- 14 Oct, 2014 1 commit
-
-
Karl Beldan authored
It affects non-(V)HT rates and can lead to selecting an rts_cts rate that is not a basic rate or way superior to the reference rate (ATM rates[0] used for the 1st attempt of the protected frame data). E.g, assuming drivers register growing (bitrate) sorted tables of ieee80211_rate-s, having : - rates[0].idx == d'2 and basic_rates == b'10100 will select rts_cts idx b'10011 & ~d'(BIT(2)-1), i.e. 1, likewise - rates[0].idx == d'2 and basic_rates == b'10001 will select rts_cts idx b'10000 The first is not a basic rate and the second is > rates[0]. Also, wrt severity of the addressed misbehavior, ATM we only have one rts_cts_rate_idx rather than one per rate table entry, so this idx might still point to bitrates > rates[1..MAX_RATES]. Fixes: 5253ffb8 ("mac80211: always pick a basic rate to tx RTS/CTS for pre-HT rates") Cc: stable@vger.kernel.org Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
- 09 Oct, 2014 5 commits
-
-
Luciano Coelho authored
The nl80211 channel switch count attribute (NL80211_ATTR_CH_SWITCH_COUNT) is specified as u32, but the specification uses u8 for the counter. To make sure strange things don't happen without informing the user, sanity check the value and return -EINVAL if it doesn't fit in u8. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Fabian Frederick authored
Correct the kernel-doc, the parameter is called "blocked" not "state". Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Luciano Coelho authored
The chandef of the channel context a vif is using may be different than the chandef of the vif itself. For instance, the bandwidth used by the vif may be narrower than the one configured in the channel context. To avoid confusion, return the vif's chandef in ieee80211_cfg_get_channel() instead of the chandef of the channel context. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Liad Kaufman authored
Forgot to add an entry to the struct description of sta_info. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: "Most notable changes in here: 1) By far the biggest accomplishment, thanks to a large range of contributors, is the addition of multi-send for transmit. This is the result of discussions back in Chicago, and the hard work of several individuals. Now, when the ->ndo_start_xmit() method of a driver sees skb->xmit_more as true, it can choose to defer the doorbell telling the driver to start processing the new TX queue entires. skb->xmit_more means that the generic networking is guaranteed to call the driver immediately with another SKB to send. There is logic added to the qdisc layer to dequeue multiple packets at a time, and the handling mis-predicted offloads in software is now done with no locks held. Finally, pktgen is extended to have a "burst" parameter that can be used to test a multi-send implementation. Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4, virtio_net Adding support is almost trivial, so export more drivers to support this optimization soon. I want to thank, in no particular or implied order, Jesper Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann, David Tat, Hannes Frederic Sowa, and Rusty Russell. 2) PTP and timestamping support in bnx2x, from Michal Kalderon. 3) Allow adjusting the rx_copybreak threshold for a driver via ethtool, and add rx_copybreak support to enic driver. From Govindarajulu Varadarajan. 4) Significant enhancements to the generic PHY layer and the bcm7xxx driver in particular (EEE support, auto power down, etc.) from Florian Fainelli. 5) Allow raw buffers to be used for flow dissection, allowing drivers to determine the optimal "linear pull" size for devices that DMA into pools of pages. The objective is to get exactly the necessary amount of headers into the linear SKB area pre-pulled, but no more. The new interface drivers use is eth_get_headlen(). From WANG Cong, with driver conversions (several had their own by-hand duplicated implementations) by Alexander Duyck and Eric Dumazet. 6) Support checksumming more smoothly and efficiently for encapsulations, and add "foo over UDP" facility. From Tom Herbert. 7) Add Broadcom SF2 switch driver to DSA layer, from Florian Fainelli. 8) eBPF now can load programs via a system call and has an extensive testsuite. Alexei Starovoitov and Daniel Borkmann. 9) Major overhaul of the packet scheduler to use RCU in several major areas such as the classifiers and rate estimators. From John Fastabend. 10) Add driver for Intel FM10000 Ethernet Switch, from Alexander Duyck. 11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric Dumazet. 12) Add Datacenter TCP congestion control algorithm support, From Florian Westphal. 13) Reorganize sk_buff so that __copy_skb_header() is significantly faster. From Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits) netlabel: directly return netlbl_unlabel_genl_init() net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers net: description of dma_cookie cause make xmldocs warning cxgb4: clean up a type issue cxgb4: potential shift wrapping bug i40e: skb->xmit_more support net: fs_enet: Add NAPI TX net: fs_enet: Remove non NAPI RX r8169:add support for RTL8168EP net_sched: copy exts->type in tcf_exts_change() wimax: convert printk to pr_foo() af_unix: remove 0 assignment on static ipv6: Do not warn for informational ICMP messages, regardless of type. Update Intel Ethernet Driver maintainers list bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING tipc: fix bug in multicast congestion handling net: better IFF_XMIT_DST_RELEASE support net/mlx4_en: remove NETDEV_TX_BUSY 3c59x: fix bad split of cpu_to_le32(pci_map_single()) net: bcmgenet: fix Tx ring priority programming ...
-
- 08 Oct, 2014 34 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM64 SoC changes from Arnd Bergmann: "Starting with 3.18, we are merging SoC-specific changes for arm64 through the arm-soc tree, like we have been doing for arm32. This time, there is only one set of changes, adding support for the Cavium "Thunder" Soc family. Since the changes are relatively small, this includes Kconfig, defconfig and DT changes. If all goes well, we will never require adding actual C source code for platform support in arm64, given that the architecture is more clearly defined and we have moved out a lot of the platform specifics into device drivers for arm32 already" * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64, defconfig: Enable Cavium Thunder SoC in defconfig arm64, thunder: Add Kconfig option for Cavium Thunder SoC Family arm64, thunder: Document devicetree bindings for Cavium Thunder SoC arm64, thunder: Add initial dts for Cavium Thunder SoC
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC defconfig changes from Arnd Bergmann: "This is a collection of the various changes to defconfig files, most importantly enabling some additional platforms in the multi_v7_defconfig file" * tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) ARM: configs: fix duplicate entry in multi_v7 ARM: multi_v7_defconfig: add missing Tegra options ARM: bcm2835: enable USB_DWC2_HOST in defconfig ARM: meson: update multi_v7_defconfig ARM: multi_v7_defconfig: Enable Mediatek platform ARM: qcom: Update defconfig ARM: mvebu: add gpio-fan to mvebu_v7_defconfig ARM: mvebu: add LED class support built-in in mvebu_v7_defconfig ARM: shmobile: Enable r8a7794 SoC in shmobile_defconfig ARM: LPC32xx: defconfig update ARM: configs: Enable cpufreq-cpu0 for multi_v7_defconfig ARM: configs: Remove REGULATOR_VIRTUAL_CONSUMER from defconfigs ARM: tegra: enable Atmel touchpad in defconfig ARM: at91: sama5: update defconfig ARM: at91: at91sam9rl: update defconfig ARM: at91: at91sam9g45: update defconfig ARM: at91: at91sam9263: update defconfig ARM: at91: at91sam9261_9g10: update defconfig ARM: at91: at91sam9260_9g20: update defconfig ARM: at91: at91_dt: update defconfig ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC DT updates from Arnd Bergmann: "As usual, this is the largest branch, though this time a little under half of the total changes with 307 individual non-merge changesets. The largest changes are the addition of new machines, in particular the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support for the old i.MX1 platform. Other changes include - at91: various sam9 and sama5 updates - exynos: much extended Peach Pi/Pit (Chromebook 2) support - keystone: new peripherals - meson: added DT for meson6 SoC - mvebu: new device support for Armada 370/375 - qcom: improved support for IPQ8064 and MSM8x60 - rockchip: much improved support for rk3288 - shmobile: lots of updates all over the place - sunxi: dts license change - sunxi: more a23 device support - vexpress: CLCD DT description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits) ARM: DTS: meson: update DTSI to add watchdog node ARM: dts: keystone-k2l: fix mdio io start address ARM: dts: keystone-k2e: fix mdio io start address ARM: dts: keystone-k2e: update usb1 node for dma properties ARM: dts: keystone: fix io range for usb_phy0 Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt" Revert "ARM: dts: hix5hd2: add wdg node" ARM: dts: add rk3288 i2s controller ARM: vexpress: Add CLCD Device Tree properties ARM: bcm2835: add I2S pinctrl to device tree ARM: meson: documentation: add bindings documentation ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS ARM: dts: mt6589: Change compatible string for GIC ARM: dts: mediatek: Add compatible property for aquaris5 ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk ARM: dts: mt6589: Fix typo in GIC unit address ARM: dts: Build dtb for Mediatek board ARM: dts: keystone: fix bindings for pcie and usb clock nodes ARM: dts: keystone: k2l: Fix chip selects for SPI devices ARM: dts: keystone: add dsp gpio controllers nodes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support. Among the things new for this release are: - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3 - bcm: Added support for BCM63XX family of DSL SoCs - hisi: Added support for HiP04 server-class SoC - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC Noteworthy changes to existing SoC support are: - imx: convert i.MX1 to device tree - omap: lots of power management work - omap: base support to enable moving to standard UART driver - shmobile: lots of progress for multiplatform support, still ongoing" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits) ARM: hisi: depend on ARCH_MULTI_V7 CNS3xxx: Fix debug UART. ARM: at91: fix nommu build regression ARM: meson: add basic support for MesonX SoCs ARM: meson: debug: add debug UART for earlyprintk support irq: Export handle_fasteoi_irq ARM: mediatek: Add earlyprintk support for mt6589 ARM: hisi: Fix platmcpm compilation when ARMv6 is selected ARM: debug: fix alphanumerical order on debug uarts ARM: at91: document Atmel SMART compatibles ARM: at91: add sama5d4 support to sama5_defconfig ARM: at91: dt: add device tree file for SAMA5D4ek board ARM: at91: dt: add device tree file for SAMA5D4 SoC ARM: at91: SAMA5D4 SoC detection code and low level routines ARM: at91: introduce basic SAMA5D4 support clk: at91: add a driver for the h32mx clock ARM: pxa3xx: provide specific platform_devices for all ssp ports ARM: pxa: ssp: provide platform_device_id for PXA3xx ARM: OMAP4+: Remove static iotable mappings for SRAM ARM: OMAP4+: Move SRAM data to DT ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC cleanups from Arnd Bergmann: "This time around, the cleanup branch contains mostly code removal. A number of board files for at91, imx and msm have become obsolete because of the DT conversion and are now ready to be removed. The OMAP platform has traditionally had its own DMA engine abstraction and as this is being phased out, a lot of the original code is now unused and can be removed as well. S3C24xx can be simplified now that the restart code is a proper device driver. Finally, a number of cleanups in shmobile are done to prepare for the addition of new code in other branches" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: at91: Remove the support for the RSI EWS board arm: mach-omap2: Convert pr_warning to pr_warn ARM: OMAP: Remove unused pieces of legacy DMA API ARM: at91: remove board file for Acme Systems Fox G20 ARM: orion5x: Convert pr_warning to pr_warn ARM: S3C24XX: remove separate restart code ARM: EXYNOS: Do not calculate boot address twice ARM: sunxi: Remove sun4i reboot code from mach directory ARM: imx: Remove mach-mxt_td60 board file ARM: shmobile: armadillo800eva legacy: Use rmobile_add_devices_to_domains() ARM: shmobile: r8a7740: Clean up pm domain table ARM: shmobile: r8a7740: Use rmobile_add_devices_to_domains() ARM: shmobile: sh7372: Make domain_devices[] static __initdata ARM: shmobile: mackerel: Make domain_devices[] static __initdata clocksource: tcb_clksrc: sanitize IRQ request ARM: at91/tclib: mask interruptions at shutdown and probe ARM: at91/tclib: move initialization from alloc to probe ARM: at91/tclib: prefer using of devm_* functions ARM: clps711x: Switch CLPS711X subarch to use clk and clocksource driver ARM: shmobile: r8a7791 is now called "R-Car M2-W" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC non-critical bug fixes from Arnd Bergmann: "These are bug fixes for harmless problems that were not important enough to get fixed in 3.17. The majority of these are OMAP specific, but there are also a couple for Marvell mvebu, cns3xxx, and others, as well as some updates for the MAINTAINERS file. In particular, Robert Jarzmik and Daniel Mack now volunteered to help out maintaining the PXA platform, Krzysztof Halasa took over the cns3xxx platform, Carlo Caione is the maintainer for the new Amlogic meson platform, and Matthias Brugger is now listed for the mediatek platform he recently contributed" * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) MAINTAINERS: update Shawn's email address MAINTAINERS: condense some Tegra related entries MAINTAINERS: add Alexandre Courbot for Tegra MAINTAINERS: CNS3xxx and IXP4xx update. MAINTAINERS: Add maintainers entry for Mediatek SoCs arm, vt8500, LLVMLlinux: Use mcr instead of mcr% for mach-vt8500 MAINTAINERS: add a third maintainer to mach-bcm CNS3xxx: Fix PCIe read size limit. CNS3xxx: Fix logical PCIe topology. CNS3xxx: Fix debug UART. MAINTAINERS: Add entry for the Amlogic MesonX SoCs MAINTAINERS: update ARM pxa maintainers ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings ARM: mvebu: Netgear RN102: Use Hardware BCH ECC ARM: Kirkwood: Fix DT based DSA. ARM: OMAP2+: make of_device_ids const ARM: omap2: make arrays containing machine compatible strings const ARM: LPC32xx: Fix reset function ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC ...
-
-
Fabian Frederick authored
No need to store netlbl_unlabel_genl_init result and test it before returning. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Add two helpers so that drivers do not have to care of BQL being available or not. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jim Davis <jim.epost@gmail.com> Fixes: 29d40c90 ("net/mlx4_en: Use prefetch in tx path") Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masanari Iida authored
In commit 7bced397, dma_cookie was removed from struct skbuff. But the description of dma_cookie still exist. So the "make xmldocs" output following warning. Warning(.//include/linux/skbuff.h:609): Excess struct/union /enum/typedef member 'dma_cookie' description in 'sk_buff' Remove description of dma_cookie fix the symptom. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The tx_desc struct holds 8 __be64 values. The original code in ring_tx_db() took a tx_desc pointer then casted it to an int pointer and then casted it to a u64 pointer. It was confusing and triggered some static checker warnings. I have changed the cxgb_pio_copy() function to only take tx_desc pointers. This isn't really a loss of flexibility because anything else was buggy to begin with. I also removed the casting on the destination pointer since that was unnecessary and a bit messy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
"cntxt_id" is an unsigned int but "udb" is a u64 so there is a potential shift wrapping bug here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Support skb->xmit_more in i40e is straightforward : we need to move around i40e_maybe_stop_tx() call to correctly test netif_xmit_stopped() before taking the decision to not kick the NIC. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Christophe Leroy says: ==================== net: fs_enet: Remove non NAPI RX and add NAPI for TX When using a MPC8xx as a router, 'perf' shows a significant time spent in fs_enet_interrupt() and fs_enet_start_xmit(). 'perf annotate' shows that the time spent in fs_enet_start_xmit is indeed spent between spin_unlock_irqrestore() and the following instruction, hence in interrupt handling. This is due to the TX complete interrupt that fires after each transmitted packet. This patchset first remove all non NAPI handling as NAPI has become the only mode for RX, then adds NAPI for handling TX complete. This improves NAT TCP throughput by 21% on MPC885 with FEC. Tested on MPC885 with FEC. [PATCH 1/2] net: fs_enet: Remove non NAPI RX [PATCH 2/2] net: fs_enet: Add NAPI TX Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
LEROY Christophe authored
When using a MPC8xx as a router, 'perf' shows a significant time spent in fs_enet_interrupt() and fs_enet_start_xmit(). 'perf annotate' shows that the time spent in fs_enet_start_xmit is indeed spent between spin_unlock_irqrestore() and the following instruction, hence in interrupt handling. This is due to the TX complete interrupt that fires after each transmitted packet. This patch modifies the handling of TX complete to use NAPI. With this patch, my NAT router offers a throughput improved by 21% Original performance: [root@localhost tmp]# scp toto pgs:/tmp toto 100% 256MB 2.8MB/s 01:31 Performance with the patch: [root@localhost tmp]# scp toto pgs:/tmp toto 100% 256MB 3.4MB/s 01:16 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
LEROY Christophe authored
In the probe function, use_napi is inconditionnaly set to 1. This patch removes all the code which is conditional to !use_napi, and removes use_napi which has then become useless. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chun-Hao Lin authored
RTL8168EP is Realtek PCIe Gigabit Ethernet controller with DASH support. It is a successor chip of RTL8168DP. For RTL8168EP, the read/write ocp register is via eri channel type 2, so I move ocp_xxx() related functions under rtl_eri_xxx. And use r8168dp_ocp_xxx() for RTL8168DP ocp read/write, r8168ep_ocp_xxx() for RTL8168EP ocp read/write. The way of checking dash enable is different with RTL8168DP. I use r8168dp_check_dash()for RTL8168DP and r8168ep_check_dash() for RTL8168EP, to check if dash is enabled. The driver_start() and driver_stop() of RTL8168EP is also different with RTL8168DP. I use rtl8168dp_driver_xxx() for RTL8168DP and rtl8168ep_driver_xxx for RTL8168EP. Right now, RTL8168EP phy mcu did not need firmware code patch, so I did not add firmware code for it. so I did not add firmware code for it. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
We need to copy exts->type when committing the change, otherwise it would be always 0. This is a quick fix for -net and -stable, for net-next tcf_exts will be removed. Fixes: commit 33be6271 ("net_sched: act: use standard struct list_head") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pawel Moll authored
Because CCN's cycle counter always runs, it will generate an interrupt on overflow even if the relevant perf event was not requested, causing a spurious warning message. Fixed now by warning on only normal counter unwanted overflows. Also cleaning the overflow mask at init now, not to warn on event previously requested by firmware. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Shawn Guo authored
My Freescale email address will be gone shortly. Update my email to be the Linaro one. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Stephen Warren authored
There's little point having specific entries in MAINTAINERS for Tegra drivers that are already covered by the top-level Tegra architecture support entry, and maintained by people listed there. Remove the duplicates. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Stephen Warren authored
I'd like to propose Alexandre Courbot as an additional Tegra maintainer. He's been working on a variety of Tegra-related code for a while, and is now officially tasked with working on upstream support. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> -- v2: * Use Alexandre's full name. * Use a non-NVIDIA email address to avoid Exchange Server patch corruption. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
https://github.com/carlocaione/linux-mesonArnd Bergmann authored
Merge "Meson6 WDT support" from Carlo Caione: This patch adds the support for the Meson6 watchdog in the DTSI * tag 'meson-wdt-dt-3.18' of https://github.com/carlocaione/linux-meson: ARM: DTS: meson: update DTSI to add watchdog node Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "This patch-set introduces a couple of new features such as large sector size, FITRIM, and atomic/volatile writes. Several patches enhance power-off recovery and checkpoint routines. The fsck.f2fs starts to support fixing corrupted partitions with recovery hints provided by this patch-set. Summary: - retain some recovery information for fsck.f2fs - enhance checkpoint speed - enhance flush command management - bug fix for lseek - tune in-place-update policies - enhance roll-forward speed - revisit all the roll-forward and fsync rules - support larget sector size - support FITRIM - support atomic and volatile writes And several clean-ups and bug fixes are included" * tag 'f2fs-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits) f2fs: support volatile operations for transient data f2fs: support atomic writes f2fs: remove unused return value f2fs: clean up f2fs_ioctl functions f2fs: potential shift wrapping buf in f2fs_trim_fs() f2fs: call f2fs_unlock_op after error was handled f2fs: check the use of macros on block counts and addresses f2fs: refactor flush_nat_entries to remove costly reorganizing ops f2fs: introduce FITRIM in f2fs_ioctl f2fs: introduce cp_control structure f2fs: use more free segments until SSR is activated f2fs: change the ipu_policy option to enable combinations f2fs: fix to search whole dirty segmap when get_victim f2fs: fix to clean previous mount option when remount_fs f2fs: skip punching hole in special condition f2fs: support large sector size f2fs: fix to truncate blocks past EOF in ->setattr f2fs: update i_size when __allocate_data_block f2fs: use MAX_BIO_BLOCKS(sbi) f2fs: remove redundant operation during roll-forward recovery ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "Highlights: - support the NFSv4.2 SEEK operation (allowing clients to support SEEK_HOLE/SEEK_DATA), thanks to Anna. - end the grace period early in a number of cases, mitigating a long-standing annoyance, thanks to Jeff - improve SMP scalability, thanks to Trond" * 'for-3.18' of git://linux-nfs.org/~bfields/linux: (55 commits) nfsd: eliminate "to_delegation" define NFSD: Implement SEEK NFSD: Add generic v4.2 infrastructure svcrdma: advertise the correct max payload nfsd: introduce nfsd4_callback_ops nfsd: split nfsd4_callback initialization and use nfsd: introduce a generic nfsd4_cb nfsd: remove nfsd4_callback.cb_op nfsd: do not clear rpc_resp in nfsd4_cb_done_sequence nfsd: fix nfsd4_cb_recall_done error handling nfsd4: clarify how grace period ends nfsd4: stop grace_time update at end of grace period nfsd: skip subsequent UMH "create" operations after the first one for v4.0 clients nfsd: set and test NFSD4_CLIENT_STABLE bit to reduce nfsdcltrack upcalls nfsd: serialize nfsdcltrack upcalls for a particular client nfsd: pass extra info in env vars to upcalls to allow for early grace period end nfsd: add a v4_end_grace file to /proc/fs/nfsd lockd: add a /proc/fs/lockd/nlm_end_grace file nfsd: reject reclaim request when client has already sent RECLAIM_COMPLETE nfsd: remove redundant boot_time parm from grace_done client tracking op ...
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Highlights include: Stable fixes: - fix an NFSv4.1 state renewal regression - fix open/lock state recovery error handling - fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails - fix statd when reconnection fails - don't wake tasks during connection abort - don't start reboot recovery if lease check fails - fix duplicate proc entries Features: - pNFS block driver fixes and clean ups from Christoph - More code cleanups from Anna - Improve mmap() writeback performance - Replace use of PF_TRANS with a more generic mechanism for avoiding deadlocks in nfs_release_page" * tag 'nfs-for-3.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (66 commits) NFSv4.1: Fix an NFSv4.1 state renewal regression NFSv4: fix open/lock state recovery error handling NFSv4: Fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails NFS: Fabricate fscache server index key correctly SUNRPC: Add missing support for RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT NFSv3: Fix missing includes of nfs3_fs.h NFS/SUNRPC: Remove other deadlock-avoidance mechanisms in nfs_release_page() NFS: avoid waiting at all in nfs_release_page when congested. NFS: avoid deadlocks with loop-back mounted NFS filesystems. MM: export page_wakeup functions SCHED: add some "wait..on_bit...timeout()" interfaces. NFS: don't use STABLE writes during writeback. NFSv4: use exponential retry on NFS4ERR_DELAY for async requests. rpc: Add -EPERM processing for xs_udp_send_request() rpc: return sent and err from xs_sendpages() lockd: Try to reconnect if statd has moved SUNRPC: Don't wake tasks during connection abort Fixing lease renewal nfs: fix duplicate proc entries pnfs/blocklayout: Fix a 64-bit division/remainder issue in bl_map_stripe ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver updates from Greg KH: "Here's the big set of driver patches for char/misc drivers. Nothing major in here, the shortlog goes into the details. All have been in the linux-next tree for a while with no issues" * tag 'char-misc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (80 commits) mei: mei_txe_fw_sts can be static mei: fix kernel-doc warnings mei: fix KDoc documentation formatting mei: drop me_client_presentation_num mei: trivial: fix errors in prints in comments mei: remove include to pci header from mei module files mei: push pci cfg structure me hw mei: remove the reference to pdev from mei_device mei: move fw_status back to hw ops handlers mei: get rid of most of the pci dependencies in mei mei: push all standard settings into mei_device_init mei: move mei_hbm_hdr function from hbm.h the hbm.c mei: kill error message for allocation failure mei: nfc: fix style warning mei: fix style warning: Missing a blank line after declarations mei: pg: fix cat and paste error in comments mei: debugfs: add single buffer indicator mei: debugfs: adjust print buffer mei: add hbm and pg state in devstate debugfs print Drivers: hv: vmbus: Enable interrupt driven flow control ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull compression update from Greg KH: "More fun with the LZO compression code. Here's some patches that properly document what the logic is, and fix up all of the previously reported issues against the LZO code. This has been in linux-next for a while with no issues" * tag 'compress-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: lzo: check for length overrun in variable length encoding. Revert "lzo: properly check for overruns" Documentation: lzo: document part of the encoding
-
Linus Torvalds authored
Merge tag 'driver-core-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the driver core patches for 3.18-rc1. Just a few small things, and the addition of a new interface to dump firmware "core dumps" to userspace through sysfs that the wireless and graphic drivers want to use. All of these have been in linux-next for a while" * tag 'driver-core-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: dynamic_debug: change __dynamic_<foo>_dbg return types to void driver/base/node: remove unnecessary kfree of node struct from unregister_one_node devres: Improve devm_kasprintf()/kvasprintf() support Documentation: devres: Add missing devm_kstrdup() managed interface Documentation: devres: Add missing IRQ functions firmware_class: make sure fw requests contain a name driver core: Remove kerneldoc from local function attribute_container: fix coding style issues attribute_container: fix whitespace errors drivers/base: Fix length checks in create_syslog_header()/dev_vprintk_emit() device coredump: add new device coredump class Documentation/sysfs-rules.txt: Add device attribute error code documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver updates from Greg KH: "Here's the big tty/serial driver patchset for 3.18-rc1. Lots of little things in here, some good work from Peter Hurley on the tty core, and in lots of drivers. There are also lots of other driver updates in here as well, full details in the changelogs. All have been in the linux-next tree for a while" * tag 'tty-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (99 commits) Revert "serial/core: Initialize the console pm state" tty: serial: 8250: use 32bit variable for rpm_tx_active tty: serial: msm: Add earlycon support serial/core: Initialize the console pm state serial: asc: Conditionally use readl_relaxed (COMPILE_TEST) serial: of-serial: add PM suspend/resume support m68k: AMIGA_BUILTIN_SERIAL should depend on TTY asm/uapi: Add definition of TIOC[SG]RS485 tty/metag_da: Add console_poll module parameter serial: 8250_pci: remove rts_n override from Baytrail quirk serial: cadence: Add generic earlycon support serial: imx: change the wait even to interruptiable serial: imx: terminate the RX DMA when the UART is suspending serial: imx: fix throttle/unthrottle callbacks for hardware assisted flow control serial: 8250: Add Quark X1000 to 8250_pci.c tty: omap-serial: pull out calculation from baud_is_mode16 tty: omap-serial: fix division by zero xen_hvc: no reason to write the type key on xenstore tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging updates from Greg KH: "Here is the big staging patch set for 3.18-rc1. Once again, we are deleting more code than we added, with something like 150000 lines deleted overall. Some of this is due to drivers being added to the networking tree, so the old versions are removed here, but even then, the overall difference is quite good. Other than driver deletions, lots and lots and lots of minor cleanups all over the place. Full details are in the changelog" * tag 'staging-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1481 commits) staging: et131x: Remove et131x driver from drivers/staging staging: emxx_udc: Use min_t instead of min staging: emxx_udc: Fix replace printk(KERN_DEBUG ..) with dev_dbg staging: media: Fixed else after return or break warning staging: media: omap4iss: Fixed else after return or break warning staging: rtl8712: Fixed else not required after return staging: rtl8712: Fix missing blank line warning staging: rtl8192e: rtl8192e: Remove spaces before the semicolons staging: rtl8192e: rtl8192e: Remove unnecessary return statements staging: rtl8192e: Remove unneeded void return staging: rtl8192e: Fix void function return statements style staging: rtl8712: Fix unnecessary parentheses style warning staging: rtl8192e: Fix unnecessary space before function pointer arguments staging: rtl8192e: Array was made static const char * const staging: ft1000: ft1000-usb: Removed unnecessary else statement. staging: ft1000: ft1000-usb: Removed unnecessary else statement. staging: ft1000: ft1000-usb: Removed unnecessary parentheses. staging: ft1000: ft1000-usb: Added new line after declarations. staging: vt6655: Fixed C99 // comment errors in wpactl.c staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h> ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB updates from Greg KH: "Here's the big USB patchset for 3.18-rc1. Also in here is the PHY tree, as it seems to fit well with the USB tree for various reasons... Anyway, lots of little changes in here, all over the place, full details in the changelog All have been in the linux-next tree for a while with no issues" * tag 'usb-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (244 commits) USB: host: st: fix typo 'CONFIG_USB_EHCI_HCD_ST' uas: Reduce number of function arguments for uas_alloc_foo functions xhci: Allow xHCI drivers to be built as separate modules xhci: Export symbols used by host-controller drivers xhci: Check for XHCI_COMP_MODE_QUIRK when disabling D3cold xhci: Introduce xhci_init_driver() usb: hcd: add generic PHY support usb: rename phy to usb_phy in HCD usb: gadget: uvc: fix up uvcg_v4l2_get_unmapped_area typo USB: host: st: fix ehci/ohci driver selection usb: host: ehci-exynos: Remove unnecessary usb-phy support usb: core: return -ENOTSUPP for all targeted hosts USB: Remove .owner field for driver usb: core: log higher level message on malformed LANGID descriptor usb: Add LED triggers for USB activity usb: Rename usb-common.c usb: gadget: Refactor request completion usb: gadget: Introduce usb_gadget_giveback_request() usb: dwc2/gadget: move phy bus legth initialization phy: remove .owner field for drivers using module_platform_driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto update from Herbert Xu: - add multibuffer infrastructure (single_task_running scheduler helper, OKed by Peter on lkml. - add SHA1 multibuffer implementation for AVX2. - reenable "by8" AVX CTR optimisation after fixing counter overflow. - add APM X-Gene SoC RNG support. - SHA256/SHA512 now handles unaligned input correctly. - set lz4 decompressed length correctly. - fix algif socket buffer allocation failure for 64K page machines. - misc fixes * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (47 commits) crypto: sha - Handle unaligned input data in generic sha256 and sha512. Revert "crypto: aesni - disable "by8" AVX CTR optimization" crypto: aesni - remove unused defines in "by8" variant crypto: aesni - fix counter overflow handling in "by8" variant hwrng: printk replacement crypto: qat - Removed unneeded partial state crypto: qat - Fix typo in name of tasklet_struct crypto: caam - Dynamic allocation of addresses for various memory blocks in CAAM. crypto: mcryptd - Fix typos in CRYPTO_MCRYPTD description crypto: algif - avoid excessive use of socket buffer in skcipher arm64: dts: add random number generator dts node to APM X-Gene platform. Documentation: rng: Add X-Gene SoC RNG driver documentation hwrng: xgene - add support for APM X-Gene SoC RNG support crypto: mv_cesa - Add missing #define crypto: testmgr - add test for lz4 and lz4hc crypto: lz4,lz4hc - fix decompression crypto: qat - Use pci_enable_msix_exact() instead of pci_enable_msix() crypto: drbg - fix maximum value checks on 32 bit systems crypto: drbg - fix sparse warning for cpu_to_be[32|64] crypto: sha-mb - sha1_mb_alg_state can be static ...
-