- 06 Jun, 2015 6 commits
-
-
Kirill A. Shutemov authored
commit 51b97e35 upstream. Sasha Levin reports: "gcc5 changes the default standard to c11, which makes kernel build unhappy Explicitly define the kernel standard to be gnu89 which should keep everything working exactly like it was before gcc5" There are multiple small issues with the new default, but the biggest issue seems to be that the old - and very useful - GNU extension to allow a cast in front of an initializer has gone away. Patch updated by Kirill: "I'm pretty sure all gcc versions you can build kernel with supports -std=gnu89. cc-option is redunrant. We also need to adjust HOSTCFLAGS otherwise allmodconfig fails for me" Note by Andrew Pinski: "Yes it was reported and both problems relating to this extension has been added to gnu99 and gnu11. Though there are other issues with the kernel dealing with extern inline have different semantics between gnu89 and gnu99/11" End result: we may be able to move up to a newer stdc model eventually, but right now the newer models have some annoying deficiencies, so the traditional "gnu89" model ends up being the preferred one. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Singed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Behan Webster authored
commit 62ec95f8 upstream. rtllib_probe_req is defined as "static inline" in rtllib_softmac.c however it is declared differently as "extern inline" in rtllib_softmac.h. Since it isn't used outside of the scope of rtllib_softmac, it makes sense to remove the incorrect declaration. Signed-off-by:
Behan Webster <behanw@converseincode.com> Suggested-by:
Arnd Bergmann <arnd@arndb.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
commit 0c9f3a65 upstream. The rtl8712 driver has an 'extern inline' function that contains an 'if', which causes lots of warnings with CONFIG_PROFILE_ALL_BRANCHES overriding the definition of 'if': drivers/staging/rtl8712/ieee80211.h:759:229: warning: '______f' is static but declared in inline function 'ieee80211_get_hdrlen' which is not static [enabled by default] This changes the driver to use 'static inline' instead, which happens to be the correct annotation anyway. Signed-off-by:
-
Behan Webster authored
commit 6d91857d upstream. With compilers which follow the C99 standard (like modern versions of gcc and clang), "extern inline" does the opposite thing from older versions of gcc (emits code for an externally linkable version of the inline function). "static inline" does the intended behavior in all cases instead. Signed-off-by:
-
Jan-Simon Möller authored
commit 8f375e10 upstream. Description: intel_gmbus_is_forced_bit is no extern as its body is right below. Likewise for intel_gmbus_is_port_valid. This fixes a compilation issue with clang. An initial version of this patch was developed by PaX Team <pageexec at freemail.hu>. This is respin of this patch. 20130509: v2: (re-)add inline upon request. Signed-off-by:
Jan-Simon Möller <dl9pf@gmx.de> CC: pageexec@freemail.hu CC: daniel.vetter@ffwll.ch CC: airlied@linux.ie CC: intel-gfx@lists.freedesktop.org CC: dri-devel@lists.freedesktop.org CC: linux-kernel@vger.kernel.org [danvet: Bikeshed commit message.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Greg Kroah-Hartman authored
Patch not upstream as this driver is deleted there. Fix up some "extern inline" functions as they break the build when using a "modern" complier (i.e. gcc5). Signed-off-by:
-
- 17 May, 2015 18 commits
-
-
Greg Kroah-Hartman authored
-
Lv Zheng authored
commit 6d3fd3cc upstream. ACPICA commit 154f6d074dd38d6ebc0467ad454454e6c5c9ecdf There are code pieces converting pointers using "(acpi_physical_address) x" or "ACPI_CAST_PTR (t, x)" formats, this patch cleans up them. Known issues: 1. Cleanup of "(ACPI_PHYSICAL_ADDRRESS) x" for a table field For the conversions around the table fields, it is better to fix it with alignment also fixed. So this patch doesn't modify such code. There should be no functional problem by leaving them unchanged. Link: https://github.com/acpica/acpica/commit/154f6d07Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Dirk Behme <dirk.behme@gmail.com> Signed-off-by:
George G. Davis <george_davis@mentor.com> Signed-off-by:
-
Lv Zheng authored
commit f254e3c5 upstream. ACPICA commit 7d9fd64397d7c38899d3dc497525f6e6b044e0e3 OSPMs like Linux expect an acpi_physical_address returning value from acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't equal to sizeof (acpi_physical_address): drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default] In file included from include/acpi/acpi.h:64:0, from include/linux/acpi.h:36, from drivers/acpi/osl.c:41: include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *' This patch corrects acpi_find_root_pointer(). Link: https://github.com/acpica/acpica/commit/7d9fd643Signed-off-by:
-
Christoph Hellwig authored
commit fc21c0cf upstream. This commit was incomplete in that code to remove items from the per-cpu lists was missing and never acquired a user in the 5 years it has been in the tree. We're going to implement what it seems to try to archive in a simpler way, and this code is in the way of doing so. Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alexey Khoroshilov authored
commit bc26d4d0 upstream. A deadlock can be initiated by userspace via ioctl(SNDCTL_SEQ_OUTOFBAND) on /dev/sequencer with TMR_ECHO midi event. In this case the control flow is: sound_ioctl() -> case SND_DEV_SEQ: case SND_DEV_SEQ2: sequencer_ioctl() -> case SNDCTL_SEQ_OUTOFBAND: spin_lock_irqsave(&lock,flags); play_event(); -> case EV_TIMING: seq_timing_event() -> case TMR_ECHO: seq_copy_to_input() -> spin_lock_irqsave(&lock,flags); It seems that spin_lock_irqsave() around play_event() is not necessary, because the only other call location in seq_startplay() makes the call without acquiring spinlock. So, the patch just removes spinlocks around play_event(). By the way, it removes unreachable code in seq_timing_event(), since (seq_mode == SEQ_2) case is handled in the beginning. Compile tested only. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Chuanxiao Dong authored
commit 4e93b9a6 upstream. During kernel boot, it will try to read some logical sectors of each block device node for the possible partition table. But since RPMB partition is special and can not be accessed by normal eMMC read / write CMDs, it will cause below error messages during kernel boot: ... mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00 mmcblk0rpmb: retrying using single block read mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 end_request: I/O error, dev mmcblk0rpmb, sector 0 Buffer I/O error on device mmcblk0rpmb, logical block 0 end_request: I/O error, dev mmcblk0rpmb, sector 8 Buffer I/O error on device mmcblk0rpmb, logical block 1 end_request: I/O error, dev mmcblk0rpmb, sector 16 Buffer I/O error on device mmcblk0rpmb, logical block 2 end_request: I/O error, dev mmcblk0rpmb, sector 24 Buffer I/O error on device mmcblk0rpmb, logical block 3 ... This patch will discard the access request in eMMC queue if it is RPMB partition access request. By this way, it avoids trigger above error messages. Fixes: 090d25fe ("mmc: core: Expose access to RPMB partition") Signed-off-by:
Yunpeng Gao <yunpeng.gao@intel.com> Signed-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Tested-by:
Michael Shigorin <mike@altlinux.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Doug Anderson authored
commit c5272a28 upstream. Way back, when the world was a simpler place and there was no war, no evil, and no kernel bugs, there was just a single pinctrl lock. That was how the world was when (57291ce2 pinctrl: core device tree mapping table parsing support) was written. In that case, there were instances where the pinctrl mutex was already held when pinctrl_register_map() was called, hence a "locked" parameter was passed to the function to indicate that the mutex was already locked (so we shouldn't lock it again). A few years ago in (42fed7ba pinctrl: move subsystem mutex to pinctrl_dev struct), we switched to a separate pinctrl_maps_mutex. ...but (oops) we forgot to re-think about the whole "locked" parameter for pinctrl_register_map(). Basically the "locked" parameter appears to still refer to whether the bigger pinctrl_dev mutex is locked, but we're using it to skip locks of our (now separate) pinctrl_maps_mutex. That's kind of a bad thing(TM). Probably nobody noticed because most of the calls to pinctrl_register_map happen at boot time and we've got synchronous device probing. ...and even cases where we're asynchronous don't end up actually hitting the race too often. ...but after banging my head against the wall for a bug that reproduced 1 out of 1000 reboots and lots of looking through kgdb, I finally noticed this. Anyway, we can now safely remove the "locked" parameter and go back to a war-free, evil-free, and kernel-bug-free world. Fixes: 42fed7ba ("pinctrl: move subsystem mutex to pinctrl_dev struct") Signed-off-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Lukas Wunner authored
commit 3916e3fd upstream. Single channel LVDS maxes out at 112 MHz. The 15" pre-retina models shipped with 1440x900 (106 MHz) by default or 1680x1050 (119 MHz) as a BTO option, both versions used dual channel LVDS even though the smaller one would have fit into a single channel. Notes: Bug report showing that the MacBookPro8,2 with 1440x900 uses dual channel LVDS (this lead to it being hardcoded in intel_lvds.c by Daniel Vetter with commit 618563e3): https://bugzilla.kernel.org/show_bug.cgi?id=42842 If i915.lvds_channel_mode=2 is missing even though the machine needs it, every other vertical line is white and consequently, only the left half of the screen is visible (verified by myself on a MacBookPro9,1). Forum posting concerning a MacBookPro6,2 with 1440x900, author is using i915.lvds_channel_mode=2 on the kernel command line, proving that the machine uses dual channels: https://bbs.archlinux.org/viewtopic.php?id=185770 Chi Mei N154C6-L04 with 1440x900 is a replacement panel for all MacBook Pro "A1286" models, and that model number encompasses the MacBookPro6,2 / 8,2 / 9,1. Page 17 of the panel's datasheet shows it's driven with dual channel LVDS: http://www.ebay.com/itm/-/400690878560 http://www.everymac.com/ultimate-mac-lookup/?search_keywords=A1286 http://www.taopanel.com/chimei/datasheet/N154C6-L04.pdf Those three 15" models, MacBookPro6,2 / 8,2 / 9,1, are the only ones with i915 graphics and dual channel LVDS, so that list should be complete. And the 8,2 is already in intel_lvds.c. Possible motivation to use dual channel LVDS even on the 1440x900 models: Reduce the number of different parts, i.e. use identical logic boards and display cabling on both versions and the only differing component is the panel. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
Jani Nikula <jani.nikula@intel.com> [Jani: included notes in the commit message for posterity] Signed-off-by:
-
Gregory CLEMENT authored
commit 750e30d4 upstream. There is no crystal connected to the internal RTC on the Open Block AX3. So let's disable it in order to prevent the kernel probing the driver uselessly. Eventually this patches removes the following warning message from the boot log: "rtc-mv d0010300.rtc: internal RTC not ticking" Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Stefan Wahren authored
commit 0fdebe1a upstream. The dr_mode of usb0 on imx233-olinuxino is left to default "otg". Since the green LED (GPIO2_1) on imx233-olinuxino is connected to the same pin as USB_OTG_ID it's possible to disable USB host by LED toggling: echo 0 > /sys/class/leds/green/brightness [ 1068.890000] ci_hdrc ci_hdrc.0: remove, state 1 [ 1068.890000] usb usb1: USB disconnect, device number 1 [ 1068.920000] usb 1-1: USB disconnect, device number 2 [ 1068.920000] usb 1-1.1: USB disconnect, device number 3 [ 1069.070000] usb 1-1.2: USB disconnect, device number 4 [ 1069.450000] ci_hdrc ci_hdrc.0: USB bus 1 deregistered [ 1074.460000] ci_hdrc ci_hdrc.0: timeout waiting for 00000800 in 11 This patch fixes the issue by setting dr_mode to "host" in the dts file. Reported-by:
Harald Geyer <harald@ccbib.org> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by:
Marek Vasut <marex@denx.de> Acked-by:
Peter Chen <peter.chen@freescale.com> Fixes: b4931294 ("ARM: dts: imx23-olinuxino: Add USB host support") Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Marek Vasut authored
commit 4ada77e3 upstream. Fix a typo in the TX DMA interrupt name for AUART4. This patch makes AUART4 operational again. Signed-off-by:
-
Markus Pargmann authored
commit f90d3f0d upstream. The property '#pwm-cells' is currently missing. It is not possible to use pwm4 without this property. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Fixes: 5658a68f ("ARM i.MX25: Add devicetree") Reviewed-by:
-
Johan Hovold authored
commit 483d8211 upstream. Unregister GPIOs requested through sysfs at chip remove to avoid leaking the associated memory and sysfs entries. The stale sysfs entries prevented the gpio numbers from being exported when the gpio range was later reused (e.g. at device reconnect). This also fixes the related module-reference leak. Note that kernfs makes sure that any on-going sysfs operations finish before the class devices are unregistered and that further accesses fail. The chip exported flag is used to prevent gpiod exports during removal. This also makes it harder to trigger, but does not fix, the related race between gpiochip_remove and export_store, which is really a race with gpiod_request that needs to be addressed separately. Also note that this would prevent the crashes (e.g. NULL-dereferences) at reconnect that affects pre-3.18 kernels, as well as use-after-free on operations on open attribute files on pre-3.14 kernels (prior to kernfs). Fixes: d8f388d8 ("gpio: sysfs interface") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 01cca93a upstream. Unregister gpiochip device (used to export information through sysfs) before removing it internally. This way removal will reverse addition. Signed-off-by:
-
Boris Ostrovsky authored
commit b9d934f2 upstream. After a resume the hypervisor/tools may change console event channel number. We should re-query it. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Naoya Horiguchi authored
commit 09789e5d upstream. Currently memory_failure() calls shake_page() to sweep pages out from pcplists only when the victim page is 4kB LRU page or thp head page. But we should do this for a thp tail page too. Consider that a memory error hits a thp tail page whose head page is on a pcplist when memory_failure() runs. Then, the current kernel skips shake_pages() part, so hwpoison_user_mappings() returns without calling split_huge_page() nor try_to_unmap() because PageLRU of the thp head is still cleared due to the skip of shake_page(). As a result, me_huge_page() runs for the thp, which is broken behavior. One effect is a leak of the thp. And another is to fail to isolate the memory error, so later access to the error address causes another MCE, which kills the processes which used the thp. This patch fixes this problem by calling shake_page() for thp tail case. Fixes: 385de357 ("thp: allow a hwpoisoned head page to be put back to LRU") Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Dean Nelson <dnelson@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by:
-
Ryusuke Konishi authored
commit d8fd150f upstream. The range check for b-tree level parameter in nilfs_btree_root_broken() is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even though the level is limited to values in the range of 0 to (NILFS_BTREE_LEVEL_MAX - 1). Since the level parameter is read from storage device and used to index nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it can cause memory overrun during btree operations if the boundary value is set to the level parameter on device. This fixes the broken sanity check and adds a comment to clarify that the upper bound NILFS_BTREE_LEVEL_MAX is exclusive. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Junxiao Bi authored
commit b1432a2a upstream. There is a race window in dlm_get_lock_resource(), which may return a lock resource which has been purged. This will cause the process to hang forever in dlmlock() as the ast msg can't be handled due to its lock resource not existing. dlm_get_lock_resource { ... spin_lock(&dlm->spinlock); tmpres = __dlm_lookup_lockres_full(dlm, lockid, namelen, hash); if (tmpres) { spin_unlock(&dlm->spinlock); >>>>>>>> race window, dlm_run_purge_list() may run and purge the lock resource spin_lock(&tmpres->spinlock); ... spin_unlock(&tmpres->spinlock); } } Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
- 13 May, 2015 16 commits
-
-
Greg Kroah-Hartman authored
-
Vineet Gupta authored
commit e4140819 upstream. A malicious signal handler / restorer can DOS the system by fudging the user regs saved on stack, causing weird things such as sigreturn returning to user mode PC but cpu state still being kernel mode.... Ensure that in sigreturn path status32 always has U bit; any other bogosity (gargbage PC etc) will be taken care of by normal user mode exceptions mechanisms. Reproducer signal handler: void handle_sig(int signo, siginfo_t *info, void *context) { ucontext_t *uc = context; struct user_regs_struct *regs = &(uc->uc_mcontext.regs); regs->scratch.status32 = 0; } Before the fix, kernel would go off to weeds like below: --------->8----------- [ARCLinux]$ ./signal-test Path: /signal-test CPU: 0 PID: 61 Comm: signal-test Not tainted 4.0.0-rc5+ #65 task: 8f177880 ti: 5ffe6000 task.ti: 8f15c000 [ECR ]: 0x00220200 => Invalid Write @ 0x00000010 by insn @ 0x00010698 [EFA ]: 0x00000010 [BLINK ]: 0x2007c1ee [ERET ]: 0x10698 [STAT32]: 0x00000000 : <-------- BTA: 0x00010680 SP: 0x5ffe7e48 FP: 0x00000000 LPS: 0x20003c6c LPE: 0x20003c70 LPC: 0x00000000 ... --------->8----------- Reported-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
hujianyang authored
commit 9aa272b4 upstream. Running mtd-utils/tests/ubi-tests/io_basic.c could cause soft lockup or watchdog reset. It is because *updatevol* will perform ubi_check_volume() after updating finish and this function will full scan the updated lebs if the volume is initialized as STATIC_VOLUME. This patch adds *cond_resched()* in the loop of lebs scan to avoid soft lockup. Helped by Richard Weinberger <richard@nod.at> [ 2158.067096] INFO: rcu_sched self-detected stall on CPU { 1} (t=2101 jiffies g=1606 c=1605 q=56) [ 2158.172867] CPU: 1 PID: 2073 Comm: io_basic Tainted: G O 3.10.53 #21 [ 2158.172898] [<c000f624>] (unwind_backtrace+0x0/0x120) from [<c000c294>] (show_stack+0x10/0x14) [ 2158.172918] [<c000c294>] (show_stack+0x10/0x14) from [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) [ 2158.172936] [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) from [<c002b480>] (update_process_times+0x38/0x64) [ 2158.172953] [<c002b480>] (update_process_times+0x38/0x64) from [<c005ff38>] (tick_sched_handle+0x54/0x60) [ 2158.172966] [<c005ff38>] (tick_sched_handle+0x54/0x60) from [<c00601ac>] (tick_sched_timer+0x44/0x74) [ 2158.172978] [<c00601ac>] (tick_sched_timer+0x44/0x74) from [<c003f348>] (__run_hrtimer+0xc8/0x1b8) [ 2158.172992] [<c003f348>] (__run_hrtimer+0xc8/0x1b8) from [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) [ 2158.173007] [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) from [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) [ 2158.173022] [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) from [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) [ 2158.173036] [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) from [<c0082bd8>] (generic_handle_irq+0x20/0x30) [ 2158.173049] [<c0082bd8>] (generic_handle_irq+0x20/0x30) from [<c000969c>] (handle_IRQ+0x64/0x8c) [ 2158.173060] [<c000969c>] (handle_IRQ+0x64/0x8c) from [<c0008544>] (gic_handle_irq+0x3c/0x60) [ 2158.173074] [<c0008544>] (gic_handle_irq+0x3c/0x60) from [<c02f0f80>] (__irq_svc+0x40/0x50) [ 2158.173083] Exception stack(0xc4043c98 to 0xc4043ce0) [ 2158.173092] 3c80: c4043ce4 00000019 [ 2158.173102] 3ca0: 1f8a865f c050ad10 1f8a864c 00000031 c04b5970 0003ebce 00000000 f3550000 [ 2158.173113] 3cc0: bf00bc68 00000800 0003ebce c4043ce0 c0186d14 c0186cb8 80000013 ffffffff [ 2158.173130] [<c02f0f80>] (__irq_svc+0x40/0x50) from [<c0186cb8>] (read_current_timer+0x4/0x38) [ 2158.173145] [<c0186cb8>] (read_current_timer+0x4/0x38) from [<1f8a865f>] (0x1f8a865f) [ 2183.927097] BUG: soft lockup - CPU#1 stuck for 22s! [io_basic:2073] [ 2184.002229] Modules linked in: nandflash(O) [last unloaded: nandflash] Signed-off-by:
Wang Kai <morgan.wang@huawei.com> Signed-off-by:
hujianyang <hujianyang@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
K. Y. Srinivasan authored
commit 73cffdb6 upstream. Don't wait after sending request for offers to the host. This wait is unnecessary and simply adds 5 seconds to the boot time. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sebastian Hesselbarth authored
commit a74cd13b upstream. Fix Dove's register addresses of uart2 and uart3 nodes that seem to be broken since ages due to a copy-and-paste error. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by:
-
Sudip Mukherjee authored
commit 2c20d92d upstream. the lcd type as defined in the Kconfig is not matching in the code. as a result the rs, rw and en pins were getting interchanged. Kconfig defines the value of PANEL_LCD to be 1 if we select custom configuration but in the code LCD_TYPE_CUSTOM is defined as 5. my hardware is LCD_TYPE_CUSTOM, but the pins were assigned to it as pins of LCD_TYPE_OLD, and it was not working. Now values are corrected with referenece to the values defined in Kconfig and it is working. checked on JHD204A lcd with LCD_TYPE_CUSTOM configuration. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Acked-by:
Willy Tarreau <w@1wt.eu> [wt: backport to 3.10 and 3.14] Signed-off-by:
-
Andrzej Pietrasiewicz authored
commit eb132ccb upstream. Function-specific setup requests should be handled in such a way, that apart from filling in the data buffer, the requests are also actually enqueued: if function-specific setup is called from composte_setup(), the "usb_ep_queue()" block of code in composite_setup() is skipped. The printer function lacks this part and it results in e.g. get device id requests failing: the host expects some response, the device prepares it but does not equeue it for sending to the host, so the host finally asserts timeout. This patch adds enqueueing the prepared responses. Fixes: 2e87edf4: "usb: gadget: make g_printer use composite" Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> [ported to stable 3.10 and 3.14] Signed-off-by:
-
Felipe Balbi authored
commit 84c0d178 upstream. Make sure we're using the new macro, so our resume signaling will always pass certification. Signed-off-by:
-
Christoph Hellwig authored
commit 579d69bc upstream. The 3w-sas driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by:
Torsten Luettgert <ml-lkml@enda.eu> Tested-by:
Bernd Kardatzki <Bernd.Kardatzki@med.uni-tuebingen.de> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Christoph Hellwig authored
commit 118c855b upstream. The 3w-9xxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by:
-
Christoph Hellwig authored
commit 9cd95546 upstream. The 3w-xxxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by:
-
Lukas Czerner authored
commit d2dc317d upstream. Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Ilya Dryomov authored
commit 082a75da upstream. When we end I/O struct request with error, we need to pass obj_request->length as @nr_bytes so that the entire obj_request worth of bytes is completed. Otherwise block layer ends up confused and we trip on rbd_assert(more ^ (which == img_request->obj_request_count)); in rbd_img_obj_callback() due to more being true no matter what. We already do it in most cases but we are missing some, in particular those where we don't even get a chance to submit any obj_requests, due to an early -ENOMEM for example. A number of obj_request->xferred assignments seem to be redundant but I haven't touched any of obj_request->xferred stuff to keep this small and isolated. Cc: Alex Elder <elder@linaro.org> Reported-by:
Shawn Edwards <lesser.evil@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Michal Simek authored
commit 6befa9d8 upstream. Do not probe all serial drivers by of_serial.c which are using device_type = "serial"; property. Only drivers which have valid compatible strings listed in the driver should be probed. When PORT_UNKNOWN is setup probe will fail anyway. Arnd quotation about driver historical background: "when I wrote that driver initially, the idea was that it would get used as a stub to hook up all other serial drivers but after that, the common code learned to create platform devices from DT" This patch fix the problem with on the system with xilinx_uartps and 16550a where of_serial failed to register for xilinx_uartps and because of irq_dispose_mapping() removed irq_desc. Then when xilinx_uartps was asking for irq with request_irq() EINVAL is returned. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
-
Takashi Iwai authored
commit ee52e56e upstream. The mute-LED mode control has the fixed on/off states that are supposed to remain on/off regardless of the master switch. However, this doesn't work actually because the vmaster hook is called in the vmaster code itself. This patch fixes it by calling the hook indirectly after checking the mute LED mode. Reported-and-tested-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
-
Peter Zubaj authored
commit 7241ea55 upstream. Looks like audigy emu10k2 (probably emu10k1 - sb live too) support two modes for DMA. Second mode is useful for 64 bit os with more then 2 GB of ram (fixes problems with big soundfont loading) 1) 32MB from 2 GB address space using 8192 pages (used now as default) 2) 16MB from 4 GB address space using 4096 pages Mode is set using HCFG_EXPANDED_MEM flag in HCFG register. Also format of emu10k2 page table is then different. Signed-off-by:
Peter Zubaj <pzubaj@marticonet.sk> Tested-by:
-
