- 14 Jun, 2024 20 commits
-
-
Marek Vasut authored
Trivial, fix up the comments using 'Mhz' to 'MHz'. No functional change. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Christophe Roullier <christophe.roullier@foss.st.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Marek Vasut authored
Use dev_err()/dev_dbg() and phy_modes() to print PHY mode instead of pr_debug() and hand-written PHY mode decoding. This way, each debug print has associated device with it and duplicated mode decoding is removed. Signed-off-by:
-
Marek Vasut authored
Pull the PMCR clock mux configuration into a separate function. This is the final change of three, which moves external clock rate validation, external clock selector decoding, and clock mux configuration into separate functions. This should make the code easier to understand. No functional change intended. Signed-off-by:
-
Marek Vasut authored
Pull the external clock selector into a separate function, to avoid conflating it with external clock rate validation and clock mux register configuration. This should make the code easier to read and understand. The dwmac->enable_eth_ck variable in the end indicates whether the MAC clock are supplied by external oscillator (true) or internal RCC clock IP (false). The dwmac->enable_eth_ck value is set based on multiple DT properties, some of them deprecated, some of them specific to bus mode. The following DT properties and variables are taken into account. In each case, if the property is present or true, MAC clock is supplied by external oscillator. - "st,ext-phyclk", assigned to variable dwmac->ext_phyclk - Used in any mode (MII/RMII/GMII/RGMII) - The only non-deprecated DT property of the three - "st,eth-clk-sel", assigned to variable dwmac->eth_clk_sel_reg - Valid only in GMII/RGMII mode - Deprecated property, backward compatibility only - "st,eth-ref-clk-sel", assigned to variable dwmac->eth_ref_clk_sel_reg - Valid only in RMII mode - Deprecated property, backward compatibility only The stm32mp1_select_ethck_external() function handles the aforementioned DT properties and sets dwmac->enable_eth_ck accordingly. The stm32mp1_set_mode() is adjusted to call stm32mp1_select_ethck_external() first and then only use dwmac->enable_eth_ck to determine hardware clock mux settings. No functional change intended. Signed-off-by:
-
Marek Vasut authored
Pull the external clock frequency validation into a separate function, to avoid conflating it with external clock DT property decoding and clock mux register configuration. This should make the code easier to read and understand. This does change the code behavior slightly. The clock mux PMCR register setting now depends solely on the DT properties which configure the clock mux between external clock and internal RCC generated clock. The mux PMCR register settings no longer depend on the supplied clock frequency, that supplied clock frequency is now only validated, and if the clock frequency is invalid for a mode, it is rejected. Previously, the code would switch the PMCR register clock mux to internal RCC generated clock if external clock couldn't provide suitable frequency, without checking whether the RCC generated clock frequency is correct. Such behavior is risky at best, user should have configured their clock correctly in the first place, so this behavior is removed here. Signed-off-by:
-
Christophe Roullier authored
New STM32 SOC have 2 GMACs instances. GMAC IP version is SNPS 4.20. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Lukasz Majewski authored
This patch provides support for sending supervision HSR frames with MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled. Supervision frames with RedBox MAC address (appended as second TLV) are only send for ProxyNodeTable nodes. This patch series shall be tested with hsr_redbox.sh script. Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Martin Schiller says: ==================== net: dsa: lantiq_gswip: code improvements This patchset for the lantiq_gswip driver is a collection of minor fixes and coding improvements by Martin Blumenstingl without any real changes in the actual functionality. ==================== Link: https://lore.kernel.org/r/20240611135434.3180973-1-ms@dev.tdt.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Martin Blumenstingl authored
Print that no FID is found for bridge %s instead of the incorrect message that the port is not part of a bridge. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20240611135434.3180973-13-ms@dev.tdt.deSigned-off-by:
-
Martin Blumenstingl authored
Update the comments in gswip_port_vlan_filtering() so it's clear that there are two separate cases, one for "tag based VLAN" and another one for "port based VLAN". Suggested-by:
-
Martin Schiller authored
The port validation in gswip_add_single_port_br() is superfluous and can be omitted. Suggested-by:
-
Martin Blumenstingl authored
Only bits [5:0] in mac_bridge.key[3] are reserved for the FID. Also, for dynamic (learned) entries, bits [7:4] in mac_bridge.val[0] represents the port. Introduce new macros GSWIP_TABLE_MAC_BRIDGE_KEY3_FID and GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT macro and use it throughout the driver. Also rename and update GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC to use the BIT() macro. This makes the driver code easier to understand. Signed-off-by:
-
Martin Blumenstingl authored
The addr variable in gswip_port_fdb_dump() stores a mac address. Use ETH_ALEN to make this consistent across other drivers. Signed-off-by:
-
Martin Blumenstingl authored
Make the check for the CPU port in gswip_port_change_mtu() consistent with other areas of the driver by using dsa_is_cpu_port(). Signed-off-by:
-
Martin Schiller authored
Before commit 74be4bab ("net: dsa: do not enable or disable non user ports"), gswip_port_enable/disable() were also executed for the cpu port in gswip_setup() which disabled the cpu port during initialization. Let's restore this by removing the dsa_is_user_port checks. Also, let's clean up the gswip_port_enable() function so that we only have to check for the cpu port once. The operation reordering done here is safe. Signed-off-by:
-
Martin Blumenstingl authored
We don't need to manually call gswip_port_enable() from within gswip_setup() for the CPU port. DSA does this automatically for us. Signed-off-by:
-
Martin Blumenstingl authored
dev_err_probe() can be used to simplify the existing code. Also it means we get rid of the following warning which is seen whenever the PMAC (Ethernet controller which connects to GSWIP's CPU port) has not been probed yet: gswip 1e108000.switch: dsa switch register failed: -517 Signed-off-by:
-
Martin Schiller authored
Some dev_err are missing the terminating \n. Let's add that. Suggested-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Martin Blumenstingl authored
Add the CPU port to gswip_xrx200_phylink_get_caps() and gswip_xrx300_phylink_get_caps(). It connects through a SoC-internal bus, so the only allowed phy-mode is PHY_INTERFACE_MODE_INTERNAL. Signed-off-by:
-
Martin Schiller authored
Convert the lantiq,gswip bindings to YAML format. Also add this new file to the MAINTAINERS file. Furthermore, the CPU port has to specify a phy-mode and either a phy or a fixed-link. Since GSWIP is connected using a SoC internal protocol there's no PHY involved. Add phy-mode = "internal" and a fixed-link to the example code to describe the communication between the PMAC (Ethernet controller) and GSWIP switch. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Reviewed-by:
-
- 13 Jun, 2024 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaJakub Kicinski authored
Leon Romanovsky says: ==================== net: mana: Allow variable size indirection table Like we talked, I created new shared branch for this patch: https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/log/?h=mana-shared * 'mana-shared' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: net: mana: Allow variable size indirection table ==================== Link: https://lore.kernel.org/all/20240612183051.GE4966@unrealSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts, no adjacent changes. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and netfilter. Slim pickings this time, probably a combination of summer, DevConf.cz, and the end of first half of the year at corporations. Current release - regressions: - Revert "igc: fix a log entry using uninitialized netdev", it traded lack of netdev name in a printk() for a crash Previous releases - regressions: - Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ - geneve: fix incorrectly setting lengths of inner headers in the skb, confusing the drivers and causing mangled packets - sched: initialize noop_qdisc owner to avoid false-positive recursion detection (recursing on CPU 0), which bubbles up to user space as a sendmsg() error, while noop_qdisc should silently drop - netdevsim: fix backwards compatibility in nsim_get_iflink() Previous releases - always broken: - netfilter: ipset: fix race between namespace cleanup and gc in the list:set type" * tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send() af_unix: Read with MSG_PEEK loops if the first unread byte is OOB bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response gve: Clear napi->skb before dev_kfree_skb_any() ionic: fix use after netif_napi_del() Revert "igc: fix a log entry using uninitialized netdev" net: bridge: mst: fix suspicious rcu usage in br_mst_set_state net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state net/ipv6: Fix the RT cache flush via sysctl using a previous delay net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters gve: ignore nonrelevant GSO type bits when processing TSO headers net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP netfilter: Use flowlabel flow key when re-routing mangled packets netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type netfilter: nft_inner: validate mandatory meta and payload tcp: use signed arithmetic in tcp_rtx_probe0_timed_out() mailmap: map Geliang's new email address mptcp: pm: update add_addr counters after connect mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID mptcp: ensure snd_una is properly initialized on connect ... -
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: "Bugfixes: - NFSv4.2: Fix a memory leak in nfs4_set_security_label - NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long. - NFS: Add appropriate memory barriers to the sillyrename code - Propagate readlink errors in nfs_symlink_filler - NFS: don't invalidate dentries on transient errors - NFS: fix unnecessary synchronous writes in random write workloads - NFSv4.1: enforce rootpath check when deciding whether or not to trunk Other: - Change email address for Trond Myklebust due to email server concerns" * tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: add barriers when testing for NFS_FSDATA_BLOCKED SUNRPC: return proper error from gss_wrap_req_priv NFSv4.1 enforce rootpath check in fs_location query NFS: abort nfs_atomic_open_v23 if name is too long. nfs: don't invalidate dentries on transient errors nfs: Avoid flushing many pages with NFS_FILE_SYNC nfs: propagate readlink errors in nfs_symlink_filler MAINTAINERS: Change email address for Trond Myklebust NFSv4: Fix memory leak in nfs4_set_security_label
-
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblockLinus Torvalds authored
Pull memblock fixes from Mike Rapoport: "Fix validation of NUMA coverage. memblock_validate_numa_coverage() was checking for a unset node ID using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was specified by buggy firmware. Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()" * tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node() memblock: make memblock_set_node() also warn about use of MAX_NUMNODES
-
Aleksandr Mishin authored
In case of token is released due to token->state == BNXT_HWRM_DEFERRED, released token (set to NULL) is used in log messages. This issue is expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But this error code is returned by recent firmware. So some firmware may not return it. This may lead to NULL pointer dereference. Adjust this issue by adding token pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8fa4219d ("bnxt_en: add dynamic debug support for HWRM messages") Suggested-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by:
-
Rao Shoaib authored
Read with MSG_PEEK flag loops if the first byte to read is an OOB byte. commit 22dd70eb ("af_unix: Don't peek OOB data without MSG_OOB.") addresses the loop issue but does not address the issue that no data beyond OOB byte can be read. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'a', MSG_OOB) 1 >>> c1.send(b'b') 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'b' >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c2.setsockopt(SOL_SOCKET, SO_OOBINLINE, 1) >>> c1.send(b'a', MSG_OOB) 1 >>> c1.send(b'b') 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_DONTWAIT) b'a' >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'b' >>> Fixes: 314001f0 ("af_unix: Add OOB support") Signed-off-by:
Rao Shoaib <Rao.Shoaib@oracle.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240611084639.2248934-1-Rao.Shoaib@oracle.comSigned-off-by:
-
Michael Chan authored
Firmware interface 1.10.2.118 has increased the size of HWRM_PORT_PHY_QCFG response beyond the maximum size that can be forwarded. When the VF's link state is not the default auto state, the PF will need to forward the response back to the VF to indicate the forced state. This regression may cause the VF to fail to initialize. Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum 96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the new speeds2 fields are beyond the legacy structure. Also modify bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96 bytes to make this failure more obvious. Fixes: 84a911db ("bnxt_en: Update firmware interface to 1.10.2.118") Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Ziwei Xiao authored
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it is freed with dev_kfree_skb_any(). This can result in a subsequent call to napi_get_frags returning a dangling pointer. Fix this by clearing napi->skb before the skb is freed. Fixes: 9b8dd5e5 ("gve: DQO: Add RX path") Cc: stable@vger.kernel.org Reported-by:
Shailend Chand <shailend@google.com> Signed-off-by:
Ziwei Xiao <ziweixiao@google.com> Reviewed-by:
Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by:
Praveen Kaligineedi <pkaligineedi@google.com> Link: https://lore.kernel.org/r/20240612001654.923887-1-ziweixiao@google.comSigned-off-by:
-
Taehee Yoo authored
When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240612060446.1754392-1-ap420073@gmail.comSigned-off-by:
-
Sasha Neftin authored
This reverts commit 86167183. igc_ptp_init() needs to be called before igc_reset(), otherwise kernel crash could be observed. Following the corresponding discussion [1] and [2] revert this commit. Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1] Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2] Fixes: 86167183 ("igc: fix a log entry using uninitialized netdev") Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Ole André Vadla Ravnås authored
Available on iOS/iPadOS >= 17, where this new interface is used by developer tools using the new RemoteXPC protocol. This private interface lacks a status endpoint, presumably because there isn't a physical cable that can be unplugged, nor any speed changes to be notified about. Note that NCM interfaces are not exposed until a mode switch is requested, which macOS does automatically. The mode switch can be performed like this: uint8_t status; libusb_control_transfer(device_handle, LIBUSB_RECIPIENT_DEVICE | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN, 82, /* bRequest */ 0, /* wValue */ 3, /* wIndex */ &status, sizeof(status), 0); Newer versions of usbmuxd do this automatically. Co-developed-by:Håvard Sørbø <havard@hsorbo.no> Signed-off-by:
Ole André Vadla Ravnås <oleavr@frida.re> Link: https://lore.kernel.org/r/20240607074117.31322-1-oleavr@frida.reSigned-off-by:
-
Jakub Kicinski authored
Nikolay Aleksandrov says: ==================== net: bridge: mst: fix suspicious rcu usage warning This set fixes a suspicious RCU usage warning triggered by syzbot[1] in the bridge's MST code. After I converted br_mst_set_state to RCU, I forgot to update the vlan group dereference helper. Fix it by using the proper helper, in order to do that we need to pass the vlan group which is already obtained correctly by the callers for their respective context. Patch 01 is a requirement for the fix in patch 02. Note I did consider rcu_dereference_rtnl() but the churn is much bigger and in every part of the bridge. We can do that as a cleanup in net-next. [1] https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe ============================= WARNING: suspicious RCU usage 6.10.0-rc2-syzkaller-00235-g8a929806 #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.1/5374: #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: mmap_read_lock include/linux/mmap_lock.h:144 [inline] #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: __mm_populate+0x1b0/0x460 mm/gup.c:2111 #1: ffffc90000a18c00 ((&p->forward_delay_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x650 kernel/time/timer.c:1789 #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86 #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: br_mst_set_state+0x171/0x7a0 net/bridge/br_mst.c:105 stack backtrace: CPU: 1 PID: 5374 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00235-g8a929806 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x29e/0x7a0 net/bridge/br_mst.c:106 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers kernel/time/timer.c:2417 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428 run_timer_base kernel/time/timer.c:2437 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> ==================== Link: https://lore.kernel.org/r/20240609103654.914987-1-razor@blackwall.orgSigned-off-by:
-
Nikolay Aleksandrov authored
I converted br_mst_set_state to RCU to avoid a vlan use-after-free but forgot to change the vlan group dereference helper. Switch to vlan group RCU deref helper to fix the suspicious rcu usage warning. Fixes: 3a7c1661 ("net: bridge: mst: fix vlan use-after-free") Reported-by: syzbot+9bbe2de1bc9d470eb5fe@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5feSigned-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240609103654.914987-3-razor@blackwall.orgSigned-off-by:
-
Nikolay Aleksandrov authored
Pass the already obtained vlan group pointer to br_mst_vlan_set_state() instead of dereferencing it again. Each caller has already correctly dereferenced it for their context. This change is required for the following suspicious RCU dereference fix. No functional changes intended. Fixes: 3a7c1661 ("net: bridge: mst: fix vlan use-after-free") Reported-by: syzbot+9bbe2de1bc9d470eb5fe@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5feSigned-off-by:
-
Jakub Kicinski authored
Asbjørn Sloth Tønnesen says: ==================== net: flower: validate encapsulation control flags Now that all drivers properly rejects unsupported flower control flags used with FLOW_DISSECTOR_KEY_CONTROL, then time has come to add similar checks to the drivers supporting FLOW_DISSECTOR_KEY_ENC_CONTROL. There are currently just 4 drivers supporting this key, and 3 of those currently doesn't validate encapsulated control flags. Encapsulation control flags may currently be unused, but they should still be validated by the drivers, so that drivers will properly reject any new flags when they are introduced. This series adds some helper functions, and implements them in all 4 drivers. NB: It is currently discussed[1] to use encapsulation control flags for tunnel flags instead of the new FLOW_DISSECTOR_KEY_ENC_FLAGS. [1] https://lore.kernel.org/netdev/ZmFuxElwZiYJzBkh@dcaratti.users.ipa.redhat.com/ ==================== Link: https://lore.kernel.org/r/20240609173358.193178-1-ast@fiberby.netSigned-off-by:
-
Asbjørn Sloth Tønnesen authored
Encapsulation control flags are currently not used anywhere, so all flags are currently unsupported by all drivers. This patch adds validation of this assumption, so that encapsulation flags may be used in the future. In case any encapsulation control flags are masked, flow_rule_match_has_enc_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile tested. Signed-off-by:
Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/20240609173358.193178-6-ast@fiberby.netSigned-off-by:
-
Asbjørn Sloth Tønnesen authored
Encapsulation control flags are currently not used anywhere, so all flags are currently unsupported by all drivers. This patch adds validation of this assumption, so that encapsulation flags may be used in the future. In case any encapsulation control flags are masked, flow_rule_match_has_enc_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile tested. Signed-off-by:
Louis Peens <louis.peens@corigine.com> Reviewed-by:
-
Asbjørn Sloth Tønnesen authored
Encapsulation control flags are currently not used anywhere, so all flags are currently unsupported by all drivers. This patch adds validation of this assumption, so that encapsulation flags may be used in the future. In case any encapsulation control flags are masked, flow_rule_match_has_enc_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Change the existing check for unsupported encapsulation control flags, to use the new helper flow_rule_is_supp_enc_control_flags(). No functional change, only compile tested. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
-
