- 02 Dec, 2022 13 commits
-
-
Nicholas Piggin authored
Define a constant rather than open-code the offset for the "regs" marker. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-9-npiggin@gmail.com
-
Nicholas Piggin authored
This is a common offset that currently uses the overloaded STACK_FRAME_OVERHEAD constant. It's easier to read and more flexible to use a specific regs offset for this. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-8-npiggin@gmail.com
-
Nicholas Piggin authored
Adjust the pt_regs pointer so the interrupt frame offsets can be used to save registers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-7-npiggin@gmail.com
-
Nicholas Piggin authored
This call may use the min size stack frame. The scratch space used is in the caller's parameter area frame, not this function's frame. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-6-npiggin@gmail.com
-
Nicholas Piggin authored
This makes it a bit clearer where the stack frame is created, and will allow easier use of some of the stack offset constants in a later change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-5-npiggin@gmail.com
-
Nicholas Piggin authored
The interrupt frame detection and loads from the hypothetical pt_regs are not bounds-checked. The next-frame validation only bounds-checks STACK_FRAME_OVERHEAD, which does not include the pt_regs. Add another test for this. The user could set r1 to be equal to the address matching the first interrupt frame - STACK_INT_FRAME_SIZE, which is in the previous page due to the kernel redzone, and induce the kernel to load the marker from there. Possibly this could cause a crash at least. If the user could induce the previous page to contain a valid marker, then it might be able to direct perf to read specific memory addresses in a way that could be transmitted back to the user in the perf data. Fixes: 20002ded ("perf_counter: powerpc: Add callchain support") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-4-npiggin@gmail.com
-
Nicholas Piggin authored
These are now unused. Remove. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-3-npiggin@gmail.com
-
Nicholas Piggin authored
Provide an option to build big-endian kernels using the ELFv2 ABI. This works on GCC only for now. Clang is rumored to support this, but core build files need updating first, at least. This gives big-endian kernels useful advantages of the ELFv2 ABI, e.g., less stack usage, -mprofile-kernel support, better compatibility with eBPF tools. BE+ELFv2 is not officially supported by the GNU toolchain, but it works fine in testing and has been used by some userspace for some time (e.g., Void Linux). Tested-by: Michal Suchánek <msuchanek@suse.de> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221128041539.1742489-5-npiggin@gmail.com
-
Nicholas Piggin authored
This allows asm generation for big-endian ELFv2 builds. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221128041539.1742489-4-npiggin@gmail.com
-
Nicholas Piggin authored
Override the generic module ELF check to provide a check for the ELF ABI version. This becomes important if we allow big-endian ELF ABI V2 builds but it doesn't hurt to check now. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221128041539.1742489-3-npiggin@gmail.com
-
Nicholas Piggin authored
The elf_check_arch() function is also used to test compatibility of usermode binaries. Kernel modules may have more specific requirements, for example powerpc would like to test for ABI version compatibility. Add a weak module_elf_check_arch() that defaults to true, and call it from elf_validity_check(). Signed-off-by: Jessica Yu <jeyu@kernel.org> [np: added changelog, adjust name, rebase] Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221128041539.1742489-2-npiggin@gmail.com
-
Benjamin Gray authored
With the temp mm context support, there are CPU local variables to hold the patch address and pte. Use these in the non-temp mm path as well instead of adding a level of indirection through the text_poke_area vm_struct and pointer chasing the pte. As both paths use these fields now, there is no need to let unreferenced variables be dropped by the compiler, so it is cleaner to merge them into a single context struct. This has the additional benefit of removing a redundant CPU local pointer, as only one of cpu_patching_mm / text_poke_area is ever used, while remaining well-typed. It also groups each CPU's data into a single cacheline. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> [mpe: Shorten name to 'area' as suggested by Christophe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221109045112.187069-10-bgray@linux.ibm.com
-
Christopher M. Riedl authored
x86 supports the notion of a temporary mm which restricts access to temporary PTEs to a single CPU. A temporary mm is useful for situations where a CPU needs to perform sensitive operations (such as patching a STRICT_KERNEL_RWX kernel) requiring temporary mappings without exposing said mappings to other CPUs. Another benefit is that other CPU TLBs do not need to be flushed when the temporary mm is torn down. Mappings in the temporary mm can be set in the userspace portion of the address-space. Interrupts must be disabled while the temporary mm is in use. HW breakpoints, which may have been set by userspace as watchpoints on addresses now within the temporary mm, are saved and disabled when loading the temporary mm. The HW breakpoints are restored when unloading the temporary mm. All HW breakpoints are indiscriminately disabled while the temporary mm is in use - this may include breakpoints set by perf. Use the `poking_init` init hook to prepare a temporary mm and patching address. Initialize the temporary mm using mm_alloc(). Choose a randomized patching address inside the temporary mm userspace address space. The patching address is randomized between PAGE_SIZE and DEFAULT_MAP_WINDOW-PAGE_SIZE. Bits of entropy with 64K page size on BOOK3S_64: bits of entropy = log2(DEFAULT_MAP_WINDOW_USER64 / PAGE_SIZE) PAGE_SIZE=64K, DEFAULT_MAP_WINDOW_USER64=128TB bits of entropy = log2(128TB / 64K) bits of entropy = 31 The upper limit is DEFAULT_MAP_WINDOW due to how the Book3s64 Hash MMU operates - by default the space above DEFAULT_MAP_WINDOW is not available. Currently the Hash MMU does not use a temporary mm so technically this upper limit isn't necessary; however, a larger randomization range does not further "harden" this overall approach and future work may introduce patching with a temporary mm on Hash as well. Randomization occurs only once during initialization for each CPU as it comes online. The patching page is mapped with PAGE_KERNEL to set EAA[0] for the PTE which ignores the AMR (so no need to unlock/lock KUAP) according to PowerISA v3.0b Figure 35 on Radix. Based on x86 implementation: commit 4fc19708 ("x86/alternatives: Initialize temporary mm for patching") and: commit b3fd8e83 ("x86/alternatives: Use temporary mm for text poking") From: Benjamin Gray <bgray@linux.ibm.com> Synchronisation is done according to ISA 3.1B Book 3 Chapter 13 "Synchronization Requirements for Context Alterations". Switching the mm is a change to the PID, which requires a CSI before and after the change, and a hwsync between the last instruction that performs address translation for an associated storage access. Instruction fetch is an associated storage access, but the instruction address mappings are not being changed, so it should not matter which context they use. We must still perform a hwsync to guard arbitrary prior code that may have accessed a userspace address. TLB invalidation is local and VA specific. Local because only this core used the patching mm, and VA specific because we only care that the writable mapping is purged. Leaving the other mappings intact is more efficient, especially when performing many code patches in a row (e.g., as ftrace would). Signed-off-by: Christopher M. Riedl <cmr@bluescreens.de> Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> [mpe: Use mm_alloc() per 107b6828a7cd ("x86/mm: Use mm_alloc() in poking_init()")] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221109045112.187069-9-bgray@linux.ibm.com
-
- 30 Nov, 2022 16 commits
-
-
Benjamin Gray authored
Adds a local TLB flush operation that works given an mm_struct, VA to flush, and page size representation. Most implementations mirror the surrounding code. The book3s/32/tlbflush.h implementation is left as a BUILD_BUG because it is more complicated and not required for anything as yet. This removes the need to create a vm_area_struct, which the temporary patching mm work does not need. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221109045112.187069-8-bgray@linux.ibm.com
-
Benjamin Gray authored
These functions were introduced for "cxl: Enable global TLBIs for cxl contexts" [1], which ended up using them for Radix only. They were never implemented on Hash (and creating an implementation appears to be difficult), so nothing can actually rely on them. They behave differently to the existing surrounding functions too, in that they actually need to do something on Hash. The other functions are primarily for use in generic code that expects their definitions, but Hash updates the TLB during PTE updates. After replacing the only usage with the Radix specific version, there are no more users of these functions, and given they are not implemented anyway it is safe to delete them. [1]: https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20170903181513.29635-1-fbarrat@linux.vnet.ibm.com/Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221109045112.187069-7-bgray@linux.ibm.com
-
Benjamin Gray authored
The generic implementation of this function isn't really generic (Hash is not implemented). Unfortunately, the runtime warnings cannot be replaced with BUILD_BUG's, so it seems safer not to provide a stub in the first place. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221109045112.187069-6-bgray@linux.ibm.com
-
Benjamin Gray authored
The empty hash__* functions are unnecessary. The empty definitions were introduced when 64-bit Hash support was added, as the functions were still used in generic code. These empty definitions were prefixed with hash__ when Radix support was added, and new wrappers with the original names were added that selected the Radix or Hash version based on radix_enabled(). But the hash__ prefixed functions were not part of a public interface, so there is no need to include them for compatibility with anything. Generic code will use the non-prefixed wrappers, and Hash specific code will know that there is no point in calling them (or even worse, call them and expect them to do something). Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221109045112.187069-5-bgray@linux.ibm.com
-
Benjamin Gray authored
BUG_ON() when failing to initialise the code patching window is unnecessary, and use of BUG_ON is discouraged. We don't set poking_init_done in this case, so failure to init the boot CPU will result in a strict RWX error when a following patch_instruction uses raw_patch_instruction. If it only fails for later CPUs, they won't be onlined in the first place. The return value of cpuhp_setup_state() is also >= 0 on success, so check for < 0. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221109045112.187069-3-bgray@linux.ibm.com
-
Jordan Niethe authored
For the coming temporary mm used for instruction patching, the breakpoint registers need to be cleared to prevent them from accidentally being triggered. As soon as the patching is done, the breakpoints will be restored. The breakpoint state is stored in the per-cpu variable current_brk[]. Add a suspend_breakpoints() function which will clear the breakpoint registers without touching the state in current_brk[]. Add a pair function restore_breakpoints() which will move the state in current_brk[] back to the registers. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221109045112.187069-2-bgray@linux.ibm.com
-
Pali Rohár authored
If there's no PCI host bridge with ISA then check for PCI host bridge with alias "pci0" (first PCI host bridge) and if it exists then choose it as the primary PCI host bridge. This makes choice of primary PCI host bridge more stable across boots and updates as the last fallback candidate for primary PCI host bridge (if there is no choice) is selected arbitrary. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220820123327.20551-1-pali@kernel.org
-
Pali Rohár authored
Channel 0 of SA56004ED chip refers to internal SA56004ED chip sensor (chip itself is located on the board) and channel 1 of SA56004ED chip refers to external sensor which is connected to temperature diode of the P2020 CPU. Fixes: 54c15ec3 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930123901.10251-1-pali@kernel.org
-
Thomas Weißschuh authored
Commit 7ad4bd88 ("powerpc/book3e: get rid of #include <generated/compile.h>") removed the usage of the define UTS_RELEASE but forgot to drop the include. utsrelease.h is potentially generated on each build. By removing the unused include we can get rid of some spurious recompilations. Fixes: 7ad4bd88 ("powerpc/book3e: get rid of #include <generated/compile.h>") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Fix typo in change log and add more explanation] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221126051002.123199-2-linux@weissschuh.net
-
Naveen N. Rao authored
For systemwide tests, use online cpu mask to only open events on online cpus. This enables this test to work on systems in lower SMT modes. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/15fd447dcefd19945a7d31f0a475349f548a3603.1669096083.git.naveen.n.rao@linux.vnet.ibm.com
-
Naveen N. Rao authored
The systemwide perf hardware breakpoint test tries to open a perf event on each cpu. On large systems, we run out of file descriptors and fail the test. Instead, have the test set the file descriptor limit to an arbitraty high value. Reported-by: Rohan Deshpande <rohan_d@linux.vnet.ibm.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/187fed5843cecc1e5066677b6296ee88337d7bef.1669096083.git.naveen.n.rao@linux.vnet.ibm.com
-
Naveen N. Rao authored
Right now, if perf_event_open() fails for the systemwide tests, error report is printed too late, sometimes after subsequent system calls. Move use of perror() to the main function, just after the syscall. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/372ac78c27899f1f612fbd6ac796604a4a9310aa.1669096083.git.naveen.n.rao@linux.vnet.ibm.com
-
Christoph Hellwig authored
ps3_system_bus_type is only used inside of system-bus.c, so remove the external declaration and the very outdated comment next to it. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221122072225.423432-1-hch@lst.de
-
Michael Ellerman authored
Merge our fixes branch to bring in some changes that are prerequisites for work in next.
-
Michael Ellerman authored
Merge our KVM topic branch.
-
Nicholas Piggin authored
32-bit does not trace_irqs_off() to match the trace_irqs_on() call in kvmppc_fix_ee_before_entry(). This can lead to irqs being enabled twice in the trace, and the irqs-off region between guest exit and the host enabling local irqs again is not properly traced. 64-bit code does call this, but from asm code where volatiles are live and so incorrectly get clobbered. Move the irq reconcile into C to fix both problems. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-2-npiggin@gmail.com
-
- 25 Nov, 2022 1 commit
-
-
Michael Ellerman authored
There's no declaration for machine_check_early_boot(), which leads to a build failure with W=1. Add one. Fixes: 2f5182cf ("powerpc/64s: early boot machine check handler") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221125132521.2167039-1-mpe@ellerman.id.au
-
- 24 Nov, 2022 10 commits
-
-
Tiezhu Yang authored
The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this up by moving the related file to use "grep -E" instead. sed -i "s/egrep/grep -E/g" `grep egrep -rwl arch/powerpc` Here are the steps to install the latest grep: wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1668764429-11540-1-git-send-email-yangtiezhu@loongson.cn
-
Nayna Jain authored
Even though plpks_read_var() is currently called to read variables owned by different consumers, it internally supports only OS consumer. Fix plpks_read_var() to handle different consumers correctly. Fixes: 2454a7af ("powerpc/pseries: define driver for Platform KeyStore") Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221106205839.600442-7-nayna@linux.ibm.com
-
Nayna Jain authored
Replace kmalloc with kzalloc in construct_auth() function to default initialize structure with zeroes. Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221106205839.600442-6-nayna@linux.ibm.com
-
Nayna Jain authored
Logging H_CALL return codes in PLPKS driver are easy to confuse with Linux error codes. Let the caller of the function log the converted linux error code. Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221106205839.600442-5-nayna@linux.ibm.com
-
Nayna Jain authored
Some commands for eg. "cat" might continue to retry on encountering EINTR. This is not expected for original error code H_ABORTED. Map H_ABORTED to more relevant Linux error code EIO. Fixes: 2454a7af ("powerpc/pseries: define driver for Platform KeyStore") Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221106205839.600442-4-nayna@linux.ibm.com
-
Nayna Jain authored
PAPR Spec defines H_P1 actually as H_PARAMETER and maps H_ABORTED to a different numerical value. Fix the error codes as per PAPR Specification. Fixes: 2454a7af ("powerpc/pseries: define driver for Platform KeyStore") Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221106205839.600442-3-nayna@linux.ibm.com
-
Nayna Jain authored
OS_VAR_LINUX enum in PLPKS driver should be 0x02 instead of 0x01. Fixes: 2454a7af ("powerpc/pseries: define driver for Platform KeyStore") Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221106205839.600442-2-nayna@linux.ibm.com
-
Chen Lifu authored
1. ppc_override_l2cr and ppc_override_l2cr_value are only used in l2cr_init() function, remove them and used *l2cr directly. 2. has_l2cache is not used outside of the file, so mark it static and do not initialise statics to 0. Fixes the following warnings: arch/powerpc/platforms/powermac/setup.c:73:5: warning: symbol 'ppc_override_l2cr' was not declared. Should it be static? arch/powerpc/platforms/powermac/setup.c:74:5: warning: symbol 'ppc_override_l2cr_value' was not declared. Should it be static? arch/powerpc/platforms/powermac/setup.c:75:5: warning: symbol 'has_l2cache' was not declared. Should it be static? Signed-off-by: Chen Lifu <chenlifu@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Unwrap printk string] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221103070122.340773-1-chenlifu@huawei.com
-
Bo Liu authored
Fixes the following W=1 kernel build warning(s): arch/powerpc/platforms/pseries/eeh_pseries.c:163: warning: Function parameter or member 'config_addr' not described in 'pseries_eeh_phb_reset' arch/powerpc/platforms/pseries/eeh_pseries.c:163: warning: Excess function parameter 'config_adddr' description in 'pseries_eeh_phb_reset' arch/powerpc/platforms/pseries/eeh_pseries.c:198: warning: Function parameter or member 'config_addr' not described in 'pseries_eeh_phb_configure_bridge' arch/powerpc/platforms/pseries/eeh_pseries.c:198: warning: Excess function parameter 'config_adddr' description in 'pseries_eeh_phb_configure_bridge' Signed-off-by: Bo Liu <liubo03@inspur.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221031063706.2770-1-liubo03@inspur.com
-
Russell Currey authored
In hw_breakpoint_handler(), ea is set by wp_get_instr_detail() except for 8xx, leading the variable to be passed uninitialised to wp_check_constraints(). This is safe as wp_check_constraints() returns early without using ea, so just set it to make the compiler happy. Signed-off-by: Russell Currey <ruscur@russell.cc> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221024041346.103608-1-ruscur@russell.cc
-