- 05 Sep, 2018 2 commits
-
-
Eyal Birger authored
[ Upstream commit d6990976 ] When setting the skb->dst before doing the MTU check, the route PMTU caching and reporting is done on the new dst which is about to be released. Instead, PMTU handling should be done using the original dst. This is aligned with IPv4 VTI. Fixes: ccd740cb ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by:
Eyal Birger <eyal.birger@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paulo Flabiano Smorigo authored
commit e666d4e9 upstream. Signed-off-by:
Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 24 Aug, 2018 38 commits
-
-
Greg Kroah-Hartman authored
-
Jann Horn authored
commit a13f085d upstream. This fixes the following issues: - When a buffer size is supplied to reiserfs_listxattr() such that each individual name fits, but the concatenation of all names doesn't fit, reiserfs_listxattr() overflows the supplied buffer. This leads to a kernel heap overflow (verified using KASAN) followed by an out-of-bounds usercopy and is therefore a security bug. - When a buffer size is supplied to reiserfs_listxattr() such that a name doesn't fit, -ERANGE should be returned. But reiserfs instead just truncates the list of names; I have verified that if the only xattr on a file has a longer name than the supplied buffer length, listxattr() incorrectly returns zero. With my patch applied, -ERANGE is returned in both cases and the memory corruption doesn't happen anymore. Credit for making me clean this code up a bit goes to Al Viro, who pointed out that the ->actor calling convention is suboptimal and should be changed. Link: http://lkml.kernel.org/r/20180802151539.5373-1-jannh@google.com Fixes: 48b32a35 ("reiserfs: use generic xattr handlers") Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Jeff Mahoney <jeffm@suse.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Esben Haabendal authored
commit bed4ff1e upstream. This fixes a race condition, where the DMAEN bit ends up being set after I2C slave has transmitted a byte following the dummy read. When that happens, an interrupt is generated instead, and no DMA request is generated to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec). Fixed by setting the DMAEN bit before the dummy read. Signed-off-by:
Esben Haabendal <eha@deif.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Hans de Goede authored
commit c463a158 upstream. acpi_gsb_i2c_write_bytes() returns i2c_transfer()'s return value, which is the number of transfers executed on success, so 1. The ACPI code expects us to store 0 in gsb->status for success, not 1. Specifically this breaks the following code in the Thinkpad 8 DSDT: ECWR = I2CW = ECWR /* \_SB_.I2C1.BAT0.ECWR */ If ((ECST == Zero)) { ECRD = I2CR /* \_SB_.I2C1.I2CR */ } Before this commit we set ECST to 1, causing the read to never happen breaking battery monitoring on the Thinkpad 8. This commit makes acpi_gsb_i2c_write_bytes() return 0 when i2c_transfer() returns 1, so the single write transfer completed successfully, and makes it return -EIO on for other (unexpected) return values >= 0. Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Lukas Wunner authored
commit 1204e35b upstream. Commit b440bde7 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device") iterates over the devices on a hotplug port's subordinate bus in pciehp's IRQ handler without acquiring pci_bus_sem. It is thus possible for a user to cause a crash by concurrently manipulating the device list, e.g. by disabling slot power via sysfs on a different CPU or by initiating a remove/rescan via sysfs. This can't be fixed by acquiring pci_bus_sem because it may sleep. The simplest fix is to avoid the list iteration altogether and just check the ignore_hotplug flag on the port itself. This works because pci_ignore_hotplug() sets the flag both on the device as well as on its parent bridge. We do lose the ability to print the name of the device blocking hotplug in the debug message, but that's probably bearable. Fixes: b440bde7 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Lukas Wunner authored
commit 281e878e upstream. When pciehp is unbound (e.g. on unplug of a Thunderbolt device), the hotplug_slot struct is deregistered and thus freed before freeing the IRQ. The IRQ handler and the work items it schedules print the slot name referenced from the freed structure in various informational and debug log messages, each time resulting in a quadruple dereference of freed pointers (hotplug_slot -> pci_slot -> kobject -> name). At best the slot name is logged as "(null)", at worst kernel memory is exposed in logs or the driver crashes: pciehp 0000:10:00.0:pcie204: Slot((null)): Card not present An attacker may provoke the bug by unplugging multiple devices on a Thunderbolt daisy chain at once. Unplugging can also be simulated by powering down slots via sysfs. The bug is particularly easy to trigger in poll mode. It has been present since the driver's introduction in 2004: https://git.kernel.org/tglx/history/c/c16b4b14d980 Fix by rearranging teardown such that the IRQ is freed first. Run the work items queued by the IRQ handler to completion before freeing the hotplug_slot struct by draining the work queue from the ->release_slot callback which is invoked by pci_hp_deregister(). Signed-off-by:
-
Myron Stowe authored
commit 3dbe97ef upstream. PCIe r4.0, sec 9.3.5.4, "Device Control Register", shows both Max_Payload_Size (MPS) and Max_Read_request_Size (MRRS) to be 'RsvdP' for VFs. Just prior to the table it states: "PF and VF functionality is defined in Section 7.5.3.4 except where noted in Table 9-16. For VF fields marked 'RsvdP', the PF setting applies to the VF." All of which implies that with respect to Max_Payload_Size Supported (MPSS), MPS, and MRRS values, we should not be paying any attention to the VF's fields, but rather only to the PF's. Only looking at the PF's fields also logically makes sense as it's the sole physical interface to the PCIe bus. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527 Fixes: 27d868b5 ("PCI: Set MPS to match upstream bridge") Signed-off-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
-
Lukas Wunner authored
commit 4ce64358 upstream. If addition of sysfs files fails on registration of a hotplug slot, the struct pci_slot as well as the entry in the slot_list is leaked. The issue has been present since the hotplug core was introduced in 2002: https://git.kernel.org/tglx/history/c/a8a2069f432c Perhaps the idea was that even though sysfs addition fails, the slot should still be usable. But that's not how drivers use the interface, they abort probe if a non-zero value is returned. Signed-off-by:
-
John David Anglin authored
commit 3b885ac1 upstream. Now that mb() is an instruction barrier, it will slow performance if we issue unnecessary barriers. The spinlock defines have a number of unnecessary barriers. The __ldcw() define is both a hardware and compiler barrier. The mb() barriers in the routines using __ldcw() serve no purpose. The only barrier needed is the one in arch_spin_unlock(). We need to ensure all accesses are complete prior to releasing the lock. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Ursula Braun authored
commit caa21e19 upstream. Invoking shutdown for a socket in state SMC_LISTEN does not make sense. Nevertheless programs like syzbot fuzzing the kernel may try to do this. For SMC this means a socket refcounting problem. This patch makes sure a shutdown call for an SMC socket in state SMC_LISTEN simply returns with -ENOTCONN. Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Willem de Bruijn authored
commit 4576cd46 upstream. TPACKET_V3 stores variable length frames in fixed length blocks. Blocks must be able to store a block header, optional private space and at least one minimum sized frame. Frames, even for a zero snaplen packet, store metadata headers and optional reserved space. In the block size bounds check, ensure that the frame of the chosen configuration fits. This includes sockaddr_ll and optional tp_reserve. Syzbot was able to construct a ring with insuffient room for the sockaddr_ll in the header of a zero-length frame, triggering an out-of-bounds write in dev_parse_header. Convert the comparison to less than, as zero is a valid snap len. This matches the test for minimum tp_frame_size immediately below. Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Fixes: eb73190f ("net/packet: refine check for priv area size") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Florian Westphal authored
commit 6613b617 upstream. When first DCCP packet is SYNC or SYNCACK, we insert a new conntrack that has an un-initialized timeout value, i.e. such entry could be reaped at any time. Mark them as INVALID and only ignore SYNC/SYNCACK when connection had an old state. Reported-by: syzbot+6f18401420df260e37ed@syzkaller.appspotmail.com Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Eric Dumazet authored
commit 45c180bc upstream. struct xfrm_userpolicy_type has two holes, so we should not use C99 style initializer. KMSAN report: BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:140 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571 CPU: 1 PID: 4520 Comm: syz-executor841 Not tainted 4.17.0+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1117 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1211 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253 copyout lib/iov_iter.c:140 [inline] _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571 copy_to_iter include/linux/uio.h:106 [inline] skb_copy_datagram_iter+0x422/0xfa0 net/core/datagram.c:431 skb_copy_datagram_msg include/linux/skbuff.h:3268 [inline] netlink_recvmsg+0x6f1/0x1900 net/netlink/af_netlink.c:1959 sock_recvmsg_nosec net/socket.c:802 [inline] sock_recvmsg+0x1d6/0x230 net/socket.c:809 ___sys_recvmsg+0x3fe/0x810 net/socket.c:2279 __sys_recvmmsg+0x58e/0xe30 net/socket.c:2391 do_sys_recvmmsg+0x2a6/0x3e0 net/socket.c:2472 __do_sys_recvmmsg net/socket.c:2485 [inline] __se_sys_recvmmsg net/socket.c:2481 [inline] __x64_sys_recvmmsg+0x15d/0x1c0 net/socket.c:2481 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x446ce9 RSP: 002b:00007fc307918db8 EFLAGS: 00000293 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006dbc24 RCX: 0000000000446ce9 RDX: 000000000000000a RSI: 0000000020005040 RDI: 0000000000000003 RBP: 00000000006dbc20 R08: 0000000020004e40 R09: 0000000000000000 R10: 0000000040000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007ffc8d2df32f R14: 00007fc3079199c0 R15: 0000000000000001 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_save_stack mm/kmsan/kmsan.c:294 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685 kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527 __msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:413 __nla_put lib/nlattr.c:569 [inline] nla_put+0x276/0x340 lib/nlattr.c:627 copy_to_user_policy_type net/xfrm/xfrm_user.c:1678 [inline] dump_one_policy+0xbe1/0x1090 net/xfrm/xfrm_user.c:1708 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013 xfrm_dump_policy+0x1c0/0x2a0 net/xfrm/xfrm_user.c:1749 netlink_dump+0x9b5/0x1550 net/netlink/af_netlink.c:2226 __netlink_dump_start+0x1131/0x1270 net/netlink/af_netlink.c:2323 netlink_dump_start include/linux/netlink.h:214 [inline] xfrm_user_rcv_msg+0x8a3/0x9b0 net/xfrm/xfrm_user.c:2577 netlink_rcv_skb+0x37e/0x600 net/netlink/af_netlink.c:2448 xfrm_netlink_rcv+0xb2/0xf0 net/xfrm/xfrm_user.c:2598 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1680/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Local variable description: ----upt.i@dump_one_policy Variable was created at: dump_one_policy+0x78/0x1090 net/xfrm/xfrm_user.c:1689 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013 Byte 130 of 137 is uninitialized Memory access starts at ffff88019550407f Fixes: c0144bea ("[XFRM] netlink: Use nla_put()/NLA_PUT() variantes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
-
John David Anglin authored
commit 7797167f upstream. Now that we use a sync prior to releasing the locks in syscall.S, we don't need the PA 2.0 ordered stores used to release some locks. Using an ordered store, potentially slows the release and subsequent code. There are a number of other ordered stores and loads that serve no purpose. I have converted these to normal stores. Signed-off-by:
-
Jaegeuk Kim authored
commit 8a29c126 upstream. This patch enhances sanity check for SIT entries. syzbot hit the following crash on upstream commit 83beed7b (Fri Apr 20 17:56:32 2018 +0000) Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal syzbot dashboard link: https://syzkaller.appspot.com/bug?extid=bf9253040425feb155ad syzkaller reproducer: https://syzkaller.appspot.com/x/repro.syz?id=5692130282438656 Raw console output: https://syzkaller.appspot.com/x/log.txt?id=5095924598571008 Kernel config: https://syzkaller.appspot.com/x/.config?id=1808800213120130118 compiler: gcc (GCC) 8.0.1 20180413 (experimental) IMPORTANT: if you fix the bug, please add the following tag to the commit: Reported-by: syzbot+bf9253040425feb155ad@syzkaller.appspotmail.com It will help syzbot understand when the bug is fixed. See footer for details. If you forward the report, please keep this part and the footer. F2FS-fs (loop0): invalid crc value F2FS-fs (loop0): Try to recover 1th superblock, ret: 0 F2FS-fs (loop0): Mounted with checkpoint version = d F2FS-fs (loop0): Bitmap was wrongly cleared, blk:9740 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:1884! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4508 Comm: syz-executor0 Not tainted 4.17.0-rc1+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:update_sit_entry+0x1215/0x1590 fs/f2fs/segment.c:1882 RSP: 0018:ffff8801af526708 EFLAGS: 00010282 RAX: ffffed0035ea4cc0 RBX: ffff8801ad454f90 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff82eeb87e RDI: ffffed0035ea4cb6 RBP: ffff8801af526760 R08: ffff8801ad4a2480 R09: ffffed003b5e4f90 R10: ffffed003b5e4f90 R11: ffff8801daf27c87 R12: ffff8801adb8d380 R13: 0000000000000001 R14: 0000000000000008 R15: 00000000ffffffff FS: 00000000014af940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f06bc223000 CR3: 00000001adb02000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: allocate_data_block+0x66f/0x2050 fs/f2fs/segment.c:2663 do_write_page+0x105/0x1b0 fs/f2fs/segment.c:2727 write_node_page+0x129/0x350 fs/f2fs/segment.c:2770 __write_node_page+0x7da/0x1370 fs/f2fs/node.c:1398 sync_node_pages+0x18cf/0x1eb0 fs/f2fs/node.c:1652 block_operations+0x429/0xa60 fs/f2fs/checkpoint.c:1088 write_checkpoint+0x3ba/0x5380 fs/f2fs/checkpoint.c:1405 f2fs_sync_fs+0x2fb/0x6a0 fs/f2fs/super.c:1077 __sync_filesystem fs/sync.c:39 [inline] sync_filesystem+0x265/0x310 fs/sync.c:67 generic_shutdown_super+0xd7/0x520 fs/super.c:429 kill_block_super+0xa4/0x100 fs/super.c:1191 kill_f2fs_super+0x9f/0xd0 fs/f2fs/super.c:3030 deactivate_locked_super+0x97/0x100 fs/super.c:316 deactivate_super+0x188/0x1b0 fs/super.c:347 cleanup_mnt+0xbf/0x160 fs/namespace.c:1174 __cleanup_mnt+0x16/0x20 fs/namespace.c:1181 task_work_run+0x1e4/0x290 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:191 [inline] exit_to_usermode_loop+0x2bd/0x310 arch/x86/entry/common.c:166 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457d97 RSP: 002b:00007ffd46f9c8e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000457d97 RDX: 00000000014b09a3 RSI: 0000000000000002 RDI: 00007ffd46f9da50 RBP: 00007ffd46f9da50 R08: 0000000000000000 R09: 0000000000000009 R10: 0000000000000005 R11: 0000000000000246 R12: 00000000014b0940 R13: 0000000000000000 R14: 0000000000000002 R15: 000000000000658e RIP: update_sit_entry+0x1215/0x1590 fs/f2fs/segment.c:1882 RSP: ffff8801af526708 ---[ end trace f498328bb02610a2 ]--- Reported-and-tested-by: syzbot+bf9253040425feb155ad@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+7d6d31d3bc702f566ce3@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+0a725420475916460f12@syzkaller.appspotmail.com Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Jaegeuk Kim authored
commit c39a1b34 upstream. Let's avoid BUG_ON during fill_super, when on-disk was totall corrupted. Reviewed-by:
-
Paolo Bonzini authored
commit 9432a317 upstream. A comment warning against this bug is there, but the code is not doing what the comment says. Therefore it is possible that an EPOLLHUP races against irq_bypass_register_consumer. The EPOLLHUP handler schedules irqfd_shutdown, and if that runs soon enough, you get a use-after-free. Reported-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Roland Dreier authored
[ Upstream commit 9b382768 ] The old code in nvme_user_cmd() passed the userspace virtual address from nvme_passthru_cmd.metadata as the length of the metadata buffer as well as the address to nvme_submit_user_cmd(). Fixes: 63263d60 ("nvme: Use metadata for passthrough commands") Signed-off-by:
Roland Dreier <roland@purestorage.com> Reviewed-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit e01a06c8 ] The Marvell switches report their interrupts in a level sensitive way. When using edge sensitive detection a race condition in the interrupt handler of the swich might result in the OS to miss all future events which might make the switch non-functional. The problem is that both mv88e6xxx_g2_irq_thread_fn() and mv88e6xxx_g1_irq_thread_work() sample the irq cause register (MV88E6XXX_G2_INT_SRC and MV88E6XXX_G1_STS respectively) once and then handle the observed sources. If after sampling but before all observed irq sources are handled a new irq source gets active this is not noticed by the handler which returns unsuspecting, but the interrupt line stays active which prevents the edge detector to kick in. All device trees but imx6qdl-zii-rdu2 get this right (most of them by not specifying an interrupt parent). So fix imx6qdl-zii-rdu2 accordingly. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Robin H. Johnson authored
[ Upstream commit 2c4d6baf ] The ec_no_wakeup matcher added for Thinkpad X1 Carbon 6th gen systems beyond matched only a single DMI model (20KGS3JF01), that didn't cover my laptop (20KH002JUS). Change to match based on DMI product family to cover all X1 6th gen systems. Signed-off-by:
Robin H. Johnson <robbat2@gentoo.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Anson Huang authored
[ Upstream commit de2d9b52 ] GPC registers are NOT continuous, some registers are reserved and accessing them from userspace will trigger external abort, add regmap register access table to avoid below abort: root@imx6slevk:~# cat /sys/kernel/debug/regmap/20dc000.gpc/registers [ 108.480477] Unhandled fault: imprecise external abort (0x1406) at 0xb6db5004 [ 108.487985] pgd = 42b54bfd [ 108.490741] [b6db5004] *pgd=ba1b7831 [ 108.494386] Internal error: : 1406 [#1] SMP ARM [ 108.498943] Modules linked in: [ 108.502043] CPU: 0 PID: 389 Comm: cat Not tainted 4.18.0-rc1-00074-gc9f1f60-dirty #482 [ 108.509982] Hardware name: Freescale i.MX6 SoloLite (Device Tree) [ 108.516123] PC is at regmap_mmio_read32le+0x20/0x24 [ 108.521031] LR is at regmap_mmio_read+0x40/0x60 [ 108.525586] pc : [<c059cf74>] lr : [<c059d1ac>] psr: 20060093 [ 108.531875] sp : eccf1d98 ip : eccf1da8 fp : eccf1da4 [ 108.537122] r10: ec2d3800 r9 : eccf1f60 r8 : ecfc0000 [ 108.542370] r7 : eccf1e2c r6 : eccf1e2c r5 : 00000028 r4 : ec338e00 [ 108.548920] r3 : 00000000 r2 : eccf1e2c r1 : f0980028 r0 : 00000000 [ 108.555474] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 108.562720] Control: 10c5387d Table: acf4004a DAC: 00000051 [ 108.568491] Process cat (pid: 389, stack limit = 0xd4318a65) [ 108.574174] Stack: (0xeccf1d98 to 0xeccf2000) Fixes: 721cabf6 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit e56b8ce3 ] Attempt to make cryptic TCP seq number error messages clearer by (1) identifying the source of the message as "TCP", (2) identifying the errors as "seq # bug", and (3) grouping the field identifiers and values by separating them with commas. E.g., the following message is changed from: recvmsg bug 2: copied 73BCB6CD seq 70F17CBE rcvnxt 73BCB9AA fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:1881 tcp_recvmsg+0x649/0xb90 to: TCP recvmsg seq # bug 2: copied 73BCB6CD, seq 70F17CBE, rcvnxt 73BCB9AA, fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:2011 tcp_recvmsg+0x694/0xba0 Suggested-by:
積丹尼 Dan Jacobson <jidanni@jidanni.org> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 50973993 ] In cases the probing fails the log level of the messages should be an error. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 711c62df ] In case the SPI thread is not running, a simple reset of sync state won't fix the transmit timeout. We also need to wake up the kernel thread. Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit b2bab426 ] As long as the synchronization with the QCA7000 isn't finished, we cannot accept packets from the upper layers. So let the SPI thread enable the TX queue after sync and avoid unwanted packet drop. Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit 0018b265 ] When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The Versatile PCI controller driver has the same issue. Replace pci_remap_iospace() with the devm_ managed version to fix the bug. Fixes: b7e78170 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sergei Shtylyov authored
commit a5fb9fb0 upstream. When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. Introduce the devm_pci_remap_iospace() managed API and replace the pci_remap_iospace() call with it to fix the bug. Fixes: dbf9826d ("PCI: generic: Convert to DT resource parsing API") Signed-off-by:
-
Peng Hao authored
[ Upstream commit e10f7805 ] Inside a nested guest, access to hardware can be slow enough that tsc_read_refs always return ULLONG_MAX, causing tsc_refine_calibration_work to be called periodically and the nested guest to spend a lot of time reading the ACPI timer. However, if the TSC frequency is available from the pvclock page, we can just set X86_FEATURE_TSC_KNOWN_FREQ and avoid the recalibration. 'refine' operation. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Peng Hao <peng.hao2@zte.com.cn> [Commit message rewritten. - Paolo] Signed-off-by:
-
David Lechner authored
[ Upstream commit 3a9b0455 ] This driver can spam the kernel log with multiple messages of: net eth0: eth0: allmulti set Usually 4 or 8 at a time (probably because of using ConnMan). This message doesn't seem useful, so let's demote it from dev_info() to dev_dbg(). Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
-
Alexander Sverdlin authored
[ Upstream commit 4aac0b43 ] octeon_mgmt driver doesn't drop RX frames that are 1-4 bytes bigger than MTU set for the corresponding interface. The problem is in the AGL_GMX_RX0/1_FRM_MAX register setting, which should not account for VLAN tagging. According to Octeon HW manual: "For tagged frames, MAX increases by four bytes for each VLAN found up to a maximum of two VLANs, or MAX + 8 bytes." OCTEON_FRAME_HEADER_LEN "define" is fine for ring buffer management, but should not be used for AGL_GMX_RX0/1_FRM_MAX. The problem could be easily reproduced using "ping" command. If affected system has default MTU 1500, other host (having MTU >= 1504) can successfully "ping" the affected system with payload size 1473-1476, resulting in IP packets of size 1501-1504 accepted by the mgmt driver. Fixed system still accepts IP packets of 1500 bytes even with VLAN tagging, because the limits are lifted in HW as expected, for every VLAN tag. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit 665d4953 ] In commit ac0b4145 ("btrfs: scrub: Don't use inode pages for device replace") we removed the branch of copy_nocow_pages() to avoid corruption for compressed nodatasum extents. However above commit only solves the problem in scrub_extent(), if during scrub_pages() we failed to read some pages, sctx->no_io_error_seen will be non-zero and we go to fixup function scrub_handle_errored_block(). In scrub_handle_errored_block(), for sctx without csum (no matter if we're doing replace or scrub) we go to scrub_fixup_nodatasum() routine, which does the similar thing with copy_nocow_pages(), but does it without the extra check in copy_nocow_pages() routine. So for test cases like btrfs/100, where we emulate read errors during replace/scrub, we could corrupt compressed extent data again. This patch will fix it just by avoiding any "optimization" for nodatasum, just falls back to the normal fixup routine by try read from any good copy. This also solves WARN_ON() or dead lock caused by lame backref iteration in scrub_fixup_nodatasum() routine. The deadlock or WARN_ON() won't be triggered before commit ac0b4145 ("btrfs: scrub: Don't use inode pages for device replace") since copy_nocow_pages() have better locking and extra check for data extent, and it's already doing the fixup work by try to read data from any good copy, so it won't go scrub_fixup_nodatasum() anyway. This patch disables the faulty code and will be removed completely in a followup patch. Fixes: ac0b4145 ("btrfs: scrub: Don't use inode pages for device replace") Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
John Allen authored
[ Upstream commit 3578a7ec ] Testing has uncovered a failure case that is not handled properly. In the event that a login fails and we are not able to recover on the spot, we return 0 from do_reset, preventing any error recovery code from being triggered. Additionally, the state is set to "probed" meaning that when we are able to trigger the error recovery, the driver always comes up in the probed state. To handle the case properly, we need to return a failure code here and set the adapter state to the state that we entered the reset in indicating the state that we would like to come out of the recovery reset in. Signed-off-by:
John Allen <jallen@linux.vnet.ibm.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit c1334597 ] CC [M] drivers/net/ethernet/freescale/fman/fman.o In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35: ../include/linux/fsl/guts.h: In function 'guts_set_dmacr': ../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration] clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); ^~~~~~~~~~~~~~~ Signed-off-by:
-
Stephen Hemminger authored
[ Upstream commit 916c5e14 ] The netvsc device may need to fallback to running in single queue mode if host side only wants to support single queue. Recent change for handling mtu broke this in setup logic. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 3ffe64f1 ("hv_netvsc: split sub-channel setup into async and sync") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 7f073d01 ] The bo array has req->nr_buffers elements so the > should be >= so we don't read beyond the end of the array. Fixes: a1606a95 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16") Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit c29e9da5 ] platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap_nocache(e1, res->start, e2); Fixes: cc4fa83f ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit f90a21c8 ] The > comparisons should be >= or else we read beyond the end of the pinctrl->functions[] array. Fixes: cc4fa83f ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by:
-
Paul Cercueil authored
[ Upstream commit 0084a786 ] The .gpio_set_direction() callback was setting inverted direction for SoCs older than the JZ4770, this restores the correct behaviour. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
-
