Skip to content

L
linux
Switch branch/tag
  1. 26 May, 2019 29 commits
  3. 25 May, 2019 7 commits
    • David S. Miller's avatar
      Merge branch 'net-mvpp2-Classifier-updates-RSS' · cecd7582
      David S. Miller authored 
      Maxime Chevallier says:

====================
net: mvpp2: Classifier updates, RSS

Here is a set of updates for the PPv2 classifier, the main feature being
the support for steering to RSS contexts, to leverage all the available
RSS tables in the controller.

The first two patches are non-critical fixes for the classifier, the
first one prevents us from allocating too much room to store the
classification rules, the second one configuring the C2 engine as
suggested by the PPv2 functionnal specs.

Patches 3 to 5 introduce support for RSS contexts in mvpp2, allowing us
to steer traffic to dedicated RSS tables.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cecd7582
    • Maxime Chevallier's avatar
      net: mvpp2: cls: Support steering to RSS contexts · 14134773
      Maxime Chevallier authored 
      When steering to an RXQ, we can perform an extra RSS step to assign a
queue from an RSS table.

This is done by setting the RSS_EN attribute in the C2 engine. In that
case, the RXQ that is assigned is the global RSS context id, that is
then translated to an RSS table using the RXQ2RSS table.

An example using ethtool to steer to RXQ 2 and 3 would be :

ethtool -X eth0 weight 0 0 1 1 context new

(This would print the allocated context id, let's say it's 1)

ethtool -N eth0 flow-type udp4 dst-port 1234 context 1 loc 0

The hash parameters are the ones that are globally configured for RSS :

ethtool -N eth0 rx-flow-hash udp4 sdfn

When an RSS context is removed while there are active classification
rules using this context, these rules are removed.
Signed-off-by: default avatarMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      14134773
    • Maxime Chevallier's avatar
      net: mvpp2: cls: Extract the RSS context when parsing the ethtool rule · c561da68
      Maxime Chevallier authored 
      ethtool_rx_flow_rule_create takes into parameter the ethtool flow spec,
which doesn't contain the rss context id. We therefore need to extract
it ourself before parsing the ethtool rule.

The FLOW_RSS flag is only set in info->fs.flow_type, and not
info->flow_type.
Signed-off-by: default avatarMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c561da68
    • Maxime Chevallier's avatar
      net: mvpp2: cls: Use RSS contexts to handle RSS tables · 895586d5
      Maxime Chevallier authored 
      The PPv2 controller has 8 RSS tables that are shared across all ports on
a given PPv2 instance. The previous implementation allocated one table
per port, leaving others unused.

By using RSS contexts, we can make use of multiple RSS tables per
port, one being the default table (always id 0), the other ones being
used as destinations for flow steering, in the same way as rx rings.

This commit introduces RSS contexts management in the PPv2 driver. We
always reserve one table per port, allocated when the port is probed.

The global table list is stored in the struct mvpp2, as it's a global
resource. Each port then maintains a list of indices in that global
table, that way each port can have it's own numbering scheme starting
from 0.

One limitation that seems unavoidable is that the hashing parameters are
shared across all RSS contexts for a given port. Hashing parameters for
ctx 0 will be applied to all contexts.
Signed-off-by: default avatarMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      895586d5
    • Maxime Chevallier's avatar
      net: mvpp2: cls: Bypass C2 internals FIFOs at init · e8486ca9
      Maxime Chevallier authored 
      The C2 TCAM has internal FIFOs that are only useful for the built-in
self-tests. Disable these FIFOS at init, as recommended in the
functionnal specs.
Suggested-by: default avatarAlan Winkowski <walan@marvell.com>
Signed-off-by: default avatarMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e8486ca9
    • Maxime Chevallier's avatar
      net: mvpp2: cls: Use the correct number of rules in various places · ae8e1d5e
      Maxime Chevallier authored 
      As of today, the classification offload implementation only supports 4
different rules to be offloaded. This number has been hardcoded in the
rule insertion function, and the wrong define is being used elsewhere.

Use the correct #define everywhere to make sure we always check for the
correct number of rules.
Signed-off-by: default avatarMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ae8e1d5e
    • Gustavo A. R. Silva's avatar
      flow_offload: use struct_size() in kzalloc() · 6dca9360
      Gustavo A. R. Silva authored 
      One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
   int stuff;
   struct boo entry[];
};

instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.
Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6dca9360
  5. 24 May, 2019 4 commits
    • David S. Miller's avatar
      Merge branch 'net-stmmac-Improvements-and-Selftests' · 22942498
      David S. Miller authored 
      Jose Abreu says:

====================
net: stmmac: Improvements and Selftests

[ Thanks to the introducion of selftests this series ended up being a misc
of improvements and the selftests additions per-se. ]

This introduces selftests support in stmmac driver. We add 9 basic sanity
checks and MAC loopback support for all cores within the driver. This way
more tests can easily be added in the future and can be run in virtually
any MAC/GMAC/QoS/XGMAC platform.

Having this we can find regressions and missing features in the driver
while at the same time we can check if the IP is correctly working.

We have been using this for some time now and I do have more tests to
submit in the feature. My experience is that although writing the tests
adds more development time, the gain results are obvious.

I let this feature optional within the driver under a Kconfig option.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      22942498
    • Jose Abreu's avatar
      net: stmmac: Prevent missing interrupts when running NAPI · a976ca79
      Jose Abreu authored 
      When we trigger NAPI we are disabling interrupts but in case we receive
or send a packet in the meantime, as interrupts are disabled, we will
miss this event.

Trigger both NAPI instances (RX and TX) when at least one event happens
so that we don't miss any interrupts.
Signed-off-by: default avatarJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a976ca79
    • Jose Abreu's avatar
      net: stmmac: dwmac4/5: Clear unused address entries · 0620ec6c
      Jose Abreu authored 
      In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.

Found out while running stmmac selftests.
Signed-off-by: default avatarJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0620ec6c
    • Jose Abreu's avatar
      net: stmmac: dwxgmac2: Do not disable whole RX in dma_stop_rx() · eaabcd9e
      Jose Abreu authored 
      We don't need to disable the whole RX when dma_stop_rx() is called
because there may be the need of just disabling 1 DMA channel.

This is also needed for stmmac Flow Control selftest.
Signed-off-by: default avatarJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eaabcd9e
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7