The function uart_fifo_timeout() returns an unsigned long value, which
is the number of jiffies. Therefore, change the variable timeout in the
function uart_poll_timeout() from int to unsigned long.
Change the return type of the function uart_poll_timeout() from int to
unsigned long to be consistent with the type of timeout values.
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Link: https://lore.kernel.org/r/20231109063417.3971005-2-vamshigajjela@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MOXA PCIe RS422/RS485 boards will not function by default because of the
initial default serial interface of all MOXA PCIe boards is set to
RS232.

This patch fixes the problem above by setting the initial default serial
interface to RS422 for those MOXA RS422/RS485 PCIe boards.
Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@moxa.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231214060234.6147-1-crescentcy.hsieh@moxa.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On this platform, different vendor data is used. That requires a
compile-time check as we access (1) a global boolean & (2) our local
vendor data. Both symbols are accessible only when
CONFIG_ACPI_SPCR_TABLE is enabled.

Factor the vendor data overriding to a separate function that is empty
when CONFIG_ACPI_SPCR_TABLE is not defined.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-8-e384afa5e78c@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The whole function body is encapsulated inside an if-condition. Reverse
the if logic and early return to remove one indentation level.

Also turn two nested ifs into a single one at the end of the function.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-7-e384afa5e78c@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following messages from checkpatch:

    $ ./scripts/checkpatch.pl --strict --file \
        drivers/tty/serial/amba-pl011.c

    ERROR: do not initialise statics to false
    WARNING: Possible unnecessary 'out of memory' message
    WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
    WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then
             dev_info(dev, ... then pr_info(...  to
    CHECK: Prefer using the BIT macro
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-6-e384afa5e78c@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following checkpatch warnings & checks:

	$ ./scripts/checkpatch.pl --strict --file \
        drivers/tty/serial/amba-pl011.c

    CHECK: Unbalanced braces around else statement
    CHECK: Unnecessary parentheses around '[...]'
    CHECK: braces {} should be used on all arms of this statement
    CHECK: Comparison to NULL could be written "[...]"
    WARNING: Comparisons should place the constant on the right side of the test
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-5-e384afa5e78c@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove all instances of quoted strings split across lines. Fix four
checkpatch warnings:

    $ ./scripts/checkpatch.pl --strict --file \
        drivers/tty/serial/amba-pl011.c
    WARNING: quoted string split across lines
    [...]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-4-e384afa5e78c@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver uses two TIOCMBIT macros inside pl011_{get,set}_mctrl to
simplify the logic. Those look scary to checkpatch because they contain
ifs without do-while loops.

Avoid the macros by creating small equivalent static functions; that
lets the compiler do its type checking & avoids checkpatch errors.

For the second instance __assign_bit is not usable because it deals with
unsigned long pointers whereas we have an unsigned int in
pl011_set_mctrl.

This addresses the following checkpatch warnings:

    $ ./scripts/checkpatch.pl --strict --file \
        drivers/tty/serial/amba-pl011.c

    ERROR: Macros starting with if should be enclosed by a do -
           while loop to avoid possible if/else logic defects

    CHECK: Macro argument 'uartbit' may be better as '(uartbit)' to
           avoid precedence issues

    ERROR: Macros starting with if should be enclosed by a do - while
           loop to avoid possible if/else logic defects

    CHECK: Macro argument 'tiocmbit' may be better as '(tiocmbit)' to
           avoid precedence issues
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-3-e384afa5e78c@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Follow recommandations from:

    $ ./scripts/checkpatch.pl --strict --file \
        drivers/tty/serial/amba-pl011.c

We fix 5 warnings and 48 checks, all related to whitespace.
Culprits are:

CHECK: Alignment should match open parenthesis
CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Lines should not end with a '('
CHECK: Please don't use multiple blank lines
CHECK: Please use a blank line after function/struct/union/enum
       declarations
CHECK: spaces preferred around that '/' (ctx:VxV)
CHECK: spaces preferred around that '|' (ctx:VxV)
WARNING: Missing a blank line after declarations
WARNING: please, no spaces at the start of a line
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-2-e384afa5e78c@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver uses bit shifts and hexadecimal expressions to declare
constants. Replace that with the BIT(), GENMASK() & FIELD_PREP_CONST()
macros to clarify intent.

include/linux/amba/serial.h gets included from arch/arm/include/debug/pl01x.S.
Avoid includes and macro tricks for the four defines that are involved:
UART01x_DR, UART01x_FR, UART01x_FR_TXFF and UART01x_FR_BUSY.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-1-e384afa5e78c@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It can happen that while a break is received the transmitter gets empty
and IIR signals a Transmitter holding register empty (THRI) event. In
this case it's too early for the break workaround. Still doing it then
results in the THRI event not being rereported which makes the driver
miss that and e.g. for RS485 half-duplex communication it fails to
switch back to RX mode.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231213174312.2341013-1-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a spelling mistake in a pr_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231208102331.3267192-1-colin.i.king@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The UMS9620 also uses the same serial device with SC9836.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20231215085630.984892-4-chunyan.zhang@unisoc.comAcked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit cc4c1d05 ("sc16is7xx: Properly resume TX after stop") changed
behavior to unconditionnaly set the THRI interrupt in sc16is7xx_tx_proc().

For example when sending a 65 bytes message, and assuming the Tx FIFO is
initially empty, sc16is7xx_handle_tx() will write the first 64 bytes of the
message to the FIFO and sc16is7xx_tx_proc() will then activate THRI. When
the THRI IRQ is fired, the driver will write the remaining byte of the
message to the FIFO, and disable THRI by calling sc16is7xx_stop_tx().

When sending a 2 bytes message, sc16is7xx_handle_tx() will write the 2
bytes of the message to the FIFO and call sc16is7xx_stop_tx(), disabling
THRI. After sc16is7xx_handle_tx() exits, control returns to
sc16is7xx_tx_proc() which will unconditionally set THRI. When the THRI IRQ
is fired, the driver simply acknowledges the interrupt and does nothing
more, since all the data has already been written to the FIFO. This results
in 2 register writes and 4 register reads all for nothing and taking
precious cycles from the I2C/SPI bus.

Fix this by enabling the THRI interrupt only when we fill the Tx FIFO to
its maximum capacity and there are remaining bytes to send in the message.

Fixes: cc4c1d05 ("sc16is7xx: Properly resume TX after stop")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-7-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The SC16IS7XX IC supports a burst mode to access the FIFOs where the
initial register address is sent ($00), followed by all the FIFO data
without having to resend the register address each time. In this mode, the
IC doesn't increment the register address for each R/W byte.

The regmap_raw_read() and regmap_raw_write() are functions which can
perform IO over multiple registers. They are currently used to read/write
from/to the FIFO, and although they operate correctly in this burst mode on
the SPI bus, they would corrupt the regmap cache if it was not disabled
manually. The reason is that when the R/W size is more than 1 byte, these
functions assume that the register address is incremented and handle the
cache accordingly.

Convert FIFO R/W functions to use the regmap _noinc_ versions in order to
remove the manual cache control which was a workaround when using the
_raw_ versions. FIFO registers are properly declared as volatile so
cache will not be used/updated for FIFO accesses.

Fixes: dfeae619 ("serial: sc16is7xx")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-6-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the driver has been converted to use one regmap per port, change
efr locking to operate on a channel basis instead of on the whole IC.

Fixes: 3837a037 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc:  <stable@vger.kernel.org> # 6.1.x: 3837a037 serial: sc16is7xx: improve regmap debugfs by using one regmap per port
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-5-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the driver has been converted to use one regmap per port, the line
structure member is no longer used, so remove it.

Fixes: 3837a037 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-4-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove global struct regmap so that it is more obvious that this
regmap is to be used only in the probe function.

Also add a comment to that effect in probe function.

Fixes: 3837a037 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc:  <stable@vger.kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-3-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using a static buffer inside sc16is7xx_regmap_name() was a convenient and
simple way to set the regmap name without having to allocate and free a
buffer each time it is called. The drawback is that the static buffer
wastes memory for nothing once regmap is fully initialized.

Remove static buffer and use constant strings instead.

This also avoids a truncation warning when using "%d" or "%u" in snprintf
which was flagged by kernel test robot.

Fixes: 3837a037 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc:  <stable@vger.kernel.org> # 6.1.x: 3837a037 serial: sc16is7xx: improve regmap debugfs by using one regmap per port
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-2-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d20d3ac106bac6b7cabe39f22ad00ac86910e0a5.1702230342.git.christophe.jaillet@wanadoo.frSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The capability CAP_CHECKPOINT_RESTORE was introduced to allow non-root
users to checkpoint and restore processes as non-root with CRIU.

This change extends CAP_CHECKPOINT_RESTORE to enable the CRIU option
'--shell-job' as non-root. CRIU's man-page describes the '--shell-job'
option like this:

  Allow one to dump shell jobs. This implies the restored task will
  inherit session and process group ID from the criu itself. This option
  also allows to migrate a single external tty connection, to migrate
  applications like top.

TIOCSLCKTRMIOS can only be done if the process has CAP_SYS_ADMIN and
this change extends it to CAP_SYS_ADMIN or CAP_CHECKPOINT_RESTORE.

With this change it is possible to checkpoint and restore processes
which have a tty connection as non-root if CAP_CHECKPOINT_RESTORE is
set.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Adrian Reber <areber@redhat.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20231208143656.1019-1-areber@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.

Error checking for matching was not necessary as matching is always
successful if we're already in probe and the match tables always have data
pointers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231207162632.2650356-2-robh@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. Soon the implicit includes are going to be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231207162632.2650356-1-robh@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i.MX1 has three UART interrupts instead of a single one like other
i.MX devices.

Take this into account for properly describing the i.MX1 UART
interrupts.

This fixes the following dt-schema warning:

	from schema $id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml#yaml#

imx1-ads.dtb: serial@206000: interrupts: [[30], [29], [26]] is too long
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231206162841.2326201-1-festevam@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the serial fixes in here as well to build off of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull scheduler fix from Borislav Petkov:

 - Make sure tasks are thawed exactly and only once to avoid their state
   getting corrupted

* tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  freezer,sched: Do not restore saved_state of a thawed task

Pull perf event fix from Borislav Petkov:

 - Make sure perf event size validation is done on every event in the
   group

* tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_event_validate_size()

Pull x86 fixes from Borislav Petkov:

 - Add a forgotten CPU vendor check in the AMD microcode post-loading
   callback so that the callback runs only on AMD

 - Make sure SEV-ES protocol negotiation happens only once and on the
   BSP

* tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Check vendor in the AMD microcode callback
  x86/sev: Fix kernel crash due to late update to read-only ghcb_version

Pull kvm fixes from Paolo Bonzini:
 "Generic:

   - Set .owner for various KVM file_operations so that files refcount
     the KVM module until KVM is done executing _all_ code, including
     the last few instructions of kvm_put_kvm(). And then revert the
     misguided attempt to rely on "struct kvm" refcounts to pin
     KVM-the-module.

  ARM:

   - Do not redo the mapping of vLPIs, if they have already been mapped

  s390:

   - Do not leave bits behind in PTEs

   - Properly catch page invalidations that affect the prefix of a
     nested guest

  x86:

   - When checking if a _running_ vCPU is "in-kernel", i.e. running at
     CPL0, get the CPL directly instead of relying on
     preempted_in_kernel (which is valid if and only if the vCPU was
     preempted, i.e. NOT running).

   - Fix a benign "return void" that was recently introduced.

  Selftests:

   - Makefile tweak for dependency generation

   - '-Wformat' fix"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Update EFER software model on CR0 trap for SEV-ES
  KVM: selftests: add -MP to CFLAGS
  KVM: selftests: Actually print out magic token in NX hugepages skip message
  KVM: x86: Remove 'return void' expression for 'void function'
  Revert "KVM: Prevent module exit until all VMs are freed"
  KVM: Set file_operations.owner appropriately for all such structures
  KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode
  KVM: arm64: GICv4: Do not perform a map to a mapped vLPI
  KVM: s390/mm: Properly reset no-dat
  KVM: s390: vsie: fix wrong VIR 37 when MSO is used

Pull powerpc fix from Michael Ellerman:

 - Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU
   hotplug while ftrace is active.

   Thanks to Naveen N Rao.

* tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/ftrace: Fix stack teardown in ftrace_no_trace

Pull gpio fix from Bartosz Golaszewski:

 - fix an error path after a failed export in sysfs code

* tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: sysfs: Fix error handling on failed export

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 6.7-rc5 to resolve some reported
  issues. Included in here are:

   - usb gadget f_hid, and uevent fix

   - xhci driver revert to resolve a much-reported issue

   - typec driver fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: f_hid: fix report descriptor allocation
  Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"
  usb: typec: class: fix typec_altmode_put_partner to put plugs
  USB: gadget: core: adjust uevent timing on gadget unbind

Pull serial driver fixes from Greg KH:
 "Here are some small serial driver fixes for 6.7-rc4 to resolve some
  reported issues. Included in here are:

   - pl011 dma support fix

   - sc16is7xx driver fix

   - ma35d1 console index fix

   - 8250 driver fixes for small issues

  All of these have been in linux-next with no reported issues"

* tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART
  serial: ma35d1: Validate console index before assignment
  ARM: PL011: Fix DMA support
  serial: sc16is7xx: address RX timeout interrupt errata
  serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit
  serial: 8250_omap: Add earlycon support for the AM654 UART controller
  serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt

Pull char / misc driver fixes from Greg KH:
 "Here are some small fixes for 6.7-rc5 for a variety of small driver
  subsystems. Included in here are:

   - debugfs revert for reported issue

   - greybus revert for reported issue

   - greybus fixup for endian build warning

   - coresight driver fixes

   - nvmem driver fixes

   - devcoredump fix

   - parport new device id

   - ndtest build fix

  All of these have ben in linux-next with no reported issues"

* tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: Do not expect fixed layouts to grab a layout driver
  parport: Add support for Brainboxes IX/UC/PX parallel cards
  Revert "greybus: gb-beagleplay: Ensure le for values in transport"
  greybus: gb-beagleplay: Ensure le for values in transport
  greybus: BeaglePlay driver needs CRC_CCITT
  Revert "debugfs: annotate debugfs handlers vs. removal with lockdep"
  devcoredump: Send uevent once devcd is ready
  ndtest: fix typo class_regster -> class_register
  misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write
  misc: mei: client.c: return negative error code in mei_cl_write
  mei: pxp: fix mei_pxp_send_message return value
  coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base
  coresight: ultrasoc-smb: Config SMB buffer before register sink
  coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb
  Documentation: coresight: fix `make refcheckdocs` warning
  hwtracing: hisi_ptt: Don't try to attach a task
  hwtracing: hisi_ptt: Handle the interrupt in hardirq context
  hwtracing: hisi_ptt: Add dummy callback pmu::read()
  coresight: Fix crash when Perf and sysfs modes are used concurrently
  coresight: etm4x: Remove bogous __exit annotation for some functions

Merge tag 'loongarch-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Preserve syscall nr across execve(), slightly clean up drdtime(), fix
  the Clang built zboot kernel, fix a stack unwinder bug and several bpf
  jit bugs"

* tag 'loongarch-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: BPF: Fix unconditional bswap instructions
  LoongArch: BPF: Fix sign-extension mov instructions
  LoongArch: BPF: Don't sign extend function return value
  LoongArch: BPF: Don't sign extend memory load operand
  LoongArch: Preserve syscall nr across execve()
  LoongArch: Set unwind stack type to unknown rather than set error flag
  LoongArch: Slightly clean up drdtime()
  LoongArch: Apply dynamic relocations for LLD

Pull MIPS fixes from Thomas Bogendoerfer:

 - Fixes for broken Loongson firmware

 - Fix lockdep splat

 - Fix FPU states when creating kernel threads

* tag 'mips-fixes_6.7_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: kernel: Clear FPU states when setting up kernel threads
  MIPS: Loongson64: Handle more memory types passed from firmware
  MIPS: Loongson64: Enable DMA noncoherent support
  MIPS: Loongson64: Reserve vgabios memory on boot
  mips/smp: Call rcutree_report_cpu_starting() earlier

Merge tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "A random set of small bug fixes including:

   - Fix segfault on AmpereOne due to missing default metricgroup name

   - Fix segfault on `perf list --json` due to NULL pointer"

* tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback
  perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields
  perf metrics: Avoid segv if default metricgroup isn't set

Pull smb client fixes from Steve French:
 "Six smb3 client fixes:

   - Fixes for copy_file_range and clone (cache invalidation and file
     size), also addresses an xfstest failure

   - Fix to return proper error if REMAP_FILE_DEDUP set (also fixes
     xfstest generic/304)

   - Fix potential null pointer reference with DFS

   - Multichannel fix addressing (reverting an earlier patch) some of
     the problems with enabling/disabling channels dynamically

  Still working on a followon multichannel fix to address another issue
  found in reconnect testing that will send next week"

* tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: reconnect worker should take reference on server struct unconditionally
  Revert "cifs: reconnect work should have reference on server struct"
  cifs: Fix non-availability of dedup breaking generic/304
  smb: client: fix potential NULL deref in parse_dfs_referrals()
  cifs: Fix flushing, invalidation and file size with FICLONE
  cifs: Fix flushing, invalidation and file size with copy_file_range()

We can see that "bswap32: Takes an unsigned 32-bit number in either big-
or little-endian format and returns the equivalent number with the same
bit width but opposite endianness" in BPF Instruction Set Specification,
so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and
BPF_ALU64.

[root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable
[root@linux fedora]# modprobe test_bpf

Before:
test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times)
test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times)

After:
test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS
test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS

Fixes: 4ebf9216 ("LoongArch: BPF: Support unconditional bswap instructions")
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>