt-bindings: memory-controller: st,stm32: add MP25 support
  dt-bindings: bus: imx-weim: convert to YAML
  watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  MAINTAINERS: Update SCMI entry with HWMON driver
  MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
  memory: tegra: Fix indentation
  memory: tegra: Add BPMP and ICC info for DLA clients
  memory: tegra: Correct DLA client names
  dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
  firmware: arm_scmi: Update the supported clock protocol version
  ...

Pull SoC device tree updates from Arnd Bergmann:
 "There is very little going on with new SoC support this time, all the
  new chips are variations of others that we already support, and they
  are all based on ARMv8 cores:

   - Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
     networking SoCs designed to be used in wireless routers, similar to
     the already supported MT7986A (Filogic 830).

   - NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
     These are used in many embedded and industrial applications.

   - Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
     automotive SoCs.

   - TI J722S is another automotive variant of its K3 family, related to
     the AM62 series.

  There are a total of 7 new arm32 machines and 45 arm64 ones, including

   - Two Android phones based on the old Tegra30 chip

   - Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
     SoM development board

   - A set-top box using Amlogic Meson G12A S905X2

   - Eight embedded board using NXP i.MX6/8/9

   - Three machines using Mediatek network router chips

   - Ten Chromebooks, all based on Mediatek MT8186

   - One development board based on Mediatek MT8395 (Genio 1200)

   - Seven tablets and phones based on Qualcomm SoCs, most of them from
     Samsung.

   - A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)

   - Three variants of the "White Hawk" board for Renesas automotive
     SoCs

   - Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
     console and industrial form factors.

   - Three evaluation boards for TI K3 based SoCs

  The other changes are mainly the usual feature additions for existing
  hardware, cleanups, and dtc compile time fixes. One notable change is
  the inclusion of PowerVR SGX GPU nodes on TI SoCs"

* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
  riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
  riscv: dts: starfive: jh7100: fix root clock names
  ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
  arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
  arm64: dts: qcom: sm8650: Fix SPMI channels size
  arm64: dts: qcom: sm8550: Fix SPMI channels size
  arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
  arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
  arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
  dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
  dtc: Enable dtc interrupt_provider check
  arm64: dts: st: add video encoder support to stm32mp255
  arm64: dts: st: add video decoder support to stm32mp255
  ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
  ARM: dts: stm32: enable CRC on stm32mp135f-dk
  ARM: dts: stm32: add CRC on stm32mp131
  ARM: dts: add stm32f769-disco-mb1166-reva09
  ARM: dts: stm32: add display support on stm32f769-disco
  ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
  ARM: dts: stm32: add DSI support on stm32f769
  ...

Pull m68k updates from Geert Uytterhoeven:

 - Make the Zorro bus type constant

 - defconfig updates

* tag 'm68k-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v6.8-rc1
  zorro: Make zorro_bus_type const