- 27 Aug, 2019 1 commit
-
-
Jisheng Zhang authored
SY8824C is an I2C-controlled adjustable voltage regulator made by Silergy Corp. Add its device tree binding. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20190827163341.61df63a7@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 15 Aug, 2019 4 commits
-
-
Raag Jadav authored
Implement ->set_mode(), ->get_mode() and ->set_suspend_xx() hooks for act8865 with unlocked expert registers. Based on work done by Borris Brezillon on [1]. [1] https://www.spinics.net/lists/kernel/msg2942960.htmlSigned-off-by: Raag Jadav <raagjadav@gmail.com> Link: https://lore.kernel.org/r/1565721176-8955-2-git-send-email-raagjadav@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Nishka Dasgupta authored
In function of_get_child_regulator(), the loop for_each_child_of_node() contains two mid-loop return statements, each preceded by a statement putting child. In order to reduce this repetition, create a new label, err_node_put, that puts child and then returns the required value; edit the mid-loop return blocks to instead go to this new label. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190815053704.32156-1-nishkadg.linux@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Raag Jadav authored
Add documentation for act8865 regulator modes and suspend states. Add active-semi,8865-regulator.h file for device tree binding constants for act8865 regulators. Signed-off-by: Raag Jadav <raagjadav@gmail.com> Link: https://lore.kernel.org/r/1565721176-8955-3-git-send-email-raagjadav@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Colin Ian King authored
Variable ret is initialized to a value that is never read before a return statement and hence can be removed. Remove it. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190813133114.14931-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 09 Aug, 2019 7 commits
-
-
Gregory CLEMENT authored
During reset the VMMC regulator doesn't reach 0V and only drops to 1.8V, furthermore the pulse width is under 200us whereas the SD specification expect 1ms. The WR_S bit allows the TWL6030 to no reset at all the VMMC during warm reset and keep the current voltage. Thanks to this workaround the SD card doesn't reach a undefined reset stage. Actually this behavior is available for all the LDO regulator, so the driver will also allow to use it with any of these regulator. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20190725094542.16547-4-gregory.clement@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Gregory CLEMENT authored
Instead of refering the full pdev->dev.of_node use a local variable. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20190725094542.16547-3-gregory.clement@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Gregory CLEMENT authored
During reset the VMMC regulator doesn't reach 0V and only drops to 1.8V, furthermore the pulse width is under 200us whereas the SD specification expect 1ms. For this 2 reasons being able to no reset at all the VMMC during warm reset and keep the current voltage is a good workaround. The TWL6030 allows this but needs to be aware of it and this configuration should also be shared with the bootloader. This is the purpose of this new property: ti,retain-on-reset Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20190725094542.16547-2-gregory.clement@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
Add the PMIC5 modes and use them pmic5 ldo and smps Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190809073616.1235-4-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
pmic5_bob voltages count is 136 [0,135] so update it Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190809073616.1235-3-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
It helps to keep sorted order for compatibles, so sort them Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190809073616.1235-2-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
It helps to keep sorted order for compatibles and nodes, so sort them Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190809073616.1235-1-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 08 Aug, 2019 3 commits
-
-
YueHaibing authored
Building without CONFIG_POWER_SUPPLY will fail: drivers/regulator/act8865-regulator.o: In function `act8865_pmic_probe': act8865-regulator.c:(.text+0x357): undefined reference to `devm_power_supply_register' drivers/regulator/act8865-regulator.o: In function `act8600_charger_get_property': act8865-regulator.c:(.text+0x3f1): undefined reference to `power_supply_get_drvdata' Add POWER_SUPPLY dependency to Kconfig. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 2d09a79b ("regulator: act8865: Add support for act8600 charger") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190807133822.67124-1-yuehaibing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
Add support from RPMH regulators found in SM8150 platform Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190808093343.5600-2-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
Add PM8150, PM8150L and PM8009 compatibles for these PMICs found in some Qualcomm platforms. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190808093343.5600-1-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 05 Aug, 2019 1 commit
-
-
Nishka Dasgupta authored
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in two places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190804162023.5673-1-nishkadg.linux@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 02 Aug, 2019 1 commit
-
-
Stephen Boyd authored
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-38-swboyd@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 25 Jul, 2019 1 commit
-
-
kbuild test robot authored
drivers/regulator/act8865-regulator.c:447:8-14: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: 2d09a79b ("regulator: act8865: Add support for act8600 charger") CC: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: kbuild test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20190724092236.witxtfmubun25l2t@1905cc33b6ddSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 23 Jul, 2019 4 commits
-
-
Michał Mirosław authored
AC8865 has internal 1.5k pull-down resistor that can be enabled when LDO is shut down. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/d7338f0dfcac63eb958a6b5e42e2d540b3d3f54a.1563898936.git.mirq-linux@rere.qmqm.plSigned-off-by: Mark Brown <broonie@kernel.org>
-
Michał Mirosław authored
Rename act8865_ldo_ops to act8865_fixed_ldo_ops to make room for variable-output LDO ops change. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/12b1fe419e93dfe663990009bf1b2fbf630e9934.1563898936.git.mirq-linux@rere.qmqm.plSigned-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
Setting .n_voltages = 1 and .fixed_uV is enough for fixed regulator, remove the redundant .min_uV and .list_voltage settings. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Link: https://lore.kernel.org/r/20190723014102.25103-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Maarten ter Huurne authored
This provides a way to monitor battery charge status via the power supply subsystem. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20190723011418.29143-1-paul@crapouillou.netSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 22 Jul, 2019 3 commits
-
-
Axel Lin authored
-EINVAL is not a valid return value for .of_map_mode, return REGULATOR_MODE_INVALID instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20190711122138.5221-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
According to the datasheet http://www.ti.com/lit/ds/symlink/lm36274.pdf: Table 23. VPOS Bias Register Field Descriptions VPOS[5:0]: VPOS voltage (50-mV steps): VPOS = 4 V + (Code × 50 mV), 6.5 V max 000000 = 4 V 000001 = 4.05 V : 011110 = 5.5 V (Default) : 110010 = 6.5 V 110011 to 111111 map to 6.5 V So the LM36274_LDO_VSEL_MAX should be 0b110010 (0x32). The valid selectors are 0 ... LM36274_LDO_VSEL_MAX, n_voltages should be LM36274_LDO_VSEL_MAX + 1. Similarly, the n_voltages should be LM36274_BOOST_VSEL_MAX + 1 for LM36274_BOOST. Fixes: bff5e807 ("regulator: lm363x: Add support for LM36274") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20190626132632.32629-2-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf Table 20. VPOS Bias Register Field Descriptions VPOS[5:0] Sets the Positive Display Bias (LDO) Voltage (50 mV per step) 000000: 4 V 000001: 4.05 V 000010: 4.1 V .................... 011101: 5.45 V 011110: 5.5 V (Default) 011111: 5.55 V .................... 100111: 5.95 V 101000: 6 V Note: Codes 101001 to 111111 map to 6 V The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage can match the datasheet. Fixes: 3a8d1a73 ("regulator: add LM363X driver") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20190626132632.32629-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 21 Jul, 2019 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
-
Qian Cai authored
The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Rob Herring authored
Now that examples are validated against the DT schema, an error with required 'clocks' property missing is exposed: Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@40020000: gpio@0: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@1000: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@2000: 'clocks' is a required property Add the missing 'clocks' properties to the examples to fix the errors. Fixes: 2c9239c1 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
With the conversion to DT schema, the examples are now compiled with dtc. The ad7124 binding example has the following warning: Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \ Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) There's a default #size-cells and #address-cells values of 1 for examples. For examples needing different values such as this one on a SPI bus, they need to provide a SPI bus parent node. Fixes: 26ae15e6 ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Now that examples are validated against the DT schema, a typo in avia-hx711 example generates a warning: Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property Fix the typo. Fixes: 5150ec3f ("avia-hx711.yaml: transform DT binding to YAML") Cc: Andreas Klinger <ak@it-klinger.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
The schema examples are now validated against the schema itself. The AST2500 pinctrl schema has a couple of errors: Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ pinctrl: aspeed,external-nodes: [[1, 2]] is too short Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
The Aspeed pinctl schema have errors in the 'compatible' schema: Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements Flow style sequences have to be quoted if the vales contain ','. Fix this by using the more common one line per entry formatting. Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937 ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Matching on the 'cpus' node was a bad choice because the schema is incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus schema which checks the general structure, it is also redundant to do so in the Risc-V CPU schema. The downside is one could conceivably mix different architecture's cpu nodes or have typos in the compatible string. The latter problem pretty much exists for every schema. Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Properties which are child node definitions need to have an explict type. Otherwise, a matching (DT) property can silently match when an error is desired. Fix this up tree-wide. Once this is fixed, the meta-schema will enforce this on any child node definitions. Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
-