- 03 Oct, 2022 1 commit
-
-
Lucas De Marchi authored
ce->wa_bb_page is allocated only for graphics version 12. However __gen125_emit_bb_start() is used for any graphics version >= 12.50. For the currently supported platforms this is not an issue, but for future ones there's a mismatch causing the jump to `wa_offset + DG2_PREDICATE_RESULT_BB` to be invalid since wa_offset is not correct. As in other places in the driver, check for graphics version "greater or equal" to future-proof the support for new platforms. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220930050903.3479619-2-lucas.demarchi@intel.com
-
- 30 Sep, 2022 2 commits
-
-
Aravind Iddamsetty authored
As an integrated GPU, MTL does not have local memory and HAS_LMEM() returns false. However the platform's stolen memory is presented via BAR2 (i.e., the BAR we traditionally consider to be the GMADR on IGFX) and should be managed by the driver the same way that local memory is on dgpu platforms (which includes setting the "lmem" bit on page table entries). We use the term "local stolen memory" to refer to this model. The major difference from the traditional BAR2 (GMADR) is that the stolen area is mapped via the BAR2 while in the former BAR2 is an aperture into the GTT VA through which access are made into stolen area. BSPEC: 53098, 63830 v2: 1. dropped is_dsm_invalid, updated valid_stolen_size check from Lucas (Jani, Lucas) 2. drop lmembar_is_igpu_stolen 3. revert to referring GFXMEM_BAR as GEN12_LMEM_BAR (Lucas) v3:(Jani) 1. rename get_mtl_gms_size to mtl_get_gms_size 2. define register for MMIO address v4:(Matt) 1. Use REG_FIELD_GET to read GMS value 2. replace the calculations with SZ_256M/SZ_8M v5: Include more details to commit message on how it is different from earlier platforms (Anshuman) Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
CQ Tang <cq.tang@intel.com> Signed-off-by:
Aravind Iddamsetty <aravind.iddamsetty@intel.com> Original-author: CQ Tang Reviewed-by:
-
Matt Roper authored
The part of the media and blitter engine contexts that we care about for setting up an initial state on MTL are nearly similar to DG2 (and PVC). The difference being PRT_BB_STATE being replaced with NOP. For render/compute engines, the part of the context images are nearly the same, although the layout had a very slight change --- one POSH register was removed and the placement of some LRI/noops adjusted slightly to compensate. v2: - Dg2, mtl xcs offsets slightly vary. Use a separate offsets array(Bala) - Add missing nop in xcs offsets(Bala) v3: - Fix the spacing for nop in xcs offset(MattR) v4: - Fix rcs register offset(MattR) v4.1: - Fix commit message(Lucas) Bspec: 46261, 46260, 45585 Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Licas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
-
- 29 Sep, 2022 6 commits
-
-
Prathap Kumar Valsan authored
Add flag to pipecontrol instruction to ensure in-flight writes are flushed to global observation point. Also split the pipecontrol instruction like we have in gen8. References: https://gitlab.freedesktop.org/drm/intel/-/issues/5886Signed-off-by:
Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
Nirmoy Das authored
i915_gem_drain_workqueue() call i915_gem_drain_freed_objects() so no need to call that again. Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
-
Nirmoy Das authored
i915_gem_drain_freed_objects() might not be enough to free all the objects and RCU delayed work might get scheduled after the i915 device struct gets freed. Call i915_gem_drain_workqueue() to catch all RCU delayed work. Suggested-by:
Chris Wilson <chris.p.wilson@intel.com> Acked-by:
-
Riana Tauro authored
A fundamental assumption is that at lower frequencies, not only do we run slower, but we save power compared to higher frequencies. live_slpc_power checks if running at low frequency saves power v2: re-use code to measure power fixed cosmetic review comments (Vinay) Signed-off-by:Riana Tauro <riana.tauro@intel.com> Reviewed-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220923110043.789178-4-riana.tauro@intel.com
-
Riana Tauro authored
move the power measurement and the triangle filter to a different function. No functional changes. Signed-off-by:
-
Riana Tauro authored
Run slpc selftests on all tiles Signed-off-by:
-
- 28 Sep, 2022 2 commits
-
-
Niranjana Vishwanathapura authored
In await_fence_array(), unpacking syncobj pointer is not needed. Remove it. Reviewed-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by:
-
John Harrison authored
DG2 has issues. To work around one of these the GuC must schedule apps in an exclusive manner across both RCS and CCS. That is, if a context from app X is running on RCS then all CCS engines must sit idle even if there are contexts from apps Y, Z, ... waiting to run. A certain OS favours RCS to the total starvation of CCS. Linux does not. Hence the GuC now has a scheduling policy setting to control this abitration. Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220922201209.1446343-2-John.C.Harrison@Intel.com
-
- 27 Sep, 2022 4 commits
-
-
Chris Wilson authored
If attempting to perform a GT reset takes long than 5 seconds (including resetting the display for gen3/4), then we declare all hope lost and discard all user work and wedge the device to prevent further misbehaviour. 5 seconds is too short a time for such drastic action, as we may be stuck on other timeouts and watchdogs. If we allow a little bit longer before hitting the big red button, we should at the very least capture other hung task indicators pointing towards the reason why the reset was hanging; and allow more marginal cases the extra headroom to complete the reset without further collateral damage. Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/6448Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
The scratch page should never be accessed, and is only assigned as a filler page to redirection invalid userspace access. It is not of a performance concern and so we prefer to have a single consistent configuration across all platforms, reducing the pressure on device memory and avoiding the direct device access that would be required to initialise the scratch page. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
-
Nirmoy Das authored
Print the error code returned by __i915_ttm_migrate() for better debuggability. v2: Fix kernel test robot warning. v3: Fix dim checkpatch warning. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6889Acked-by:
-
Chris Wilson authored
Now that the scratch page and page directories have a reference back to the i915_address_space, we cannot do an immediate free of the ppgtt upon error as those buffer objects will perform a later i915_vm_put in their deferred frees. The downside is that by replacing the onion unwind along the error paths, the ppgtt cleanup must handle a partially constructed vm. This includes ensuring that the vm->cleanup is set prior to the error path. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6900Signed-off-by:
-
- 26 Sep, 2022 2 commits
-
-
Chris Wilson authored
When we submit a new pair of contexts to ELSP for execution, we start a timer by which point we expect the HW to have switched execution to the pending contexts. If the promotion to the new pair of contexts has not occurred, we declare the executing context to have hung and force the preemption to take place by resetting the engine and resubmitting the new contexts. This can lead to an unfair situation where almost all of the preemption timeout is consumed by the first context which just switches into the second context immediately prior to the timer firing and triggering the preemption reset (assuming that the timer interrupts before we process the CS events for the context switch). The second context hasn't yet had a chance to yield to the incoming ELSP (and send the ACk for the promotion) and so ends up being blamed for the reset. If we see that a context switch has occurred since setting the preemption timeout, but have not yet received the ACK for the ELSP promotion, rearm the preemption timer and check again. This is especially significant if the first context was not schedulable and so we used the shortest timer possible, greatly increasing the chance of accidentally blaming the second innocent context. Fixes: 3a7a92ab ("drm/i915/execlists: Force preemption") Fixes: d12acee8 ("drm/i915/execlists: Cancel banned contexts on schedule-out") Reported-by:
-
Jani Nikula authored
The inline function has no place in i915_drv.h. Move it away, un-inline, and untangle some header dependencies while at it. Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
-
- 23 Sep, 2022 2 commits
-
-
Matt Atwood authored
Wa_22015475538 applies to all DG2 (and ATSM) skus. The workaround implementation is identical to Wa_16011620976. LSC_CHICKEN_BIT_0_UDW is a general render register instead of rcs so adding this move to the proper wa init function. bspec:54077 Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
There are ongoing efforts to remove usages of flush_scheduled_work() from drivers in order to avoid several cases of potentential problems when flushing is done from certain contexts. Remove the call from the live_execlists selftest. Its purpose was to be thorough and sync with the execlists capture state handling, but that is not strictly required for the test to function and can be removed. Signed-off-by:
-
- 22 Sep, 2022 4 commits
-
-
Lucas De Marchi authored
Except for graphics version 8 and 9, nothing is done in lrc_init_wa_ctx(). Assume this won't be needed on future platforms as well and remove the warning. Note that this function is not called for anything below version 8 since those don't use either guc or execlist, i.e. HAS_EXECLISTS() is false. Reviewed-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Signed-off-by:
-
Lucas De Marchi authored
There is no reason to consider the setup of Data Stolen Memory fatal on dgfx and non-fatal on integrated. Move the debug and error propagation around so both have the same behavior: non-fatal. Before this change, loading i915 on a system with TGL + DG2 would result in just TGL succeeding the initialization (without stolen). Now loading i915 on the same system with an injected failure in i915_gem_init_stolen(): $ dmesg | grep stolen i915 0000:00:02.0: [drm] Injected failure, disabling use of stolen memory i915 0000:00:02.0: [drm:init_stolen_smem [i915]] Skip stolen region: failed to setup i915 0000:03:00.0: [drm] Injected failure, disabling use of stolen memory i915 0000:03:00.0: [drm:init_stolen_lmem [i915]] Skip stolen region: failed to setup Both GPUs are still available: $ sudo build/tools/lsgpu card1 Intel Dg2 (Gen12) drm:/dev/dri/card1 └─renderD129 drm:/dev/dri/renderD129 card0 Intel Tigerlake (Gen12) drm:/dev/dri/card0 └─renderD128 drm:/dev/dri/renderD128 Reviewed-by:
Wayne Boyer <wayne.boyer@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Add some helpers: adjust_stolen(), request_smem_stolen_() and init_reserved_stolen() that are now called by i915_gem_init_stolen() to initialize each part of the Data Stolen Memory region. Main goal is to split the reserved part within the stolen, also known as WOPCM, as its calculation changes often per platform and is a big source of confusion when handling stolen memory. Reviewed-by:
-
Lucas De Marchi authored
DSMBASE register is defined so BDSM bitfield contains the bits 63 to 20 of the base address of stolen. For the supported platforms bits 0-19 are zero but that may not be true in future. Add the missing mask. v2: Use REG_GENMASK64() Acked-by:
Caz Yokoyama <caz@caztech.com> Reviewed-by:
-
- 21 Sep, 2022 2 commits
-
-
Matt Roper authored
Although the bspec lists several MMIO ranges as "MSLICE," it turns out that a subset of these are of a "GAM" subclass that has unique rules and doesn't followed regular mslice steering behavior. * Xe_HP SDV: GAM ranges must always be steered to 0,0. These registers share the regular steering control register (0xFDC) with other steering types * DG2: GAM ranges must always be steered to 1,0. GAM registers have a dedicated steering control register (0xFE0) so we can set the value once at startup and rely on implicit steering. Technically the hardware default should already be set to 1,0 properly, but it never hurts to ensure that in the driver. Bspec: 66534 Signed-off-by:
-
Nirmoy Das authored
For delayed BO release i915_ttm_delete_mem_notify() gets called twice, once with proper bo->resource and another time with NULL. We shouldn't do anything for the 2nd time as we already cleaned up the obj once. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6850 Fixes: ad74457a ("drm/i915/dgfx: Release mmap on rpm suspend") Signed-off-by:
-
- 20 Sep, 2022 1 commit
-
-
Ashutosh Dixit authored
Register GT0_PERF_LIMIT_REASONS (0x1381a8) is available only for Gen11+. Therefore ensure perf_limit_reasons sysfs/debugfs files are created only for Gen11+. Otherwise on Gen < 5 accessing these files results in the following oops: <1> [88.829420] BUG: unable to handle page fault for address: ffffc90000bb81a8 <1> [88.829438] #PF: supervisor read access in kernel mode <1> [88.829447] #PF: error_code(0x0000) - not-present page Bspec: 20008 Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/6863 Fixes: fe597966 ("drm/i915/debugfs: Add perf_limit_reasons in debugfs") Fixes: fa68bff7 ("drm/i915/gt: Add sysfs throttle frequency interfaces") Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
- 19 Sep, 2022 3 commits
-
-
Chris Wilson authored
i915_perf assumes that it can use the i915_gem_context reference to protect its i915->gem.contexts.list iteration. However, this requires that we do not remove the context from the list until after we drop the final reference and release the struct. If, as currently, we remove the context from the list during context_close(), the link.next pointer may be poisoned while we are holding the context reference and cause a GPF: [ 4070.573157] i915 0000:00:02.0: [drm:i915_perf_open_ioctl [i915]] filtering on ctx_id=0x1fffff ctx_id_mask=0x1fffff [ 4070.574881] general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP [ 4070.574897] CPU: 1 PID: 284392 Comm: amd_performance Tainted: G E 5.17.9 #180 [ 4070.574903] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [ 4070.574907] RIP: 0010:oa_configure_all_contexts.isra.0+0x222/0x350 [i915] [ 4070.574982] Code: 08 e8 32 6e 10 e1 4d 8b 6d 50 b8 ff ff ff ff 49 83 ed 50 f0 41 0f c1 04 24 83 f8 01 0f 84 e3 00 00 00 85 c0 0f 8e fa 00 00 00 <49> 8b 45 50 48 8d 70 b0 49 8d 45 50 48 39 44 24 10 0f 85 34 fe ff [ 4070.574990] RSP: 0018:ffffc90002077b78 EFLAGS: 00010202 [ 4070.574995] RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000000 [ 4070.575000] RDX: 0000000000000001 RSI: ffffc90002077b20 RDI: ffff88810ddc7c68 [ 4070.575004] RBP: 0000000000000001 R08: ffff888103242648 R09: fffffffffffffffc [ 4070.575008] R10: ffffffff82c50bc0 R11: 0000000000025c80 R12: ffff888101bf1860 [ 4070.575012] R13: dead0000000000b0 R14: ffffc90002077c04 R15: ffff88810be5cabc [ 4070.575016] FS: 00007f1ed50c0780(0000) GS:ffff88885ec80000(0000) knlGS:0000000000000000 [ 4070.575021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4070.575025] CR2: 00007f1ed5590280 CR3: 000000010ef6f005 CR4: 00000000003706e0 [ 4070.575029] Call Trace: [ 4070.575033] <TASK> [ 4070.575037] lrc_configure_all_contexts+0x13e/0x150 [i915] [ 4070.575103] gen8_enable_metric_set+0x4d/0x90 [i915] [ 4070.575164] i915_perf_open_ioctl+0xbc0/0x1500 [i915] [ 4070.575224] ? asm_common_interrupt+0x1e/0x40 [ 4070.575232] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575290] drm_ioctl_kernel+0x85/0x110 [ 4070.575296] ? update_load_avg+0x5f/0x5e0 [ 4070.575302] drm_ioctl+0x1d3/0x370 [ 4070.575307] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575382] ? gen8_gt_irq_handler+0x46/0x130 [i915] [ 4070.575445] __x64_sys_ioctl+0x3c4/0x8d0 [ 4070.575451] ? __do_softirq+0xaa/0x1d2 [ 4070.575456] do_syscall_64+0x35/0x80 [ 4070.575461] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 4070.575467] RIP: 0033:0x7f1ed5c10397 [ 4070.575471] Code: 3c 1c e8 1c ff ff ff 85 c0 79 87 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a9 da 0d 00 f7 d8 64 89 01 48 [ 4070.575478] RSP: 002b:00007ffd65c8d7a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 4070.575484] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f1ed5c10397 [ 4070.575488] RDX: 00007ffd65c8d7c0 RSI: 0000000040106476 RDI: 0000000000000006 [ 4070.575492] RBP: 00005620972f9c60 R08: 000000000000000a R09: 0000000000000005 [ 4070.575496] R10: 000000000000000d R11: 0000000000000246 R12: 000000000000000a [ 4070.575500] R13: 000000000000000d R14: 0000000000000000 R15: 00007ffd65c8d7c0 [ 4070.575505] </TASK> [ 4070.575507] Modules linked in: nls_ascii(E) nls_cp437(E) vfat(E) fat(E) i915(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) aesni_intel(E) crypto_simd(E) intel_gtt(E) cryptd(E) ttm(E) rapl(E) intel_cstate(E) drm_kms_helper(E) cfbfillrect(E) syscopyarea(E) cfbimgblt(E) intel_uncore(E) sysfillrect(E) mei_me(E) sysimgblt(E) i2c_i801(E) fb_sys_fops(E) mei(E) intel_pch_thermal(E) i2c_smbus(E) cfbcopyarea(E) video(E) button(E) efivarfs(E) autofs4(E) [ 4070.575549] ---[ end trace 0000000000000000 ]--- v3: fix incorrect syntax of spin_lock() replacing spin_lock_irqsave() v2: irqsave not required in a worker, neither conversion to irq safe elsewhere (Tvrtko), - perf: it's safe to call gen8_configure_context() even if context has been closed, no need to check, - drop unrelated cleanup (Andi, Tvrtko) Reported-by:Mark Janes <mark.janes@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/issues/6222 References: a4e7ccda ("drm/i915: Move context management under GEM") Fixes: f8246cf4 ("drm/i915/gem: Drop free_work for GEM contexts") Signed-off-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by:
-
Janusz Krzysztofik authored
Due to i915_perf assuming that it can use the i915_gem_context reference to protect its i915->gem.contexts.list iteration, we need to defer removal of the context from the list until last reference to the context is put. However, there is a risk of triggering kernel warning on contexts list not empty at driver release time if we deleagate that task to a worker for i915_gem_context_release_work(), unless that work is flushed first. Unfortunately, it is not flushed on driver release. Fix it. Instead of additionally calling flush_workqueue(), either directly or via a new dedicated wrapper around it, replace last call to i915_gem_drain_freed_objects() with existing i915_gem_drain_workqueue() that performs both tasks. Fixes: 75eefd82 ("drm/i915: Release i915_gem_context from a worker") Suggested-by:
-
Matt Roper authored
MTL has separate forcewake tables for the primary/render GT and the media GT; each GT's intel_uncore will use a separate forcewake table and should only initialize the domains that are relevant to that GT. The GT ack register also moves to a new location of (GSI base + 0xDFC) on this platform. Note that although our uncore handlers take care of transparently redirecting all register accesses in the media GT's GSI range to their new offset at 0x380000, the forcewake ranges listed in the table should use the final, post-translation offsets. NOTE: There are two ranges in the media IP that have multicast registers where the two register instances reside in different power wells (either VD0 or VD2). We don't have an easy way to deal with this today (and in fact we don't even access these register ranges in the driver today), so for now we just mark those ranges as FORCEWAKE_ALL which will cause all of the media power wells to be grabbed, ensuring proper operation. If we start reading/writing in those ranges in the future, we can re-visit whether it's worth adding extra steering complexity into our forcewake support. Bspec: 67788, 67789, 52077 Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Harish Chegondi <harish.chegondi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220910001631.1986601-1-matthew.d.roper@intel.com
-
- 16 Sep, 2022 9 commits
-
-
John Harrison authored
A patch was merged to remove the GuC log size override module parameters. That patch was broken and caused kernel error messages on boot in non CONFIG_DEBUG_GUC|GEM builds: [ 12.085121] i915 0000:00:02.0: [drm] *ERROR* Zero GuC log crash dump size! [ 12.092035] i915 0000:00:02.0: [drm] *ERROR* Zero GuC log debug size! So fit it. Fixes: f54e515c ("drm/i915/guc: Remove log size module parameters") Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Julia Lawall <Julia.Lawall@inria.fr> Cc: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220913010929.2734885-2-John.C.Harrison@Intel.com
-
Ashutosh Dixit authored
For MTL, when reading from HW, RP0, RP1 (actuall RPe) and RPn freq use an entirely different set of registers with different fields, bitwidths and units. v2: Move MTL check into a separate function (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Badal Nilawar <badal.nilawar@intel.com> Signed-off-by:
-
Ashutosh Dixit authored
PERF_LIMIT_REASONS register for MTL media gt is different now. v2: Avoid static inline for intel_gt_perf_limit_reasons_reg() (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Badal Nilawar <badal.nilawar@intel.com> Signed-off-by:
-
Tilak Tangudu authored
Add perf_limit_reasons in debugfs. The upper 16 perf_limit_reasons RW "log" bits are identical to the lower 16 RO "status" bits except that the "log" bits remain set until cleared, thereby ensuring the throttling occurrence is not missed. The clear fop clears the upper 16 "log" bits, the get fop gets all 32 "log" and "status" bits. v2: Expand commit message and clarify "log" and "status" bits in comment (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:Tilak Tangudu <tilak.tangudu@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
This, along with the changes already landed in commit 1c66a12a ("drm/i915: Handle each GT on init/release and suspend/resume") makes engines from all GTs actually known to the driver. To accomplish this we need to sprinkle a lot of for_each_gt calls around but is otherwise pretty un-eventuful. v2: - Consolidate adjacent GT loops in a couple places. (Daniele) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
Walk all GTs when suspending. Signed-off-by:
-
Tvrtko Ursulin authored
Walk all GTs from i915_gem_resume when resuming engines. Cc: Andi Shyti <andi.shyti@intel.com> Signed-off-by:
-
Chris Wilson authored
If we abort driver initialisation in the middle of gt/engine discovery, some engines will be fully setup and some not. Those incompletely setup engines only have 'engine->release == NULL' and so will leak any of the common objects allocated. v2: - Drop the destroy_pinned_context() helper for now. It's not really worth it with just a single callsite at the moment. (Janusz) Signed-off-by:
-
John Harrison authored
Going forwards, the intention is for GuC firmware files to be named for their major version only and HuC firmware files to have no version number in the name at all. This patch adds those entries for all platforms that are officially GuC/HuC enabled. Also, update the expected GuC version numbers to the latest firmware release for those platforms. Signed-off-by:
-
- 15 Sep, 2022 2 commits
-
-
Lucas De Marchi authored
Continue converting the driver to the convention of last version first, extending it to the future platforms. Now, any GRAPHICS_VER >= 11 will be handled by the first branch. Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Instead of calling read_clock_frequency() to walk the if/else ladder per platform, move the ladder to intel_gt_init_clock_frequency() and use one function per branch. With the new logic, it's now clear the call to gen9_get_crystal_clock_freq() was just dead code, as gen9 is handled by another function and there is no version 10. Remove that function and the caller. v2: Correctly handle intel_gt_check_clock_frequency() that also calls the function to read clock frequency (Gustavo) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:
-
